* The code in this directory supports the KBD65
* Update readme.md
* Update readme.md
* Clear up the confusion between the kbd67/kbd65 naming.
* Update keyboards/kbdfans/kbd67/readme.md
Co-Authored-By: Hackerpilot <briancschott@gmail.com>
* initial commit of e6v2 bmc files
* update readme with bmc template and reset key location
* fix up the switch matrix
* add usbconfig.h file
* add i2c files
* cleanup config.h
* cleanup rules.mk and remove non atmega32a architecture code
* add an appropriate keymap for testing
* update readme with warning not to flash this hex file onto atmega32u4 e6v2
* get rgb lights working
* add QMK Configurator support for 60_ansi layout
* add hhkb support layout
* add additional layouts such as tsangan and all and included QMK Configurator support for them
* add bootmagic lite, and have it be set to Esc or the key located at k50
* update readme
* fixup spacing for LAYOUT_all electrical matrix
* add some pragma once magic
* use i2c_master instead of custom i2c.c
* remove the custom i2c.c
* restore a more valid default keymap
* add eep_rst to keymap
* Add kwer keymap and RGB mod description to cypher
* Add custom led_set_user to keymap
* Remove unneccessary include path from keyboards/westfoxtrot/cypher/keymaps/kwer/keymap.c
Co-Authored-By: kwerdenker <sebastian.spindler@gmail.com>
This PR is cherry-pick from 90b9a1aa7d8a in PR #5020.
@MxBlu copied quantum/rgblight.c to keyboards/mxss/rgblight.c on July 8, 2018. At that time, I think it would be better to copy quantum/rgblight.h at the same time.
Because if someone makes a change to `quantum/rgblight.[ch]` that is incompatible with the past, it may cause problems with the compilation of keyboards/mxss.
(Like when I changed the prototype of the `rgblight_effect_XXX()` functions of rgblight.c in PR #5020.)
* copy default over as starting point
* Getting rid of dvorak and colemak for now, added a couple changes to the
keymap
* removed refs to bad layers, formatting comments
* First version of my ergodox ported layout!
* Symbols layer, media layer, updated comments
* Hyper as a single key
* Fix stuck hyper key when switching layers
* Tweak some annoying things about the layout.
- move raise left and promote alt
- remove swap keys on the last layer
- reorganize media keys so they're easier to reach and more intuitive
- fix some comment template things
* Add readme for rjhilgefort planck layout
* readme tweak
* PR feedback changes
* Add support for wiring RGB LEDs for both halves directly to their respective controllers
RGB LEDs for each half don't need to be chained together across the TRRS cable with this
* Add split RGB LED support for serial
* Update config/rules for bakingpy layout
* Un-nest ifdefs for hand detection
* Read RGB config state from memory instead of EEPROM for serial updates
* Reuse existing LED pointer instead of creating new one
* Create custom Planck Light keycap
See README for details
* Link to WhatPulse in README
* More remapping, and add RGB LED effects
* Remove dead code, address PR feedback from drashna
* Adding new tap dance key
* Adding new tap dance code
* add code for copy/paste to tap dance
* testing tap dance enums
* New tap dance keycodes
* Fix enums
* handwired/magicforce61: refactor
Renamed layout macro KEYMAP to LAYOUT.
Keymap now uses #include QMK_KEYBOARD_H.
Refactored the default keymap to use non-auto-prepended keycodes per QMK standard.
Deleted deprecated action_get_macro block (was unused).
* handwired/magicforce61: Configurator support
* handwired/magicforce61: readme cleanup
Restructured the readme to be more similar to current QMK template.
* handwired/magicforce61: replace missing image in readme
Replaced the missing wiring image (error 404) with a table.
* handwired/magicforce61: rename readme to lowercase
* Convert config.h to #pragma once include guard
* introduce stt layout with K(row)(col)
* set bootmagic to lite
* Rename the original LAYOUT to LAYOUT_all
Introduce the STT layout
In additional the whole matrix was changed to support the K(row)(col) notation.
