Way back in aba6488e0b, a bunch of signal
defines were changed to TARGET_SIGNAL_xxx. For d10v, the transition was
incomplete which lead to sim_stop_reason using the new set but sim_resume
still using the old set. Which meant in some cases, the sim would never
actually stop.
Convert all the remaining SIGxxx defines in here to TARGET_SIGNAL_xxx.
This has the nice side effect of fixing the testsuite.
2015-03-27 Renlin Li <renlin.li@arm.com>
gas/
* config/tc-aarch64.c (mapping_state): Emit MAP_DATA within text section in order.
(mapping_state_2): Don't emit MAP_DATA here.
(s_aarch64_inst): Align frag during state transition.
(md_assemble): Likewise.
I see these two fails in no-unwaited-for-left.exp in remote testing
for aarch64-linux target.
...
continue
Continuing.
warning: Remote failure reply: E.No unwaited-for children left.
[Thread 1084] #2 stopped.
(gdb) FAIL: gdb.threads/no-unwaited-for-left.exp: continue stops when thread 2 exits
....
continue
Continuing.
warning: Remote failure reply: E.No unwaited-for children left.
[Thread 1081] #1 stopped.
(gdb) FAIL: gdb.threads/no-unwaited-for-left.exp: continue stops when the main thread exits
I checked the gdb.log on buildbot, and find that these two fails also
appear on Debian-i686-native-extended-gdbserver and Fedora-ppc64be-native-gdbserver-m64.
I recall that they are about local/remote parity, and related RSP is missing.
There has been already a PR 14618 about it. This patch is to kfail them
on remote target.
gdb/testsuite:
2015-04-02 Yao Qi <yao.qi@linaro.org>
* gdb.threads/no-unwaited-for-left.exp: Set up kfail if target
is remote.
This commit makes GDB default to a sysroot of "target:".
One testcase needed updating as a result of this change.
gdb/ChangeLog:
* main.c (captured_main): Set gdb_sysroot to "target:"
if not otherwise set.
gdb/testsuite/ChangeLog:
* gdb.base/break-probes.exp: Cope with "target:" sysroot.
This commit adds support for filenames prefixed with "target:" to
exec_file_attach. This is required to correctly follow inferior
exec* calls when a gdb_sysroot prefixed with "target:" is set.
gdb/ChangeLog:
* exec.c (exec_file_attach): Support "target:" filenames.
This commit updates solib_find to strip the "target:" prefix from
gdb_sysroot when accessing local files. This ensures that the same
search algorithm is used for local files regardless of whether a
"target:" prefix was used or not. It also avoids cluttering GDB's
output with unnecessary "target:" prefixes on paths.
gdb/ChangeLog:
* solib.c (solib_find): Strip "target:" prefix from sysroot
if accessing local files.
symfile_bfd_open handled what were remote files as a special case.
Converting from "remote:" files to "target:" made symfile_bfd_open
look like this:
if remote:
open bfd, check format, etc
return
local-specific stuff
open bfd, check format, etc
return
This commit rearranges symfile_bfd_open to remove the duplicated
code, like this:
if local:
local-specific stuff
open bfd, check format, etc
return
gdb/ChangeLog:
* symfile.c (symfile_bfd_open): Reorder to remove duplicated
checks and error messages.
The functionality of "target:" sysroots is a superset of the
functionality of "remote:" sysroots. This commit causes the
"set sysroot" command to rewrite "remote:" sysroots as "target:"
sysroots and replaces "remote:" specific code with "target:"
specific code where still necessary.
gdb/ChangeLog:
* remote.h (REMOTE_SYSROOT_PREFIX): Remove definition.
(remote_filename_p): Remove declaration.
(remote_bfd_open): Likewise.
* remote.c (remote_bfd_iovec_open): Remove function.
(remote_bfd_iovec_close): Likewise.
(remote_bfd_iovec_pread): Likewise.
(remote_bfd_iovec_stat): Likewise.
(remote_filename_p): Likewise.
(remote_bfd_open): Likewise.
* symfile.h (gdb_bfd_open_maybe_remote): Remove declaration.
* symfile.c (separate_debug_file_exists): Use gdb_bfd_open.
(gdb_bfd_open_maybe_remote): Remove function.
(symfile_bfd_open): Replace remote filename check with
target filename check.
(reread_symbols): Use gdb_bfd_open.
* build-id.c (gdbcore.h): New include.
(build_id_to_debug_bfd): Use gdb_bfd_open.
* infcmd.c (attach_command_post_wait): Remove remote filename
check.
* solib.c (solib_find): Replace remote-specific handling with
target-specific handling. Update comments where necessary.
(solib_bfd_open): Replace remote-specific handling with
target-specific handling.
