clear_proceed_status doesn't free the command tree we're
evaluating out from under us, zero the bpstat's pointer to it, and
take care of freeing it ourselves.
* cli/cli-script.c (make_cleanup_free_command_lines): Make this
function externally visible.
* cli/cli-script.h (make_cleanup_free_command_lines): New
declaration.
* linespec.h (decode_line_1): Add new not_found_ptr parameter.
* linespec.c (decode_line_1): Add new parameter. Pass on
new parameter to decode_variable and symtab_from_filename
functions.
(decode_variable): Add new not_found_ptr parameter. Throw exception
rather than failing if the not_found_ptr is non-null and the
function is not found.
(symtab_from_filename): Add new not_found_ptr parametr. Throw
exception rather than failing if the not_found_ptr is non-null and
the source file is not found.
* breakpoint.c: Change all callers of decode_line_1 to add default
extra parameter for decode_line_1 calls.
* tracepoint.c: Ditto.
* cli/cli-cmds.c: Ditto.
* breakpoint.c (breakpoint_enabled): New function to test whether
breakpoint is active and enabled.
(insert_bp_location, insert_breakpoints): Call new function to test
for enabled breakpoint.
(remove_breakpoint, breakpoint_here_p, breakpoint_thread_match)
(bpstat_should_step, bpstat_have_active_hw_watchpoints)
(disable_breakpoints_in_shlibs, hw_watchpoint_used_count)
(disable_watchpoints_before_interactive_call_start)
(breakpoint_re_set_one): Ditto.
(bpstat_stop_status): Use new function and simplify test.
instead of a breakpoint argument. Check the bp_location's type.
Fix a reversed condition for hardware breakpoints.
(insert_bp_location): Update call to remove_breakpoint.
(remove_breakpoints): Likewise. Use ALL_BP_LOCATIONS.
(remove_hw_watchpoints): Likewise.
(reattach_breakpoints): Likewise.
(detach_breakpoints): Likewise.
(delete_breakpoint): Likewise.
* breakpoint.c (ALL_BP_LOCATIONS, ALL_BP_LOCATIONS_SAFE): New
macros.
(bp_location_chain): New variable.
(allocate_bp_location): New function.
(set_raw_breakpoint): Use it.
(delete_breakpoint): Remove ->loc from the bp_location_chain.
``requested_address''.
* breakpoint.c (breakpoint_adjustment_warning)
(adjust_breakpoint_address): New static functions.
(print_it_typical): Issue warning if breakpoint's address is different
from its requested address.
(set_raw_breakpoint, set_longjmp_resume_breakpoint, watch_command_1)
(breakpoint_re_set_one): Set breakpoint's
``requested_address'' field. Set ``address'' field to the
result of calling adjust_breakpoint_address() on the requested
address.
* breakpoint.c (until_break_command): Add new argument. Use it to
decide whether to stop only at the current frame or not.
* breakpoint.h (until_break_command): Update prototype.
* infcmd.c (until_command): Add new argument to until_break_command
call.
(advance_command): New function.
(_initialize_infcmd): Update help string for 'until' command.
Add new 'advance' command.
* breakpoint.c: Include "gdb_assert.h".
(deprecated_frame_in_dummy): Assert that generic dummy frames are
not being used.
* Makefile.in (breakpoint.o): Update dependencies.
* ada-lang.c (find_printable_frame): Use get_frame_type instead of
deprecated_frame_in_dummy.
* stack.c (print_frame_info_base): Ditto.
(frame_info): Ditto.
(print_frame_info_base): Ditto. Delete dead code.
Index: tui/ChangeLog
2002-11-23 Andrew Cagney <ac131313@redhat.com>
* tuiStack.c (tuiShowFrameInfo): Use get_frame_type instead of
deprecated_frame_in_dummy. Fix coding style.
sal.end fields.
(get_current_or_default_source_symtab_and_line): Ditto.
* breakpoint.c (parse_breakpoint_sals): Use correct accessor function
so we do not cause a new source symtab to be searched for (reverting an
unintentional change from the 2002-09-20 patch).
* scm-lang.c (scm_unpac): Ditto.
current_source_line static.
(list_command): Moved to cli/cli-cmds.c.
(ambiguous_line_spec): Moved to cli/cli-cmds.c.
(get_first_line_listed): New accessor function.
(get_lines_to_list): New accessor function.
(get_current_source_symtab_and_line): New function. Retrieves the
position in the source code that we consider current.
(get_current_or_default_source_symtab_and_line): New function.
Like the above but attempts to determine a default position if one
is not currently defined.
(set_current_source_symtab_and_line): New function. Sets the source
code position considered current and returns the previously set one.
(clear_current_source_symtab_and_line): Reset stored information about
a current source line.
(_initialize_source): Remove registration for the "list" command and
its alias.
* source.h: Add declarations for the new functions above.
* symtab.h: Remove declarations for the global variables mentioned
above.
* breakpoint.c (parse_breakpoint_sals): Use accessor functions to
obtain current source line.
* linespec.c (decode_line_1): Ditto.
* macroscope.c (default_macro_scope): Ditto.
* scm-lang.c (scm_unpac): Ditto.
* stack.c (print_frame_info_base): Ditto.
* symfile.c (clear_symtab_users): Ditto.
* symtab.c (decode_line_spec): Ditto.
* cli/cli-cmds.c (list_command): Moved here from source.c.
(ambiguous_line_spec): Moved here from source.c.
(_init_cli_cmds): Add definition for "list" and its alias.
* Makefile.in: Update dependencies.
* cli/cli-script.c (copy_command_lines): New function.
* defs.h (copy_command_lines): Export.
* testsuite/gdb.base/commands.exp: New tests for commands
attached to a temporary breakpoint, and for commands that
delete the breakpoint they are attached to.
2002-08-26 Michael Snyder <msnyder@redhat.com>
* breakpoint.c (bpstat_stop_status): Instead of copying the
pointer to the breakpoint commands struct, make a new copy
of the struct and point to that.
(bpstat_clear): Free the commands struct.
(bpstat_clear_actions): Free the commands struct.
(bpstat_do_actions): Free the command actions. Also execute
the local cleanups, instead of deleting them.
(delete_breakpoint): Leave the commands field of the bpstat
chain alone -- it will be freed later.
when breakpoints fail. Move general breakpoint error messages to
insert_breakpoints.
* breakpoint.c (insert_breakpoints): Change warnings when
breakpoints are nto inserted to specify the type. Remove call to
memory_error when hardware breakpoints can't be inserted. Remove
multiple calls to warning so all messages are sent to the user at
once.
