* add support for hid gamepad interface
add documentation for HID joystick
Add joystick_task to read analog axes values even when no key is pressed or release. update doc
Update docs/feature_joystick.md
Manage pin setup and read to maintain matrix scan after analog read
* Incorporates patches and changes to HID reporting
There are some patches provided by @a-chol incorporated on this commit,
and also some changes I made to the HID Report structure.
The most interesting is the one dealing with number of buttons: Linux
doesn't seem to care, but Windows requires the HID structure to be byte
aligned (that's in the spec). So if one declares 8/16/32... buttons they
should not have any issues, but this is what happens when you have 9
buttons:
```
bits |0|1|2|3|4|5|6|7|
|*|*|*|*|*|*|*|*| axis 0 (report size 8)
|*|*|*|*|*|*|*|*| ...
|*|*|*|*|*|*|*|*|
|*|*|*|*|*|*|*|*|
|*|*|*|*|*|*|*|*|
|*|*|*|*|*|*|*|*|
|*|*|*|*|*|*|*|*| axis 6
|*|*|*|*|*|*|*|*| first 8 buttons (report size 1)
|*| | | | | | | | last of 9 buttons, not aligned
```
So for that I added a conditonal that will add a number of reports with
size 1 to make sure it aligns to the next multiple of 8. Those reports
send dummy inputs that don't do anything aside from aligning the data.
Tested on Linux, Windows 10 and Street Fighter (where the joystick is
recognized as direct-input)
* Add save and restore of each pin used in reading joystick (AVR).
Allow output pin to be JS_VIRTUAL_AXIS if the axis is connected to Vcc
instead of an output pin from the MCU.
Fix joystick report id
Fix broken v-usb hid joystick interface. Make it more resilient to unusual settings (none multiple of eight button count, 0 buttons or 0 axes)
Correct adc reading for multiple axes. Piecewise range conversion for uncentered raw value range. Input, output and ground pin configuration per axis.
Documentation fixes
* Fix port addressing for joystick analog read
* The other required set of changes
As per the PR, the changes still holding it up.
Add onekey for testing.
Fix ARM builds.
Fix device descriptor when either axes or buttons is zero.
Add compile-time check for at least one axis or button.
Move definition to try to fix conflict.
PR review comments.
qmk cformat
* avoid float functions to compute range mapping for axis adc reading
* Remove V-USB support for now. Updated docs accordingly.
* Update tmk_core/protocol/lufa/lufa.c
Co-Authored-By: Ryan <fauxpark@gmail.com>
* Update tmk_core/protocol/usb_descriptor.c
Co-Authored-By: Ryan <fauxpark@gmail.com>
* Update tmk_core/protocol/usb_descriptor.c
Co-Authored-By: Ryan <fauxpark@gmail.com>
* Update tmk_core/protocol/usb_descriptor.c
Co-Authored-By: Ryan <fauxpark@gmail.com>
* Add support for joystick adc reading for stm32 MCUs. Fix joystick hid report sending for chibios
* Fix HID joystick report sending for ChibiOS.
Add one analog axis to the onekey:joystick keymap.
Fix pin state save and restore during joystick analog read for STM32
MCUs.
* Update tmk_core/protocol/chibios/usb_main.c
Co-Authored-By: Ryan <fauxpark@gmail.com>
* Update tmk_core/protocol/lufa/lufa.c
Co-Authored-By: Ryan <fauxpark@gmail.com>
* Add missing mcuconf.h and halconf.h to onekey:joystick keymap.
Add suggested fixes from PR.
* Switch saveState and restoreState signature to use pin_t type.
onekey:joystick : add a second axis, virtual and programmatically animated.
