27 lines
1.1 KiB
Markdown
27 lines
1.1 KiB
Markdown
# NortonTechPad
|
|
|
|
|
|
|
|
The NortonTechPad is a numpad inspired by the SiCK-Pad,it is also 3D printed and designed to be inexpensive.
|
|
|
|
- Keyboard Maintainer: [NortonTech](https://github.com/NortonTech-Official)
|
|
- Hardware Supported: Pro Micro
|
|
|
|
|
|
Make example for this keyboard (after setting up your build environment):
|
|
|
|
make handwired/nortontechpad:default
|
|
|
|
Flashing example for this keyboard:
|
|
|
|
make handwired/nortontechpad:default:flash
|
|
|
|
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
|
|
|
## Bootloader
|
|
|
|
Enter the bootloader in 3 ways:
|
|
|
|
* **Bootmagic reset**: Hold down the top left key and plug in the keyboard. This will also clear EEPROM, so it is a good first step if the keyboard is misbehaving.
|
|
* **Physical reset button**: Short the GND and RST pins on the Pro Micro with something conductive.
|
|
* **Keycode in layout**: There is no key mapped to `QK_BOOT` in the pre-created keymaps, but you may assign this key in any keymaps you create.
|