* rename LAYOUT to LAYOUT_all
* add QMK Configurator support
* stt keymap based on mrpetrov's default configuration on the hb85 he lent me
* update readme
* introduce basic and aop layouts along with QMK Configurator support for them
* add a new line
* add EEP_RST to layer 1 as it is needed to get rgb underglow to work
* add documentation on how to reset the eeprom on the board
* put contributors names where appropriate
* added Boy_.314's layout for halfnhalf keyboard
* reset rules.mk to default
* update keymap with qwerty layout, and enable tap dancing
* fixed formatting in layout visualization
* added rules.mk to custom layout
* added mod tap for ctrl/capslock
* fixed typo in config.h, remove excess in rules.mk, revert half_n_half rules.mk
* added Boy_.314's layout for halfnhalf keyboard
* reset rules.mk to default
* update keymap with qwerty layout, and enable tap dancing
* fixed typo in config.h, remove excess in rules.mk, revert half_n_half rules.mk
* added macros to raise layer
* fixed mismatched layout/comments
* fixed layout switching
* Remove unnecessary IS_COMMAND definition from clueboard/66_hotswap/gen1
* Remove old-style IS_COMMAND definition comment from dozen0
* Use get_mods() instead of keyboard_report->mods in georgi
* keymap + alpha
* some fixes
* keymap + alpha
* some fixes
* drashna changes
* linked main Alpha repo in keyboards/alpha readme
* missed a spot
* there's another function called FUNC lol
* keymap + alpha
* some fixes
* keymap + alpha
* drashna changes
* Fixed include
* Revert "Fixed include"
This reverts commit ea92f261f86d8433eab313cde498adca1682a006.
* messed up my git, fixed include
* starting work on TMO50 layout
* Update keyboards/tmo50/keymaps/default/keymap.c
Co-Authored-By: PyrooL <lm11887@gmail.com>
* Updated PyroL's TMO50 keymap
* Added task manager/Ctrl Alt Del that i stole from the eco keymap
* Clean up task manager and ctrl alt del macros
Co-Authored-By: PyrooL <lm11887@gmail.com>
* initial commit
* initial commit
* fixed indents
* spelling, capitalization, and order.
* added dota mode keymap, removed old comments
* fixed default keymap always having tilde, instead of grave accent and tilde. Improved dota keymap.
* lower does not change backspace to delete anymore
* corrected pgup/pgdown
* changed period on lower from numpad dot to regular dot
* added colemak and dvorak
* made colemak/dvorak border keys consistent with querty
* updated to match current practices, added custom metakeys for dvorak and colemak
* added disclaimer about audio
* renamed to lowercase
* replaced include guards with #pragma once
Co-Authored-By: rileyweber13 <rileyw13@protonmail.com>
* removed unncessary include
Co-Authored-By: rileyweber13 <rileyw13@protonmail.com>
* removed defines included in core
Co-Authored-By: rileyweber13 <rileyw13@protonmail.com>
* replace defines with an enum, switched from custom function to set_single_persistent_default_layer
* removed ifndef/include/endif left over from previous build system
* removed unnecessary ifdef block
* updated soungs to work with set_single_persistent_default_layer
* Instant 60
* Instant60 changes again
* turn off LSE and features
* Working RGB underglow 🎉
* Add missing files
* Update keymap to have reset
* Backlighting on
* Backlight code for instant60
* Move 072 files to common folder and use it in Instant60
* Updates
* Update keyboards/cannonkeys/instant60/rules.mk
Co-Authored-By: awkannan <andrew.kannan@klaviyo.com>
* add SCREEN_NAV layer for copy/pasting within screen
* working readreg/paste macros
* working read reg / paste macros
* write log and tran patterns, and expand
* add ls -la shortcut, add tab on combined layer
* put delete word on the right pinky key on shell_nav layer
* add TAB on the right side, add reset key
* added Cloud9 macros
* add cloud9 shortcuts to atreus layout
* added BROWSER_CONTROL layer
* finalized browser control layer
* adding comment
* add browser control layer to atreus
* add flashing command line
* remove the tab on combined layer
* remove the tomouse
* remove mouse layer, change log/tran expand patterns, cleanups
* add dumptlog macro
* add "delete to home" shortcut
* fix conflict
* remove unneeded mouse layer
* add meh shortcuts on the browser_control layer
* add/modify some macros
* explain the various layers
* putty paste is right mouse button
* add android studio shortcuts
* allow switching between base and alternate base layouts
* replace cloud9 shortcuts with android studio
* more android studio shortcuts
* add two meh shortcuts on keynav layer
* additional android studio shortcut
* added defines for android studio
* Updated layout after some months of testing.