* Update docs/feature_joystick.md
Co-Authored-By: Ryan <fauxpark@gmail.com>
* Update docs/feature_joystick.md
Co-Authored-By: Ryan <fauxpark@gmail.com>
* Add PR corrections
* Remove halconf.h and mcuconf.h from onekey keymaps
* Change ADC_PIN to A0
Co-authored-by: achol <allecooll@hotmail.com>
Co-authored-by: José Júnior <jose.junior@gmail.com>
Co-authored-by: a-chol <achol@notamail.com>
Co-authored-by: Nick Brassel <nick@tzarc.org>
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update Space Cadet to use Custom Tapping Term functionality
* Detect correct keycode for space cadet tapping term
* Update tap dancing to use global custom tapping term
* Update documentation for Tap Dances
* formatting pass
* Apply suggestions from code review
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Update docs/feature_tap_dance.md
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update for future
* Update user keymaps for space cadet
* Fix typos
* Clean up tapping term stuff
* Fix compiler issue if NO_ACTION_TAPPING is enabled
Co-authored-by: fauxpark <fauxpark@gmail.com>
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Initial work for consolidation of board files and default ChibiOS configs.
* Migrate F401/F411 black pills for testing.
* Add early init bootloader jump flag.
* Add support for I2C in order to use i2c_scanner keymap.
* Add F401/F411 HSE bypass to get things booting.
* Exempt "hooked" ChibiOS conf files from updater script.
* Fix up ordering for bootloader_defs file check.
* Match previous $(KEYBOARD_PATHS) value for Proton-C, updated for all board configs.
* Add a compiling layout based on minidox
* Add the correct pins
* Add old for science code
* Update to 2020 standards
* Get the keymap working
* update config
* Update pinout
* Fix pins
* Make requested changes
* Add info.json for configurator
* for science - PR comments
* Apply suggestions from code review
* setup handwired pteron38
* Clean up readme
* readme follow template
* c formatting conventions
* remove file size comments from rules.mk
* use direct link to imgur image
* Apply suggestions from code review
* add license
* kbd67/mkiirgb - allow disabling rgb matrix
wrap rgb matrix funs in defines
* kbd67mkiirgb - changes per review
remove kb funcs that just call the user version. what's left is all rgb
matrix stuff so we can just wrap the whole file.
* Initial prep for PR
* Fixing jsons for revs
* Remove old keymap ref in readme
* Add Rev1 default layout
* Fix extra comma in default r1 keymap
* Changed default keymap for r1 to match new split bottom row macro name, updated via keymap readme, updated r1 json to match layout macro name, updated split space macro for r1
* Moved combo configs to default keymaps, removed unused bootloader selections
* Update keyboards/underscore33/rev1/rules.mk
* Update keyboards/underscore33/rev2/rules.mk
* Refactor _33 folder structure
* Add VIA keymap to rev1
* Rename macros and product_id as suggested
* add support for ModelM USB board
* EMI improvement: remove unnecessary toggling of MOSI pin
* address review comments
* Update keyboards/mschwingen/modelm/rules.mk
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/mschwingen/modelm/rules.mk
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/mschwingen/modelm/config.h
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/mschwingen/modelm/config.h
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/mschwingen/modelm/rules.mk
Co-authored-by: Drashna Jaelre <drashna@live.com>
* Update keyboards/mschwingen/modelm/keymaps/default/keymap.c
Co-authored-by: Drashna Jaelre <drashna@live.com>
* update printf usage
* add comment
* EMI improvement: remove unnecessary toggling of MOSI signal
* remove trailing space
* use shorter macros as suggested in review by noroadsleft, re-format table to line up columns
* Update keyboards/mschwingen/modelm/config.h
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/mschwingen/modelm/rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/mschwingen/modelm/rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/mschwingen/modelm/rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/mschwingen/modelm/README.md
