* elfcode.h (bfd_section_from_shdr): If section is SHT_PROGBITS,
and the name starts with .debug, .line or .stab, set
SEC_DEBUGGING.
* elf32-target.h (TARGET_BIG_SYM, TARGET_LITTLE_SYM): Added
SEC_DEBUGGING to section_flags.
* elf64-target.h (TARGET_BIG_SYM, TARGET_LITTLE_SYM): Added
SEC_DEBUGGING and SEC_CODE to section_flags.
* bfd-in2.h: Updated.
the pushing of the struct return address is already handled in
mips_push_arguments.
* mips-tdep.c (reinit_frame_cache_sfunc): Fix typo in prototype
declaration.
* mipsread.c (parse_symbol, parse_type, upgrade_type): Add more
sanity checks for corrupt symbol entries to avoid core dumps
reported by benson@odi.com. Obviously Ultrix 4.3A cc now has
the same problems as the OSF/1 alpha cc.
* mipsread.c (parse_lines): Iterate over the range of the compressed
line number entries, the old iteration sometimes failed to stop
and wrote past the end of the LINETABLE. Add sanity check to avoid
the same problem in case the line number info is corrupt.
* mipsread.c (parse_procedure): Adjust pdr for alpha __sigtramp.
* mipsread.c (parse_external, parse_partial_symbols): Ignore stNil
symbols that are produced for statics in .o files and stLocal symbols
that are produced for every section in OSF/1 dynamically linked
executables.
* mipsread.c (psymtab_to_symtab_1): Put out `undefined symbols'
warning only under `verbose on' as there are many undefined symbols
in a dynamically linked executable.
(copy_file): Don't copy EXEC_P specially here.
This permits strip to generate an executable file on UnixWare;
it still does not actually strip the debugging information.
sections with SEC_LOAD set, even if SEC_HAS_CONTENTS is clear.
(ecoff_write_object_contents): Don't set scnptr to zero just
because size of section is zero. Needed for Irix 4.0.5F.
(TARDIRS): Add gdbserver.
* exec.c (print_section_info): Print entry point.
* i386lynx-nat.c (i386lynx_saved_pc_after_call): Move into
i386lynx-tdep.c. Add core file support.
* i386lynx-tdep.c: New module for Lynx/386 target dependant code.
* maint.c: Add `maint info sections' command to print info about all
sections that BFD knows about for exec and core files.
* sparc-tdep.c (sparc_push_dummy_frame): Update stack pointer
before putting frame on the stack. Consolidate writes to reduce
traffic for remote debugging.
* config/i386/i386lynx.mh (NATDEPFILES): Remove exec.o.
* config/i386/i386lynx.mt (TDEPFILES): Add exec.o, i386lynx-tdep.o.
* config/i386/nm-i386lynx.h: Add target_pid_to_str().
* config/i386/tm-i386lynx.h: Remove target_pid_to_str().
* sparclite/Makefile.in: Add deps to keep Sun make happy.
* bfd-in2.h (tdata): Add lynx_core_data;
* config.bfd configure.host: Get rid of superfluous netbsd and
lynxos entries.
* configure.in: Add lynx-core.o to Lynx config.
* i386lynx.c: Add defs for core file support.
* lynx-core.c: New file with Lynx core file support.
* hosts/i386lynx.h: Move lots of host specific includes to here.
Add def of HOST_LYNX. Remove unnecessary defs.
* bfd-in2.h (tdata): Add lynx_core_data;
* config.bfd configure.host: Get rid of superfluous netbsd and
lynxos entries.
* configure.in: Add lynx-core.o to Lynx config.
* i386lynx.c: Add defs for core file support.
* lynx-core.c: New file with Lynx core file support.
* hosts/i386lynx.h: Move lots of host specific includes to here.
Add def of HOST_LYNX. Remove unnecessary defs.
infcmd.c (step_1),
infrun.c (wait_for_inferior): collapse SHIFT_INST_REGS ifdef and insert macro.
* m88k-tdep.c: include ieee-float.h. new global target_is_m88110.
new const struct ext_format_m88110 for float format.
(pic_prologue_code): add braces.
(next_insn): remove unused variable buf.
(frame_find_saved_regs): remove unused variables next_addr,
saved_regs, regnum.
(frame_locals_address): remove unused variables frame, ap.
(frame_args_address): remove unused variables frame, ap.
(push_parameters): add some breaks and a default case.
* remote-bug.c: remove redundant includes of value.h, target.h,
serial.h.
(bug_open): corrected typo, sr_multi_scan -> gr_multi_scan.
