Oleg Nesterov told me that the Linux kernel copies the parent's ptrace
options to fork/clone children, so there's no need for GDB to do that
manually.
I was actually a bit surprised, since I thought the ptracer had to
always set the ptrace options itself, and GDB is indeed calling
PTRACE_SETOPTIONS for each new fork child, if it'll stay attached.
Looking at the history of that code, I found that is was actually I
who added that set-ptrace-options-in-children bit, back in
http://sourceware.org/ml/gdb-patches/2009-05/msg00656.html. But,
honestly, I don't recall why I needed that. I think I may have just
blindly believed it was necessary.
I then looked back at the history of all the PTRACE_SETOPTIONS code we
have, and found that gdb never did copy the ptrace options before my
patch. But, when gdbserver learnt to use PTRACE_EVENT_CLONE, at
http://sourceware.org/ml/gdb-patches/2007-10/msg00547.html, it was
made to do 'ptrace (PTRACE_SETOPTIONS, new_pid, 0,
PTRACE_O_TRACECLONE)' for all new clones. Hmmm. But, GDB itself
never did that, so it can't really ever have been necessary, I
believe, otherwise GDB should have been doing it too.
(GDBserver doesn't support following forks, and so naturally doesn't
do any PTRACE_SETOPTIONS on fork children.)
So this patch removes the -I believe- unnecessary ptrace syscalls.
Tested on x86_64 Fedora 17, native/gdbserver, and on x86_64 RHEL5
native/gdbserver (Linux 2.6.18, I think a ptrace-on-utrace kernel).
No regressions.
gdb/
2013-03-22 Pedro Alves <palves@redhat.com>
* linux-nat.c (linux_child_follow_fork): Don't call
linux_enable_event_reporting.
(linux_handle_extended_wait): Don't call
linux_enable_event_reporting.
gdb/gdbserver/
2013-03-22 Pedro Alves <palves@redhat.com>
* linux-low.c (handle_extended_wait): Don't call
linux_enable_event_reporting.
This fixes the followin error when HAVE_LINUX_BTRACE is not defined:
linux-low.c:5943: error: excess elements in struct initializer
linux-low.c:5943: error: (near initialization for 'linux_target_ops')
gdb/gdbserver/ChangeLog:
* linux-low.c (linux_target_ops) [!HAVE_LINUX_BTRACE]:
Remove extraneous NULL element.
the last matched 'V' blcok in trace frame.
gdb/gdbserver:
* tracepoint.c (traceframe_read_tsv): Look for the last matched
'V' block in trace frame.
gdb/testsuite:
* gdb.trace/tsv.exp (check_tsv): New.
(top level): Save a tfile on current trace session. Call
check_tsv on live target. Load the tfile with target tfile
and call check_tsv again.
We define the following packets:
Qbtrace:bts enable branch tracing for the current thread
returns "OK" or "Enn"
Qbtrace:off disable branch tracing for the current thread
returns "OK" or "Enn"
qXfer:btrace:read read the full branch trace data for the current thread
gdb/
* target.h (enum target_object): Add TARGET_OBJECT_BTRACE.
* remote.c: Include btrace.h.
(struct btrace_target_info): New struct.
(remote_supports_btrace): New function.
(send_Qbtrace): New function.
(remote_enable_btrace): New function.
(remote_disable_btrace): New function.
(remote_teardown_btrace): New function.
(remote_read_btrace): New function.
(init_remote_ops): Add btrace ops.
(enum <unnamed>): Add btrace packets.
(struct protocol_feature remote_protocol_features[]): Add btrace packets.
(_initialize_remote): Add packet configuration for branch tracing.
gdbserver/
* target.h (struct target_ops): Add btrace ops.
(target_supports_btrace): New macro.
(target_enable_btrace): New macro.
(target_disable_btrace): New macro.
(target_read_btrace): New macro.
* gdbthread.h (struct thread_info): Add btrace field.
* server.c: Include btrace-common.h.
(handle_btrace_general_set): New function.
(handle_btrace_enable): New function.
(handle_btrace_disable): New function.
(handle_general_set): Call handle_btrace_general_set.
(handle_qxfer_btrace): New function.
(struct qxfer qxfer_packets[]): Add btrace entry.
* inferiors.c (remove_thread): Disable btrace.
* linux-low: Include linux-btrace.h.
(linux_low_enable_btrace): New function.
(linux_low_read_btrace): New function.
(linux_target_ops): Add btrace ops.
* configure.srv (i[34567]86-*-linux*): Add linux-btrace.o.
Add srv_linux_btrace=yes.
(x86_64-*-linux*): Add linux-btrace.o.
Add srv_linux_btrace=yes.
* configure.ac: Define HAVE_LINUX_BTRACE.
* config.in: Regenerated.
* configure: Regenerated.
Hafiz Abid Qadeer <abidh@codesourcery.com>
gdb/
* NEWS: Mention set and show trace-buffer-size commands.
Mention new packet.
* target.h (struct target_ops): New method
to_set_trace_buffer_size.
(target_set_trace_buffer_size): New macro.
* target.c (update_current_target): Set up new method.
* tracepoint.c (trace_buffer_size): New global.
(start_tracing): Send it to the target.
(set_trace_buffer_size): New function.
(_initialize_tracepoint): Add new setshow for trace-buffer-size.
* remote.c (remote_set_trace_buffer_size): New function.
(_initialize_remote): Use it.
(QTBuffer:size) New remote command.
(PACKET_QTBuffer_size): New enum.
(remote_protocol_features): Add an entry for
PACKET_QTBuffer_size.
gdb/gdbserver/
* tracepoint.c (trace_buffer_size): New global.
(DEFAULT_TRACE_BUFFER_SIZE): New define.
(init_trace_buffer): Change to one-argument function. Allocate
trace buffer memory.
(handle_tracepoint_general_set): Call cmd_bigqtbuffer_size to
handle QTBuffer:size packet.
(cmd_bigqtbuffer_size): New function.
(initialize_tracepoint): Call init_trace_buffer with
DEFAULT_TRACE_BUFFER_SIZE.
* server.c (handle_query): Add QTBuffer:size in the
supported packets.
gdb/doc/
* gdb.texinfo (Starting and Stopping Trace Experiments): Document
trace-buffer-size set and show commands.
(Tracepoint Packets): Document QTBuffer:size.
(General Query Packets): Document QTBuffer:size.
gdb/testsuite/
* gdb.trace/trace-buffer-size.exp: New file.
* gdb.trace/trace-buffer-size.c: New file.