(delete_breakpoints): Make insert error messsages more explicit.
procfs appears to be broken when debugging on multi-processor
machines. So enable software single stepping in order to avoid
using the procfs interface to do next/step operations, using
internal breakpoints instead.
* infrun.c (handle_inferior_event): Readjust the stop_pc by
DECR_PC_AFTER_BREAK when hitting a single step breakpoint, to
make this pc address equal to the value it would have if the
system stepping capability was used. Also set a new flag used
to ensure that we don't readjust the PC one more time later.
* breakpoint.c (bpstat_stop_status): Do not adjust the PC
address by DECR_PC_AFTER_BREAK when software single step is
in use for this architecture, as this has already been taken
care of in handle_inferior_event().
when a condition is added to an existing breakpoint.
(commands_command): Likewise for commands.
(set_ignore_count): Likewise for ignore counts.
If no tty, do not simply return, still need to send event
notification.
(ignore_command): Only print a newline if the command came
from a tty.
Don't call breakpoints_changed, since this is now properly
handled by set_ignore_count.
selected_frame_address and selected_level with field
selected_frame_id.
(save_inferior_status): Update. Use get_frame_id.
(struct restore_selected_frame_args): Delete.
(restore_selected_frame): Update. Use frame_find_by_id.
(restore_inferior_status): Update.
* breakpoint.h (struct breakpoint): Change type of
watchpoint_frame to frame_id.
* breakpoint.c (insert_breakpoints): Use frame_find_by_id. Remove
call to get_current_frame.
(do_enable_breakpoint): Use frame_find_by_id. Remove call to
get_current_frame.
(watchpoint_check): Use frame_find_by_id.
* frame.h (record_selected_frame): Delete declaration.
* stack.c (record_selected_frame): Delete function.
* frame.h (struct frame_id): Define.
(get_frame_id): Declare.
(frame_find_by_id): Declare.
* frame.c (frame_find_by_id): New function.
(get_frame_id): New function.
* breakpoint.c (clear_command): Rewrite middle section to
combine two loops with identical control conditions.
Add a cleanup to eliminate a memory leak.
* stack.c (get_selected_block): Add new argument `addr_in_block',
used to return the exact code address we used to select the block,
not just the block.
* blockframe.c (get_frame_block, get_current_block): Same.
* frame.h (get_frame_block, get_current_block,
get_selected_block): Update declarations.
* linespec.c, stack.c, blockframe.c, breakpoint.c, findvar.c,
linespec.c, varobj.c, printcmd.c, symtab.c: Callers changed.
gdb/mi/ChangeLog:
* mi-cmd-stack.c (list_args_or_locals): Pass new arg to
get_frame_block. (See entry in gdb/ChangeLog.)
* breakpoint.c: Add support for hardware breakpoints in overlays.
(overlay_events_enabled): New state variable.
(insert_breakpoints): Use overlay_events_enabled to decide
whether to attempt to set a breakpoint at the overlay load addr.
Handle bp_hardware_breakpoint as well as bp_breakpoint.
(remove_breakpoint): Use overlay_events_enabled to decide
whether breakpoints need to be removed from overlay load addr.
Handle bp_hardware_breakpoint as well as bp_breakpoint.
(bpstat_stop_status): Handle bp_hardware_breakpoint in overlays.
(create_overlay_event_breakpoint, enable_overlay_breakpoints,
disable_overlay_breakpoints): Update overlay_events_enabled.
* gdbarch.c gdbarch.h: Regenerate.
* breakpoint.c (create_longjmp_breakpoint): Always compile this
function.
(breakpoint_reset): Test GET_LONGJMP_TARGET_P().
* infrun.c (GET_LONGJMP_TARGET): Delete default definition.
(handle_inferior_event): Test GET_LONGJMP_TARGET_P().
* arm-tdep.h (struct gdbarch_tdep): Add jb_pc and jb_elt_size fields.
* arm-tdep.c (arm_get_longjmp_target): New function.
(arm_gdbarch_init): Initialize jb_pc to -1. If ABI handler changes
this to a positive value register arm_get_longjmp_target as the
longjmp handler.
* arm-linux-tdep.c (arm_get_longjmp_target): Delete.
(arm_linux_init_abi): Set up longjmp description in tdep.
* armnbsd-nat.c (get_longjmp_target): Delete.
* armnbsd-tdep.c (arm_netbsd_init_abi_common): Set up longjmp
description in tdep.
* config/arm/tm-nbsd.h (JB_ELEMENT_SIZE, JB_PC): Delete.
(get_longjmp_target): Delete declaration.
(GET_LONGJMP_TARGET): Delete.
* config/arm/tm-linux.h (arm_get_longjmp_target): Delete declaration.
(GET_LONGJMP_TARGET): Delete.
* arch-utils.h (generic_in_function_epilogue_p): Declare extern.
* breakpoint.c (watchpoint_check): Add test whether the pc is
currently in the epilogue of a function.
* gdbarch.c: Autogenerated from gdbarch.sh.
* gdbarch.h: Ditto.
* gdbarch.sh (function_list): Add `in_function_epilogue_p' definition.
`enable' and `disable' identifiers, because some platforms define
in their system headers symbols with global scope that go by those
names.
* breakpoint.h (enum enable_state): Rename from `enum enable'.
Also rename all the enum members to have the "bp_" prefix.
(struct breakpoint): Rename the `enable' member to `enable_state'.
(enum bpdisp): Rename all members to have the "disp_" prefix.
* breakpoint.c: All users of `enum enable' and `enum bpdisp'
changed.
(args_for_catchpoint_enable): Rename the `enable' member to
`enable_p'. All users changed.
* tracepoint.h (enum enable): Remove.
(struct tracepoint): The member `enabled' is now `int enabled_p'.
* tracepoint.c: All users of the `enabled' member changed.
* printcmd.c (struct display): The `status' member is now an int.
* memattr.h (struct mem_region): Rename the `status' member to
`enabled_p'.
(enum enable): Remove.
* memattr.c: Change all users of the `status' member of struct
mem_region to use `enabled_p' instead.
* infcmd.c (run_stack_dummy): Use disp_del instead of del.
* go32-nat.c: Remove the kludgey work-around for conflicts between
<dos.h> and "breakpoint.h".
* tui/tuiSourceWin.c: Use disp_del instead of del.
* tui/tuiSource.c: Use disp_del instead of del.
* tui/tuiDisassem.c: Use disp_del instead of del.
* top.c (command_loop): Remove tui insert_mode hacks; don't call
tuiCleanUp because this must be made with atexit by tui.
* symfile.c (symbol_file_command): Remove call to TUIDO
* stack.c (show_and_print_stack_frame_stub): Remove tui check;
not necessary when using the selected frame hooks.
(print_stack_frame_stub): Likewise.
