If gdb_proc_service.h ends up including linux/elf.h, we'll trip on
duplicate definitions:
In file included from ../../../gdb/gdbserver/linux-x86-low.c:29:0:
../../../gdb/gdbserver/../../include/elf/common.h:36:0: error: "ELFMAG0"
redefined [-Werror]
... etc ...
Handle this the same way linux-low.c and linux-arm-low.c handle this.
gdb/gdbserver/
2014-01-17 Pedro Alves <palves@redhat.com>
PR PR16445
* linux-x86-low.c (linux-x86-low.c): Don't include elf/common.h if
ELFMAG0 is defined after including gdb_proc_service.h.
This patch rearranges struct value a tiny bit, moving the "regnum"
field into a hole. This saves 8 bytes per value on a 64-bit machine,
and 4 bytes per value on a 32 bit machine. I think it does not
negatively affect readability or performance.
Built and regtested on x86-64 Fedora 18.
2014-01-16 Tom Tromey <tromey@redhat.com>
* value.c (struct value) <regnum>: Move earlier.
I noticed that extended_remote_create_inferior_1 is called from a
single spot. This patch unifies the callee and caller. It's just a
simple cleanup that made the coming refactoring simpler.
2014-01-16 Tom Tromey <tromey@redhat.com>
* remote.c (extended_remote_create_inferior): Rename from
extended_remote_create_inferior_1. Add "ops" argument. Remove
old implementation.
The test fails on s390 with:
-trace-find frame-number 0^M
&"PC not available\n"^M
^done,found="1",tracepoint="1",traceframe="0",frame={level="-1",addr="<unavailable>",func="??",args=[]}^M
(gdb) ^M
FAIL: gdb.trace/mi-traceframe-changed.exp: tfile: -trace-find frame-number 0
tfile knows to infer the PC from the tracepoint's address if the PC
wasn't collected (tfile_fetch_registers) but, that only works on
targets whose PC register is a raw register, and on s390, the PC
register is a pseudo register.
But even if GDB doesn't know how to infer the value of PC, saying the
current frame is level -1 is a bug:
^done,found="1",tracepoint="1",traceframe="0",frame={level="-1",addr="<unavailable>",func="??",args=[]}^M
^^^^^^^^^
'-1' is the level of the sentinel frame, which should never be visible.
This is caused by the s390's heuristic unwinder accepting the frame
(the fallback heuristic unwinders _always_ accept the frame), but then
the unwind->this_id method throws that "PC not available\n" error.
IOW, the s390's heuristic unwinder was never adjusted to handle
unavailable register values gracefully, which can happen with e.g., a
trimmed core file too.
This is just the minimal necessary for
<unavailable> frames, which at least gets us:
(gdb) tfind
Found trace frame 0, tracepoint 1
#0 <unavailable> in ?? ()
That is, frame #0 instead of -1.
We could get better info out of "info frame" (this patch makes us show
"outermost"), but this change would still be necessary.
gdb/
2014-01-16 Pedro Alves <palves@redhat.com>
* s390-linux-tdep.c (s390_frame_unwind_cache): Swallow
NOT_AVAILABLE_ERROR errors while parsing the prologue or reading
the backchain.
Provide to_resume and to_wait target methods for the btrace record target
to allow reverse stepping and replay support.
Replay is limited in the sense that only stepping and source correlation
are supported. We do not record data and thus can not show variables.
Non-stop mode is not working. Do not allow record-btrace in non-stop mode.
2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
* btrace.h (btrace_thread_flag): New.
(struct btrace_thread_info) <flags>: New.
* record-btrace.c (record_btrace_resume_thread)
(record_btrace_find_thread_to_move, btrace_step_no_history)
(btrace_step_stopped, record_btrace_start_replaying)
(record_btrace_step_thread, record_btrace_decr_pc_after_break)
(record_btrace_find_resume_thread): New.
(record_btrace_resume, record_btrace_wait): Extend.
(record_btrace_can_execute_reverse): New.
(record_btrace_open): Fail in non-stop mode.
(record_btrace_set_replay): Split into this, ...
(record_btrace_stop_replaying): ... this, ...
(record_btrace_clear_histories): ... and this.
(init_record_btrace_ops): Init to_can_execute_reverse.