* tracepoint.c (cur_action, cur_step_action): Make them unsigned.
(cmd_qtfp): Initialize cur_action and cur_step_action 0 instead
of -1.
(cmd_qtsp): Adjust condition. Do post increment.
Set cur_action and cur_step_action back to 0.
PROBLEM:
The function linux_write_memory () in linux-low.c allocates a buffer
on the stack to hold a copy of the data to be written.
register PTRACE_XFER_TYPE *buffer = (PTRACE_XFER_TYPE *)
alloca (count * sizeof (PTRACE_XFER_TYPE));
"count" is the number of bytes to be written, rounded up to the
nearest multiple of sizeof (PTRACE_XFER_TYPE) and allowing for not
being an aligned address. The function later uses
buffer[0] = ptrace (PTRACE_PEEKTEXT, pid,
(PTRACE_ARG3_TYPE) (uintptr_t) addr, 0);
The problem is that this function can be called to write zero bytes on
an aligned address, for example when receiving an X packet of length 0
(used to test if 8-bit write is supported). Under these circumstances,
count can be zero.
Since in this case, buffer[0] may never have been allocated, the stack
is corrupted and gdbserver may crash.
SOLUTION:
Writing zero bytes should always succeed. The patch below returns
successfully early if the length is zero, so avoiding the stack
corruption.
Verified on the ARC GDB 7.5.1 port.
2013-03-07 Jeremy Bennett <jeremy.bennett@embecosm.com>
PR server/15236
* linux-low.c (linux_write_memory): Return early success if LEN is
zero.
printf-like functions to avoid type related warnings on all
platforms.
(get_child_debug_event): Print dwDebugEventCode as hex since
that's how it's usually documented.
* regformats/reg-tilegx.dat (name): Change abi name to "tilegx".
* regformats/reg-tilegx32.dat: New.
gdbserver/
* Makefile.in (clean): Remove reg-tilegx.c, reg-tilegx32.c.
(reg-tilegx32.c): New rule.
* configure.srv (tilegx-*-linux*): Add reg-tilegx32.o to srv_regobj.
* linux-tile-low.c (tile_arch_setup): New function. Invoke
different register info initializer according to elf class.
(init_registers_tilgx32): New function. The tilegx32 register info
initializer.
(tile_fill_gregset): Use "uint_reg_t" to represent register size.
(tile_store_gregset): Likewise.
Addresses, as most numbers in the RSP are hex encoded, with variable
length (that just means the width isn't specified, and there's no top
cap. So they should be extracted with unpack_varlen_hex.
A couple spots in server.c are using strto(u)l, which doesn't work on
LLP64 targets.
This patch fixes it.
Tested on x86_64 Fedora 17.
2013-02-19 Pedro Alves <palves@redhat.com>
Kai Tietz <ktietz@redhat.com>
PR gdb/15161
* server.c (handle_query) <CRC check>: Use unpack_varlen_hex
instead of strtoul to extract address from packet.
(process_serial_event) <'z'>: Likewise.
The previous notes aren't being released before setting new ones.
Tested on x86_64 Fedora 17.
gdb/gdbserver/
2013-02-14 Pedro Alves <palves@redhat.com>
Plug memory leak.
* tracepoint.c (cmd_qtnotes): Free TRACING_USER_NAME,
TRACING_NOTES and TRACING_STOP_NOTE before clobbering.
An obvious use case for savestring.
Tested on x86_64 Fedora 17.
2013-02-14 Pedro Alves <palves@redhat.com>
* tracepoint.c (cmd_qtdpsrc): Use savestring.
This makes gdbserver share gdb's savestring, instead of baking its own.
Tested on x86_64 Fedora 17.
gdb/
2013-02-14 Pedro Alves <palves@redhat.com>
* utils.c (savestring): Don't #undef it. Move function to
common/common-utils.c.
* common/common-utils.c: Include gdb_string.h.
(savestring): Move here from utils.c.
* common/common-utils.h (savestring): Declare.
gdb/gdbserver/
2013-02-14 Pedro Alves <palves@redhat.com>
* tracepoint.c (save_string): Delete.
(add_tracepoint_action): Use savestring instead of save_string.
null ptr check to prevent gdbserver from crashing
Evaluating a thread local storage variable in a remote scenario crashes
gdbserver if libthread-db could not be loaded.
2013-02-12 Sanimir Agovic <sanimir.agovic@intel.com>
gdbserver/
* thread-db.c (thread_db_get_tls_address):
NULL pointer check thread_db.
testsuite/
* gdb.server/no-thread-db.exp: New file.
* gdb.server/no-thread-db.c: New file.
* gdb.server/Makefile.in (EXECUTABLES): Add no-thread-db.
* linux-aarch64-low.c (aarch64_arch_setup): Clamp
aarch64_num_wp_regs and aarch64_num_bp_regs to
AARCH64_HWP_MAX_NUM and AARCH64_HBP_MAX_NUM respectively.
... following Pedro's advice of using a temporary macro.
gdb/gdbserver/ChangeLog:
* lynx-low.c (ptrace_request_to_str): Define a temporary
macro and use it to simplify this function's implementation.
This is not strictly needed, since both GDB and GDBserver seem
to agree on the register numbering without this. But this allows
us to make sure that this is always going to be the case.
gdb/gdbserver/ChangeLog:
* configure.srv (i[34567]86-*-lynxos*): Set srv_xmlfiles.
... back to GDB. The transfer occurs when GDB sends the
'qXfer:features:read:target.xml' packet. This allows us to make
sure that GDB and GDBserver use the same register numbering.
This is important on Lynx 178, where GDB selects the rs6000:6000
architecture by default instead of the powerpc:common architecture.
gdb/gdbserver/ChangeLog:
* configure.srv (powerpc-*-lynxos*): Set srv_xmlfiles.
Before this patch, the ptid passed to lynx_resume was completely
ignored, and we used the current_inferior. This resulted in trying
to resume the inferior execution using the wrong ptid after having
received a thread create/exit event, because the inferior_ptid
was still set to the ptid prior to receiving the signal.
gdb/gdbserver/ChangeLog:
* lynx-low.c (lynx_resume): Use the resume_info parameter
to determine the ptid for the lynx_ptrace call, unless
it is equal to minus_one_ptid, in which case we use the
ptid of the current_inferior.
(lynx_wait_1): After having received a thread create/exit
event, resume the inferior's execution using the signaling
thread's ptid, rather than the old ptid.
