qmk_firmware/keyboards/3w6/rev2/readme.md
2021-08-19 11:13:00 -07:00

38 lines
1.6 KiB
Markdown

# 3W6
![3W6_rev2](https://raw.githubusercontent.com/weteor/3W6/main/images/3w6_rev2_2s.jpg)
![3W6_rev2](https://raw.githubusercontent.com/weteor/3W6/main/images/3w6_rev2_1s.jpg)
The 3w6 is a low profile, split ortholinear keyboard with 36 keys.
* Rev2:
- onboard microcontroller (ATMega32U4)
- USB-C connector Board <-> PC
- USB-C connectors between both split halfs
- choc spacing (18x17mm)
- aggressive pinky stagger
- support for Choc V1 switches
- files for midplate (1.6 to 2mm)
- support for [Pimoroni Trackball](https://shop.pimoroni.com/products/trackball-breakout) instead of outer thumb switch on right half, needs midplate
- mounting holes for [Tenting Puck](https://splitkb.com/collections/keyboard-parts/products/tenting-puck), only usable without mid or switchplate
---
* Keyboard Maintainer: [weteor](https://github.com/weteor)
* Hardware Supported:
* 3w6 rev2 (with Pimoroni support)
* Hardware Availability:
* make one yourself: [Design and Productionfiles](https://github.com/weteor/3w6)
* maintainer is selling kits when available
---
To reach the bootloader, connect the board to the PC and push the reset button on left half.
Make examples for this keyboard (after setting up your build environment):
make 3w6/rev2:default
make 3w6/rev2:default_pimoroni
---
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).