* NEWS: Announce it.
testsuite/
* gdb.btrace/delta.exp: Check reverse stepi.
* gdb.btrace/tailcall.exp: Update. Add stepping tests.
* gdb.btrace/finish.exp: New.
* gdb.btrace/next.exp: New.
* gdb.btrace/nexti.exp: New.
* gdb.btrace/record_goto.c: Add comments.
* gdb.btrace/step.exp: New.
* gdb.btrace/stepi.exp: New.
* gdb.btrace/multi-thread-step.c: New.
* gdb.btrace/multi-thread-step.exp: New.
* gdb.btrace/rn-dl-bind.c: New.
* gdb.btrace/rn-dl-bind.exp: New.
* gdb.btrace/data.c: New.
* gdb.btrace/data.exp: New.
* gdb.btrace/Makefile.in (EXECUTABLES): Add new.
doc/
* gdb.texinfo: Document limited reverse/replay support
for target record-btrace.
The btrace record target shows the branch trace from the location of the first
branch destination. This is the first BTS records.
After adding incremental updates, we can now add a dummy record for the current
PC when we enable tracing so we show the trace from the location where branch
tracing has been enabled.
2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
* btrace.c: Include regcache.h.
(btrace_add_pc): New.
(btrace_enable): Call btrace_add_pc.
(btrace_is_empty): New.
* btrace.h (btrace_is_empty): New.
* record-btrace.c (require_btrace, record_btrace_info): Call
btrace_is_empty.
testsuite/
* gdb.btrace/Makefile.in (EXECUTABLES): Add delta.
* gdb.btrace/exception.exp: Update.
* gdb.btrace/instruction_history.exp: Update.
* gdb.btrace/record_goto.exp: Update.
* gdb.btrace/tailcall.exp: Update.
* gdb.btrace/unknown_functions.exp: Update.
* gdb.btrace/delta.exp: New.
Read branch trace data incrementally and extend the current trace rather than
discarding it and reading the entire trace buffer each time.
If the branch trace buffer overflowed, we can't extend the current trace so we
discard it and start anew by reading the entire branch trace buffer.
2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
* common/linux-btrace.c (perf_event_read_bts, linux_read_btrace):
Support delta reads.
(linux_disable_btrace): Change return type.
* common/linux-btrace.h (linux_read_btrace): Change parameters
and return type to allow error reporting. Update users.
(linux_disable_btrace): Change return type. Update users.
* common/btrace-common.h (btrace_read_type) <BTRACE_READ_DELTA>:
New.
(btrace_error): New.
(btrace_block) <begin>: Comment on BEGIN == 0.
* btrace.c (btrace_compute_ftrace): Start from the end of
the current trace.
(btrace_stitch_trace, btrace_clear_history): New.
(btrace_fetch): Read delta trace, return if replaying.
(btrace_clear): Move clear history code to btrace_clear_history.
(parse_xml_btrace): Throw an error if parsing failed.
* target.h (struct target_ops) <to_read_btrace>: Change parameters
and return type to allow error reporting.
(target_read_btrace): Change parameters and return type to allow
error reporting.
* target.c (target_read_btrace): Update.
* remote.c (remote_read_btrace): Support delta reads. Pass
errors on.
* NEWS: Announce it.
gdbserver/
* target.h (target_ops) <read_btrace>: Change parameters and
return type to allow error reporting.
* server.c (handle_qxfer_btrace): Support delta reads. Pass
trace reading errors on.
* linux-low.c (linux_low_read_btrace): Pass trace reading
errors on.
(linux_low_disable_btrace): New.
Extend the always failing unwinder to provide the PC based on the call
structure detected in the branch trace.
The unwinder supports normal frames and tailcall frames.
Inline frames are not supported.
2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
* record.h (record_btrace_frame_unwind)
(record_btrace_tailcall_frame_unwind): New declarations.
* dwarf2-frame: Include record.h
(dwarf2_frame_cfa): Throw an error for btrace frames.
* record-btrace.c: Include hashtab.h.
(btrace_get_bfun_name): New.
(btrace_call_history): Call btrace_get_bfun_name.
(struct btrace_frame_cache): New.
(bfcache): New.
(bfcache_hash, bfcache_eq, bfcache_new): New.