We use this ptrace request when handling SIGTRAP signals,
and without this change, the debug trances show:
PTRACE (<unknown-request>, ...
This patch fixes this.
gdb/gdbserver/ChangeLog:
* lynx-low.c (ptrace_request_to_str): Add handling for
PTRACE_GETTRACESIG.
LynxOS 178 does not define this macro.
gdb/gdbserver/ChangeLog:
* lynx-low.c (ptrace_request_to_str): Do not handle
PTRACE_GETTHREADLIST if this macro does not exist.
2012-11-26 Maxime Villard <rustyBSD@gmx.fr>
Pedro Alves <palves@redhat.com>
* common/linux-osdata.c (linux_xfer_osdata_fds): Decrease buffer
size parameter passed to readlink by one byte.
* fbsd-nat.c (fbsd_pid_to_exec_file): Ditto.
* linux-nat.c (linux_child_pid_to_exec_file): Ditto.
* nbsd-nat.c (nbsd_pid_to_exec_file): Ditto.
* inf-child.c (inf_child_fileio_readlink): Decrease local buffer's
size by one byte.
gdb/gdbserver/
2012-11-26 Maxime Villard <rustyBSD@gmx.fr>
* hostio.c (handle_readlink): Decrease buffer size
parameter passed to readlink by one byte.
ARI fixes: move gdb_wait and gdb_stat headers to common subdirectory.
* gdb_stat.h: Delete. Moved to common directory.
* common/gdb_stat.h: New file.
* gdb_wait.h: Delete. Moved to common directory.
* common/gdb_wait.h: New file.
* Makefile.in (H_FILES_NO_SRC): Adapt to new header
location.
* contrib/ari/gdb_ari.sh (wait.h rule): Adapt to new gdb_wait.h
location.
(stat.h rule): Adapt to new gdb_stat.h location.
* common/linux-osdata.c: Include "gdb_stat.h" header instead of
<sys/stat.h> header.
* common/linux-ptrace.c: Include "gdb_wait.h" header instead of
<sys/wait.h> header.
gdbserver ChangeLog entry:
2012-11-15 Pierre Muller <muller@sourceware.org>
* configure.ac (AC_CHECK_HEADERS): Add wait.h header.
* config.in: Regenerate.
* configure: Regenerate.
* linux-low.c: Use "gdb_stat.h" header instead of <sys/stat.h> header.
Use "gdb_wait.h" header instead of <sys/wait.h> header.
* lynx-low.c: Use "gdb_wait.h" header instead of <sys/wait.h> header.
* remote-utils.c: Use "gdb_stat.h" header instead of <sys/stat.h>
header.
* server.c: Remove HAVE_WAIT_H conditional. Use "gdb_wait.h" header
instead of <sys/wait.h> header.
* spu-low.c: Use "gdb_wait.h" header instead of <sys/wait.h> header.
gdb/ChangeLog
* target.c (simple_search_memory): Include access length in
warning message.
gdb/gdbserver/ChangeLog
* server.c (handle_search_memory_1): Include access length in
warning message.
gdb/testsuite/ChangeLog
Test find command on unmapped memory.
* gdb.base/find-unmapped.c: New file.
* gdb.base/find-unmapped.exp: New file.
* common/gdb_string.h: ... here.
* common/vec.h: Remove #ifndef GDBSERVER conditional inclusion of
gdb_string.h and gdb_assert.h.
gdbserver/
* configure.ac: Add check for strstr.
* config.in: Regenerate.
* configure: Regenerate.
* linux-thread-db.c: #include "gdb_vecs.h".
(try_thread_db_load_from_pdir_1): New arg "subdir". All callers
updated.
(try_thread_db_load_from_pdir): New arg "subdir". All callers updated.
(thread_db_load_search): Use a vector to iterate over path elements.
Handle text appearing after "$pdir".
gdbserver/
* Makefile.in (SFILES): Add gdb_vecs.c.
(OBS): Add gdb_vecs.o.
(gdb_vecs_h, host_defs_h): New variables.
(thread-db.o): Add $(gdb_vecs_h) dependency.
(gdb_vecs.o): New rule.
* thread-db.c: #include "gdb_vecs.h".
(thread_db_load_search): Use a vector to iterate over path elements.
Handle text appearing after "$pdir".
* inf-child.c (inf_child_fileio_pwrite): If pwrite fails, fall back
to attempting lseek/write.
(inf_child_fileio_pread): Likewise for pread.
gdbserver/ChangeLog:
* hostio.c (handle_pread): If pread fails, fall back to attempting
lseek/read.
(handle_pwrite): Likewise for pwrite.
* linux-arm-low.c (arm_linux_hw_point_initialize): Distinguish
between unsupported TYPE and unimplementable ADDR/LEN combination.
(arm_insert_point): Act on new return value.
testsuite/ChangeLog:
* gdb.base/watchpoint.exp (test_wide_location_1): Expect software
watchpoints on ARM. When expecting software watchpoints, tolerate
(remote) targets that report unsupported hardware watchpoint only
at continue time.
(test_wide_location_2): Likewise.
* server.c (process_point_options): Only skip tokens if we find
one that is unrecognized. Don't treat 'X' specially while
skipping unrecognized tokens.
* arm-linux-nat.c (arm_linux_hw_breakpoint_initialize): Do not
attempt to 4-byte-align HW breakpoint addresses for Thumb.
gdbserver/ChangeLog:
* linux-arm-low.c (arm_linux_hw_point_initialize): Do not attempt
to 4-byte-align HW breakpoint addresses for Thumb.
* solib-svr4.c (svr4_current_sos): New comment on
svr4_current_sos_via_xfer_libraries fall back.
gdb/gdbserver/
* linux-low.c (linux_qxfer_libraries_svr4): Return -1 if R_DEBUG is -1.
gdb/testsuite/
* gdb.server/solib-list-lib.c: New file.
* gdb.server/solib-list-main.c: New file.
* gdb.server/solib-list.exp: New file.
* linux-low (__UCLIBC__ && !(__UCLIBC_HAS_MMU__ || __ARCH_HAS_MMU__)):
Include asm/ptrace.h.
(PT_TEXT_ADDR, PT_DATA_ADDR, PT_TEXT_END_ADDR): Define only if not
already defined.
Pedro Alves <palves@redhat.com>
* linux-low.c (enum stopping_threads_kind): New.
(stopping_threads): Change type to `enum stopping_threads_kind'.
(handle_extended_wait): If stopping and suspending threads, leave
the new_lwp suspended too.
(linux_wait_for_event): Adjust.
