forked from mirrors/qmk_firmware
18490537a5
Co-authored-by: Drashna Jaelre <drashna@live.com> Co-authored-by: Ryan <fauxpark@gmail.com> Co-authored-by: xia0 <xiao@morgan.net.au>
1.3 KiB
1.3 KiB
snatchpad
A 6-key macropad with 2 rotary encoders intended for use as a pointing device.
In addition to the 3d printed parts and microcontroller, the following hardware is required:
- 4 * 3x3 mm threaded inserts
- 4 * 4mm M3 bolt
- USB daughter board
Make example for this keyboard (after setting up your build environment):
make handwired/snatchpad:default
Flashing example for this keyboard:
make handwired/snatchpad:default:flash
See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.
Bootloader
Enter the bootloader in 3 ways:
- Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
- Physical reset button: Briefly press the button on the back of the PCB - some may have pads you must short instead
- Keycode in layout: Press the key mapped to
RESETif it is available