History

datafx b1c5a53a68 Add bootloader size (#13729 ) * Add bootloader size Bootloader size needs to be 6144 to allow QMK to jump to the correct location with bootmagic * Include dz60rgb v2.1 Add boot loader size to this pcb also		2021-07-27 10:07:29 +10:00
..
keymaps	Fix some RGB Matrix-enabled keymaps referring to RGBLight mode (#13509 )	2021-07-15 03:50:09 +10:00
v1	Set `BOOTLOADER = stm32-dfu` for all applicable STM32 boards (#12956 )	2021-06-08 19:48:46 +10:00
v2	Remove FAUXCLICKY feature (deprecated) (#11829 )	2021-02-09 09:49:05 -08:00
v2_1	Add bootloader size (#13729 )	2021-07-27 10:07:29 +10:00
config.h	Tidy up dztech config.h	2019-12-18 10:23:26 +11:00
dz60rgb.c	Fix compilation warning for the DZ60RGB/DZ65RGB when RGB matrix is disabled (#9791 )	2020-07-22 15:55:35 +10:00
dz60rgb.h	Tidy up dztech keyboard.c/h and readmes (#7664 )	2020-01-14 08:49:31 +11:00
info.json
readme.md	[Keyboard] adds new revision: dztech/dz60rgb/v2_1 (#13636 )	2021-07-22 09:39:08 -07:00

readme.md

DZ60RGB

A hotswap 60% RGB keyboard.

Keyboard Maintainer: moyi4681
Hardware Supported: DZtech DZ60RGB V1 and V2
Hardware Availability: KBDfans

There are three versions of the DZ60RGB. Please use the appropriate firmware for your board.

V1: STM32F303 (Arm), takes .bin files
V2: ATmega32U4 (AVR), takes .hex files
V2.1: ATmega32U4 (AVR), takes .bin files Flash Manual
Started shipping in June 2021 as a slightly modified version of v2.

Make example for this keyboard (after setting up your build environment):

make dztech/dz60rgb/v1:default # Arm (STM32F303)
make dztech/dz60rgb/v2:default # AVR (ATmega32U4)
make dztech/dz60rgb/v2_1:default # AVR (ATmega32U4)

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.