(stop_all_lwps): Set `stopping_threads' to
STOPPING_AND_SUSPENDING_THREADS or STOPPING_THREADS depending on
whether we're suspending threads or just stopping them. Assert no
recursion happens.
(PTRACE_ARG4_TYPE): Likewise.
(PTRACE_XFER_TYPE): Likewise.
* linux-arm-low.c (arm_prepare_to_resume): Cast third argument of
ptrace to PTRACE_ARG3_TYPE.
* linux-low.c (PTRACE_ARG3_TYPE): Move macro to linux-low.h.
(PTRACE_ARG4_TYPE): Likewise.
(PTRACE_XFER_TYPE): Likewise.
(linux_detach_one_lwp): Cast fourth argument of
ptrace to long then PTRACE_ARG4_TYPE.
(regsets_fetch_inferior_registers): Cast third argument of
ptrace to long then PTRACE_ARG3_TYPE.
(regsets_store_inferior_registers): Likewise.
PR gdb/13969
* linux-low.c (linux_pid_exe_is_elf_64_file): Also return the
e_machine field.
(linux_qxfer_libraries_svr4): Update call to elf_64_file_p.
* linux-low.h (linux_pid_exe_is_elf_64_file): Updated.
* linux-x86-low.c (x86_arch_setup): Check if GDBserver is
compatible with process.
Jan Kratochvil <jan.kratochvil@redhat.com>
* server.c (cont_thread, general_thread): Add describing comments.
(start_inferior): Clear `cont_thread'.
(handle_v_cont): Don't set `cont_thread' if resuming all threads
of a process.
* common/linux-procfs.c (linux_proc_get_int): New, from
linux_proc_get_tgid, change its LWPID type to pid_t, add parameter
field.
(linux_proc_get_tgid): Only call linux_proc_get_int.
(linux_proc_get_tracerpid): New.
(linux_proc_pid_has_state): New, from linux_proc_pid_is_zombie.
(linux_proc_pid_is_stopped, linux_proc_pid_is_zombie): Only call
linux_proc_pid_has_state.
* common/linux-procfs.h (linux_proc_get_tracerpid): New declaration.
* common/linux-ptrace.c: Include linux-procfs.h and buffer.h.
(linux_ptrace_attach_warnings): New.
* common/linux-ptrace.h (struct buffer, linux_ptrace_attach_warnings):
New declaration.
* linux-nat.c: Include exceptions.h, linux-ptrace.h and buffer.h.
(linux_nat_attach): New variables ex, buffer, message and message_s.
Wrap to_attach by TRY_CATCH and call linux_ptrace_attach_warnings.
gdb/gdbserver/
* linux-low.c (linux_attach_lwp_1): New variable buffer. Call
linux_ptrace_attach_warnings.
gdb/testsuite/
* gdb.base/attach-twice.c: New files.
* gdb.base/attach-twice.exp: New files.
* inferiors.c (add_pid_to_list, pull_pid_from_list): Delete.
* linux-low.c (struct simple_pid_list): New.
(stopped_pids): New a struct simple_pid_list pointer.
(add_to_pid_list, pull_pid_from_list): New.
(handle_extended_wait): Don't assume the first signal new children
report is SIGSTOP. Adjust call to pull_pid_from_list.
(linux_wait_for_lwp): Adjust.
2012-02-29 Yao Qi <yao@codesourcery.com>
Pedro Alves <palves@redhat.com>
* linux-low.c (linux_wait_1): Call unsuspend_all_lwps when
`step_over_finished' is true.
gdb/testsuite:
2012-02-29 Yao Qi <yao@codesourcery.com>
Pedro Alves <palves@redhat.com>
* gdb.trace/trace-mt.c: New
* gdb.trace/trace-mt.exp: New.
gdb/gdbserver/
* linux-low.c (pid_is_stopped): Delete, moved to common/.
(linux_attach_lwp_1): Adjust to use linux_proc_pid_is_stopped.
gdb/
* linux-nat.c (pid_is_stopped): Delete, moved to common/.
(linux_nat_post_attach_wait): Adjust to use
linux_proc_pid_is_stopped.
* common/linux-procfs.h (linux_proc_pid_is_stopped): Declare.
* common/linux-procfs.c (linux_proc_pid_is_stopped): New function,
based on pid_is_stopped from both linux-nat.c and
gdbserver/linux-low.c, and renamed.
* server.c (handle_query): Advertise support for target-side
breakpoint condition evaluation.
(process_point_options): New function.
(process_serial_event): When inserting a breakpoint, check for
a target-side condition that should be evaluated.
* mem-break.c: Include regcache.h and ax.h.
(point_cond_list_t): New data structure.
(breakpoint) <cond_list>: New field.
(find_gdb_breakpoint_at): Make non-static.
(delete_gdb_breakpoint_at): Clear any target-side
conditions.
(clear_gdb_breakpoint_conditions): New function.
(add_condition_to_breakpoint): Likewise.
(add_breakpoint_condition): Likewise.
(gdb_condition_true_at_breakpoint): Likewise.
(gdb_breakpoint_here): Return result directly instead
of going through a local variable.
* mem-break.h (find_gdb_breakpoint_at): New prototype.
(clear_gdb_breakpoint_conditions): Likewise.
(add_breakpoint_condition): Likewise.
(gdb_condition_true_at_breakpoint): Likewise.
* linux-low.c (linux_wait_1): Evaluate target-side breakpoint condition.
(need_step_over_p): Take target-side breakpoint condition into
consideration.
This reproduces on the GDBserver side what GDB does when readlink is
not supported.
gdb/gdbserver/ChangeLog:
* configure.ac: Add readlink to AC_CHECK_FUNCS list.
* configure, config.in: Regenerate.
* hostio.c: Provide an alternate implementation if HAVE_READLINK
is not defined.
Try SIGKILL first, then PTRACE_KILL.
* linux-low.c (linux_kill_one_lwp): New.
(linux_kill_one_lwp): Rename to ...
(kill_one_lwp_callback): ... this. Use the new
linux_kill_one_lwp.
2012-02-02 Pedro Alves <palves@redhat.com>
* tracepoint.c (cmd_qtminftpilen): Return 0 if there's no current
inferior.
gdb/
2012-02-02 Pedro Alves <palves@redhat.com>
* remote.c (remote_get_min_fast_tracepoint_insn_len): Return 0 if
the current inferior has no execution. Make sure the current
remote process matches gdb's current inferior.
* linux-low.c (linux_wait_for_event_1): Rename to ...