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/mschwingen/modelm/README.md
Co-authored-by: Ryan <fauxpark@gmail.com>
* Apply suggestions from code review
use spi_read from core insteads of our own copy
Co-authored-by: Ryan <fauxpark@gmail.com>
* include spi_master.c to use spi_read()
* Update keyboards/mschwingen/modelm/README.md
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Apply suggestions from code review: correct indenting in keymap
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Apply suggestions from code review
use automatic variant defines from makefile instead of defining our own
Co-authored-by: Drashna Jaelre <drashna@live.com>
* Update keyboards/mschwingen/modelm/rules.mk: use QUANTUM_LIB_SRC for uart.c
Co-authored-by: Drashna Jaelre <drashna@live.com>
Co-authored-by: Michael Schwingen <michael@schwingen.org>
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
Co-authored-by: Drashna Jaelre <drashna@live.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* added matrix 8xv2.0 additional keyboard
* Apply suggestions from code review
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* add copyright and speed up the matrix scanning
* Update keyboards/matrix/m20add/rules.mk
Co-authored-by: Drashna Jaelre <drashna@live.com>
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
Co-authored-by: Drashna Jaelre <drashna@live.com>
* added nemui layout
* via support working
* added license headers for c and h files
* Update keyboards/nemui/keymaps/via/rules.mk
* Update keyboards/nemui/nemui.c
* Update keyboards/nemui/config.h
* Update keyboards/nemui/readme.md
* Update keyboards/nemui/rules.mk
* removed nemui.json as it was supposed to only be in via repo
* Update keyboards/nemui/keymaps/default/keymap.c
* Update keyboards/nemui/info.json
* Update keyboards/nemui/info.json
* Update keyboards/nemui/keymaps/via/keymap.c
* Update keyboards/nemui/keymaps/via/keymap.c
* first iteration of my keymap
* * move to userspace
* "script" modes
* keymap bling
* OM and RUPA keys
and tryin to micro-optimize in process_records.c
* woops
swap shifted rupas
forgot to add codepoint for OM
* Apply suggestions from code review
Co-authored-by: Drashna Jaelre <drashna@live.com>
* add call to process_record_keymap, per review
* fall through to process_record_keymap
* license headers
Co-authored-by: Drashna Jaelre <drashna@live.com>
* add in drewguy's code with a few additions to the keymap
* add VID and PID
* fixup defualt keymap
* add VIA keymap
* thanks to bigchimpo for reminding me to put an Fn key in the default keymap
* make sure we have the right gitugithub url for drew
* remove description as per PR checklist
* append readme with more information
* Update keyboards/holyswitch/southpaw75/config.h
* Update keyboards/holyswitch/southpaw75/info.json
* Update keyboards/holyswitch/southpaw75/southpaw75.h
* Update keyboards/holyswitch/southpaw75/info.json
* [kbdfans] Added dbroqua layout for kbd6x
Add dbroqua keymap for kbd6x
Add dbroqua layout for kbd6x with HHKB style and RGB.
* Update keymap.c
* Change based on zvecr
* Added RESET button
* Add support for keyboard 'Bolt'
Add support for keyboard 'Bolt'
* Update info.json
* Update info.json
* Update keyboards/lazydesigners/bolt/config.h
Co-authored-by: Joel Challis <git@zvecr.com>
* Update keyboards/lazydesigners/bolt/rules.mk
Co-authored-by: Joel Challis <git@zvecr.com>
* Update keyboards/lazydesigners/bolt/readme.md
Co-authored-by: Joel Challis <git@zvecr.com>
* Update info.json
* Update keyboards/lazydesigners/bolt/info.json
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/lazydesigners/bolt/bolt.h
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/lazydesigners/bolt/info.json
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/lazydesigners/bolt/keymaps/default/keymap.c
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/lazydesigners/bolt/info.json
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/lazydesigners/bolt/keymaps/default/keymap.c
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/lazydesigners/bolt/keymaps/default/keymap.c
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
