forked from mirrors/qmk_firmware
1.3 KiB
1.3 KiB
DP3000
dp3000 is a simple yet elegant macropad, 2x4 (8 keys), dual encoder, embedded with an Atmel 32u4 chip, powered by QMK.
- Rev. 1 Support RGB matrix
- Rev. 2 Support RGB light (underglow)
- Keyboard Maintainer: Deddia Permana
- Hardware Supported: DP3000 PCB rev1 and rev2, ATmega32u4
- Hardware Availability: tokopedia.com/gundamtricks
Make example for this keyboard (after setting up your build environment):
make dp3000/rev1:default
make dp3000/rev2:default
Flashing example for this keyboard:
make dp3000/rev1:default:flash
make dp3000/rev2:default:flash
See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.
Bootloader
Enter the bootloader in 3 ways:
- Bootmagic reset: Hold down the key at (0,0) in the matrix (left rotary encoder push switch) and plug in the keyboard
- Physical reset button: Briefly press reset button twice, located in front of the first rotary encoder (left rotary encoder)
- Keycode in layout: Press the key mapped to QK_BOOT if it is available