* solib.[hc] (find_pc_section_from_so_list): new function and
prototype.
* sparc-tdep.c (in_solib_trampoline): new function.
* symfile.[hc] (find_pc_section): new function and prototypes.
* target.[hc] (find_pc_section_from_targets): new function and
prototypes.
* config/sparc/tm-sun4sol2.h (IN_SOLIB_TRAMPOLINE): redefine to
in_solib_trampoline.
* command.c (do_setshow_command): Use %u with var_{u,z}integer.
* command.{c,h}: New var_type var_integer.
main.c: Use it for history_size.
* rs6000-tdep.c, xcoffexec.c, config/rs6000/xm-rs6000.h, breakpoint.c:
Lint and byte-order fixups.
of reading/writing registers that are shorter than REGISTER_TYPE.
* (value_from_register): Install H8500 specific code to return
proper value when register is being used as a pointer.
* h8500-tdep.c: Remove extra defines of NUM_REGS.
(h8500_skip_prologue): Use correct lengths for LINK instructions.
(FRAME_CHAIN): Change name to h8500_frame_chain. Rewrite code to
chain frames properly by combining frame pointer with T reg.
(init_extra_frame_info): Delete. It's now a macro.
(frame_args_address): Don't add PTR_SIZE. Stack args are already
offset by the correct amount off of the frame pointer.
(register_byte): Delete. It's now a macro.
(register_raw_size, register_virtual_size): Delete. Replaced by
common routine h8500_register_size, cuz there's no difference
between the raw & virtual sizes on this machine.
(register_convert_to_raw, register_convert_to_virtual): Delete,
cuz there's no difference between the raw & virtual forms.
Replaced by memcpy in tm file.
(register_virtual_type): Rename to h8500_register_virtual_type.
Get rid of pointer pseudo-regs, use _REGNUM with all reg names.
(_initialize_h8500_tdep): Get rid of crock to ensure that GDB &
emulator have same reg offsets. This is all handled in the
simulator code now.
(h8500_trapped_internalvar): New routine to detect references to
convenience vars acting as pointer pseudo-regs.
(h8500_value_trapped_internalvar): Conjure up value of pointer
pseudo-regs.
(h8500_set_trapped_internalvar): Convert set value in real
register references.
infcmd.c (read_pc, write_pc): Add h8500 specific code to handle
code segment register.
infrun.c (proceed): Simplify. Call write_pc instead of doing it
by hand.
(wait_for_inferior): Add h8500 specific code to add stack segment
when reading SP register.
remote-sim.c (fetch_register): Spacing.
tm-h8500.h: #define GDB_TARGET_IS_H8500 to make it easier to
detect cruft. Redo all register manipulation stuff. Get rid of
pointer pseudo-regs. (INIT_EXTRA_FRAME_INFO): Adds stack segment
to frame pointer. (IS_TRAPPED_INTERNALVAL,
VALUE_OF_TRAPPED_INTERNALVAR, SET_TRAPPED_INTERNALVAR): Use these
to create internal vars for pointer pseudo-regs.
config files moved to an appropriate config/<cpu> subdirectory.
* nm-*, xm-*, tm-*: All native, host, and target files, which
get linked to nm.h, xm.h, and tm.h respectively by configure,
moved to appropriate config/<cpu> subdirectory.
m88k, mips, none, ns32k, pa, pyr, romp, rs6000, sparc, tahoe, vax,
z8k}: New directories to hold cpu specific configuration files.
Naming follows gcc convention.
* config/{*.mt, *.mh}: All target and host makefile fragment
config files moved to an appropriate config/<cpu> subdirectory.
This is defined in defs.h if necessary.
* vx-share/vxWorks.h: Remove #defs of min and max.
* vx-share/xdr_ld.c, vx-share/xdr_ptrace.c,
vx-share/xdr_rdb.c: include defs.h.
reported by mycroft@gnu.ai.mit.edu.
(Ultrix 2.2 support from Michael Rendell <michael@mercury.cs.mun.ca>)
* configure.in (vax-*-ultrix2*): New triplet.
* config/vaxult2.mh: New file.
* xm-vaxult2.h: New file.
protocol.
* config/idt.mt: New file; uses remote-mips.c
* configure.in (mips-idt-ecoff): New target; uses idt.mt.
* mips-tdep.c (mips_fpu): New variable; controls use of MIPS
floating point coprocessor.
(mips_push_dummy_frame): If not mips_fpu, don't save floating
point registers.
(mips_pop_frame): If not mips_fpu, don't restore floating point
registers.
(_initialize_mips_tdep): New function; let the user reset mips_fpu
variable.
* tm-mips.h (EXTRACT_RETURN_VALUE, STORE_RETURN_VALUE): If not
mips_fpu, don't use fp0 as floating point return register.