(print_frame_info_base): Likewise.
(print_frame_info): Likewise.
(up_silently_command): Likewise.
(down_silently_command): Likewise.
(show_stack_frame): Likewise for TUIDO.
(select_frame): Likewise.
(select_and_print_frame): Likewise.
(stack_publish_stopped_with_no_frame): Remove.
(select_and_maybe_print_frame): Remove.
* main.c (captured_main): Remove tui_fileopen and tuiInit; tui
must use the initialize ui hook.
* infrun.c (normal_stop): Remove call to TUIDO; tui must use the
selected frame hooks.
* event-top.c (command_handler): Remove tui insert_mode hack.
* defs.h: Remove TUIDO; Only include tui.h.
* breakpoint.c (mention): Remove calls to TUIDO.
(delete_breakpoint): Remove tui hacks; tui must install
the breakpoint hooks.
* infrun.c (handle_inferior_event): Replace prev_pc test in all
calls to bpstat_stop_status (removed in 1999-09-24). This test
helps distinguish stepping over a breakpoint trap from stepping
thru a jump to the instruction after a breakpoint trap.
(handle_inferior_event): Don't bother writing the PC if
DECR_PC_AFTER_BREAK is zero (optimization).
* breakpoint.c (bpstat_stop_status): Add comment explaining the
purpose and usage of the "not_a_breakpoint" argument in computing
the breakpoint address.
(line_completion_function): If we are completing on locations,
back up the start of word pointer past all characters which can
appear in a location spec.
(location_completer): New function.
* completer.h: Add prototype for location_completer.
* symtab.c (make_source_files_completion_list)
(add_filename_to_list, not_interesting_fname): New functions.
(filename_seen): New function, body extracted from
output_source_filename.
(output_source_filename): Call filename_seen to check if the file
was already printed.
(make_symbol_completion_list): If TEXT includes a
double-quoted string, return an empty list, not NULL.
(make_file_symbol_completion_list): New function, similar to
make_symbol_completion_list but with an additional argument
SRCFILE.
* symtab.h (make_file_symbol_completion_list)
(make_source_files_completion_list): Add prototypes.
* breakpoint.c (_initialize_breakpoint): Make location_completer
be the completion function for all commands which set breakpoints
and watchpoints.
(top-level): #include "completer.h".
* tracepoint.c (_initialize_tracepoint): Make location_completer
be the completion function for the "trace" command.
(top-level): #include "completer.h".
* printcmd.c (_initialize_printcmd): Make location_completer be
the completion function for the "print", "inspect", "call", and
"disassemble" commands.
(top-level): #include "completer.h".
* infcmd.c (_initialize_infcmd): Make location_completer be the
completion function for the "go", "jump", and "until" commands.
(top-level): #include "completer.h".
* breakpoint.c (delete_breakpoint): Pass mark_inserted to
remove_breakpoint, so that the subsequent test for
bpt->inserted will succeed, and duplicates will be fixed up.
* thread.c (delete_step_resume_breakpoint): New function.
Maintain internal consistency of the thread list while deleting
a step_resume_breakpoint.
* gdbthread.h (delete_step_resume_breakpoint): Export.
* breakpoint.c (bpstat_find_step_resume_breakpoint):
Make thread-aware: don't return a step_resume_breakpoint
for the wrong thread.
* infrun.c (wait_for_inferior): Call delete_step_resume_breakpoint
instead of delete_breakpoint_current_contents.
(fetch_inferior_event): Ditto.
(handle_inferior_event): Call delete_step_resume_breakpoint
instead of delete_breakpoint.
its address, to decide whether it's a watchpoint or not. Zero
is a valid code address.
(update_breakpoints_after_exec): Admonishing comments.
* breakpoint.h (struct breakpoint): Doc fixes.
* linespec.h: New file. Declarations for linespec.c.
* linespec.c, alpha-tdep.c, breakpoint.c, parse.c, source.c,
symtab.c, tracepoint.c: Include the above.
* completer.c: New file. Line completion stuff for GDB.
(get_gdb_completer_word_break_characters,
get_gdb_completer_quote_characters): New functions. Accessors for
useful completer internal data.
(filename_completer, line_completion_function, skip_quoted): Moved
here from top.c.
* completer.h: New file. Declarations for the above.
* linespec.c (decode_line_1): Use
get_gdb_completer_word_break_characters and
get_gdb_completer_quote_characters.
* top.c: Include completer.h.
(filename_completer, line_completion_function, skip_quoted):
Moved to completer.c.
* corefile.c, exec.c, source.c, symfile.c, linespec.c: Include
completer.h.
* Makefile.in (SFILES): Add completer.c.
(COMMON_OBS): Add completer.o.
(completer.o): New target.
(linespec.o, alpha-tdep.o, breakpoint.o, parse.o, source.o,
symtab.o, tracepoint.o): Add linespec.h to dependencies list.
(corefile.o, exec.o, source.o, symfile.o, linespec.o): Add completer.h
to dependencies list.
* valops.c (value_cast): Indentation fix-up.
* acconfig.h (HAVE_PRGREGSET32_T, HAVE_PRFPREGSET32_T,
HAVE_STRUCT_LINK_MAP32): New configure macros.
* config.in: Ditto.
* configure.in: Test for the above new macros.
* breakpoint.c: Update copyright date.
* core-sol2.c: Include v9/sys/privregs.h directly to
work around a bug in Sun's Solaris 8 header files.
(fetch_core_registers): Use the above new configure macros to
handle cross-debugging of 32-bit core files on a 64-bit host.
* sol-thread.c (ps_pdmodel) New function.
(rw_common): For debugging of 32-bit apps on a 64-bit host,
truncate addresses to 32 bits.
* solib.c (solib_extract_address): Functionize. Make 32/64 aware.
(LM_ADDR, LM_NEXT, LM_NAME): Ditto.
(IGNORE_FIRST_LINK_MAP): Ditto.
(first_link_map_member): Make 32/64 aware.
(open_symbol_file_object): Ditto.
(current_sos): Ditto.
* defs.h (struct continuation_arg): make 'data' a union, to avoid
casting problems when int and pointer are not the same size.
* event-top.c (command_handler): use data as a union.
(command_line_handler_continuation): ditto.
* infcmd.c (step_1_continuation): use data as a union. Re-indent.
(step_once): ditto. (finish_command_continuation): ditto.
(finish_command): ditto.
* breakpoint.c (until_break_command): use data as a union.
(until_break_command_continuation): ditto.
* utils.c (add_intermediate_continuation): fix typo in comment.
breakpoint.c, breakpoint.h (remove_hw_watchpoints): New function.
infrun.c (resume): Remove hardware watchpoints before stepping
when CANNOT_STEP_HW_WATCHPOINTS is nonzero.
