forked from mirrors/qmk_firmware
30 lines
1.1 KiB
Markdown
30 lines
1.1 KiB
Markdown
# Soulstone
|
|
|
|
|
|
|
|
A hotswap PCB inspired by an elegant [prime_e](https://www.primekb.com/products/prime_e-rev-2-pcb),
|
|
45% ergo keyboard. It is compatible with `rev2` (RGB and non-RGB) which makes it
|
|
fit to any `rev2` compatible case.
|
|
|
|
* Keyboard Maintainer: [Strech](https://github.com/Strech)
|
|
* Hardware Supported: Soulstone
|
|
* Hardware Availability: Coming soon
|
|
|
|
Make example for this keyboard (after setting up your build environment):
|
|
|
|
make strech/soulstone:default
|
|
|
|
Flashing example for this keyboard:
|
|
|
|
make strech/soulstone:default:flash
|
|
|
|
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and
|
|
the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information.
|
|
Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
|
|
|
## Bootloader
|
|
|
|
Enter the bootloader using one of the following methods:
|
|
|
|
* Tap the Reset switch mounted on the PCB
|
|
* Hold down the key at (0,0) in the matrix (usually the top left key or `Escape`) and plug in the keyboard
|