Co-authored-by: Joel Challis <git@zvecr.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* via keymap for boardsource/3x4
* fix formatting
* Apply suggestions from code review
fix rules.mk
* Update keyboards/boardsource/3x4/rules.mk
* use unique product ID
* update vendor id to be unique, update product id to make more sense
* First commit
* Added ChibiOS files
* renamed files to remove capital letters
* Fixed layout references
* fixed image reference
* Fixing errors
* Fixed config.h
* changed second up to fn key
* renamed files and added beginning of via compatibility
* renamed keyboard
* removed vscode files
* fixing files for via compatibility
* adding via files
* working via compatibility
* Update readme.md
* Update readme.md
* First commit
* Added ChibiOS files
* renamed files to remove capital letters
* Fixed layout references
* fixed image reference
* Fixing errors
* Fixed config.h
* changed second up to fn key
* renamed files and added beginning of via compatibility
* renamed keyboard
* removed vscode files
* fixing files for via compatibility
* adding via files
* working via compatibility
* added license header to via file
* preparing for pull request
* Fixed firmware according to pull request feedback
* fixed readme according to pull request feedback
* Updated readme and removed unnecessary layers in default/keymap.c
* removed whitespace
* updated keymap readme to match suggestion
* Initial commit for HHKB Lite 2
* Rearrange keymap
* Clean up config
* Fix pin assignments
* Code and filename cleanup
* Add README
* Apply suggestions from code review
Code cleanup
* Update keyboards/hhkb_lite_2/README.md
Documentation cleanup
* Change Vendor ID to unused
* One more LAYOUT
* Via keymap for HHKB Lite 2
* Remove redundant keymap.c
* Add README for Via keymap
* Fix vendorId for Via keymap
* Apply suggestions from code review
Cleanup based on review feedback
* Clean up via keymap makefile rules
* Switch to C keymap instead of JSON for Via layout
* Move bootmagic key config to main
Moved to main keyboard config to be shared by all keymaps.
* Address PR feedback
* Reformat config comments
* Format rules.mk comments
* Rename README -> readme
* Use `make` instead of `qmk` in examples
* Updating keymaps for Gingham and DMQ Design SPIN and adding keymap for BoardSource 4x12
* Update keyboards/boardsource/4x12/keymaps/codecoffeecode/keymap.c
* cleaning up
* got some working bones
* working pretty well
* really livin' now
* all done
* copyright adjustments
* default keymap
* readme
* no descrip
* remove trailing slashes
* remove blank line
* remove trailing slashes
* clean up readme
* clean up rules spacing
* bootloader spacing
* made quick json from KLE converter
* remove postageboard mini references
* add actual manu and product values
* add make example
* rework
* remove double bootload define
* smoller image
* liscensed
* correct dimensions
* dimensions
Specifically, don't want to have both RGBLight and RGB Matrix (with WS2812) enabled at the same time. This will cause issues in usage, but apparently not when compiling. Additionally, the led matrix was not encapsulated with preprocessor code.
* ext65rev2 initial
* open drain change and config
* pwm
* pwm streams
* spi
* ws2812 spi
* oled
* enable sleep
* keymap and dissable oled
* readd oleds
* nooled
* led_update_kb revised
* update and remove board specific files and add to ext65rev2.c
* Update OLED usb status
* Update keyboards led state
* Layer state set kb
* Return state
* Update keyboards led state
* Update OLED usb status
* merge master and merge rev folders
* add readme
* move board_init to only if OLED is enabled
* update readme
* update rules.mk
* Remove OLED from rules.mk
* Update config.h
* show AEBoards
* Update keyboards/aeboards/ext65/rev2/rules.mk
* added dumbo keyboard
* added my personal keymap
* changed picture in readme
* removed rev1 folder to reduce clutter and confusion
* missed a few changes in last commit, everything should be added now
* Apply suggestions from code review
Committed all of the suggested changes except for removing the bootloader reference comments in rules.mk as i think it is handy.
