forked from mirrors/qmk_firmware
c91296f001
Co-authored-by: adophoxia <100170946+adophoxia@users.noreply.github.com> Co-authored-by: jack <0x6a73@protonmail.com>
23 lines
1 KiB
Markdown
23 lines
1 KiB
Markdown
# Keyspensory KP60
|
|
|
|
|
|
|
|
* Keyboard Maintainer: [Freather](https://github.com/CMMS-Freather), [d-floe](https://github.com/d-floe)
|
|
* Hardware Supported: PCB, Atmega32u4
|
|
|
|
Make example for this keyboard (after setting up your build environment):
|
|
|
|
make keyspensory/kp60:default
|
|
|
|
Flashing example for this keyboard:
|
|
|
|
make keyspensory/kp60:default:flash
|
|
|
|
|
|
## Bootloader
|
|
Enter the bootloader in 3 ways:
|
|
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
|
|
* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
|
|
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
|
|
|
|
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|