forked from mirrors/qmk_firmware
d70d7815dc
* add matrix_diagram.md * info.json: apply friendly formatting * info.json: correct layout data * rename LAYOUT_all to LAYOUT_65_xt_ansi_split_space_split_bs * add LAYOUT_65_xt_ansi_split_space * add LAYOUT_65_xt_ansi_split_bs * add LAYOUT_65_xt_ansi * update readme.md - convert metadata section to list - update Availability link (mark as "no longer available" as the vendor no longer ships) - add Flashing and Bootloader instructions
23 lines
1.1 KiB
Markdown
23 lines
1.1 KiB
Markdown
# Scarlet Bandana Version IV Mark 2
|
|
|
|
* Keyboard Maintainer: [Cole Markham](https://github.com/colemarkham)
|
|
* Hardware Supported: Scarlet Bandana Version IV Mark 2
|
|
* Hardware Availability: [~~WoodKeys.click~~ (no longer available)](https://woodkeys.click/product/scarlet-bandana-version-iv-mark-2/)
|
|
|
|
Make example for this keyboard (after setting up your build environment):
|
|
|
|
make woodkeys/scarletbandana:default
|
|
|
|
Flashing example for this keyboard:
|
|
|
|
make woodkeys/scarletbandana:default:flash
|
|
|
|
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
|
|
|
## Bootloader
|
|
|
|
Enter the bootloader in 3 ways:
|
|
|
|
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
|
|
* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
|
|
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
|