The current setup looks quite better than the initial one. It's not
perfect but it allows me to work quite well.
The only big problem is the Alt modifiers on the home row which
sometimes break the typing if keys are pressed too fast. I'm also not
satisfied by the TAB key position on the thumb cluster.
Main improvements since previous push:
- Shift layouts on both halves
- Moved around symbols
- Improved number/fn keys
- Reorganized thumbs
* Used enum as suggested by @drashna :-)
* Corrected column count and adjusted layouts to include missing key
The original version reflected 14 columns and omitted KC_GRV, the 15th key on the top row. This revision adds support for the 15h key, and also updates the default (Tsangan) layout to include the HHKB layer keys.
* Reverted config.h to version in master branch
* Moved K413 to the correct location
* Added info.json
* Update keyboards/1upkeyboards/1up60hte/1up60hte.h
Co-Authored-By: newbold <adam@neatnik.net>
* Update keyboards/1upkeyboards/1up60hte/info.json
Co-Authored-By: newbold <adam@neatnik.net>
* Update keyboards/1upkeyboards/1up60hte/keymaps/default/keymap.c
Co-Authored-By: newbold <adam@neatnik.net>
* Update keyboards/1upkeyboards/1up60hte/keymaps/hhkb/keymap.c
Co-Authored-By: newbold <adam@neatnik.net>
* Update keyboards/1upkeyboards/1up60hte/keymaps/hhkb/keymap.c
Co-Authored-By: newbold <adam@neatnik.net>
* Update keyboards/1upkeyboards/1up60hte/keymaps/default/keymap.c
Co-Authored-By: newbold <adam@neatnik.net>
* fresh commit for a new fork for PR to upstream/master
* gaming mode added, lighting changes for other modes
* rules.mk fixed...
* fixed collision issue with aesthetic and shifty modes
* fixed collision issue with aesthetic and shifty modes
* troubleshooting game mode failing
* moved game tapdance key to default layer, fixed issue
* added my own keymap
* changed thing
* updated keymap Samuel
* updated laypout for better one handed use
* updated stuff I want
* happy with my lagout
* formatting
* Added new literate config
* made everything nice
* cleaned
* fixed spelling and two small bugs in macros
* Made press and lift function for modifiers
* made taps occur on press instead of release
* added oneshot keys and chars cant be negative!
* removed debug message
* Added command and qwerty layers
* fixed bug with oneshot layer
* same bug, different key
* Add nrichers keymap
* Additional keymap tweaks, add readme info
* Improve descriptions for changes from default keymap
* Add image of keymap, update .gitignore to
* Add image link
Adds an image of the modified keymap.
* Improve legibility of keymap changes with colour coding
* Tinker with color codes in Markdown
* Experiment with colour codes
* Tinker more with colour codes
* Figured out the easiest way to include colour coding
* Undo earlier .gitignore change
* Refactor layout macro names
Update the names of the layout macros to reflect QMK's desired usage.
- KEYMAP renamed to LAYOUT
- colinta keymap updated accordingly
- KC_KEYMAP renamed to LAYOUT_kc
- mtdjr keymap updated accordingly
* Update xd75.h to use #pragma once include guard
* Update keymaps to use QMK_KEYBOARD_H
* Refactor default keymap
- updated to use layout macro
- remove deprecated action_get_macro function
- add functions from QMK keymap.c template
- process_record_user
- matrix_init_user
- matrix_scan_user
- led_set_user
* Update supporting files
- updated config.h files to use #pragma once include guard
- remove errant QUANTUM_DIR code block
* Rename readme files to fully lowercase filenames
* Restructure keyboard readme
Updated the readme to better align with the current QMK template.
