forked from mirrors/qmk_firmware
25 lines
No EOL
1.3 KiB
Markdown
25 lines
No EOL
1.3 KiB
Markdown
# Amber80 solder
|
|
|
|
A TKL keyboard sold in several variants.
|
|
|
|
1. [Solder](solder/): 1/2022. Atmega32u4 soldered keyboard. Sold under the name "Amber80" with Amber80 keyboard case. Compatible with Amber80 keyboard case.
|
|
|
|
**Firmware files are SPECIFIC to each board. Firmware files from one, will not work on the other.** Please use the `.hex` or `.bin` appropriate for your board.
|
|
|
|
* Keyboard Maintainer: [SawnsProjects](https://github.com/MaiTheSan)
|
|
* Hardware Supported: Amber80
|
|
* Hardware Availability: Comming Soon
|
|
|
|
Make examples for this keyboard (after setting up your build environment):
|
|
|
|
make sawnsprojects/amber80/solder:default
|
|
|
|
## Bootloader
|
|
|
|
Enter the bootloader in 3 ways:
|
|
|
|
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
|
|
* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
|
|
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
|
|
|
|
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). |