* Update keyboards/dumbo/rules.mk
Removed the bootloader reference as suggested
* Apply clean up of info.json
* Apply suggestions from noroadsleft to support community layout LAYOUT_SPLIT_3x6_4 in the future_4
* Added handwired/selene based on handwired/106_with_trackpoint
* now at least parially working
* Selene Firmware 1, ready
* Updated Readme to align more with Template
* Added URL to info.json
* Fix status Lights being wired incorrectly
* Update keyboards/handwired/selene/config.h
* Update keyboards/handwired/selene/keymaps/Bpendragon/keymap.c
* Update keyboards/handwired/selene/selene.c
* Update keyboards/handwired/selene/selene.h
* Changes for PR requested by fauxpark
* Adds `default` keymap
* Renames `Bpendragon` to `bpendragon`
* Removes uneeded descriptors and options
* Simplifies return statement in `keymap.c`
* Removes trailing slashes from layout in `keymap.c`
* Updates `readme.mk` to reflect default keymap
* Aligns comments in `rules.mk`
* Forced folder name update to lowercase
* Apply suggestions from code review
* On branch add_chavdai40_keyboard
Changes to be committed:
new file: keyboards/chavdai40/boards/GENERIC_STM32_F042X6/board.c
new file: keyboards/chavdai40/boards/GENERIC_STM32_F042X6/board.h
new file: keyboards/chavdai40/boards/GENERIC_STM32_F042X6/board.mk
new file: keyboards/chavdai40/bootloader_defs.h
new file: keyboards/chavdai40/chavdai40.c
new file: keyboards/chavdai40/chavdai40.h
new file: keyboards/chavdai40/chconf.h
new file: keyboards/chavdai40/config.h
new file: keyboards/chavdai40/halconf.h
new file: keyboards/chavdai40/info.json
new file: keyboards/chavdai40/keymaps/42keys-dvorak/config.h
new file: keyboards/chavdai40/keymaps/42keys-dvorak/keymap.c
new file: keyboards/chavdai40/keymaps/42keys-eucalyn/config.h
new file: keyboards/chavdai40/keymaps/42keys-eucalyn/keymap.c
new file: keyboards/chavdai40/keymaps/42keys-qwerty/config.h
new file: keyboards/chavdai40/keymaps/42keys-qwerty/keymap.c
new file: keyboards/chavdai40/keymaps/44keys-dvorak/config.h
new file: keyboards/chavdai40/keymaps/44keys-dvorak/keymap.c
new file: keyboards/chavdai40/keymaps/44keys-eucalyn/config.h
new file: keyboards/chavdai40/keymaps/44keys-eucalyn/keymap.c
new file: keyboards/chavdai40/keymaps/44keys-qwerty/config.h
new file: keyboards/chavdai40/keymaps/44keys-qwerty/keymap.c
new file: keyboards/chavdai40/keymaps/default/config.h
new file: keyboards/chavdai40/keymaps/default/keymap.c
new file: keyboards/chavdai40/mcuconf.h
new file: keyboards/chavdai40/readme.md
new file: keyboards/chavdai40/rules.mk
* commit suggestions of zvecr and fauxpark, thanks
* commit suggestions of fauxpark, thanks
* commit suggestions of fauxpark, thanks
* commit suggestions of drashna, thanks
Co-authored-by: Joel Challis <git@zvecr.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Create Alter folder
* Revert "Create Alter folder"
This reverts commit 361103b821dbb22957b66cdedb0d11f996def71c.
* Added a via keymap folder
* Edited files based on requested changes
* Modify VENDOR_ID of kudox-keyboard series.
* Add via support for kudox/rev3.
* Add via support for kudox/columner.
* Add via support for kudox-game keyboard.
* Remove info.json from kudox/rev1.
* Revert kudox/rev1/info.json.
* Remove redundancy spaces.
* Add key_count on kudox/**/info.json.
* Remove unsupported items from info.json.
* Modify to use rgblight_mode from rgblight_mode_noeeprom
* Remove unneed line from info.json
* Revert keyboards/kudox/rev1/info.json
* Add split_3x5_3 support to Minidox
* Add split_3x5_3 support to Miniaxe
* Add LAYOUT_mini to Centromere
This layout macro removes the need or KC_NO keycodes in the keymap.