(linux_wait_for_event): ... here and merge it with former
linux_wait_for_event - new variable wait_ptid, use it.
(linux_wait_for_event): Remove - merge it to linux_wait_for_event_1.
Ulrich Weigand <ulrich.weigand@linaro.org>
ChangeLog:
* remote.c (remote_multi_process_p): Only check for multi-process
protocol feature, do not check for extended protocol.
(remote_supports_multi_process): Check for extended protocol here.
(set_general_process): Likewise.
(extended_remote_kill): Likewise.
(remote_pid_to_str): Likewise.
(remote_query_supported): Always query multiprocess mode.
gdbserver/ChangeLog:
* server.c (handle_v_requests): Only support vAttach and vRun to
start multiple processes when in extended protocol mode.
* linux-low.c (linux_create_inferior): Put empty if clause for write.
Revert:
2011-12-18 Hui Zhu <teawater@gmail.com>
* linux-low.c (linux_create_inferior): Save return value to ret.
redirect stdin from /dev/null, stdout to stderr.
* remote-utils.c (remote_is_stdio): New static global.
(remote_connection_is_stdio): New function.
(remote_prepare): Handle stdio connection.
(remote_open): Ditto.
(remote_close): Don't close stdin for stdio connections.
(read_prim,write_prim): New functions. Replace all calls to
read/write to these.
* server.c (main): Watch for "-" argument. Move call to
remote_prepare before start_inferior.
* server.h (STDIO_CONNECTION_NAME): New macro.
(remote_connection_is_stdio): Declare.
PR remote/13492
* i386-low.c (i386_low_stopped_data_address): Avoid fetching
DR_CONTROL unless necessary. Extend comments.
* linux-x86-low.c (x86_linux_prepare_to_resume): Don't write to
DR0-3 if not used. If any watchpoint was set, clear DR_STATUS.
Fix overlapping memcpy.
* mem-break.c (set_raw_breakpoint_at): New variable buf. Use it for
the read_inferior_memory transfer.
(delete_fast_tracepoint_jump): New variable buf. Use it for the
write_inferior_memory transfer.
(set_fast_tracepoint_jump): New variable buf. Use it for the
read_inferior_memory and write_inferior_memory transfers.
(uninsert_fast_tracepoint_jumps_at, reinsert_fast_tracepoint_jumps_at)
(delete_raw_breakpoint, uninsert_raw_breakpoint): New variable buf.
Use it for the write_inferior_memory transfer.
(check_mem_read, check_mem_write): New gdb_asserts for overlapping
buffers.
* s390-nat.c (SUBOFF): Remove.
(s390_native_supply, s390_native_collect): New functions.
(supply_gregset, supply_fpregset): Use s390_native_supply.
(fill_gregset, fill_fpregset): Use s390_native_collect.
* s390-tdep.c (s390_pseudo_register_reggroup_p): Update comment.
(s390_unwind_pseudo_register): New function.
(s390_prologue_frame_unwind_cache): Unwind PSW address and mask
registers instead of PC and CC.
(s390_backchain_frame_unwind_cache): Likewise.
(s390_sigtramp_frame_unwind_cache): Do not unwind PC, CC, or
full GPR pseudos.
(s390_trad_frame_prev_register): New function.
(s390_frame_prev_register): Use it.
(s390_sigtramp_frame_prev_register): Likewise.
(s390_dwarf2_prev_register): Use s390_unwind_pseudo_register.
(s390_dwarf2_frame_init_reg): Unwind PSW address and mask. Use
special callback to unwind any pseudo.
* features/s390-core32.xml: Add pswm/pswa to save/restore group.
* features/s390-core64.xml: Likewise.
* features/s390x-core64.xml: Likewise.
* features/s390-linux32.c: Regenerate.
* features/s390-linux64.c: Likewise.
* features/s390x-linux64.c: Likewise.
gdbserver/ChangeLog:
* linux-s390-low.c (s390_collect_ptrace_register): Fully convert
PSW address/mask between 8-byte and 16-byte formats.
(s390_supply_ptrace_register): Likewise.
(s390_get_pc, s390_set_pc): 4-byte PSW address always includes
basic addressing mode bit.
* breakpoint.h (struct tracepoint): New field traceframe_usage.
* breakpoint.c (print_one_breakpoint_location): Identify
tracepoints as such when reporting hit counts, report
trace buffer usage.
(create_tracepoint_from_upload): Copy status info.
* tracepoint.h (struct trace_status): Rename error_desc to stop_desc,
add fields user_name, notes, start_time, stop_time.
(struct uploaded_tp): Add fields hit_count, traceframe_usage.
* tracepoint.c (trace_user): New global.
(trace_notes): New global.
(trace_stop_notes): New global.
(start_tracing): Add argument and trace note handling.
(stop_tracing): Ditto.
(trace_start_command): Add notes argument.
(trace_stop_command): Ditto.
(trace_status_command): Report additional status info.
(trace_status_mi): Similarly.
(trace_save): Update, record tracepoint status.
(set_disconnected_tracing): Call target method directly.
(send_disconnected_tracing_value): Remove.
(set_trace_user): New function.
(set_trace_notes): New function.
(set_trace_stop_notes): New function.
(parse_trace_status): Handle additional status.
(parse_tracepoint_status): New function.
(parse_tracepoint_definition): Call it.
(tfile_get_tracepoint_status): New function.
(init_tfile_ops): Use it.
(_initialize_tracepoint): Add new setshows.
* target.h (struct target_ops): New methods to_get_tracepoint_status
and to_set_trace_notes.
(target_get_tracepoint_status): New macro.
(target_set_trace_notes): New macro.
* target.c (update_current_target): Add new methods.
* remote.c (remote_get_tracepoint_status): New function.
(remote_set_trace_notes): New function.
(init_remote_ops): Add them.
* mi/mi-main.c (mi_cmd_trace_start): Add argument to call.
(mi_cmd_trace_stop): Ditto.
* tracepoint.c (struct tracepoint): New field traceframe_usage.
(tracing_start_time): New global.
(tracing_stop_time): New global.
(tracing_user_name): New global.
(tracing_notes): New global.
(tracing_stop_note): New global.
(cmd_qtstart): Set traceframe_usage, start_time.
(stop_tracing): Set stop_time.
(cmd_qtstatus): Report additional status.
(cmd_qtp): New function.
(handle_tracepoint_query): Call it.
(cmd_qtnotes): New function.
(handle_tracepoint_general_set): Call it.
(get_timestamp): Rename from tsv_get_timestamp.