* Bugfixes to supporting files
* greenshadowmaker keymap for idobo xd75 massdrop
* remove uneeded config.h
* corrected format to match convention instead of xd75 where I accidentally started from
* Use correct functions for dip switch code
* Some planck cleanup
* Hopefully fix RGB Sleeping with RGB Matrix
* Add rgbmatrix extern
* Add numpad 5x6 layout
* RGB Tweaks
* Add RGB startup animation
* Minor RGB Fixes
* Turn off RBG on planck
* Enable separate storage of EEPROM
* Update Macro pad
* Add BJohnson Keymap and minor darshna tweaks
* Clean up rgb and other code for new numpad
* Remove clicky hachy thing
* Update my code to use built in MOD_MASK defines
* Fix up modifier calls
* Tweak to KC_MAKE
* Tweak to KC_MAKE
* Add Semi-colon to numpad
* Preprocess out rgb matrix stuff if not enabled
* Formatting of KC_MAKE
* Add stuff for matrix and light rgb coexistance
* Fix bad spelling
* Change where layer indication shows based on rgblight status
* Force set mods in KC_MAKE
* Optimize CRKBD
* added Boy_.314's layout for halfnhalf keyboard
* reset rules.mk to default
* update keymap with qwerty layout, and enable tap dancing
* fixed formatting in layout visualization
* added rules.mk to custom layout
* added mod tap for ctrl/capslock
* fixed typo in config.h, remove excess in rules.mk, revert half_n_half rules.mk
Added keymap for 60% board 1up60rgb. The map provides VIM-style navigation on a
second layer (L1) with HOME, PGDN, PGUP, and END keys on that same layer one
row below the home row. The layout is used by https://github.com/michaeldye.
* Add satisfaction75 revision 1
* Update manufacturer
* Add tester layout and update rev1 comments
* Add ifdef guards for OLED for tester
* Add oled disabling rules
* Update to save backlight settings and setup for VIA custom config
* Add new VIA values to satisfaction75
* Safety guard in clock set mode
* Fix mistaken doc edit
* Address PR comments
* bring the default back to pass travis CI
* Address further PR comments
* 412_64 move to handwired
412_64 and its second printing, Mark Zero Stand Aside, are now obsolesced by new hardware. As only two units exist in the wild not owned by me, I'm moving the definition to handwired.
* Mark 3 Stand Aside ready for production.
Uploading firmware, compiled and tested, for Mark 3 Stand Aside. The hardware's ready, now the software is too.
* Whoops.
Should've branched before pushing Stand Aside. Sorry 'bout that.
* Revert "Whoops."
This reverts commit d222046cfe6183ed0c42286ec9ebb5034a5d1009.
* Revert "Mark 3 Stand Aside ready for production."
This reverts commit c790899af7a6d92855aebe6a96003f1fe9be66b3.
* Mark 3 Stand Aside ready.
Initial commit for Mark 3 Stand Aside, ready for production.
* Update keyboards/standaside/rules.mk
noroadsleft suggested removal of a line, 'LAYOUTS = ortho_4x16'. I agree.
Co-Authored-By: FateEverywhere <41215461+FateEverywhere@users.noreply.github.com>
* Cleanup for pull request.
Making changes requested by Drashna, as they're all good, and I know way less about the standards than they do.
* Initial cleanup completion.
Missed a few lines in standaside.c, they're cleaned up now.
* Update info.json
Adding layout for the macro version.
* Update info.json
Changed the macro layout to match exactly like the non-macro version (split backspace and bottow row match)
* added my launchpad
* updated keymap with legends and fixed layout errors
* Added default keymap with added layer for RGB controls and included the necessary config code
* fixed layer orders
* removed my personal keymap to clean PR
* missed an underscore
* updated readme
* removed more unnecessary code
* moved RGB code to its own config phone
* moved underglow info to its own readme
* removed redundant code from default_rgb config.h file, included QMK KEYBOARD H in place of initial defines in keymap.c
* reverted launchpad config
* removing the = because I can't figure out why its there
* Revert "removing the = because I can't figure out why its there"
This reverts commit e3b5e6d568e7225635844ba617aaef4f77727ce6.
