(COP_INSN): New macro.
(is_opcode_valid): Use them.
(macro) <ld_st>: Use them. Don't accept coprocessor load store
insns based on the ISA if CPU is NO_ISA_COP.
<copz>: Likewise for coprocessor operations.
2008-06-24 Eric B. Weddington <eric.weddington@atmel.com>
Add support for ATtiny13A.
* config/tc-avr.c (mcu_types): Add attiny13a.
* doc/c-avr.texi: Likewise.
config/
* override.m4: Use m4_version_prereq throughout.
(_AC_ARG_VAR_VALIDATE, AC_MSG_FAILURE): Backport from git
Autoconf: output pwd along with fatal errors, so the right
config.log file is hinted at more prominently.
(PARSE_ARGS): Push setting of ac_pwd in this diversion.
(_GCC_AUTOCONF_VERSION): New, define to 2.59 if not defined.
(_GCC_AUTOCONF_VERSION_CHECK): New macro, require use of Autoconf
version _GCC_AUTOCONF_VERSION throughout the tree.
(m4_wrap): New override, fix for Posix semantics of m4wrap.
binutils/
* configure: Regenerate.
opcodes/
* configure: Regenerate.
bfd/
* configure: Regenerate.
gas/
* configure: Regenerate.
gprof/
* configure: Regenerate.
ld/
* config.in: Regenerate.
* configure: Regenerate.
* ti.h (GET_SCNHDR_NLNNO): Provide an alternative version of this
macro which does not trigger an array bounds warning in gcc.
(PUT_SCNHDR_NLNNO): Likewise.
(GET_SCNHDR_FLAGS): Likewise.
(PUT_SCNHDR_FLAGS): Likewise.
(GET_SCNHDR_PAGE): Likewise.
(PUT_SCNHDR_PAGE): Likewise.
* config/tc-mmix.c (s_loc): Assume "negative" addresses belong to
text_section. Do the "stepping backwards" test for text_section
using unsigned operands.
(OP_SH_SEQI, OP_MASK_SEQI): New bit mask and shift count for SEQI.
opcodes/
* mips-dis.c (print_insn_args): Handle field descriptor +Q.
* mips-opc.c (mips_builtin_opcodes): Add Octeon instructions seq,
seqi, sne and snei.
gas/
* config/tc-mips.c (validate_mips_insn): Handle field descriptor +Q.
(mips_ip): Likewise.
(macro_build): Likewise.
(CPU_HAS_SEQ): New macro.
(macro2) <M_SEQ_I, M_SNE_I>: Use it. Emit seq/sne and seqi/snei.
gas/testsuite/
* gas/mips/octeon.s, gas/mips/octeon.d: Add tests for seq* and sne*.
* gas/mips/octeon-ill.s, gas/mips/octeon-ill.s: Add tests for seqi
and snei.
2008-06-09 Eric B. Weddington <eric.weddington@atmel.com>
* config/tc-avr.c (mcu_types): Remove support for ATmega32HVB device.
* doc/c-avr.texi: Likewise.
* config/tc-mips.c (mips_frob_file): Don't match MIPS16 relocs
with non-MIPS16 relocs.
gas/testsuite/
* gas/mips/mips16-hilo-match.s: New test.
* gas/mips/mip16-hilo-match.d: New test output.Index: config/tc-mips.c
* elf32-xtensa.c (xtensa_property_section_name): New.
(xtensa_make_property_section): New.
(xtensa_get_property_section): Make static. Do not create a new
section if it does not exist.
gas/
* config/tc-xtensa.c (xtensa_create_property_segments): Use
xtensa_make_property_section instead of xtensa_get_property_section.
(xtensa_create_xproperty_segments): Likewise.
New statics.
(OPTION_ELF_BASE): Make room for new option macros.
(OPTION_SOFT_FLOAT, OPTION_HARD_FLOAT, OPTION_SINGLE_FLOAT,
OPTION_DOUBLE_FLOAT): New option macros.
(md_longopts): Add msoft-float, mhard-float, msingle-float and
mdouble-float.
(md_parse_option): Handle OPTION_SINGLE_FLOAT,
OPTION_DOUBLE_FLOAT, OPTION_SOFT_FLOAT and OPTION_HARD_FLOAT.