* Add split_3x5_3 support to Centromere
* Add split_3x5_3 support to suihankey split
* Add LAYOUT_mini to centromere/info.json
* Add LAYOUT_mini to crkbd
* Add split_3x5_3 support to crkbd
* Change mini layout names
* Rename main layouts for split_3x6_3 keyboards
* Use split_3x5_3 macro for remaining keyboards
* Update relevant info.json files
* Fix suihankey/split/alpha macro
* Add layout aliases for suihankey
* Create Alter folder
* Revert "Create Alter folder"
This reverts commit 361103b821dbb22957b66cdedb0d11f996def71c.
* Add via keymap folder for n2 keyboard
* KBDfans DZ60 ANSI with Arrow also RGB Underglow as a Caps Lock Indicator
* Change all the KC_NOs to _______ (seven underscores)
* change all the KC_NOs to _______ (seven underscores)
* Update keymap.c
* Update readme.md
Update build environment setup link, make instructions link, and make instructions link.
* fix Configurator data
* rework layout macros
* enable 65_ansi_blocker Community Layout support
* fix layout macro references in info.json
* update rules.mk per fauxpark
* update rules.mk per fauxpark II
Co-authored-by: ridingqwerty <george.g.koenig@gmail.com>
Co-authored-by: Drashna Jaelre <drashna@live.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Added a new handwired 2x3,2x4,2x5 keyboard called the Stream_cheap
stream cheap is a diy version of the El Gato Stream deck minus the LCD keys
but you can always get relegendable keycaps to change the icon if you want
* added missing commas in info.json files
* update config to change pin definition
* changed keymap.c for 2x4
was trying to add macros and multi key commands to the keymap,
i added 2 ctrl commands that have more than one key i.e. ctrl-k-c (visual studio comment hot key)
and i added a test string to see how type out a string with the press of a button
* testing more changes to the keymap to the 2x5
* Update keyboards/handwired/stream_cheap/2x3/2x3.c
* Update keyboards/handwired/stream_cheap/2x3/config.h
* Update keyboards/handwired/stream_cheap/2x3/rules.mk
* Update keyboards/handwired/stream_cheap/2x5/config.h
* Update keyboards/handwired/stream_cheap/2x5/info.json
* Update keyboards/handwired/stream_cheap/2x3/config.h
* Update keyboards/handwired/stream_cheap/2x3/info.json
* Update keyboards/handwired/stream_cheap/2x4/config.h
* Update keyboards/handwired/stream_cheap/2x4/info.json
* Update keyboards/handwired/stream_cheap/2x4/keymaps/default/keymap.c
* Update keyboards/handwired/stream_cheap/2x5/info.json
* Update keyboards/handwired/stream_cheap/2x5/config.h
* Update keyboards/handwired/stream_cheap/2x5/rules.mk
* Update keyboards/handwired/stream_cheap/2x4/2x4.c
* Update keyboards/handwired/stream_cheap/2x4/config.h
* Update keyboards/handwired/stream_cheap/2x4/info.json
* Update keyboards/handwired/stream_cheap/2x5/2x5.c
* Update keyboards/handwired/stream_cheap/2x4/rules.mk
* removed file as per request of user zvecr
* removed line in rules.mk for 2x5
* Update keyboards/handwired/stream_cheap/2x5/keymaps/default/keymap.c
* Apply suggestions from code review
changes suggested in code review
* Initial qaz commit
* Enable combos
* Improved default keymaps
* Fixed configurator json
* Via initial
* Corrected VIA json
* touch
* Via fixes
* Fixed via matrix
* Formatting
* Add lighting to qaz
* Add rgb animations, add rgb to l2, fix error in via json, enable rgblight by default
* Update QAZ readme
* Remove VIA json, prep for PR
* Correct default bootloader for pro-micro
* Remove accidentally added submodules
