darkkirb/qmk_firmware
1
0
Fork 0
forked from mirrors/qmk_firmware
Code Issues Pull requests Projects Releases Packages Wiki Activity

Merge branch 'master' into develop

Browse source
This commit is contained in:
Dasky 2023-10-26 22:44:14 +01:00
commit c5716f84ad
1 changed files with 1 additions and 1 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

2
docs/serial_driver.md
View file

@ -235,7 +235,7 @@ Where 'n' matches the peripheral number of your selected USART on the MCU.
The `PIO` subsystem is a Raspberry Pi RP2040 specific implementation, using the integrated PIO peripheral and is therefore only available on this MCU. Because of the flexible nature of the PIO peripherals, **any** GPIO pin can be used as a `TX` or `RX` pin. Half-duplex and Full-duplex operation is fully supported. The Half-duplex operation mode uses the built-in pull-ups and GPIO manipulation on the RP2040 to drive the line high by default. An external pull-up is therefore not necessary.
Configure the hardware via your config.h:
You may optionally switch the PIO peripheral used with the following define in config.h:
```c
#define SERIAL_PIO_USE_PIO1 // Force the usage of PIO1 peripheral, by default the Serial implementation uses the PIO0 peripheral
```