* reverted rev1/config.h
* reverted all files I should not have touched
* removing redundant code in rules.mk
* readibility improvements to keymap
* Add ISO backslash key position to matrix and keymap files
* Use KC_NO instead of KC_BSLS for unused position in custom keymap
* Add new key position to json layout file used by online configurator
* Get things working except indicators
* Attempt to get things working
* hmm
* Compiles but doesn't run
* Make data transfer work
* Get all indicators working
* Remove old transport
* Prepare for pullreq
* Revert keymap from testing to production
* Final error checking for pull request
* Remove autogenerated is_command from config.h
* Rewrite pin toggles using qmk functions
* 412_64 move to handwired
412_64 and its second printing, Mark Zero Stand Aside, are now obsolesced by new hardware. As only two units exist in the wild not owned by me, I'm moving the definition to handwired.
* Mark 3 Stand Aside ready for production.
Uploading firmware, compiled and tested, for Mark 3 Stand Aside. The hardware's ready, now the software is too.
* Whoops.
Should've branched before pushing Stand Aside. Sorry 'bout that.
* Revert "Whoops."
This reverts commit d222046cfe6183ed0c42286ec9ebb5034a5d1009.
* Revert "Mark 3 Stand Aside ready for production."
This reverts commit c790899af7a6d92855aebe6a96003f1fe9be66b3.
* Update userspace with common config.h
* Add my dz60, satan and xd75 keyboard keymaps
* Fixing executable bits changed during last upstream merge
* Cleanup unnecessary files and defines
* Remove unnecessary defines from userspace config
* Add underglow controls to dz60 function layer
* Fixing merge conflicts
* Fixing exectable bits changed during merge
* Userspace update
* intial commit
* fix up some of the cookie cutter code
* define pins used and size of switch matrix
* enable lighting settings and bootmagic lite
* create the appropriate LAYOUT macro
* remove a comma for compilation errors
* provide a suitable keymap
* disable console and command due to firmware being too large
* add Caps Lock LED support
* Add QMK Configurator support
* fix markdown rendering
* fix mechmerlin to mechkeys
* use `register_code16` and relatives for tapdance code
* rename tapdance keys to more closely mirror the `KC` names in QMK
* additional naming change to match QMK style
* Gray Studio HB85 Initial Support
* Fixed README image
* Updated README
* Disabled Bootmagic and Console for HB85
* Fixed Numpad 4 matrix place
* Fixes board crashing with RGB enabled
* Moved HB85 files to gray_studio folder
* Uses old i2c library since this version makes RGB underglow work
* Improved default keymap with underglow control layer
* Removes obsolete program and uses generic script instead
As per zvecr feedback
* Uses GPIO Functions to initialise and set RGB underglow PINS
* Add keycode for KC_MAKE
* Add KC_MAKE keycode
* Add stanrc85.c file with KC_MAKE
* Remove unused include
* Improved KC_MAKE stolen from Drashna
* Define mod mask for new KC_MAKE code
* RESET board to flash after compiling
* Remove send_string
* RESET fixed in KC_MAKE
* add dusty keymap
* change keymap folder to match my github username
* initial keymap completed in comments only
* layout without NAV completed in comments only
* disable Command to prevent interference with Space Cadet keys
* switch _ and \ in the symbol layer
* Layers complete through _NAV
* add thumb keys to _NAV
* complete _NUM
* all layouts complete; still needs `process_user_record()`
* completed first draft of keymap; still needs config.h to match
* corrected keycodes for Mac macro-volume keys
* fix Mac mute keycode
* add missing Mac keycodes for previous and next track
* placeholder for qwerty layout, not yet completed;
remove unnecessary breaks;
add todos
* eliminate Preonic branch before switching to Minidox branch:
• delete dustypomerleau Preonic keymap folder
• complete keymap.c (QWERTY layer, vanilla numbers layer)
TODO:
• add preferences to config.h
• complete the README
* edit commented keymap diagrams for clarity in dual function keys
* define initial config.h and add rules.mk for mouse key support
* fix redundant line after implementation of tap_code()
* fixed key_timer declaration, added README and rules
* formatting of keymap
* add CTPC to config
* cycle thumb keys to favor center position
* modify config.h for temporary Pro Micro compatibility
* remove superfluous call to use serial; homebrewed mod tap keys are still broken with OSL
* merge _SYS and _MEDIA on new Z_SYS key
* ALT_OP example of new MT macro complete
* initial narze-inspired MT fixes in PRU
* add (currently superfluous) custom keycode for the _SYS layer
* rudimentary `OSL` symbol macros that immediately register the mod and fail to reset the oneshot layer, but do output the proper keys—fix both of these things
* remove permissive hold to improve tapping performance
* remove calls to `clear_oneshot_layer_state()`, as they have no effect inside `process_record_user()`. Tapdance appears to be the way forward.