* breakpoint.c (insert_breakpoints, do_enable_breakpoint):
Reselect the saved frame silently after frame selection for
watchpoint evaluation.
(insert_breakpoints): Add missing space in `Hardware watchpoint
deleted' message. Do not reinsert hardware watchpoint if it is
already marked for deletion at next stop.
* breakpoint.c (insert_breakpoints, remove_breakpoint)
(bpstat_stop_status, can_use_hardware_watchpoint): Don't insert,
remove, or check status of hardware watchpoints for entire structs
and arrays unless the user explicitly asked to watch that struct
or array.
(insert_breakpoints): Try to insert watchpoints for all the values
on the value chain, even if some of them fail to insert.
* values.c (value_primitive_field): Set the offset in struct value
we return when the field is a packed bitfield.
* blockframe.c (find_pc_sect_partial_function): Add braces to avoid
possible nested-if confusion.
* breakpoint.c (breakpoint_here_p): Ditto.
(breakpoint_inserted_here_p): Ditto.
(breakpoint_thread_match): Ditto.
* gnu-regex.c: Define _REGEX_RE_COMP only if it isn't already defined.
* gnu-regex.h: Define _REGEX_RE_COMP to pick up old compatability
prototypes.
* symtab.h: Add prototype for _initialize_source.
* value.h: Add prototype for _initialize_value.
* defs.h: Include sys/types.h or stddef.h to get size_t.
(make_cleanup): Add make_cleanup_func typedef and switch to using
a prototype for this function.
(mfree): Add prototypes for mmalloc, mrealloc, mfree if we aren't
using mmalloc.
* ax-gdb.c breakpoint.c coffread.c corelow.c dbxread.c dwarf2read.c
dwarfread.c elfread.c eval.c exec.c gdbtk-cmds.c gdbtk.c infcmd.c
infrun.c mipsread.c nlmread.c os9kread.c parse.c printcmd.c symfile.c
symmisc.c symtab.c thread.c top.c tracepoint.c typeprint.c valops.c:
Cast parameters passed to make_cleanup to use the new
make_cleanup_func typedef.
More warning cleanups. There are still a bunch of places where the first
argument to make_cleanup is not cast to (make_cleanup_func); these are
either due to the function fitting the make_cleanup_func specification
already (e.g. free()) or they are in files that weren't compiled when
I did my make on a Linux native system. Bwahahaha. You can see them
like this:
grep make_cleanup\ * | grep -v make_cleanup_func
I'll surely go back and clean up the remaining suspicious calls in
GDB one of these days. :-)
Thu Oct 1 15:39:27 EDT 1998 Frank Ch. Eigler <fche@cygnus.com>
* breakpoint.c (bpstat_stop_status): Do not consider an
untripped watchpoint as a "hit".
(readline_begin_hook, readline_hook, readline_end_hook): Declare.
* breakpoint.c (commands_command): Build message in temporary buffer
and pass that, as well as tty control flag, to read_command_lines.
* top.c (readline_begin_hook, readline_hook, readline_end_hook):
Define here.
(command_loop): Check for non-NULL instream before looping.
(command_line_input): Use readline_hook when appropriate, to get
user input from a GUI window.
(read_next_line): Also build prompt if getting user input from a GUI.
(recurse_read_control_structure): Fix typo in comment.
(read_command_lines): Use passed in prompt and tty flag to decide how
to build message. Use readline_begin_hook when appropriate, to set
up a GUI interaction window. Just return head, whether NULL or not,
after using readline_end_hook to complete GUI interaction.
(define_command, document_command): Build message in a temporary
buffer and pass it to read_command_lines, along with tty flag.
* gdbtk.c (gdbtk_readline_begin, gdbtk_readline, gdbtk_readline_end):
New functions.
(tk_command_loop): Set instream to NULL to enable Tk user interaction.
(gdbtk_init): Set readline_begin_hook, readline_hook,
and readline_end_hook.
* gdbtk.tcl (gdbtk_tcl_readline_begin, gdbtk_tcl_readline,
gdbtk_tcl_readline_end): New functions.
(tclsh): Pack scroll bar on right side of window, not left.
PR 9385
infrun.c, mac-nat.c, procfs.c, remote.c, sol-thread.c, thread.c,
win32-nat.c, config/nm-lynx.h: Rename thread.h to gdbthread.h to
avoid conflict with Solaris /usr/include/thread.h.
that is referenced nowhere else.
(set_breakpoint): Ditto.
(do_enable_breakpoint): Created from enable_once_breakpoint
with a couple of changes.
(enable_breakpoint): Call do_enable_breakpoint with an appropriate
bpdisp enum value to set disposition of breakpoint.
(enable_once_breakpoint): Ditto.
(enable_delete_breakpoint): Ditto.
* breakpoint.h (clear_momentary_breakpoints): Remove prototype.
* symtab.c (find_pc_line): Improve comments.
* gdbtk.c: Fix a couple of misspellings.
* xcoffread.c: Ditto.
* breakpoint.h (enum bpdisp): Add del_at_next_stop.
* breakpoint.c (insert_breakpoints, watchpoint_check,
bpstat_stop_status): Avoid bad references to memory freed via
delete_breakpoint on watchpoints going out of scope.
Do not delete these watchpoints, disable them and change their
disposition to del_at_next_stop instead.
(breakpoint_auto_delete): Delete all breakpoints whose disposition
is del_at_next_stop.
(breakpoint_init_inferior): Use switch to avoid reference to
already deleted breakpoint.
Fixes dangling pointer problems with watchpoints.
storage leaks.
(breakpoint_re_set_one): Fix b->exp, b->val, b->cond storage leaks.
* infcmd.c (run_command), solib.c (locate_base): Check for
target_has_execution in addition to inferior_pid, a core file
from a threaded program is yielding a non-zero inferior_pid.
* sparc-tdep.c (get_saved_register): Handle window registers
in a dummy frame correctly.
* breakpoint.c (breakpoint_re_set_one): Keep temporary
breakpoints bp_until, bp_finish, bp_watchpoint_cope, bp_call_dummy
and bp_step_resume in case breakpoint_re_set_one is called due
to a step over a dlopen call.
* infrun.c (wait_for_inferior): Always remove breakpoints from
inferior in BPSTAT_WHAT_CHECK_SHLIBS case.
that hardware watchpoint removal problems won't leave breakpoint
traps in the target.
* configure configure.in: Make --enable-gdbtk be the default.
* remote-e7000.c (e7000_insert_breakpoint,
e7000_remove_breakpoint): Use e7000 based breakpoints, not memory
breakpoints.
