op that can be translated into a mvn instruction.
* gas/arm/ldconst.s gas/arm/ldconst.d: New files. Test ldr with
immediate pseudo-operations.
* gas/arm/arm.exp: Run it.
R_SPARC_DISP32. Support R_SPARC_PLT32.
(sparc_reloc_map): Add BFD_RELOC_16_PCREL and BFD_RELOC_SPARC_PLT32.
(elf32_sparc_check_relocs): Handle R_SPARC_PLT32.
(elf32_sparc_relocate_section): Likewise.
* elf64-sparc.c (sparc64_elf_howto_table): Fix dst_mask for
R_SPARC_DISP32. Support R_SPARC_PLT32 and R_SPARC_PLT64.
(sparc_reloc_map): Add BFD_RELOC_16_PCREL, BFD_RELOC_64_PCREL
and BFD_RELOC_SPARC_PLT32.
(sparc64_elf_check_relocs): Handle R_SPARC_PLT32 and R_SPARC_PLT64.
(sparc64_elf_relocate_section): Likewise.
* reloc.c (bfd_reloc_code_type): Add BFD_RELOC_SPARC_PLT32.
* bfd-in2.h, libbfd.h: Rebuilt.
* config/tc-sparc.h (TC_PARSE_CONS_EXPRESSION): Define.
(sparc_cons): Provide prototype.
* config/tc-sparc.c (tc_gen_reloc): Handle BFD_RELOC_*_PCREL and
BFD_RELOC_SPARC_PLT{32,64}. Enumerate for which relocs
reloc->addend = fixp->fx_addnumber shouldn't be done instead of
enumarating for which pc relative ones it should be done.
(sparc_cons_special_reloc): New variable.
(sparc_cons): New function.
(cons_fix_new_sparc): Use sparc_cons_special_reloc.
* testsuite/gas/sparc/pcrel.s: New test.
* testsuite/gas/sparc/pcrel.d: Expected output.
* testsuite/gas/sparc/pcrel64.s: New test.
* testsuite/gas/sparc/pcrel64.d: Expected output.
* testsuite/gas/sparc/plt.s: New test.
* testsuite/gas/sparc/plt.d: Expected output.
* testsuite/gas/sparc/plt64.s: New test.
* testsuite/gas/sparc/plt64.d: Expected output.
* testsuite/gas/sparc/sparc.exp: Add pcrel, pcrel64, plt and plt64
tests.
2001-12-07 Geoffrey Keating <geoffk@redhat.com>
Richard Henderson <rth@redhat.com>
Corinna Vinschen <vinschen@redhat.com>
* Makefile.am: Add support for xstormy16.
* archures.c: Add support for xstormy16.
* config.bfd: Add support for xstormy16.
* configure.in: Add support for xstormy16.
* reloc.c: Add support for xstormy16.
* targets.c: Add support for xstormy16.
* cpu-xstormy16.c: New file.
* elf32-xstormy16.c: New file.
* Makefile.in: Regenerated.
* bfd-in2.h: Regenerated.
* configure: Regenerated.
* libbfd.h: Regenerated.
Index: binutils/ChangeLog
2001-12-07 Geoffrey Keating <geoffk@redhat.com>
* readelf.c (guess_is_rela): Add support for stormy16.
(dump_relocations): Likewise.
(get_machine_name): Likewise.
Index: gas/ChangeLog
2001-12-07 Geoffrey Keating <geoffk@redhat.com>
Richard Henderson <rth@redhat.com>
* configure.in: Add support for xstormy16.
* configure: Regenerated.
* Makefile.am: Add support for xstormy16.
* Makefile.in: Regenerated.
* config/tc-xstormy16.c: New file.
* config/tc-xstormy16.h: New file.
Index: gas/testsuite/ChangeLog
2001-12-07 Geoffrey Keating <geoffk@redhat.com>
matthew green <mrg@redhat.com>
* gas/xstormy16/allinsn.d: New file.
* gas/xstormy16/allinsn.exp: New file.
* gas/xstormy16/allinsn.s: New file.
* gas/xstormy16/allinsn.sh: New file.
* gas/xstormy16/gcc.d: New file.
* gas/xstormy16/gcc.s: New file.
* gas/xstormy16/gcc.sh: New file.
* gas/xstormy16/reloc-1.d: New file.
* gas/xstormy16/reloc-1.s: New file.
* gas/xstormy16/reloc-2.d: New file.
* gas/xstormy16/reloc-2.s: New file.
Index: ld/ChangeLog
2001-12-07 Geoffrey Keating <geoffk@redhat.com>
Richard Henderson <rth@redhat.com>
* Makefile.am: Add support for xstormy16.
* configure.tgt: Add support for xstormy16.
* Makefile.in: Regenerate.
* emulparams/elf32xstormy16.sh: New file.
* scripttempl/xstormy16.sc: New file.