* gdb.texinfo (Starting and Stopping Trace Experiments): Document
note-related options and variables.
(Tracepoint Packets): Document packet changes.
* gdb.trace/tstatus.exp: New.
* gdb.trace/actions.c: Include string.h.
Kwok Cheung Yeung <kcy@codesourcery.com>
* NEWS: Document shorter fast tracepoints and qTMinFTPILen packet.
* i386-tdep.c (i386_fast_tracepoint_valid_at): Query target for
the minimum instruction size for fast tracepoints.
* target.h (struct target_ops): Add new method
to_get_min_fast_tracepoint_insn_len.
(target_get_min_fast_tracepoint_insn_len): New.
* target.c (update_current_target): Set up new target operation.
* remote.c (remote_write_bytes_aux): Fix typo.
(remote_get_min_fast_tracepoint_insn_len): New.
(init_remote_ops): Initialize new field.
* gdb.texinfo (Create and Delete Tracepoints): Describe what is
needed to get shorter fast tracepoints.
(Tracepoint Packets): Document new qTMinFTPILen packet.
* linux-x86-low.c (small_jump_insn): New.
(i386_install_fast_tracepoint_jump_pad): Add arguments for
trampoline and error message, build a trampoline and issue a small
jump instruction to it.
(x86_install_fast_tracepoint_jump_pad): Add arguments for
trampoline and error message.
(x86_get_min_fast_tracepoint_insn_len): New.
(the_low_target): Add call to x86_get_min_fast_tracepoint_insn_len.
* linux-low.h (struct linux_target_ops): Add arguments to
install_fast_tracepoint_jump_pad operation, add new operation.
* linux-low.c (linux_install_fast_tracepoint_jump_pad): Add
arguments.
(linux_get_min_fast_tracepoint_insn_len): New function.
(linux_target_op): Add new operation.
* tracepoint.c (gdb_trampoline_buffer): New IPA variable.
(gdb_trampoline_buffer_end): Ditto.
(gdb_trampoline_buffer_error): Ditto.
(struct ipa_sym_addresses): Add fields for new IPA variables.
(symbol_list): Add entries for new IPA variables.
(struct tracepoint): Add fields to hold the address range of the
trampoline used by the tracepoint.
(trampoline_buffer_head): New static variable.
(trampoline_buffer_tail): Ditto.
(claim_trampoline_space): New function.
(have_fast_tracepoint_trampoline_buffer): New function.
(clone_fast_tracepoint): Fill in trampoline fields of tracepoint
structure.
(install_fast_tracepoint): Ditto, also add error buffer argument.
(cmd_qtminftpilen): New function.
(handle_tracepoint_query): Add response to qTMinFTPILen packet.
(fast_tracepoint_from_trampoline_address): New function.
(fast_tracepoint_collecting): Handle trampoline as part of jump
pad space.
(set_trampoline_buffer_space): New function.
(initialize_tracepoint): Initialize new IPA variables.
* target.h (struct target_ops): Add arguments to
install_fast_tracepoint_jump_pad operation, add new
get_min_fast_tracepoint_insn_len operation.
(target_get_min_fast_tracepoint_insn_len): New.
(install_fast_tracepoint_jump_pad): Add arguments.
* server.h (IPA_BUFSIZ): Define.
* linux-i386-ipa.c: Include extra header files.
(initialize_fast_tracepoint_trampoline_buffer): New function.
(initialize_low_tracepoint): Call it.
* server.h (set_trampoline_buffer_space): Declare.
(claim_trampoline_space): Ditto.
(have_fast_tracepoint_trampoline_buffer): Ditto.
* gdb.trace/ftrace.c: New.
* gdb.trace/ftrace.exp: New.
Watchpoint support doesn't work anymore when using gdbserver on Windows.
They just never trigger.
The problem comes from the fact that we always set the debug registers
to zero, no matter what. This in turn comes from the fact that we
use i386_low_insert_watchpoint to compute the DR values:
return i386_low_insert_watchpoint (&debug_reg_state,
type, addr, len);
This function saves the new values in debug_reg_state. However,
the values we actually use when setting the DR registers are
taken from two different globals:
static unsigned dr_status_mirror;
static unsigned dr_control_mirror;
These are really never actually changed (their value is set from
the DR values read from the inferior, but since we never change
them, in practice, they never change).
The fix is to use the values provided by debug_reg_state, and
to eliminate the two dr_[...] globals.
gdb/gdbserver/ChangeLog:
* win32-i386-low.c (dr_status_mirror, dr_control_mirror): Delete.
(i386_dr_low_get_control, i386_dr_low_get_status): Use
dr_status_mirror and dr_control_mirror from debug_reg_state.
(i386_dr_low_get_status): Use debug_reg_state.dr_status_mirror
(i386_initial_stuff): Remove use of deleted globals.
(i386_get_thread_context, i386_set_thread_context,
i386_thread_added): Use dr_status_mirror and dr_control_mirror
from debug_reg_state.
2011-11-05 Yao Qi <yao@codesourcery.com>
* tracepoint.c (gdb_collect): Loop over tracepoints of same
address as TPOINT's.
gdb/testsuite:
2011-11-05 Yao Qi <yao@codesourcery.com>
* gdb.trace/trace-break.exp: Add test on setting two
fast tracepoints at the same address.
* infrun.c (disable_randomization): New global variable.
(show_disable_randomization): New function.
(set_disable_randomization): Likewise.
(_initialize_infrun): Install set/show disable-randomization
commands.
* linux-nat.c (disable_randomization): Remove.
(show_disable_randomization): Likewise.
(set_disable_randomization): Likewise.
(_initialize_linux_nat): No longer install set/show
disable-randomization commands here.
(linux_nat_supports_disable_randomization): New function.
(linux_nat_add_target): Install it.
* remote.c (PACKET_QDisableRandomization): New enum value.
(remote_protocol_packets): Support QDisableRandomization.
(_initialize_remote): Likewise.
(remote_supports_disable_randomization): New function.
(init_remote_ops): Install it.
(extended_remote_supports_disable_randomization): New function.
(init_extended_remote_ops): Install it.
(extended_remote_disable_randomization): New function.
(extended_remote_create_inferior_1): Call it.
* target.h (struct target_ops): Add to_supports_disable_randomization.
(target_supports_disable_randomization): Add prototype.
* target.c (target_supports_disable_randomization): New function.
(find_default_supports_disable_randomization): Likewise.