(gdb_sysroot_changed): New function.
(_initialize_solib): Call the above when gdb_sysroot changes.
* windows-tdep.c (gdbcore.h): New include.
(windows_xfer_shared_library): Use gdb_bfd_open.
This commit updates gdb_bfd_open to access files using target
fileio functions if the supplied path starts with "target:"
and if the local and target filesystems are not the same.
This allows users to specify "set sysroot target:" and have
GDB access files locally or from the remote as appropriate.
The new functions in gdb_bfd.c are copies of functions from
remote.c. This duplication is intentional and will be removed
by the next commit in this series.
gdb/ChangeLog:
* gdb/gdb_bfd.h (TARGET_SYSROOT_PREFIX): New definition.
(is_target_filename): New declaration.
(gdb_bfd_has_target_filename): Likewise.
(gdb_bfd_open): Update documentation comment.
* gdb_bfd.c (target.h): New include.
(gdb/fileio.h): Likewise.
(is_target_filename): New function.
(gdb_bfd_has_target_filename): Likewise.
(fileio_errno_to_host): Likewise.
(gdb_bfd_iovec_fileio_open): Likewise.
(gdb_bfd_iovec_fileio_pread): Likewise.
(gdb_bfd_iovec_fileio_close): Likewise.
(gdb_bfd_iovec_fileio_fstat): Likewise.
(gdb_bfd_open): Use target fileio to access paths prefixed
with "target:" where necessary.
This commit introduces a new target method target_filesystem_is_local
which can be used to determine whether or not the filesystem accessed
by the target_fileio_* methods is the local filesystem.
gdb/ChangeLog:
* target.h (struct target_ops) <to_filesystem_is_local>:
New field.
(target_filesystem_is_local): New macro.
* target-delegates.c: Regenerate.
* remote.c (remote_filesystem_is_local): New function.
(init_remote_ops): Initialize to_filesystem_is_local.
This commit introduces a new target method target_fileio_fstat
which can be used to retrieve information about files opened with
target_fileio_open.
gdb/ChangeLog:
* target.h (struct target_ops) <to_fileio_fstat>: New field.
(target_fileio_fstat): New declaration.
* target.c (target_fileio_fstat): New function.
* inf-child.c (inf_child_fileio_fstat): Likewise.
(inf_child_target): Initialize to_fileio_fstat.
* remote.c (init_remote_ops): Likewise.
My all-stop-on-top-of-non-stop series manages to shows regressions due
to this latent bug. currently_stepping returns true if
stepped_breakpoint is set. Obviously we should clear
it before checking currently_stepping, not after.
Tested on x86_64 Fedora 20.
gdb/ChangeLog:
2015-04-01 Pedro Alves <palves@redhat.com>
* infrun.c (resume): Check currently_stepping after clearing
stepped_breakpoint, not before.
If interrupt_and_wait manages to trigger the FAIL path, we get:
ERROR OCCURED: can't read "test": no such variable
gdb/testsuite/ChangeLog:
2015-04-01 Pedro Alves <palves@redhat.com>
* gdb.threads/manythreads.exp (interrupt_and_wait): Pass $message
to fail instead of non-existent $test.
By inspection, I noticed a path where we return without discarding the
cleanups.
gdb/ChangeLog:
2015-04-01 Pedro Alves <palves@redhat.com>
* infrun.c (keep_going): Also discard cleanups if inserting
breakpoints fails.
Noticed that if an error is thrown out of target_wait, we miss running
finish_thread_state_cleanup.
Tested on x86_64 Fedora 20, with "maint set target-async off".
gdb/ChangeLog:
2015-04-01 Pedro Alves <palves@redhat.com>
* infrun.c (wait_for_inferior): Install the
finish_thread_state_cleanup cleanup across the whole function, not
just around handle_inferior_event.
We can use the recently added do_target_resume do simplify the code a
bit here.
Tested on x86_64 Fedora 20.
gdb/ChangeLog:
2015-04-01 Pedro Alves <palves@redhat.com>
* infrun.c (resume) <step past permanent breakpoint>: Use
do_target_resume.
My all-stop-on-top-of-non-stop series manages to trip on a bug in the
linux-nat.c backend while running the testsuite. If a thread is
discovered while threads are being momentarily paused (without the
core's intervention), the thread ends up stuck in THREAD_STOPPED
state, even though from the user's perspective, the thread is running
even while it is paused.
From inspection, in the current sources, this can happen if we call
stop_and_resume_callback, though there's no way to test that with
current Linux kernels.