(FIX_CALL_DUMMY): If not mips_fpu, don't save floating point
registers.
Also added remote-mips.c to .Sanitize file.
* Based on patch from Martin Walker <maw@netcom.com>:
* nm-i386sco4.h: New file. Like nm-i386sco.h, but define
ATTACH_DETACH, PTRACE_ATTACH and PTRACE_DETACH.
* config/i386sco4.mh (NAT_FILE): Use nm-i386sco4.h.
* coffread.c (decode_type): catch negative tagndx fields generated
by SCO 3.2v4 cc.
* exec.c: comment out string following #endif.
* configure.in (i[34]86-*-sco3.2v4*): use host i386sco4.
* xm-i386sco.h: include <sys/types.h> and <sys/dir.h>, required by
<sys/user.h>.
* config/i386sco4.mh: new file; like i386sco.mh, but don't require
gcc, and define const to empty to avoid SCO 3.2v4 cc bug.
* config/amix.mh (NAT_FILE): Add, set to nm-sysv4.h.
* config/amix.mh (NATDEPFILES): Add.
* config/amix.mh (XDEPFILES): Move procfs.o and fork-child.o
to NATDEPFILES.
* dwarfread.c (decode_subscr_data): Remove spurious test that
accepted only integer subscript types. We don't do anything
with the type at the moment anyway.
29k-share/dfe/mini2udi.o.
* config/a29k-udi.mt: Remove yank.o and mini2udi.o.
* alldeps.mak, depend: Update to deal with removal of
aforementioned files.
* remote-udi.c: Major cleanups. Clean up udi_open and drop
requirement for useless 'program' argument. Clean up
udi_create_inferior, and udi_load to call common download()
routine. Create download routine to load remote hosts directly
(with the help of BFD) so that we don't need yank.c and
mini2udi.c.
Fix udi_detach to call UDIDisconnect with
the right arguments. Clean up udi_resume, don't assign tip_error
twice. Clean up udi_wait, straighten out status codes. Make
udi_kill really work.
* dwarfread.c: include <sys/types.h> for SCO.
* infptrace.c: Don't include ptrace.h under SCO.
* config/i386sco.mh: Use -D_POSIX_SOURCE instead of -posix for
gcc.
* config/i386v.mt: Add exec.o to TDEPFILES.
coredep.c, but zero out FP_REGNUM & ZERO_REGNUM so that stack
backtraces from core files work.
* config/decstation.mh, config/irix3.mh: Remove coredep.o.
Functions are now defined in mips-nat.c.
* infptrace.c: remove #ifdef USG from around include ptrace.h.
machines without this header should not be compiling this file.
* nm-rs6000.h, rs6000-nat.c: new files for native support.
* rs6000-tdep.c: do not include sys/ptrace.h or sys/reg.h.
* rs6000-xdep.c: removed. all code now in rs6000-nat.c.
* xm-rs6000.h: do not include ptrace.h.
(ATTACH_DETACH, FETCH_INFERIOR_REGISTERS): moved to nm-rs6000.h.
* config/rs6000.mh (XDEPFILES): removed rs6000-xdep.o.
infptrace.o and inftarg.o move to NATDEPFIES.
(NAT_FILE, NATDEPFILES): new macro for native support.
* config/sun3os3.mh, config/sun3os4.mh (NAT_FILE, NATDEPFILES):
new macros for native support.
(XDEPFILES): moved infptrace.o and inftarg.o to NATDEPFILES,
removed sun3-xdep.o.
* xm-sun3.h (ATTACH_DETACH, FETCH_INFERIOR_REGISTERS): moved to
nm-sun3.h.
* sun3-xdep.c: removed. All code is now in sun3-nat.c.
* sun3-nat.c, nm-sun3.h: new files for native support.
* nat-sparc.c -> sparc-nat.c
* nat-sun4os4.h -> nm-sun4os4.h
* nat-trash.h -> nm-trash.h
* configure.in: link to nm.h rather than nat.h.
* infptrace.c: include nm.h rather than nat.h.
* Makefile.in (TSOBS): removed corelow.o.
* infptrace.c: included nat.h.
* nat-trash.h: temporary header file. This should be removed once
all hosts have the native/host/target split.
* configure.in: add a symlink from nat-trash.h to nat.h if no
other nat file exists for this configuration.
* sparc-tdep.c: no longer include sys/ptrace.h.
* sparc-xdep.c: removed. contents have been moved to nat-sparc.c.
* xm-sparc.h (ATTACH_DETACH, FETCH_INFERIOR_REGISTERS): moved to
nat-sun4os4.h.
* nat-sparc.c, nat-sun4os4.h: new files for sun4 native support.
