forked from mirrors/qmk_firmware
9d3c0018c1
Co-authored-by: Neil Brian Ramirez <nightlykeyboards@gmail.com> Co-authored-by: Neil Brian Ramirez <nightlyboards@gmail.com>
23 lines
1 KiB
Markdown
23 lines
1 KiB
Markdown
# Bredworks Wyvern HS
|
|
|
|
* Keyboard Maintainer: [DeskDaily](https://github.com/DeskDaily)
|
|
* Hardware Supported: Atmega32u4
|
|
* Hardware Availability: [BredWorks](https://bredworks.com/products/wyvern-hotswap-pcb)
|
|
|
|
Make example for this keyboard (after setting up your build environment):
|
|
|
|
make bredworks/wyvern_hs:default
|
|
|
|
Flashing example for this keyboard:
|
|
|
|
make bredworks/wyvern_hs:default:flash
|
|
|
|
## Bootloader
|
|
|
|
Enter the bootloader in 3 ways:
|
|
|
|
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the upper left key/esc) and plug in the keyboard
|
|
* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
|
|
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
|
|
|
|
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|