(md_show_usage): Add -msoft-float, -mhard-float, -msingle-float
and -mdouble-float.
(struct mips_set_options): New fields soft_float and single_float.
(mips_opts): Initialized them. Add comment for each field
initializer.
(mips_after_parse_args): Set them based on file_mips_soft_float
and file_mips_single_float.
(s_mipsset): Add support for `.set softfloat', `.set hardfloat',
`.set singlefloat' and `.set doublefloat'.
(is_opcode_valid): New function to invoke OPCODE_IS_MEMBER.
Handle single-float and soft-float instructions here.
(macro_build, mips_ip): Use it instead of OPCODE_IS_MEMBER.
(is_opcode_valid_16): New function.
(mips16_ip): Use it instead of OPCODE_IS_MEMBER.
(macro) <M_LDC1_AB, M_SDC1_AB, M_L_DOB, M_L_DAB, M_S_DAB,
M_S_DOB>: Remove special-casing of r4650.
* doc/c-mips.texi (-march=): Add Octeon.
(MIPS Opts): Document -msoft-float and -mhard-float. Document
-msingle-float and -mdouble-float.
(MIPS floating-point): New section. Document `.set softfloat' and
`.set hardfloat'. Document `.set singlefloat' and `.set
doublefloat'.
* config/tc-sparc.c: Accept 'softint_clear' and 'softint_set'
%asr aliases.
* doc/c-sparc.texi: Consistently refer to architecture 'versions',
rather than occaisionally 'levels'. Consistently refer to Sun's
UNIX variant as SunOS, every version of Solaris is also SunOS.
Document new 'softint_clear' and 'softint_set' aliases. Clarify
which architecture versions support '%dcr', '%cq', and '%gl'. Add
section on 32-bit/64-bit opcode translations.
opcodes/
* sparc-dis.c: Emit %stick instead of %sys_tick, and %stick_cmpr
instead of %sys_tick_cmpr, as suggested in architecture manuals.
* Makefile.am (OBJ_FORMAT_CFILES): Add config/obj-fdpicelf.c.
(OBJ_FORMAT_HFILES): Add config/obj-fdpicelf.h.
(obj-fdpicelf.o): Define.
* Makefile.in: Regenerate.
* configure.tgt: Set bfd_gas to yes when fmt is fdpicelf.
(bfin-*-*): Delete.
(bfin-*-linux-uclibc): New; set fmt to fdpicelf and em to linux.
(bfin-*-uclinux*): New; set fmt to elf and em to linux.
* config/obj-fdpicelf.c: New.
* config/obj-fdpicelf.h: Likewise.
* config/tc-bfin.c (bfin_flags, bfin_pic_flag): Set default based on
the OBJ_FDPIC_ELF define.
(OPTION_NOPIC): Define.
(md_longopts): Add mnopic and mno-fdpic.
(md_parse_option): Handle OPTION_NOPIC.
listings such as gas version, passed options, and time stamp.
(listing_general_info): New function.
(print_options): New function.
(print_single_option): New function.
(print_timestamp): New function.
(MAX_DATELEN): Define.
(listing_print): Add call to listing_general_info.
* listing.h (LISTING_GENERAL): Define.
(listing_print): Add new parameter.
* as.c (show_usage): Print new switch.
(parse_args): Parse new switch.
(main): Pass command line on to listing_print.
* NEWS: Mention this new feature.
* doc/as.texinfo: Document the new sub-option.
* gas/all/gas.exp: Check the performance of the -ag command line
switch.
call. Delete out of date comment.
(dwarf2_consume_line_info): Always clear dwarf2_loc_directive_seen.
(dwarf2_emit_label): Don't emit unless there has been a previous
.file or we are outputting assembler generated debug.
dwarf2_consume_line_info after emitting line info, not before.
(out_debug_info): Simplify files_in_use test.
* config/tc-sh64.c (shmedia_md_pcrel_from_section): Use
md_pcrel_from_section for BFD_RELOC_64 and BFD_RELOC_64_PCREL.
* gas/sh/sh64/eh-1.d: New.
* gas/sh/sh64/eh-1.d: Likewise.
