forked from mirrors/qmk_firmware
25 lines
1.2 KiB
Markdown
25 lines
1.2 KiB
Markdown
# Mode M256-WH PCB QMK Firmware
|
|
|
|
|
|
|
|
The M256-WH is the hotswap version PCB support for the Mode Envoy.
|
|
|
|
* Keyboard Maintainer: [Gondolindrim](https://github.com/Gondolindrim)
|
|
* Hardware Supported: proprietary PCBs using the STM32F401 microcontroller;
|
|
* Hardware Availability: as of april 18, these PCBs are on the verge of being sold with the first kits of the Mode Envoy.
|
|
|
|
## How to flash
|
|
|
|
In order to flash this PCB, first build the default layout (after setting up your build environment):
|
|
|
|
make mode/m256wh:default
|
|
|
|
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
|
|
|
## Bootloader
|
|
|
|
Enter the bootloader in 3 ways:
|
|
|
|
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
|
|
* **Physical reset button**: press the button on the back of the PCB for at least five seconds
|
|
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available (escape key, layer 1 of the default keymap)
|