Index: opcodes/ChangeLog
2001-12-07 Geoffrey Keating <geoffk@redhat.com>
* Makefile.am: Add support for xstormy16.
* Makefile.in: Regenerate.
* configure.in: Add support for xstormy16.
* configure: Regenerate.
* disassemble.c: Add support for xstormy16.
* xstormy16-asm.c: New generated file.
* xstormy16-desc.c: New generated file.
* xstormy16-desc.h: New generated file.
* xstormy16-dis.c: New generated file.
* xstormy16-ibld.c: New generated file.
* xstormy16-opc.c: New generated file.
* xstormy16-opc.h: New generated file.
Index: include/ChangeLog
2001-12-07 Geoffrey Keating <geoffk@redhat.com>
* dis-asm.h (print_insn_xstormy16): Declare.
Index: include/elf/ChangeLog
2001-12-07 Geoffrey Keating <geoffk@redhat.com>
Richard Henderson <rth@redhat.com>
* common.h (EM_XSTORMY16): Define.
* xstormy16.h: New file.
(md_longopts): Allow OPTION_MABI for ELF compilation only. RE-allow
OPTION_GP32, OPTION_GP64, OPTION_FP32 for non-ELF compilation.
Sort options a bit more logical.
(md_parse_option): Allow OPTION_32, OPTION_N32, OPTION_N64,
OPTION_MABI only for elf targets.
* gas/mips/mips.exp: Change naming of some conditionals to reflect
the object format they actually mean. Don't try mips-abi32 and
mips-abi32-pic tests for ecoff.
2001-11-04 Chris Demetriou <cgd@broadcom.com>
* configure.in (mips-*-netbsd*): Add support for target.
* configure: Regenerate.
[ gas/testsuite/ChangeLog ]
2001-11-04 Chris Demetriou <cgd@broadcom.com>
* gas/mips/mips.exp (svr4pic): Set if target is *-*-netbsd*.
(aout): Don't set if *-*-netbsd*.
[ ld/ChangeLog ]
2001-11-04 Chris Demetriou <cgd@broadcom.com>
* configure.tgt (mips*el-*-netbsd*, mips*-*-netbsd*):
Add support for targets.
2001-10-31 Chris Demetriou <cgd@demetriou.com>
* elf32-mips.c (_bfd_mips_elf_hi16_reloc): Handle PC-relative
relocations properly.
[ gas/ChangeLog ]
2001-10-31 Chris Demetriou <cgd@broadcom.com>
* config/tc-mips.c (HAVE_32BIT_ADDRESSES): If compiling embedded
PIC code, assume pointers the same size as GPRs.
(macro): In M_LA_AB handling for embedded PIC code, support
"la $treg,foo-bar($breg)". In load/store handling
(label ld_st) support "<op> $treg,<sym>-<local_sym>($breg)"
which is used by the compiler for switch statements.
In load/store double multi-instruction macro handling
(label ldd_std) add a comment that no special handling
is currently done for embedded PIC.
(mips_ip): In 'o' (16-bit offset) case, only accept 16
bit offsets.
[ gas/testsuite/ChangeLog ]
2001-10-31 Chris Demetriou <cgd@broadcom.com>
* gas/mips/empic.s: Undo damage inflicted on 2000-12-02.
* gas/mips/empic.d: Likewise.
* gas/mips/elempic.d: Likewise (it was copied into other files).
* gas/mips/telempic.d: Likewise.
* gas/mips/tempic.d: Likewise.
* gas/mips/empic2.s: New test to check new 'la' and 'lw' (and
related ops) syntax, test loads with large offsets.
* gas/mips/emcic2.d: Likewise.
* gas/mips/mips.exp: Run the new test on ELF platforms.
2001-10-21 Chris Demetriou <cgd@broadcom.com>
* mips-opc.c (mips_builtin_opcodes): Mark "bgezall" and
"bltzall" as writing GPR 31 (since they do).
* mips-dis.c (print_insn_arg): Calculate info->target
where appropriate.
(print_insn_mips): Fill in instruction info.
(print_mips16_insn_arg): Remove unneded variable 'val'.
Removed duplicated instruction target calculations,
calculate once and print that result. Use same idiom for
masking the jump segment bits as is used in print_insn_arg.
[gas/testsuite/ChangeLog]
2001-10-21 Chris Demetriou <cgd@broadcom.com>
* gas/mips/beq.s: Add zero words at end of instructions so
that objdump will print "..." when disassembling.
* gas/mips/beq.d: Update for disassembler changes which force
branch delay-slot nops to be printed.
* gas/mips/bge.d: Ditto.
* gas/mips/bgeu.d: Ditto.
* gas/mips/blt.d: Ditto.
* gas/mips/bltu.d: Ditto.
* gas/mips/jal-svr4pic.d: Ditto.
* gas/mips/jal-xgot.d: Ditto.
