qmk_firmware/keyboards/dp3000/readme.md
2023-09-24 11:04:39 -07:00

1.3 KiB

DP3000

dp3000 macropad

dp3000 is a simple yet elegant macropad, 2x4 (8 keys), dual encoder, embedded with an Atmel 32u4 chip, powered by QMK.

  • Rev. 1 Support RGB matrix
  • Rev. 2 Support RGB light (underglow)
  • Keyboard Maintainer: Deddia Permana
  • Hardware Supported: DP3000 PCB rev1 and rev2, ATmega32u4
  • Hardware Availability: tokopedia.com/gundamtricks

Make example for this keyboard (after setting up your build environment):

make dp3000/rev1:default
make dp3000/rev2:default

Flashing example for this keyboard:

make dp3000/rev1:default:flash
make dp3000/rev2:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

Enter the bootloader in 3 ways:

  • Bootmagic reset: Hold down the key at (0,0) in the matrix (left rotary encoder push switch) and plug in the keyboard
  • Physical reset button: Briefly press reset button twice, located in front of the first rotary encoder (left rotary encoder)
  • Keycode in layout: Press the key mapped to QK_BOOT if it is available