forked from mirrors/qmk_firmware
c0d7a43637
Co-authored-by: jack <0x6a73@protonmail.com> Co-authored-by: Drashna Jaelre <drashna@live.com>
1.1 KiB
1.1 KiB
handwired/jankrp2040dactyl
A budget Dactyl-Manuform build using Raspberry Pi Pico.
- Keyboard Maintainer: Ethan Perry
- Hardware Supported: RP2040 Community Edition
- Hardware Availability: https://www.digikey.com/en/product-highlight/r/raspberry-pi/raspberry-pi-picoboard
Make example for this keyboard (after setting up your build environment):
make handwired/jankrp2040dactyl:default
Flashing example for this keyboard:
make handwired/jankrp2040dactyl:default:flash
See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.
Bootloader
Enter the bootloader in 3 ways:
- Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
- Physical reset button: Briefly press the button on the back of the PCB - some may have pads you must short instead
- Keycode in layout: Press the key mapped to
QK_BOOTif it is available