darkkirb/qmk_firmware
1
0
Fork 0
forked from mirrors/qmk_firmware
Code Issues Pull requests Projects Releases Packages Wiki Activity
qmk_firmware/keyboards/mino/readme.md
Shandon Anderson 5fae1ec9c3
[Keyboard] Add Mino Hotswap PCB (#16664) 
Co-authored-by: Shandon Anderson <shandon@shandon.codes>
2022-03-26 19:02:59 -07:00

1.1 KiB
Raw Blame History

mino

Mino

A 47 key board with a retro twist.

  • Keyboard Maintainer: ShandonCodes
  • Hardware Supported: Mino PCB
  • Hardware Availability: Groupbuy

Bootloader

Enter the bootloader in 3 ways:

  • Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  • Physical reset button: Briefly press the button on the back of the PCB - some may have pads you must short instead
  • Keycode in layout: Press the key mapped to RESET if it is available. For the default keymap it is the middle spacebar on the second layer.

Make example for this keyboard (after setting up your build environment):

make mino/hotswap:default

Flashing example for this keyboard:

make mino/hotswap:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.