(bug_fetch_register): special case sfip register for m88110.
remove flag bit masking of pc registers. This should be handled
by the ADDR_BITS_* macros.
(bug_store_register): special case sfip register for m88110.
Corrected sprint format for extended registers.
ieee-float.h. expanded to cope with m88110 extended registers.
(R0_REGNUM, XFP_REGNUM, X0_REGNUM): new macros.
(SHIFT_INST_REGS): becomes a real macro.
use from the type.
* objfiles.c: Include gdb-stabs.h for SECT_* macros.
(objfile_relocate): Relocate textlow and texthigh in psymtabs.
Relocate partial symbols. Check that minimal SYMBOL_SECTION is
nonnegative before using it.
* symtab.h: Adjust section field comment.
going to print as unsigned, handle it generally for any length
less than sizeof (LONGEST), rather than special-casing sizeof (char),
sizeof (short), and sizeof (long). Clarify comment on what this
is for.
alignment adjustment. Clear BSF_SECTION_SYM if symbol is moved to
a different section. Use time_t for time variable.
(setup_sections): Only put sections with contents in output NLM.
(i386_mangle_relocs): No symbols are common at this point. Add
casts to avoid warnings.
SHF_PROGBITS or SHT_STRTAB section if SEC_ALLOC is set. Never set
SEC_DATA for a SHF_NOBITS section.
* nlm32-i386.c (nlm_i386_mangle_relocs): Check SEC_LOAD rather
than SEC_CODE | SEC_DATA. Add some casts to avoid warnings.
* nlmcode.h: Add some casts to avoid warnings.
(nlm_write_object_contents): Ignore relocs for sections that are
neither code nor data. Just use the symbol value for debugging
symbols; don't offset by the section vma.
all-autoconf now depends on all-m4
* Makefile.in ({AR,RANLIB}_FOR_TARGET): make contingent on
presence of {ar,ranlib} instead of a configured directory
Some of the following is in #ifdef CALL_DUMMY_BREAKPOINT_OFFSET.
* breakpoint.h (enum bptype): Add bp_call_dummy.
(struct bpstat_what): Add call_dummy field.
* infrun.c (wait_for_inferior): Deal with it.
* breakpoint.c (bpstat_what): Deal with call dummy breakpoint.
* infcmd.c (run_stack_dummy): Set the call dummy breakpoint.
* config/sparc/tm-sparc.h: Define CALL_DUMMY_BREAKPOINT_OFFSET.
* ld.h (flag_is_weak): Define.
* ldlang.c (print_symbol): Mention whether symbol is weak.
(print_input_section): Print weak symbols as globals.
* ldmain.c (refize): Do not zero out BSF_WEAK flag.
(enter_global_ref): Do not warn if a weak symbol redefines a
global symbol. Do not let a weak symbol redefine a common symbol.
(enter_file_symbols): Treat weak symbols as global symbols.
(subfile_wanted_p): Do not pull in an object file from a archive
just to resolve an undefined weak symbol.
* ldmisc.c (vfinfo): Don't needlessly malloc space after a fatal
error; the error might be that malloc has run out of space.
* ldsym.c (write_file_locals): Treat weak symbols as global.
* configure.in (i[34]86-*-sysv4*, i[34]86-*-elf*): New targets;
use i386-elf.
* config/i386v4.mh: New file; set NATIVE_LIB_DIRS to /usr/ccs/lib.
* config/i386-elf.mt: New file; set EMUL to elf_i386.
* emulparams/elf_i386.sh: New file.
* scripttempl/elf.sc: Use ${NOP} as filler (defaults to 0).
* Makefile.in (NATIVE_LIB_DIRS): Define to be empty.
(ALL_EMULATIONS): Add em_elf_i386.o.
(GENSCRIPTS): Pass NATIVE_LIB_DIRS as sixth argument.
(em_elf_i386.c): New target, like other em_*.c targets.
($(LD_PROG)): Pass $(CFLAGS) to $(CC).
* genscripts.sh: Accept NATIVE_LIB_DIRS as sixth argument. If
nonempty, and configured for native, add it to LIB_PATH.
* remote-sim.c: Add remote debug feature. Rename stuff to distinguish
interface to simulator from gdb-specific stuff. Other changes.
start-sanitize-v9
* remote-sp64sim.c: Renamed to remote-sim.c.
Use sr_get_debug instead of our own sim_verbose/simif_snoop.
Use gnutarget in call to bfd_openr.
Rename simif_* to gdbsim_*.
* config/sparc/sp64sim.mt: Change remote-sp64sim.c to remote-sim.c.
end-sanitize-v9