2001-10-17 Chris Demetriou <cgd@broadcom.com>
* gas/mips/mips.exp (sb1-ext-ps): New test to test
SB-1 core's paired-single extensions to the MIPS64 ISA.
* gas/mips/sb1-ext-ps.d: New file.
* gas/mips/sb1-ext-ps.s: New file.
[include/opcode/ChangeLog]
2001-10-17 Chris Demetriou <cgd@broadcom.com>
* mips.h (INSN_SB1): New cpu-specific instruction bit.
(OPCODE_IS_MEMBER): Allow instructions matching INSN_SB1
if cpu is CPU_SB1.
[opcodes/ChangeLog]
2001-10-17 Chris Demetriou <cgd@broadcom.com>
* mips-dis.c (mips_isa_type): Make the ISA used to disassemble
SB-1 binaries include instructions specific to the SB-1.
* mips-opc.c (SB1): New definition.
(mips_builtin_opcodes): Add SB-1 extension opcodes "div.ps",
"recip.ps", "rsqrt.ps", and "sqrt.ps".
* gas/ppc/booke.s (rfci, wrtee, wrteei, mfdcrx, mfdcr, mtdcrx,
mtdcr, msync, dcba, mbar): New BookE tests.
* gas/ppc/booke.d: Update for new BookE tests.
[opcodes/ChangeLog]
* ppc-opc.c (MO): New macro for MO field of mbar instruction.
(powerpc_opcodes): Add rfci, wrtee, wrteei, mfdcrx, mfdcr,
mtdcrx, mtdcr, msync, dcba and mbar as BookE instructions.
* config/tc-ppc.c (md_parse_option): New -m7410, -m7450 and -m7455
flags, equivalent to -m7400. New -maltivec to enable AltiVec
instructions. New -mbook64 and -mbooke/-mbooke32 flags to enable
64-bit and 32-bit BookE support, respectively. Change -m403 and
-m405 to set PPC403 option.
(md_show_usage): Adjust for new options.
* doc/all.texi: Set PPC.
* doc/as.texinfo: Add PPC support and pull in c-ppc.texi.
* doc/c-ppc.texi: New file.
* doc/Makefile.am (CPU_DOCS): Add c-ppc.texi.
* doc/Makefile.in: Regenerate.
[gas/testsuite/ChangeLog]
* gas/ppc/booke.s: New test for Motorola BookE.
* gas/ppc/booke.d: New file.
* gas/ppc/ppc.exp: Test booke.s.
[include/opcode/ChangeLog]
* ppc.h (PPC_OPCODE_BOOKE, PPC_OPCODE_403): New opcode flags for
BookE and PowerPC403 instructions.
[opcodes/ChangeLog]
* ppc-opc.c (insert_de, extract_de, insert_des, extract_des): New
instruction field instruction/extraction functions for new BookE
DE form instructions.
(CT): New macro for CT field in an X form instruction.
(DE, DES, DEO, DE_MASK): New macros for DE/DES fields in DE form
instructions.
(PPC64): Don't include PPC_OPCODE_PPC.
(403): New opcode macro for PPC403 processors.
(BOOKE): New opcode macro for BookE processors.
(bce, bcel, bcea, bcela, bclre, bclrel: New BookE instructions.
(bcctre, bcctrel, be, bel, bea, bela, icbt, icbte, lwzxe): Likewise.
(dcbste, lwzuxe, luxe, dcbfe, lbzxe, lwarxe, lbzuxe): Likewise.
(stwcxe, stwxe, stxe, stwuxe, stuxe, stbxe, dcbtste, stbuxe): Likewise.
(mfapidi, dcbte, lhzxe, lhzuxe, lhaxe, lhauxe, subfe64): Likewise.
(subfeo64, adde64, addeo64, sthxe, sthuxe, subfze64): Likewise.
(subfzeo64, addze64, addzeo64, dcbie, subfme64, subfmeo64): Likewise.
(addme64, addmeo64, stdcxe., mcrxr64, lwbrxe, lfsxe, lfsuxe): Likewise.
(lfdxe, lfduxe, stwbrxe, stfsxe, stfsuxe, stfdxe, dcbae): Likewise.
(stfduxe, tlbivax, tlbivaxe, lhbrxe, ldxe, lduxe, tlbsx): Likewise.
(tlbsxe, sthbrxe, stdxe, stduxe, icbie, stfiwxe, dcbze, lbze): Likewise.
(lbzue, ldue, lhze, lhzue, lhae, lhaue, lwze, lwzue): Likewise.
(stbe, stbue, sthe, sthue, stwe, stwue, lfse, lfsue, lfde): Likewise.
(lfdue, stde, stdue, stfse, stfsue, stfde, stfdue): Likewise.
* ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc): Look
for a disassembler option of `booke', `booke32' or `booke64' to enable
BookE support in the disassembler.
