forked from mirrors/qmk_firmware
742ff91cf8
Co-authored-by: jack <0x6a73@protonmail.com> Co-authored-by: Álvaro A. Volpato <alvaro.augusto.volpato@gmail.com> Co-authored-by: Joel Challis <git@zvecr.com> Co-authored-by: Ryan <fauxpark@gmail.com>
24 lines
No EOL
1.1 KiB
Markdown
24 lines
No EOL
1.1 KiB
Markdown
# Minerva LX
|
|
|
|
![Minerva LX](https://i.imgur.com/f97nsrx.jpg)
|
|
|
|
The following is the QMK Firmware for the Minerva LX PCB.
|
|
|
|
* Keyboard Maintainer: [Archetype](https://github.com/archetype-made)
|
|
* Hardware Supported: RP2040-based proprietary PCB.
|
|
* Hardware Availability: https://archetypemade.com/minerva-is-here/
|
|
|
|
Make example for this keyboard (after setting up your build environment):
|
|
|
|
make archetype/minervalx:default
|
|
|
|
Flashing example for this keyboard:
|
|
|
|
make archetype/minervalx:default:flash
|
|
|
|
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
|
|
|
## Bootloader Enter the bootloader in 3 ways:
|
|
* **Bootmagic reset**: Hold down the key ESC key and plug in the keyboard (Top Left most switch)
|
|
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if available
|
|
* **Physical Reset Button**: With the PCB unplugged, hold down the button labled `RESET` on the back of the PCB while pluggin in the USB. |