* final commit before tapdance code; correct layout in comments
* initial tapdance code for shifted mod taps
* add numeric and ergo NUM layers and pinky shifts for keycuts
* add TD() wrappers to tapdance codes and clean up commented layout guides
* add faux return to cur_dance to allow compilation - TODO: research what the default clause should be in cur_dance
* update commented schematics for better readability
* add backspace and delete to lockable layers, Z_SYS -> SYS_Z for consistency, fix schematic errors
* add `DOUBLE_SINGLE_TAP` to tapdance cases to allow doubling of the single tap character without waiting tapping term
* remove reduced oneshot tapping toggles
* update README
* newline tweak :)
* Update keyboards/minidox/keymaps/dustypomerleau/keymap.c
Co-Authored-By: dustypomerleau <dustypomerleau@users.noreply.github.com>
* Update keyboards/minidox/keymaps/dustypomerleau/config.h
Co-Authored-By: dustypomerleau <dustypomerleau@users.noreply.github.com>
* Update keyboards/minidox/keymaps/dustypomerleau/config.h
Co-Authored-By: dustypomerleau <dustypomerleau@users.noreply.github.com>
* Update keyboards/minidox/keymaps/dustypomerleau/config.h
Co-Authored-By: dustypomerleau <dustypomerleau@users.noreply.github.com>
* Update keyboards/minidox/keymaps/dustypomerleau/config.h
Co-Authored-By: dustypomerleau <dustypomerleau@users.noreply.github.com>
* remove `PREVENT_STUCK_MODIFIERS`, as this is default behavior
* enable extrakey in rules to enable media keys
* enable extrakeys for media key compatibility on macOS
* add dash and slash to _NUM layers
* change to universal volume keycodes
* revert micro volume adjustments to macOS-specific codes due to lack of functionality (macro volume adjustments are still universal)
* fix image of _SYS layer in comments
* more diagram fixes in comments
* fix typo
* simplify tapdance code
* match _NUM_N to _NUM_E
* move slash to allow better use of comma in number layers
* match layer and keycode enums to the docs
* correct qwerty numlock to match numeric numlock layer
* Change how desktop commands work
* Add DST_MOD_MASK as a config option
* DST_RMV → DST_REM
* Add melody96:konstantin keymap
* Update custom SEND_STRING
* Move feature flags from userspace into keyboard rules
* Use "Vo-", "Vo+" instead of "VoD", "VoU" in keymap comments
* Add RGB controls and numpad Unicode to Melody96 keymap
* Add RGB_SET keycode to Melody96 and RGB files to userspace
* Generate UNICODE and UNICODEMAP constants using macros
* Avoid collisions with X_* send string constants
* Use two spaces before inline comments
* Add _keymap versions of other custom Quantum functions
Not added: eeconfig_update_keymap, eeconfig_read_keymap
* Switch to UNICODEMAP in keyboard rules
* Make toggle_numpad a nested function in process_record_user
* Set Melody96 underglow color to Godspeed blue on EEPROM reset
* Remove most _keymap and _user definitions in userspace
Some keyboards misuse _user functions by defining them in the base files
instead of the corresponding _kb functions (especially led_set_user and
matrix_init_user). Until this is fixed (#5148), I've removed definitions
in my userspace that could cause linking collisions.
* Update GODSPEED_BLUE values and RGB mode keys
* Add GODSPEED_YELLOW color
* Set preferred intervals for rgblight effects
* Update tap dance function names
* Replace td_lshift_fn with generic td_mod_layer, add TD_RCTL_FN
Move TD_FN_RCTL after TD_RCTL_FN
* Replace td_fn_rctrl with generic td_layer_mod
* Add blank lines, prefer explicit initialization
* ACTION_TAP_DANCE_DOUBLE_MODS → ACTION_TAP_DANCE_DOUBLE_MOD
* Update Godspeed colors
* Add media controls to Melody96 keymap
* Add SysRq, Break combos and other keys to Melody96 keymap
* Add HOME/END keys as upper/lower on arrow-up/down
* Reduce .hex file size by turning off unneeded options
* Put digit keypad onto left hand upon RAISE; this will sometimes be preferable to double-hits of right hand
* Latest super latest version merge
* cbbrowne keymap for XD75re
* starting notes on XD75re keymap plans
* First draft of bottom row of QWERTY
* Switch my special bottom line over to QCENT
* Dunno
* Filling in wanted keys, bit by bit...
