darkkirb/qmk_firmware
1
0
Fork 0
forked from mirrors/qmk_firmware
Code Issues Pull requests Projects Releases Packages Wiki Activity

Clarify PIO define is optional in docs. (#22339)

Browse source
This commit is contained in:
Dasky 2023-10-26 22:34:17 +01:00 committed by GitHub
parent d2892685c5
commit e0c00c35ce
No known key found for this signature in database
GPG key ID: 4AEE18F83AFDEB23
2 changed files with 2 additions and 2 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

2
docs/serial_driver.md
View file

@ -235,7 +235,7 @@ Where 'n' matches the peripheral number of your selected USART on the MCU.
The `PIO` subsystem is a Raspberry Pi RP2040 specific implementation, using the integrated PIO peripheral and is therefore only available on this MCU. Because of the flexible nature of the PIO peripherals, **any** GPIO pin can be used as a `TX` or `RX` pin. Half-duplex and Full-duplex operation is fully supported. The Half-duplex operation mode uses the built-in pull-ups and GPIO manipulation on the RP2040 to drive the line high by default. An external pull-up is therefore not necessary.
Configure the hardware via your config.h:
You may optionally switch the PIO peripheral used with the following define in config.h:
```c
#define SERIAL_PIO_USE_PIO1 // Force the usage of PIO1 peripheral, by default the Serial implementation uses the PIO0 peripheral
```

2
docs/ws2812_driver.md
View file

@ -170,7 +170,7 @@ To configure it, add this to your rules.mk:
WS2812_DRIVER = vendor
```
Configure the hardware via your config.h:
You may optionally switch the PIO peripheral used with the following define in config.h:
```c
#define WS2812_PIO_USE_PIO1 // Force the usage of PIO1 peripheral, by default the WS2812 implementation uses the PIO0 peripheral
```