forked from mirrors/qmk_firmware
a0f2be18a4
* Add bootloader section to keyboard template * Apply suggestions from code review Co-authored-by: Ryan <fauxpark@gmail.com> Co-authored-by: Ryan <fauxpark@gmail.com>
28 lines
1.4 KiB
Markdown
28 lines
1.4 KiB
Markdown
# %KEYBOARD%
|
|
|
|
|
|
|
|
*A short description of the keyboard/project*
|
|
|
|
* Keyboard Maintainer: [%YOUR_NAME%](https://github.com/yourusername)
|
|
* Hardware Supported: *The PCBs, controllers supported*
|
|
* Hardware Availability: *Links to where you can find this hardware*
|
|
|
|
Make example for this keyboard (after setting up your build environment):
|
|
|
|
make %KEYBOARD%:default
|
|
|
|
Flashing example for this keyboard ([after setting up the bootloadHID flashing environment](https://docs.qmk.fm/#/flashing_bootloadhid))
|
|
|
|
make %KEYBOARD%:default:flash
|
|
|
|
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
|
|
|
## Bootloader
|
|
|
|
Enter the bootloader in 3 ways:
|
|
|
|
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
|
|
* **BootloadHID reset**: Hold down the key connected to the `A0` and `B0` pins on the MCU if it is known (often top left or bottom left) and plug in the keyboard
|
|
* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
|
|
* **Keycode in layout**: Press the key mapped to `RESET` if it is available
|