* Add copyright, extra macro
* Clean up comments, remove some experimental code I didn't like
* TODO plans for xd75re
* clean up keyboard layout
* QCENT2 is my new experiment for the main keyboard...
* Add a few more main layer keys, and modify LOWER to shift things outwards to conform with main layer
* Clean up RAISE layer to conform with main layer, remove QCENT layer as QCENT2 is the new thing
* More xd75 changes, now that I actually have it in hand
* shift keymap around, as original attempt was a bit too aggressive in keeping to the edges
* more revs to XD75
* Dropping parts of the centre keypad in favor of Keys I Really Need
* Improve documentation to conform with how builds are done now
* Improve documentation to conform with how builds are done now
* Add cbbrowne rules file as alternative to having the rules in Makefile
* Makefile not needed anymore for individual keymap
* Some revs to my keymapping
* Add {}
* Add PGUP/PGDN
* Shifted some middle-range keys around
* Needed Tilde, Backquote, and to shift RESET onto FUNCTION layer
* Wanted ~
* cbbrowne hasn't anything to do with hadron keymaps
* trim unneeded bits
* I prefer OrgMode for my notes
* Have a right-alt
* Layer keys make LED colors change
* Add sample user rules for cbbrowne
* Add source of xd75 rules
* Individualized xd75 rules
* Adopt LAYOUT to genericize the layout as an ortholinear 5x15 keyboard
* Tidy up 5x6.h
- replaced tabs with spaces (QMK convention)
- aligned layout macro visually
* Fix Configurator support for Dactyl Manuform 5x6
- layout macro had the wrong name in info.json
* Tidy up 5x7.h
- replaced tabs with spaces (QMK convention)
- aligned layout macro visually
* Fix Configurator support for Dactyl Manuform 5x7
- corrected keyboard height
- layout macro had the wrong name in info.json
* Tidy up 6x6.h
- replaced tabs with spaces (QMK convention)
- aligned layout macro visually
* Fix Configurator support for Dactyl Manuform 6x6
- layout macro had the wrong name in info.json
* Separate keymaps to VIA enabled/dissabled.
- Default rules.mk has been changed to disable via.
- VIA keymaps have been added for default keymaps.
* Update naming
* Initial refactor of handwired bluetooth mod to keymap
* Initial refactor of handwired bluetooth mod to keymap - strip out unnecessary duplicate config, update readme
* Initial refactor of handwired bluetooth mod to keymap - reduce firmware size
* Initial refactor of handwired bluetooth mod to keymap - update readme image
* add dusty keymap
* change keymap folder to match my github username
* initial keymap completed in comments only
* layout without NAV completed in comments only
* disable Command to prevent interference with Space Cadet keys
* switch _ and \ in the symbol layer
* Layers complete through _NAV
* add thumb keys to _NAV
* complete _NUM
* all layouts complete; still needs `process_user_record()`
* completed first draft of keymap; still needs config.h to match
* corrected keycodes for Mac macro-volume keys
* fix Mac mute keycode
* add missing Mac keycodes for previous and next track
* placeholder for qwerty layout, not yet completed;
remove unnecessary breaks;
add todos
* eliminate Preonic branch before switching to Minidox branch:
• delete dustypomerleau Preonic keymap folder
• complete keymap.c (QWERTY layer, vanilla numbers layer)
TODO:
• add preferences to config.h
• complete the README
* edit commented keymap diagrams for clarity in dual function keys
* define initial config.h and add rules.mk for mouse key support
* fix redundant line after implementation of tap_code()
* fixed key_timer declaration, added README and rules
* formatting of keymap
* add CTPC to config
* cycle thumb keys to favor center position
* modify config.h for temporary Pro Micro compatibility
* remove superfluous call to use serial; homebrewed mod tap keys are still broken with OSL
* merge _SYS and _MEDIA on new Z_SYS key
* ALT_OP example of new MT macro complete
* initial narze-inspired MT fixes in PRU
* add (currently superfluous) custom keycode for the _SYS layer
* rudimentary `OSL` symbol macros that immediately register the mod and fail to reset the oneshot layer, but do output the proper keys—fix both of these things
* remove permissive hold to improve tapping performance
* remove calls to `clear_oneshot_layer_state()`, as they have no effect inside `process_record_user()`. Tapdance appears to be the way forward.