* (e7000_wait): Adjust PC back by two when we see a breakpoint to
compensate for e7000 maladjustment.
* sparcl-tdep.c (sparclite_check_watch_resources): Fix logic bug
which prevented hardware watchpoints from working.
around calls to create_longjmp_breakpoint. Why install the
breakpoints if we can't find the longjmp target?
* infrun.c (wait_for_inferior): Cleanup comments near call test.
* remote-mips.c: Fixed a bunch of prototypes to avoid char/int
complaint from picky compilers. Add comment to mips_expect.
Replace all instances of sr_get_debug with remote_debug.
* (mips_readchar): Don't jam init string to monitor.
mips_initialize() handles that.
* (mips_receive_header): Print better message when we get too
much garbage.
* (mips_request): Allow caller to pass in buff to allow them to
analyze the returned message.
* (mips_initialize): Re-do initialization to try sending a BREAK,
a ^C, and then a download escape sequence. Cleanup protocol
startup. Eliminate sleeps. Clear breakpoints (if using monitor
breakpoints). Re-init frame.
* (mips_detach): Close down target.
start-sanitize-gm
* (mips_resume): Pass signal down to target.
* (mips_create_inferior): Start target with TARGET_SIGNAL_PWR.
end-sanitize-gm
* (mips_wait): Handle return status with registers, or breakpoint stuff.
* (mips_kill): Add ^C handling.
* (mips_insert_breakpoint mips_remove_breakpoint): Call new
breakpoint stuff if enabled.
* (calculate_mask remote_mips_set_watchpoint
remote_mips_remove_watchpoint remote_mips_stopped_by_watchpoint):
Hardware watchpoint/breakpoint stuff.
* (common_breakpoint): Common code for new monitor breakpoint commands.
* (mips_load): Don't use `prompt'. It's a global variable.
* top.c (dont_repeat_command): New command for use in
user-defined commands to suppress auto-repeat (by hittin return key).
start-sanitize-gm
* utils.c (request_quit): Call target_kill here. Good idea.
Needs a better implementation.
end-sanitize-gm
* valops.c: Add start of auto function-call abandonment capability.
start-sanitize-gm
* c-exp.y: Add code (currently disabled) to handle GM dynamic
structures (it conflicts with @!).
* eval.c (evaluate_subexp_standard): ditto.
* expprint.c (print_subexp dump_expression): ditto.
* expression.h (enum exp_opcode): ditto.
* parse.c (length_of_subexp): ditto.
* configure, configure.in: Add mip*-*-magic* target.
* magic.c magic.h: Special routines to handle GM stuff (like
stepping through dispatcher).
end-sanitize-gm
commands.
* top.c (struct user_args): Structure for holding arguments to
user defined commands.
(print_command_line): Delete unused "tmp_chain" variable. Clean
up flow control by having cases exit in the same manner.
Before executing a command or evaluating an expression, substitute
the current $arg0..$arg9 values if the command/expression uses them.
(arg_cleanup): New function.
(setup_user_args, locate_arg, insert_args): Likewise.
(execute_user_command): Allow arguments to user defined commands.
* Allow if/while commands to be used within a breakpoint command
list.
* breakpoint.c (bpstat_do_actions): Call execute_control_command
rather than execute_command (passes entire command structure rather
than just the command line text).
(breakpoint_1): Use "print_command_line" to print a breakpoint
command line (including control structures).
* gdbcmd.h (execute_control_command): Provide extern decl.
(print_command_line): Likewise.
* top.c (execute_control_command): No longer static.
(print_command_line): New function to recursively print a command
line, including control structures.
and stack pointer during stepping, to speed things up.
A. Changes to not select a frame until we need a selected frame:
* blockframe.c (flush_cached_frames): Call select_frame (NULL, -1).
* infrun.c (wait_for_inferior): Move call to select_frame back to
normal_stop. This reverts a change of 13 Apr 94 (it says Jeff
Law, but the change was my idea); the only reason for that change
was so we could save and restore the selected frame in
wait_for_inferior, and now that flush_cached frames clears the
selected frame, that should work OK now.
B. Changes to not create a current_frame until we need one:
* blockframe.c (get_current_frame): If current_frame is NULL, try
to create an innermost frame.
* sparc-tdep.c (sparc_pop_frame), infcmd.c (run-stack_dummy),
infrun.c (wait_for_inferior), thread.c (thread_switch),
convex-tdep.c (set_thread_command), a29k-tdep.c (pop_frame),
alpha-tdep.c (alpha_pop_frame), convex-xdep.c (core_file_command),
h8300-tdep.c (h8300_pop_frame), h8500-tdep.c (h8300_pop_frame),
hppa-tdep.c (hppa_pop_frame), i386-tdep.c (i386_pop_frame),
i960-tdep.c (pop_frame), m68k-tdep.c
(m68k_pop_frame), mips-tdep.c (mips_pop_frame), rs6000-tdep.c
(push_dummy_frame, pop_dummy_frame, pop_frame), sh-tdep.c
(pop_frame), config/arm/tm-arm.h (POP_FRAME),
config/convex/tm-convex.h (POP_FRAME), config/gould/tm-pn.h
(POP_FRAME), config/ns32k/tm-merlin.h (POP_FRAME),
config/ns32k/tm-umax.h (POP_FRAME), config/tahoe/tm-tahoe.h
(POP_FRAME), config/vax/tm-vax.h (POP_FRAME): Don't
call create_new_frame.
* corelow.c (core_open), altos-xdep.c (core_file_command),
arm-xdep.c (core_file_command), gould-xdep.c (core_file_command),
m3-nat.c (select_thread), sun386-nat.c (core_file_command),
umax-xdep.c (core_file_command): Don't call create_new_frame; do
call flush_cached_frames.
* blockframe.c (reinit_frame_cache): Don't call create_new_frame
or select_frame.
C. Changes to get rid of stop_frame_address and instead only
fetch the frame pointer when we need it.
* breakpoint.c (bpstat_stop_status): Remove argument
frame_address; use FRAME_FP (get_current_frame ()).
* infrun.c (wait_for_inferior): Don't pass frame pointer to
bpstat_stop_status.
* infrun.c (wait_for_inferior): Use FRAME_FP (get_current_frame
()) instead of stop_frame_address.
* infrun.c (save_inferior_status, restore_inferior_status),
inferior.h (struct inferior_status): Don't save and restore
stop_frame_address.
* inferior.h, infcmd.c, thread.c (thread_switch), m3-nat.c
(select_thread): Remove stop_frame_address and uses thereof.
D. Same thing for the stack pointer.
* infrun.c (wait_for_inferior): Remove stop_sp and replace
uses thereof with read_sp ().