* config/sun4os4.mh (XDEPFILES): moved infptrace.o and inftarg.o
to NATDEPFILES. removed sparc-xdep.o.
(NATDEPFILES, NAT_FILE): new macros for native support.
should include a ser-XXX.o module.
* configure.in: Map unrecognized sun 68k's, sun sparcs, into
known suns in configure.in, rather than mapping them to unique
config files that happen to duplicate other config files.
* config/sun3.{mh,mt}: Remove (use identical sun3os4.*).
* config/sun4.{mh,mt}: Remove (use identical sun4os4.*).
at_import, at_frame_base.
* dwarfread.c (completedieinfo): Remove cases for obsolete
AT_visibility, AT_import, and AT_frame_base attributes.
* breakpoint.h (BREAKPOINT_MAX): Increase from 10 to 16 for
i860, which can keep up to 4 shadow breakpoints.
* tm-stratus.h (USG): Define.
* tm-stratus.h (TARGET_BYTE_ORDER): Define to BIG_ENDIAN.
* xm-stratus.h (HOST_BYTE_ORDER): Define to BIG_ENDIAN.
* xm-stratus.h (xm-sysv4.h): Include, name changed from xm-svr4.h.
* xm-stratus.h (NO_JOB_CONTROL): Remove define.
* config/stratus.mt (TDEPFILES): Include files available from
stratus that are not yet in release pending receipt of paperwork
at FSF.
* buildsym.c (finish_block): Minor code format change.
* gdbtypes.h (struct field): Add to comments.
* gdbtypes.h (virtual_field_bits): Add to comments.
* objfiles.c (allocate_objfile): Change obstack interface to
match FSF merging efforts.
* symtab.c (decode_line_1): Until C++ support stabilizes, when
C++ lookups fail, print possibly helpful hint about completion.
* cplus-dem.c (demangle_signature): Fix ARM style demangling
for static data members.
* dbxread.c (dbx_psymtab_to_symtab_1): Fix prototype.
* config/ncr3000.mh (INSTALL): Don't use /usr/ucb/install,
it's broken on ncr3000's.
* buildsym.c (read_sun_builtin_type, read_sun_floating_type): New.
(define_symbol): Skip arg types in function entries. Resolve
overloaded 'P' which acc uses for prototypes of functions called
by this file.
(read_type: 'b', 'r'): Handle Solaris2 builtin types.
* minsyms.c (prim_record_minimal_symbol_and_info): Hack to
save size of ELF symbols. FIXME.
* tm-sun4os5.h: Rename to tm-sun4sol2.h. Update defines for Sol2.
* xm-sun4os5.h: Rename to xm-sun4sol2.h. Hack more defines.
* config/sun4os5.m[ht]: Rename to config/sun4sol2.m[ht]; new xm, tm.
* Makefile.in, config/*.mh, config/*.mt: Rename TM_CFLAGS
to MT_CFLAGS, XM_CFLAGS to MH_CFLAGS to match file names.
* config/sun4os5.mh: Add MH_CFLAGS=-xs to save debug info.
* defs.h: if xm.h doesn't define FOPEN_RB, include "fopen-same.h",
allowing hosts with different text and binary file formats to
work.
* coffread.c (read_coff_symtab): changed calling convention and
operation - now it opens its own file with FOPEN_RB rather than
duping and fdopening the provided handle.
* dbxread.c, cplus-dem.c: #include mangling.
* exec.c: If O_BINARY isn't defined, set it to 0, call openp for
binary files oring in the right bit.
* utils.c, terminal.h, inflow.c: hackery because dos doesn't have terminals.
* remote-hms.c: cleanup to use the new remote serial stuff
* serial.h, ser-termios.c, ser-go32.c: newfiles to provide host
independent remote terminal I/O.
* remote.c: if DONT_USE_REMOTE is defined, then don't use it.
* source.c (openp): fix off by one problem removing / - can now
open a source file in the root directory with DOS.
* values.c (value_as_pointer): remove bogus address bits from
long. (unpack_long): unpack into unsigned long/short if pointer.
sun4.mh: use the ser-termios stuff
go32.mh: use the ser-go32 stuff
flags to disable use of GNU malloc/mmalloc.
* munch: Change SYSV rule to allow .text before the label,
as well as after, to work for AIX.
* gdbtypes.h: Minor clarifiction.
alloca, but only if it is not found in the std C library. Also forces
libc to be search before libucb.a, which contains much broken stuff we
*don't* want.
and eliminates host dependency on double<->extended conversions.
* i386-xdep.c, symm-xdep.c: Remove most 387 support.
* xconfig/i386{sco,v,v-g,v32,v32-g}: Now need i387-tdep.o.