* Change names of layout macros
* Move combo defs to keymap folders, fix layout names in info.json
* Fixes transposition of comma and dot keys on default keymaps
* Update keyboards/qaz/keymaps/default/config.h
Co-authored-by: Joel Challis <git@zvecr.com>
* Update keyboards/qaz/keymaps/default_big_space/config.h
Co-authored-by: Joel Challis <git@zvecr.com>
* Update keyboards/qaz/rules.mk
Co-authored-by: Joel Challis <git@zvecr.com>
* Update keyboards/qaz/readme.md
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/qaz/rules.mk
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
Co-authored-by: Joel Challis <git@zvecr.com>
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* branch keyboards/kinesis/kint2pp from keyboards/kinesis/stapelberg
Changes will be made in the next commit
* [Keyboard] update wiring for kinT (kint2pp variant)
* add QMK plumbing
* Apply zvecr’s suggestions from code review
* Update keyboards/kinesis/kint2pp/config.h
* Update keyboards/kinesis/kint2pp/config.h
* remove superfluous config.h include
* Add Instant65 to QMK
* Fix via map
* Apply suggestions from code review
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* Added via support for 7sKB
-Changing the VID
-Add a keymap via
* Update keyboards/7skb/keymaps/via/keymap.c
Co-authored-by: Joel Challis <git@zvecr.com>
* Update keyboards/7skb/rev1/config.h
Co-authored-by: Ryan <fauxpark@gmail.com>
* Change of VID
I got a new VID and I'm changing the VID.
Co-authored-by: Joel Challis <git@zvecr.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* updated iris and kyria keymaps
* added symbols I forgot to add to keymap
* Update keyboards/keebio/iris/keymaps/jhelvy/keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* condense code
Co-authored-by: Ryan <fauxpark@gmail.com>
* condense code
Co-authored-by: Ryan <fauxpark@gmail.com>
* made another small fix to a missing symbol in my iris keymap
Co-authored-by: Ryan <fauxpark@gmail.com>
* [Keyboard] Initial Keybage/RadPad firmware
* [Keyboard] RadPad apply pull request feedback
- Change `LAYOUT_***_Encoders` to `LAYOUT_***_encoders` in <keyboard>.h
- Remove bootloader comments and unnecessary build options from rules.mk
- Use `LTO_ENABLE`
- Remove empty config.h from default keymap
- Remove trailing ` \` from keymap
* [Keyboard] RadPad fix info.json
- Change `LAYOUT_***_Encoders` to `LAYOUT_***_encoders` in info.json
* [Keyboard] Add host LED status to OLED display
* [Keyboard] Use LAYOUT_4x4_encoders, not LAYOUT
* [Keyboard] Use LAYOUT_4x4_encoders, not LAYOUT
* [Keyboard] Remove DESCRIPTION from config.h
* rewrite keyboards/massdrop/ctrl/keymaps/responsive_pattern/keymap.c in respopnse to the last update (#5328)
* remove print.h
* changed default parameters, modified readme
* I2C_TIMEOUT is not defined on arm teensy
* Work round teensy having different ChibiOS config options
* Stash OLED conf files
* update comment
* update comment
* Remove stm32 alias to allow teensy alt mode
* adding via support for Dactyl Manuform 5x7
* Changing Vendor ID from FEED to 444D (DM)
* Update keyboards/handwired/dactyl_manuform/4x6/config.h
Fixing typo in Dactyl Manuform 4x6 Product Id
Co-authored-by: Joel Challis <git@zvecr.com>
* Update keyboards/handwired/dactyl_manuform/4x5/config.h
Fixing typo in Dactyl Manuform 4x5 Product Id
Co-authored-by: Joel Challis <git@zvecr.com>
Co-authored-by: Roland Bernau <roland@bernau.dev>
Co-authored-by: Joel Challis <git@zvecr.com>
* new keyboard for squiggle.
* added pic and other layout.
* updated readme.
