Co-authored-by: jack <0x6a73@protonmail.com>
Co-authored-by: Less/Rikki <86894501+lesshonor@users.noreply.github.com>
Co-authored-by: Ryan <fauxpark@gmail.com>

2023-07-09 20:41:22 -06:00

1.3 KiB

Raw Blame History

DT40

The PCB features:

QMK & VIA compatibility
RGB Matrix backlight
Thin body & Simple keys

The following is the QMK Firmware for the Destop 40% keylayout - designed in Dongguan Jizhi Electronic Technology Co., Ltd

Keyboard Maintainer: JZ-Skyloong
Hardware Supported: DestopPCB for Skyloong keylayout 40%, STM32F103C8T6
Hardware Availability: http://www.skyloong.com.cn

Make example for this keyboard (after setting up your build environment):

make skyloong/dt40:default

Flashing example for this keyboard:

make skyloong/dt40:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

Enter the bootloader in 3 ways:

Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
Physical reset button: Briefly press the button on the back of the PCB - some may have pads you must short instead
Keycode in layout: Press the key mapped to QK_BOOT if it is available

1.3 KiB Raw Blame History

DT40

The PCB features:

Bootloader

1.3 KiB

Raw Blame History