forked from mirrors/qmk_firmware
30 lines
2 KiB
Markdown
30 lines
2 KiB
Markdown
# Lime Keyboard
|
||
|
||
![Lime Keyboard](https://github.com/HellSingCoder/LimeKeyboard/blob/main/media/lime_keyboard.jpeg?raw=true)
|
||
|
||
Lime is a 6×4+6 keys column-staggered split keyboard with encoder and joystick support. Based on [Lily58](https://github.com/kata0510/Lily58), [Corne](https://github.com/foostan/crkbd), [Helix](https://github.com/MakotoKurauchi/helix) and [Sofle](https://github.com/josefadamcik/SofleKeyboard) keyboards. This board features a reversible PCB, OLEDs, Underglow and Bluetooth support. The PCB has holes for floating or screwed mounts but can be also mounted with a gasket.
|
||
|
||
The Lime keyboard was created by [HellTM](https://github.com/HellSingCoder) with the help of the QMK and custom keyboard community.
|
||
|
||
Build guide and a build log not available yet
|
||
|
||
* Keyboard Maintainer: [HellSingCoder](https://www.simonepellegrino.com/) (GitHub: [HellTM](https://github.com/HellSingCoder))
|
||
* Hardware Supported: LimeKeyboard PCB, ProMicro
|
||
* Hardware Availability: [PCB & Case Data](https://github.com/HellSingCoder/LimeKeyboard)
|
||
|
||
Make example for this keyboard (after setting up your build environment):
|
||
|
||
make lime:default
|
||
|
||
Flashing example for this keyboard:
|
||
|
||
make lime:default:flash
|
||
|
||
Press reset button on he keyboard when asked. You can do that in 3 ways:
|
||
* **Physical reset button**: Briefly press the button near the TRRS connector on the PCB - if you haven't installed one, short the pads instead
|
||
* **Keycode in layout**: Press the key mapped to `QK_BOOT` (`Lower` + `Raise` + `Esc` on the default layout)
|
||
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
|
||
|
||
Disconnect the first half, connect the second one and repeat the process.
|
||
|
||
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|