(While trying to come up with test to exercise this, I stumbled on:
https://sourceware.org/ml/gdb-patches/2015-03/msg00850.html
... which does include a non-trivial test, so I think I can still
claim I come out net positive. :-) )
Tested on x86_64 Fedora 20.
gdb/ChangeLog:
2015-04-01 Pedro Alves <palves@redhat.com>
* linux-nat.c (linux_handle_extended_wait): Always call set_running.
On GNU/Linux, if the target reuses the TID of a thread that GDB still
has in its list marked as THREAD_EXITED, GDB crashes, like:
(gdb) continue
Continuing.
src/gdb/thread.c:789: internal-error: set_running: Assertion `tp->state != THREAD_EXITED' failed.
A problem internal to GDB has been detected,
further debugging may prove unreliable.
Quit this debugging session? (y or n) FAIL: gdb.threads/tid-reuse.exp: continue to breakpoint: after_reuse_time (GDB internal error)
Here:
(top-gdb) bt
#0 internal_error (file=0x953dd8 "src/gdb/thread.c", line=789, fmt=0x953da0 "%s: Assertion `%s' failed.")
at src/gdb/common/errors.c:54
#1 0x0000000000638514 in set_running (ptid=..., running=1) at src/gdb/thread.c:789
#2 0x00000000004bda42 in linux_handle_extended_wait (lp=0x16f5760, status=0, stopping=0) at src/gdb/linux-nat.c:2114
#3 0x00000000004bfa24 in linux_nat_filter_event (lwpid=20570, status=198015) at src/gdb/linux-nat.c:3127
#4 0x00000000004c070e in linux_nat_wait_1 (ops=0xe193d0, ptid=..., ourstatus=0x7fffffffd2c0, target_options=1) at src/gdb/linux-nat.c:3478
#5 0x00000000004c1015 in linux_nat_wait (ops=0xe193d0, ptid=..., ourstatus=0x7fffffffd2c0, target_options=1) at src/gdb/linux-nat.c:3722
#6 0x00000000004c92d2 in thread_db_wait (ops=0xd80b60 <thread_db_ops>, ptid=..., ourstatus=0x7fffffffd2c0, options=1)
at src/gdb/linux-thread-db.c:1525
#7 0x000000000066db43 in delegate_wait (self=0xd80b60 <thread_db_ops>, arg1=..., arg2=0x7fffffffd2c0, arg3=1) at src/gdb/target-delegates.c:116
#8 0x000000000067e54b in target_wait (ptid=..., status=0x7fffffffd2c0, options=1) at src/gdb/target.c:2206
#9 0x0000000000625111 in fetch_inferior_event (client_data=0x0) at src/gdb/infrun.c:3275
#10 0x0000000000648a3b in inferior_event_handler (event_type=INF_REG_EVENT, client_data=0x0) at src/gdb/inf-loop.c:56
#11 0x00000000004c2ecb in handle_target_event (error=0, client_data=0x0) at src/gdb/linux-nat.c:4655
I managed to come up with a test that reliably reproduces this. It
spawns enough threads for the pid number space to wrap around, so
could potentially take a while. On my box that's 4 seconds; on
gcc110, a PPC box which has max_pid set to 65536, it's over 10
seconds. So I made the test compute how long that would take, and cap
the time waited if it would be unreasonably long.
Tested on x86_64 Fedora 20.
gdb/ChangeLog:
2015-04-01 Pedro Alves <palves@redhat.com>
* linux-thread-db.c (record_thread): Readd the thread to gdb's
list if it was marked exited.
gdb/testsuite/ChangeLog:
2015-04-01 Pedro Alves <palves@redhat.com>
* gdb.threads/tid-reuse.c: New file.
* gdb.threads/tid-reuse.exp: New file.
Some early revisions of the Cortex-A53 have an erratum (843419). The
details of the erratum are quite complex and involve dynamic
conditions. For the purposes of the workaround we have simplified the
static conditions to an ADRP in the last two instructions of a 4KByte
page, followed within four instructions by a load/store dependent on
the ADRP.
This patch adds support to conservatively scan for and workaround
Cortex A53 erratum 843419. There are two different workaround
strategies used. The first is to rewrite ADRP instructions which form
part of an erratum sequence with an ADR instruction. In situations
where the ADR provides insufficient offset the dependent load or store
instruction from the sequence is moved to a stub section and branches
are inserted from the original sequence to the relocated instruction
and back again.
Stub section sizes are rounded up to a multiple of 4096 in order to
ensure that the act of inserting work around stubs does not create
more errata sequences.
Workaround stubs are always inserted into the stub section associated
with the input section containing the erratum sequence. This ensures
that the fully relocated form of the veneered load store instruction
is available at the point in time when the stub section is written.
The top level configure supports --with-system-zlib. This patch makes
configure --help to display --with-system-zlib.
* configure.ac: Add --with-system-zlib.
* configure: Regenerated.