(init_dummy_target): Install it.
doc/
* gdb.texinfo (Starting your Program): "set disable-randomization"
is no longer Linux-specific.
(Remote Configuration): Document "set remote
disable-randomization-packet".
(General Query Packets): Document "QDisableRandomization" packet
and add it to "qSupported" list.
gdbserver/
* configure.ac: Check support for personality routine.
* configure: Regenerate.
* config.in: Likewise.
* linux-low.c: Include <sys/personality.h>.
Define ADDR_NO_RANDOMIZE if necessary.
(linux_create_inferior): Disable address space randomization when
forking inferior, if requested.
(linux_supports_disable_randomization): New function.
(linux_target_ops): Install it.
* server.h (disable_randomization): Declare.
* server.c (disable_randomization): New global variable.
(handle_general_set): Handle QDisableRandomization.
(handle_query): Likewise for qSupported.
(main): Support --disable-randomization and --no-disable-randomization
command line arguments.
* target.h (struct target_ops): Add supports_disable_randomization.
(target_supports_disable_randomization): New macro.
The DSBT support is very close to the FDPIC code, so extend the existing
loadmap support to work with FDPIC loadmaps too.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
(arm_linux_hwbp_cap): New static variable.
(arm_linux_get_hwbp_cap): Replace by ...
(arm_linux_init_hwbp_cap): ... this new function.
(arm_linux_get_hw_breakpoint_count): Use arm_linux_hwbp_cap.
(arm_linux_get_hw_watchpoint_count): Likewise.
(arm_linux_get_hw_watchpoint_max_length): Likewise.
(arm_arch_setup): Call arm_linux_init_hwbp_cap.
(arm_prepare_to_resume): Use perror_with_name instead of error.
* tracepoint.c (gdb_agent_op_sizes): New table.
(emit_eq_goto): New function.
(emit_ne_goto): New function.
(emit_lt_goto): New function.
(emit_le_goto): New function.
(emit_gt_goto): New function.
(emit_ge_goto): New function.
(is_goto_target): New function.
(compile_bytecodes): Recognize special cases of compare-goto
combinations and call specialized emitters for them.
* linux-x86-low.c (amd64_emit_eq_goto): New function.
(amd64_emit_ne_goto): New function.
(amd64_emit_lt_goto): New function.
(amd64_emit_le_goto): New function.
(amd64_emit_gt_goto): New function.
(amd64_emit_ge_goto): New function.
(amd64_emit_ops): Add the new functions.
(i386_emit_eq_goto): New function.
(i386_emit_ne_goto): New function.
(i386_emit_lt_goto): New function.
(i386_emit_le_goto): New function.
(i386_emit_gt_goto): New function.
(i386_emit_ge_goto): New function.
(i386_emit_ops): Add the new functions.
gdb/testsuite/
* gdb.arch/i386-dr3-watch.exp: Test that the i386 watchpoints
backend doesn't leave used debug registers behind.
gdb/gdbserver/
* i386-low.c (i386_insert_aligned_watchpoint): Don't pass the info
to the inferior here.
(i386_remove_aligned_watchpoint): Ditto.
(i386_handle_nonaligned_watchpoint): Return immediate on fail to
fit part of the watchpoint in the debug registers.
(i386_update_inferior_debug_regs): New.
(i386_low_insert_watchpoint): Work on a local mirror of the debug
registers, and only update the inferior on success.
(i386_low_remove_watchpoint): Ditto.
gdb/
* i386-nat.c (I386_DR_VACANT, I386_DR_LOCAL_ENABLE)
(I386_DR_GLOBAL_ENABLE, I386_DR_DISABLE, I386_DR_SET_RW_LEN)
(I386_DR_GET_RW_LEN, I386_DR_WATCH_HIT): Add state parameter and
adjust.
(dr_mirror, dr_status_mirror, dr_control_mirror): Delete.
(struct i386_debug_reg_state): New.
(i386_init_dregs): New.
(dr_mirror): New.
(i386_cleanup_dregs): Use i386_init_dregs.
(i386_show_dr): Add state parameter and adjust.
(i386_insert_aligned_watchpoint): Ditto. Don't pass the info to
the inferior here.
(i386_remove_aligned_watchpoint): Likewise.
(i386_handle_nonaligned_watchpoint): Add state parameter and adjust.
(i386_update_inferior_debug_regs): New.
(i386_insert_watchpoint): Work on a local mirror of the debug
registers, and only update the inferior on success.
(i386_remove_watchpoint): Ditto.
(i386_region_ok_for_watchpoint): Adjust.
(i386_stopped_data_address): Adjust.
(i386_insert_hw_breakpoint): Adjust.
(i386_remove_hw_breakpoint): Adjust.
gdb/gdbserver/
* linux-x86-low.c (i386_dr_low_get_addr): Fix off by one in
assertion.
* win32-i386-low.c (i386_dr_low_get_addr): Ditto.
gdb/testsuite/
* gdb.arch/i386-dr3-watch.c: New file.
* gdb.arch/i386-dr3-watch.exp: New file.
* NEWS: Mention $sdir,$pdir.
* gdb_thread_db.h (LIBTHREAD_DB_SEARCH_PATH): Add $sdir:$pdir.
* linux-thread-db.c (try_thread_db_load_from_pdir): New function.
(try_thread_db_load_from_sdir): New function.
(try_thread_db_load_from_dir): New function.
(thread_db_load_search): Handle $pdir, $sdir. Remove trying of
system directories if search of libthread-db-search-path fails,
that is now done via $sdir.
(has_libpthread): New function.
(thread_db_load): Remove search for libthread_db in directory of
libpthread, that is now done via $pdir.
gdbserver/
* thread-db.c (try_thread_db_load_from_sdir): New function.
(try_thread_db_load_from_dir): New function.
(thread_db_load_search): Handle $sdir, ignore $pdir.
Remove trying of system directories if search of
libthread-db-search-path fails, that is now done via $sdir.
doc/
* gdb.texinfo (Threads): Document $sdir,$pdir.
(Server): Document $pdir exception.
experiment is still running.
gdb/
* breakpoint.c (disable_breakpoint): Disable all locations
associated with a tracepoint on target if a trace experiment is
running.
(disable_command): Disable a specific tracepoint location on target if
a trace experiment is running.
(do_enable_breakpoint): Enable all locations associated with a
tracepoint on target if a trace experiment is running.
(enable_command) Enable a specific tracepoint location on target if a
trace experiment is running.
* target.c (update_current_target): Add INHERIT and de_fault clauses for
to_supports_enable_disable_tracepoint, to_enable_tracepoint and
to_disable_tracepoint.
