forked from mirrors/qmk_firmware
10 lines
1.1 KiB
Markdown
10 lines
1.1 KiB
Markdown
# Bonsai C4 template code
|
|
|
|
Currently, the converter for Pro Micro to Bonsai C4 only does pin mapping. This is sufficient for simple keyboards and also a good start for
|
|
incorporating into more advanced keyboards with other features (like RGB, OLED, backlighting, split communiciations, etc.). However, to make
|
|
use of the more advanced features--including using the FRAM and flash memory chip included on Bonsai C4--various peripheral hardware must
|
|
be configured. Pro Micro does not requrie such configuration because such functionality is more limited and hard-wired to specific pins.
|
|
|
|
The code here provides examples that can be used to operate SPI, I2C, PWM, and Serial comms. In addition to using the converter, you will
|
|
need to take code (as-needed) and add it to existing config.h files, or add in new halconf.h and mcuconf.h files. If you are changing which
|
|
pins are used for certain functions, you should verify the new pins support that functionality, and check all assingments to ensure the correct settings are used (including as-applicable driver, channel, PAL (Pin ALternate function) mode, DMA stream, and/or DMA channel).
|