E. Change to eliminate one nasty little spot where we were
wanting to know the frame pointer from before the current step
(idea from GDB 3.5, which saved my ass, because my other ideas of
how to fix it were very baroque).
* infrun.c: Remove prev_frame_address.
* infrun.c (wait_for_inferior, step_over_function): Use
step_frame_address instead of prev_frame_address.
F. Same basic idea for the stack pointer.
* inferior.h, infcmd.c: New variable step_sp.
* infcmd.c (step_1, until_next_command): Set it.
* infrun.c: Remove prev_sp and replace uses by step_sp.
* infrun.c (wait_for_inferior): If we get out of the step
range, then set step_sp to the current stack pointer before we
start going again.
* breakpoint.c (delete_breakpoint, enable_breakpoint,
disable_breakpoint): Don't call breakpoints_changed; it is now
called via the *_breakpoint_hook functions.
* annotate.c (_initialize_annotate, breakpoint_changed): New functions.
--enable-xxx configure option by adding ENABLE_{CLIBS DEPFILES}
where appropriate.
* General hackery to support alternate user-interface.
* breakpoint.c (mention, delete_breakpoint, enable_breakpoint,
disable_breakpoint): Call hooks for alternate user-interface.
* defs.h: Add declarations for alternate user-interface hooks.
* main.c (main): Add --nw (and --nowindows) options to disable
the GUI.
* (near call to command_loop): Call command_loop_hook if set.
* (fputs_unfiltered): Call fputs_unfiltered_hook if set.
* stack.c: Call print_frame_info_listing_hook if set.
* top.c (gdb_init): Initialize targets.c and utils.c prior to
other files to make sure that calls to error and warning will
work. Call init_ui_hook after everything else.
* utils.c (query): Call query_hook if set.
* (gdb_flush): Call flush_hook if set.
* Change _initialize_utils to initialize_utils cuz we don't use
automatic initialization of utils.c anymore.
* Support for TK GUI.
* Makefile.in: Add rule for gdbtk.o.
* configure.in: Add support for --enable-gdbtk.
* gdbtk.c: New file. Contains support routines for TK interface.
* gdbtk.tcl: New file. Implements GUI policy.
* remote.c: Get rid of #ifdef DONT_USE_REMOTE. It's no longer
necessary.
* breakpoint.h (hit_count): New breakpoint field.
* breakpoint.c (show_breakpoint_hit_counts): New variable.
(clear_breakpoint_hit_counts): New function.
(bpstat_stop_status): Increment the hit count.
(breakpoint_1): Display the hit count.
* infcmd.c (run_command): Reset breakpoint hit counts.
* target.c (generic_mourn_inferior): Don't clear ignore counts if
displaying hit counts.
target null pointer.
* blockframe.c (find_frame_addr_in_frame_chain): Likewise.
* printcmd.c (output_command): Annotate things we print here too.
* Move declaration of print_value_flags from defs.h to value.h.
* main.c (command_line_input): Call wrap_here as well as gdb_flush.
the same as --annotate=1.
(command_line_input): Print annotatation before and after prompt.
* blockframe.c (flush_cached_frames): Print annotation.
* Rename frame_file_full_name to annotation_level and move it from
symtab.h to defs.h.
* source.c (identify_source_line): If annotation_level > 1,
change output format.
* breakpoint.c: Print annotation whenever a breakpoint changes.
* main.c: New variable server_command.
(command_line_input): Parse "server " and set server_command.
(dont_repeat): Check server_command.
bp_watchpoint_scope breakpoints.
(struct breakpoint): Add val_chain and related_breakpoint fields
for use by watchpoints.
* breakpoint.c (within_scope): Delete. No longer used.
(TARGET_CAN_USE_HARDWARE_WATCHPOINT): Provide default definition.
(target_{remove,insert}_watchpoint): Likewise.
(can_use_hardware_watchpoint): New function.
(remove_breakpoint): New function to remove a single breakpoint
or hardware watchpoint.
(insert_breakpoints): Handle insertion of hardware watchpoints.
Store a copy of the value chain derived from the watchpoint
expression.
(remove_breakpoints): Simplify by using remove_breakpoint.
(delete_breakpoint): Likewise.
(watchpoint_check): Delete the watchpoint and watchpoint scope
breakpoints when the watchpoint goes out of scope. Save & restore
the current frame after checking watchpoints.
(breakpoint_init_inferior): Likewise (restarting the program
makes all local watchpoints go out of scope).
(bpstat_stop_status): Handle hardware watchpoints much like normal
watchpoints. Delete the watchpoint and watchpoint scope breakpoint
when the watchpoint goes out of scope. Remove and reinsert all
breakpoints before returning if we stopped when a hardware watchpoint
fired.
(watch_command): Use a hardware watchpoint when possible. If
watching a local expression, build a scope breakpoint too.
(map_breakpoint_numbers): Also call given function for any
related breakpoints.
(disable_breakpoint): Never disable a scope breakpoint.
(enable_breakpoint): Handle hardware breakpoints much like normal
breakpoints, but recompute the watchpoint_scope breakpoint's
frame and address (if we have an associated scope breakpoint).
(read_memory_nobpt): Handle hardware watchpoints like normal
watchpoints. When necessary handle watchpoint_scope breakpoints.
(print_it_normal, bpstat_what, breakpoint_1, mention): Likewise.
(clear_command, breakpoint_re_set_one, enable_command): Likewise.
(disable_command): Likewise.
* blockframe.c (find_frame_addr_in_frame_chain): New function.
Extern prototype added to frame.h
* infrun.c (wait_for_inferior): Set current_frame and select
a frame before checking if we stopped due to a hardare watchpoint
firing. Handle stepping over hardware watchpoints.
(normal_stop): Remove unnecessary call to select_frame.
* value.h (value_release_to_mark): Declare.
* values.c (value_release_to_mark): New function.
* procfs.c (procfs_wait): Add cases for hardware watchpoints.
(procfs_set_watchpoint, procfs_stopped_by_watchpoint): New functions.
* hppab-nat.c (hppa_set_watchpoint): New function.
* config/pa/nm-hppab.h (STOPPED_BY_WATCHPOINT): Define.
(HAVE_STEPPABLE_WATCHPOINT): Define.
(TARGET_CAN_USE_HARDWARE_WATCHPOINT): Define.
(target_{insert,delete}_watchpoint): Define.
cp-valprint.c, eval.c, expprint.c, findvar.c, language.c,
objfiles.h, infcmd.c, printcmd.c, stack.c, typeprint.c,
valarith.c, valops.c, valprint.c, value.h, values.c: Replace
value with value_ptr. This is for the ptx compiler.