* final commit before tapdance code; correct layout in comments
* initial tapdance code for shifted mod taps
* add numeric and ergo NUM layers and pinky shifts for keycuts
* add TD() wrappers to tapdance codes and clean up commented layout guides
* add faux return to cur_dance to allow compilation - TODO: research what the default clause should be in cur_dance
* update commented schematics for better readability
* add backspace and delete to lockable layers, Z_SYS -> SYS_Z for consistency, fix schematic errors
* add `DOUBLE_SINGLE_TAP` to tapdance cases to allow doubling of the single tap character without waiting tapping term
* remove reduced oneshot tapping toggles
* update README
* newline tweak :)
* Update keyboards/minidox/keymaps/dustypomerleau/keymap.c
Co-Authored-By: dustypomerleau <dustypomerleau@users.noreply.github.com>
* Update keyboards/minidox/keymaps/dustypomerleau/config.h
Co-Authored-By: dustypomerleau <dustypomerleau@users.noreply.github.com>
* Update keyboards/minidox/keymaps/dustypomerleau/config.h
Co-Authored-By: dustypomerleau <dustypomerleau@users.noreply.github.com>
* Update keyboards/minidox/keymaps/dustypomerleau/config.h
Co-Authored-By: dustypomerleau <dustypomerleau@users.noreply.github.com>
* Update keyboards/minidox/keymaps/dustypomerleau/config.h
Co-Authored-By: dustypomerleau <dustypomerleau@users.noreply.github.com>
* remove `PREVENT_STUCK_MODIFIERS`, as this is default behavior
* enable extrakey in rules to enable media keys
* enable extrakeys for media key compatibility on macOS
* add dash and slash to _NUM layers
* change to universal volume keycodes
* revert micro volume adjustments to macOS-specific codes due to lack of functionality (macro volume adjustments are still universal)
* keymap + alpha
* some fixes
* keymap + alpha
* some fixes
* drashna changes
* linked main Alpha repo in keyboards/alpha readme
* missed a spot
* there's another function called FUNC lol
* keymap + alpha
* some fixes
* keymap + alpha
* drashna changes
* Fixed include
* Revert "Fixed include"
This reverts commit ea92f261f86d8433eab313cde498adca1682a006.
* messed up my git, fixed include
* starting work on TMO50 layout
* Update keyboards/tmo50/keymaps/default/keymap.c
Co-Authored-By: PyrooL <lm11887@gmail.com>
* Removed since options are in userspace
* Removed RGB option that was breaking one of my builds
* Remove unused options
* Removed options present in userspace, add board specific options here
* Removed code also present in userspace
* Turns out those lines were needed, added them back
* Testing changes
* Added code to ensure board read as ANSI instead of default ISO for HS60
* Setting \ key to "MOD" instead of "ALPHA" for lighting
* Added personal keymaps for Planck, Preonic, Vitamins Included by Juno
* Removing redundancies as suggested
* More removals that were missed out in the previous commits
* Updated Preonic to use new layout
* More redundancies missed out
* Updated more optimal code for FN layer LED indicator.
* Further codes clean up.
* Added a dual windows/osx layout
Default layer is normal ISO for windows. Second layout is Windows ISO layout but for OSX, but with the keys corrected so you will get the correct shifted and alt'd keys on OSX (keyboard keys match OSX keys without having to change your keyboard type in system preferences). Layer three is configuration and other functions, and layer four is where the shifting magic happens. Also tab and caps lock have been swapped around.
* made sure bootmagic is in a seperate rules.mk
made sure bootmagic is in a seperate rules.mk
* commiting the keymap rules.mk
commiting the keymap rules.mk