* target.h: Add declaration of struct bp_location.
(struct target_ops): Add new functions
to_supports_enable_disable_tracepoint, to_enable_tracepoint and
to_disable_tracepoint to target operations.
(target_supports_enable_disable_tracepoint): New macro.
(target_enable_tracepoint): New macro.
(target_disable_tracepoint): New macro.
* remote.c (struct remote_state): Add new field.
(remote_enable_disable_tracepoint_feature): New.
(remote_protocol_features): Add new entry.
(remote_supports_enable_disable_tracepoint): New.
(remote_enable_tracepoint): New.
(remote_disable_tracepoint): New.
(init_remote_ops): Add remote_enable_tracepoint,
remote_disable_tracepoint and remote_supports_enable_disable_tracepoint
to remote operations.
* tracepoint.c (start_tracing): Allow tracing to start without any
tracepoints enabled with just a warning if they can be re-enabled
later.
* NEWS: Add news item for the new behaviour of the enable and disable
GDB commands when applied to tracepoints.
Add news items for the new remote packets QTEnable and QTDisable.
gdb/doc/
* gdb.texinfo: Document change in the behaviour of the enable and
disable GDB commands when applied to tracepoints.
Document the EnableDisableTracepoints remote stub feature.
Document QTEnable and QTDisable in the list of tracepoint packets.
gdb/gdbserver/
* server.c (handle_query): Add EnableDisableTracepoints to the list
of supported features.
* tracepoint.c (clear_installed_tracepoints): Uninstall disabled
tracepoints.
(cmd_qtenable_disable): New.
(cmd_qtstart): Install tracepoints even if disabled.
(handle_tracepoint_general_set): Add call to cmd_qtenable_disable on
receiving a QTEnable or QTDisable packet.
(gdb_collect): Skip data collection if fast tracepoint is disabled.
(ust_marker_to_static_tracepoint): Do not ignore disabled static
tracepoints.
(gdb_probe): Skip data collection if static tracepoint is disabled.
(_initialize_thread_db): Add setter for libthread-db-search-path.
gdbserver/
* thread-db.c (thread_db_handle_monitor_command): Handle elided path.
doc/
* gdb.texinfo (Threads): If an empty path is provided for
libthread-db-search-path it is reset to its default value.
(Server): Ditto.
* linux-nat.c: Move common macros to ...
Include linux-ptrace.h.
* common/linux-ptrace.h: ... here. New.
gdb/gdbserver/
* linux-low.c: Move common macros to linux-ptrace.h.
Include linux-ptrace.h.
* Makefile.in (linux_ptrace_h): New.
(linux-low.o): Depends on linux-ptrace.h.
* NEWS: Document the new gdbserver --once option.
gdb/doc/
* gdb.texinfo (Starting and Stopping Trace Experiments): New anchor
for disconnected tracing.
(Multi-Process Mode for @code{gdbserver}): Mention --multi and
extended-remote relationship. Mention --once.
(TCP port allocation lifecycle of @code{gdbserver}): New.
gdb/gdbserver/
* remote-utils.c (handle_accept_event): Close LISTEN_DESC only if
RUN_ONCE. Comment for the LISTEN_DESC delete_file_handler call.
(remote_prepare): New function with most of the TCP code from ...
(remote_open): ... here. Detect PORT here unconditionally. Move also
setting transport_is_reliable.
* server.c (run_once): New variable.
(gdbserver_usage): Document it.
(main): Set run_once for `--once'. Call remote_prepare. Exit after
the first run if RUN_ONCE.
* server.h (run_once, remote_prepare): New declarations.
gdb/testsuite/
* gdb.base/solib-disc.exp: Set gdbserver_reconnect_p.
* lib/gdb.exp (gdb_init): Clear gdbserver_reconnect_p.
* lib/gdbserver-support.exp (gdbserver_start): Add `--once' if
!gdbserver_reconnect_p..
(gdbserver_reconnect): Call error if !gdbserver_reconnect_p..
* win32-low.c (win32_create_inferior): Use new cygwin_path_list
function to avoid warning.
(win32_add_one_solib): Use cygwin_conv_path function to avoid
warning.
function call message.
(target_signal_to_host): Add _ markup and remove trailing new line
from warning call message.
(target_signal_from_command): Add _ markup to error function call
message.
* gdbserver/server.h (Macro _): Define it if not available.
2011-03-09 Yao Qi <yao@codesourcery.com>
Revert:
2011-02-11 Yao Qi <yao@codesourcery.com>
* common/Makefile.in: Add copyright header.
2011-02-11 Yao Qi <yao@codesourcery.com>
* Makefile.in: Remove signals.o from COMMON_OBS. Link
libcommon.a.
* configure.ac: Add common to sub dir.
* configure: Regenerate.
gdb/gdbserver/
2011-03-09 Yao Qi <yao@codesourcery.com>
Revert:
2011-03-04 Yao Qi <yao@codesourcery.com>
* Makefile.in: Remove GNU make feature --directory.
2011-03-05 Yao Qi <yao@codesourcery.com>
* Makefile.in (CLEANDIRS, REQUIRED_SUBDIRS): New variable.
(subdir_do): New make target. Copied from gdb/Makefile.
(maintainer-clean, realclean, distclean, clean): Call corresponding
make targets in common/Makefile.
2011-02-11 Yao Qi <yao@codesourcery.com>
* configure.ac: Call AC_PROG_RANLIB.
* Makefile.in: Remove signals.o from OBS. Link libcommon.a.
* configure: Regenerate.
This problem was noticed during the nightly snapshot build,
but can be reduced to:
% /path/to/gdb/gdbserver/configure
% make clean
The "make clean" fails, because it tries to do a "make clean"
in the common/ subdirectory. But the problem is that this
common/ subdirectory is NOT created during the configure phase,
but rather during the build phase. The error is fatal because
we had put the common subdirectory in the list of REQUIRED_SUBDIRS.
This fixes the problem by removing it from the REQUIRED_SUBDIRS
list.
gdb/gdbserver/ChangeLog:
* Makefile.in (REQUIRED_SUBDIRS): Remove $(LIBCOMMON_DIR).
011-03-05 Yao Qi <yao@codesourcery.com>
* Makefile.in (CLEANDIRS, REQUIRED_SUBDIRS): New variable.
(subdir_do): New make target. Copied from gdb/Makefile.
(maintainer-clean, realclean, distclean, clean): Call corresponding
make targets in common/Makefile.