* objfiles.h, target.h: Don't declare a "sec_ptr" field using a
"sec_ptr" typedef.
* symm-nat.c: Add a bunch of stuff for symmetry's ptrace stuff.
#if 0 i386_float_info.
* symm-tdep.c (round): Remove. Also remove sgttyb.
* symm-tdep.c: Remove lots of stuff which duplicates stuff from
i386-tdep.c. Remove register_addr and ptx_coff_regno_to_gdb.
* i386-tdep.c (i386_frame_find_saved_regs): Put in
I386_REGNO_TO_SYMMETRY check in case it is needed for Dynix
someday.
* config/i386/nm-symmetry.h: Change KERNEL_U_ADDR. Move
stuff from PTRACE_READ_REGS, PTRACE_WRITE_REGS macros to
symm-nat.c. Define CHILD_WAIT and declare child_wait().
* config/i386/tm-symmetry.h: Remove call function stuff; stuff in
tm-i386v.h is apparently OK.
* config/i386/xm-symmetry.h [_SEQUENT_]: Define HAVE_TERMIOS not
HAVE_TERMIO. Define MEM_FNS_DECLARED, NEED_POSIX_SETPGID, and
USE_O_NOCTTY.
(bpstat_what_main_action): New code BPSTAT_WHAT_THROUGH_SIGTRAMP.
* breakpoint.c (bpstat_what): Return BPSTAT_WHAT_THROUGH_SIGTRAMP
if we hit a bp_through_sigtramp breakpoint. Remove kludge which
ignored bs->stop for a bp_step_resume breakpoint.
* infrun.c (wait_for_inferior): Make a through_sigtramp_breakpoint
which performs one (the check_sigtramp2 one) of the functions
which had been handled by the step_resume_breakpoint. For each
use of the step_resume_breakpoint, make it still use the
step_resume_breakpoint, use the through_sigtramp_breakpoint, or
operate on both.
Deal with BPSTAT_WHAT_THROUGH_SIGTRAMP return from bpstat_what.
When setting the frame address of the step resume breakpoint, set
it to the address for frame *before* the call instruction is
executed, not after.
various miscellaneous things discovered in the process:
* printcmd.c, defs.h (print_address_numeric): New function.
* c-valprint.c (c_val_print), ch-valprint.c (chill_val_print)
breakpoint.c (describe_other_breakpoints, breakpoint_1, mention),
cp-valprint.c (cplus_print_value), infcmd.c (jump_command),
printcmd.c, stack.c, symfile.c, symmisc.c, valprint.c:
Use it.
* utils.c, defs.h (gdb_print_address): New function.
* expprint (dump_expression), gdbtypes.h: Use it.
* breakpoint.c (describe_other_breakpoints),
symmisc.c (dump_symtab, print_symbol):
Use filtered not unfiltered I/O.
(remove_breakpoints): Remove BREAKPOINT_DEBUG code. Might as well
just run gdb under a debugger for this (and it had problems with
printing addresses, how to print b->shadow, etc.).
* buildsym.c (make_blockvector), core.c (memory_error),
exec.c (print_section_info), maint.c (print_section_table),
mdebugread.c (parse_procedure), solib.c, source.c, symfile.c,
symmisc.c, symtab.c, valops.c, valprint.c, xcoffexec.c:
Add comments saying code is broken. Marked with "FIXME-32x64".
* dbxread.c (process_one_symbol), partial-stab.h (default),
remote-vx.c (vx_run_files_info):
Don't cast int being passed to local_hex_string.
* symmisc.c (print_symbol): Don't cast long being passed to %lx.
* symtab.h (general_symbol_info): Add comment about SYMBOL_VALUE
only being a long.
* symmisc.c (print_symbol): Print "offset" in message for LOC_ARG
and LOC_LOCAL.
* printcmd.c (print_address): Remove #if 0 code with ADDR_BITS_REMOVE.
* source.c: Include <sys/types.h> regardless of USG.
step_resume_breakpoint for IN_SIGTRAMP cases.
* infrun.c (wait_for_inferior), breakpoint.h (struct bpstat_what),
breakpoint.c (bpstat_what): Move step_resume from its own field of
the struct bpstat_what into the main_action. Make it override
other breakpoints. This is a conservative change in the sense
that before the step resume breakpoint was a breakpoint.c
breakpoint, hitting the step resume breakpoint overrode even
calling bpstat_stop_status.
Change all references to stdout/stderr to gdb_stdout/gdb_stderr.
Replace all calls to stdio output functions with calls to
corresponding _unfiltered functions (`fprintf_unfiltered')
Replaced calls to fopen for output to gdb_fopen.
Added sufficient goo to utils.c and defs.h to make the above work.
The net effect is that stdio output functions are only directly used
in utils.c. Elsewhere, the _unfiltered and _filtered functions and
GDB_FILE type are used.
In the near future, GDB_FILE will stop being equivalant to FILE.
The semantics of some commands has changed in a very subtle way:
called in the right context, they may cause new occurences of
prompt_for_continue() behavior. The testsuite doesn't notice anything
like this, though.
Please respect this change by not reintroducing stdio output
dependencies in the main body of gdb code. All output from commands
should go to a GDB_FILE.
Target-specific code can still use stdio directly to communicate with
targets.
that clears the `inserted' flag for all breakpoints and deletes
any breakpoints which should go away between runs of programs.
* inflow.c (generic_mourn_inferior), infrun.c (init_wait_for_inferior),
remote-es.c (es1800_load), comments in exec.c and corelow.c:
Use it instead of mark_breakpoints_out.
* breakpoint.c (mark_breakpoints_out): Update comment, tm-rs6000.h
uses it in a completely different context.
* breakpoint.c (breakpoint_re_set_one): Add bp_call_dummy case.
* alpha-nat.c, alpha-tdep.c, config/alpha/alpha-osf1.mt,
config/alpha/nm-alpha.h, config/alpha/tm-alpha.h, osfsolib.c:
New files.
* Makefile.in: Add new files and dependencies.
* configure.in: Add alpha target.
* config/alpha/alpha-osf1.mh (NATDEPFILES): Add osfsolib.o
* config/alpha/alpha-osf1.mh (MH_CFLAGS): Remove, we can handle
shared libraries now.
* config/alpha/xm-alpha.h: Cleanup, get MAKEVA_* defines right.
* defs.h (CORE_ADDR): Make its type overridable via CORE_ADDR_TYPE,
provide `unsigned int' default.
* breakpoint.c (breakpoint_auto_delete): Delete only if we really
stopped for the breakpoint.
* stabsread.c, stabsread.h (define_symbol): Change valu parameter
to a CORE_ADDR.