* following drashna's suggestions.
* removed an empty line and right hand as master.
* following fauxpark's suggestions.
* following manna-harbour's suggestions.
* trying to satisfy PR Lint keyboards
* manna-harbour forgot to add it.
* following fauxparx's suggestions.
* following fauxpark's suggestions.
* following fauxpark's suggestions.'
'
* following fauxpark's suggestions.
* following fauxpark''s suggestions.
* upated info.json to represent the actual layouts.
* following noroadsleft's suggestions.
* Add new keyboard, the N87
* Deleted config.h and readme.md on tsangan keymap folder
* Edited layout names on keymap.c and n87.h. Disabled audio
* Edited files based on requested changes, re-enabled audio on extra data pin B7, enabled audio click, disabled music mode
* Updated the wiring matrix for symmetric_standard layout
* start of punk75 keyboard
* preliminary code for the punk75 keyboard
* readme
* changes to work with USBasp
* changed cols and added configurable led
* set LED's pin as output
* changed led to new port and added rotary encoders
* added code for rotary encoders
* fixed col pins
* fixed encoder orientation
* added delay for tap_code so encoder works as intended
* added preliminary keymap for mine
* personal keymap for punk75
* personal keymap for punk75
* Apply suggestions from code review
Co-authored-by: Joel Challis <git@zvecr.com>
* Apply suggestions from code review
Co-authored-by: Ryan <fauxpark@gmail.com>
* fixed image
* Apply suggestions from code review
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Joel Challis <git@zvecr.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* Write firmware for the Ferris keyboard
Took inspiration from the gergoplex and the ergodox_ez firmware for the
split matrix with io_expander on the right hand.
Cleaned up a lot of bit fiddling on the mcu side by taking inspiration
from the `split_custom` in quantum.
Still bit fiddling on the mcp side as it is particularly natural to do
so with the abstractions provided by the i2c protocol. Would be good to
clean that up and abstract away the wiring from the generic i2c code in
a similar fashion as quantum and the mcp side behave.
One improvement over the ergodox_ez and the gergoplex firmwares is that
the wiring is straight forward as opposed to swapping rows and columns
in two different places that end up cancelling out for some reason.
At this stage, I have flashed this firmware to a board and have verified
that all keys are behaving as intended by shorting pins.
I still have to solder in some switches and test that everything works
correctly at normal typing speeds, but I don't expect any major issues
given I'm building up on previous effort, including the debouncing code
from the ergodox_ez.
* Remove rotation from info.json and label the keys as per default keymap
* Comply with minor review feedback points
* Use CUSTOM_MATRIX=lite to remove boilerplate
* Update keyboards/handwired/ferris/info.json
Didn't play nicely in the configurator
Co-authored-by: Ryan <fauxpark@gmail.com>
* Remove MIDI_ENABLE from rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
* Remove FAUXCLICKY_ENABLE from rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
* Prefer wait_ms over _delay_ms
Co-authored-by: Ryan <fauxpark@gmail.com>
* Remove unused include
Co-authored-by: Ryan <fauxpark@gmail.com>
* Remove unused include
Co-authored-by: Ryan <fauxpark@gmail.com>
* Remove unused include
Co-authored-by: Ryan <fauxpark@gmail.com>
* Remove unused includeh
Co-authored-by: Ryan <fauxpark@gmail.com>
* Use dprint over print and remove include for print.h
* Remove all unused includes
* Remove unused code
* Cleanups thanks to code review
* Move more personal settings from the ferris config to the default keymap config
These setting happen to be unused in the default keymap at the moment,
as it has only one layer with no homerow modifiers and no mouse key; but
I would like to keep it there for two reasons:
* It can serve as an example to people creating their own keymap
* I plan to design a more usable default keymap that uses these features
once this PR which adds the Ferris keyboard is merged.
* Consolidate mcp logic inside matrix.c
Co-authored-by: Ryan <fauxpark@gmail.com>