* stabsread.c (read_range_type): Handle the case where the lower
bound overflows and the upper doesn't and the range is legal.
* infrun.c (resume): Do not step a breakpoint instruction if
CANNOT_STEP_BREAKPOINT is defined.
* inferior.h (CALL_DUMMY_LOCATION): New variant AT_ENTRY_POINT.
Now that we have the bp_call_dummy breakpoint the call dummy code
is no longer needed. PUSH_DUMMY_FRAME, PUSH_ARGUMENTS and
FIX_CALL_DUMMY can be used to set up everything for the dummy.
The breakpoint for the dummy is set at the entry point and thats it.
* blockframe.c (inside_entry_file, inside_entry_func): Do not stop
backtraces if pc is in the call dummy at the entry point.
* infcmd.c (run_stack_dummy): Handle AT_ENTRY_POINT case. Use
the expected breakpoint pc when setting up the frame for
set_momentary_breakpoint.
* symfile.c (entry_point_address): New function for AT_ENTRY_POINT
support.
* valops.c (call_function_by_hand): Handle AT_ENTRY_POINT case.
infcmd.c (step_1),
infrun.c (wait_for_inferior): collapse SHIFT_INST_REGS ifdef and insert macro.
* m88k-tdep.c: include ieee-float.h. new global target_is_m88110.
new const struct ext_format_m88110 for float format.
(pic_prologue_code): add braces.
(next_insn): remove unused variable buf.
(frame_find_saved_regs): remove unused variables next_addr,
saved_regs, regnum.
(frame_locals_address): remove unused variables frame, ap.
(frame_args_address): remove unused variables frame, ap.
(push_parameters): add some breaks and a default case.
* remote-bug.c: remove redundant includes of value.h, target.h,
serial.h.
(bug_open): corrected typo, sr_multi_scan -> gr_multi_scan.
(bug_fetch_register): special case sfip register for m88110.
remove flag bit masking of pc registers. This should be handled
by the ADDR_BITS_* macros.
(bug_store_register): special case sfip register for m88110.
Corrected sprint format for extended registers.
Some of the following is in #ifdef CALL_DUMMY_BREAKPOINT_OFFSET.
* breakpoint.h (enum bptype): Add bp_call_dummy.
(struct bpstat_what): Add call_dummy field.
* infrun.c (wait_for_inferior): Deal with it.
* breakpoint.c (bpstat_what): Deal with call dummy breakpoint.
* infcmd.c (run_stack_dummy): Set the call dummy breakpoint.
* config/sparc/tm-sparc.h: Define CALL_DUMMY_BREAKPOINT_OFFSET.
* stabsread.c (define_symbol): Make the caddr_t hack apply to `function
returning foo' as well as `pointer to foo'.
* remote.c [REMOTE_BREAKPOINT]: Use for breakpoint insn if defined.
* config/m68k/tm-m68k.h: Define it.
* mem-break.c, breakpoint.c: Improve comments.
Tue Jul 13 13:35:31 1993 Frederic Pierresteguy (F.Pierresteguy@frcl.bull.fr)
* config/m68k/tm-dpx2.h: Replace "tm-68k.h" with "m68k/tm-m68k.h".
* config/m68k/xm-dpx2.h: Define HAVE_TERMIOS not HAVE_TERMIO.
val.end is in the same function, not minimal symbols.
* source.c (line_info): Add a few more wrap_here's.
* i386-tdep.c (i386_follow_jump): Do byteswapping where needed and
don't make assumptions about sizes of host data types.
* blockframe.c, symtab.h (find_pc_partial_function): New arg endaddr.
* infrun.c, breakpoint.c, printcmd.c: Change callers.
* printcmd.c (containing_function_bounds): Remove.
* printcmd.c (disassemble_command): Use find_pc_partial_function,
not containing_function_bounds.
* infcmd.c (step_1): Use find_pc_partial_function rather than
trying to roll our own. Move check for a pc between SIGTRAMP_START and
SIGTRAMP_END in find_pc_partial_function, not step_1.
step_resume_break_address with step_resume_breakpoint (now local
to wait_for_inferior).
({insert,remove}_step_breakpoint): Remove.
(wait_for_inferior): Set step resume break with
set_momentary_breakpoint. Test hitting it with bpstat_stop_status
and bpstat_what (stop_step_resume_break removed).
* breakpoint.{h,c}, infrun.c: Return value from bpstat_what now struct
which includes previous return value as main_action, and a step_resume
bit.
* breakpoint.c (delete_breakpoint): If breakpoint was inserted, and
there is another breakpoint there, insert it.
* infrun.c (wait_for_inferior): Rearrange the spaghetti a bit. Use
a few more gotos.
Various: Clean up and add comments.
Remove bpstat_momentary_breakpoint. This was always kludgy
and is no longer used.
* breakpoint.h: Add enum bpstat_what.
breakpoint.h (struct bpstat), breakpoint.c (bpstat_stop_status):
stop and print fields of bpstat now per-breakpoint, not just
one for the whole chain.
breakpoint.{c,h} (bpstat_what): New function.
breakpoint.h: Remove bpstat_stop and bpstat_should_print.
infrun.c: Replace switch (stop_bpstat->breakpoint_at->type)
with call to bpstat_what.
README: Remove watchpoint/breakpoint bug from known bugs.
* breakpoint.h: Prototype bpstat_find_breakpoint.
* command.c (do_setshow_command): Use %u with var_{u,z}integer.
* command.{c,h}: New var_type var_integer.
main.c: Use it for history_size.
* rs6000-tdep.c, xcoffexec.c, config/rs6000/xm-rs6000.h, breakpoint.c:
Lint and byte-order fixups.
breakpoint.c (bpstat_print): Use it.
(print_it_normal): New function (from old bpstat_print code).
(bpstat_{alloc,stop_status}): Set print_it field.
* breakpoint.c (bpstat_stop_status): Use catch_errors when
evaluating watchpoint condition, via new function watchpoint_check.
Also stop if watchpoint disabled due to leaving its block.
* breakpoint.c (enable_breakpoint): Don't enable watchpoint if it
went out of scope.
* exec.c (exec_close): Fix storage leak.
* exec.c (exec_file_command): Make sure that bfd doesn't realign the
output sections when patching an executable.
* mips-nat.c (store_inferior_registers): Use REGISTER_PTRACE_ADDR
when writing all registers.
* mips-tdep.c (mips_push_dummy_frame): Save floating point registers
at the right offset in the dummy frame.
* mipsread.c (psymtab_to_symtab_1): Do not complain for stProc,
stStaticProc and stEnd symbols as they are generated by gcc-2.x.
* mipsread.c (mipscoff_new_init): Initialize stabsread and buildsym.