(btrace_get_frame_function): New.
(record_btrace_frame_unwind_stop_reason): Allow unwinding.
(record_btrace_frame_this_id): Compute own id.
(record_btrace_frame_prev_register): Provide PC, throw_error
for all other registers.
(record_btrace_frame_sniffer): Detect btrace frames.
(record_btrace_tailcall_frame_sniffer): New.
(record_btrace_frame_dealloc_cache): New.
(record_btrace_frame_unwind): Add new functions.
(record_btrace_tailcall_frame_unwind): New.
(_initialize_record_btrace): Allocate cache.
* btrace.c (btrace_clear): Call reinit_frame_cache.
* NEWS: Announce it.
testsuite/
* gdb.btrace/record_goto.exp: Add backtrace test.
* gdb.btrace/tailcall.exp: Add backtrace test.
The "info threads" command tries to read memory, which is not possible during
replay. This results in an error message and aborts the command without showing
the existing threads.
Provide a to_find_new_threads target method to skip the search while replaying.
2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
* record-btrace.c (record_btrace_find_new_threads)
(record_btrace_thread_alive): New.
(init_record_btrace_ops): Initialize to_find_new_threads and
to_thread_alive.
Add simple to_wait and to_resume target methods that prevent stepping when the
current replay position is not at the end of the execution log.
2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
* record-btrace.c (record_btrace_resume): New.
(record_btrace_wait): New.
(init_record_btrace_ops): Initialize to_wait and to_resume.
Provide the xfer_partial target method for the btrace record target.
Only allow memory read accesses to readonly memory while we're replaying,
except for inserting and removing breakpoints.
2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
* record-btrace.c (record_btrace_xfer_partial)
(record_btrace_insert_breakpoint, record_btrace_remove_breakpoint)
(record_btrace_allow_memory_access): New.
(init_record_btrace_ops): Initialize new methods.
* target.c (raw_memory_xfer_partial): Bail out if target reports
that this memory is not available.
Supply a target-specific frame unwinder for the record-btrace target that does
not allow unwinding while replaying.
2013-02-11 Jan Kratochvil <jan.kratochvil@redhat.com>
Markus Metzger <markus.t.metzger@intel.com>
gdb/
* record-btrace.c: Include frame-unwind.h.
(record_btrace_frame_unwind_stop_reason)
(record_btrace_frame_this_id, record_btrace_frame_prev_register)
(record_btrace_frame_sniffer, record_btrace_frame_unwind):
New.
(init_record_btrace_ops): Install it.
In get_frame_unwind_stop_reason, remove the assumption that further frame
unwinding will succeed.
gdb/
2013-02-11 Jan Kratochvil <jan.kratochvil@redhat.com>
* frame.c (get_frame_unwind_stop_reason): Unconditionally call
get_prev_frame_1.
Swap the unwind stop reason check and the unwinder check to allow
non-dwarf2 frame types to fail with a recoverable error.
gdb/
2013-02-11 Jan Kratochvil <jan.kratochvil@redhat.com>
* dwarf2-frame.c (dwarf2_frame_cfa): Move UNWIND_UNAVAILABLE check
earlier.
Allow targets to supply their own target-specific frame unwinders; one for
normal frames and one for tailcall frames. If a target-specific unwinder
is supplied, it will be chosen before any other unwinder.
The original patch has been split into this and the next two patches.
gdb/
2013-02-11 Jan Kratochvil <jan.kratochvil@redhat.com>
* frame-unwind.c: Include target.h.
(frame_unwind_try_unwinder): New function with code from ...
(frame_unwind_find_by_frame): ... here. New variable
unwinder_from_target, call also target_get_unwinder)
(target_get_tailcall_unwinder, and frame_unwind_try_unwinder for it.
* target.c (target_get_unwinder, target_get_tailcall_unwinder): New.
* target.h (struct target_ops): New fields to_get_unwinder and
to_get_tailcall_unwinder.
(target_get_unwinder, target_get_tailcall_unwinder): New declarations.
Add a branch trace instruction iterator pointing to the current replay position
to the branch trace thread info struct.
Free the iterator when btrace is cleared.
Start at the replay position for the instruction and function-call histories.
2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
* btrace.h (replay) <replay>: New.
(btrace_is_replaying): New.
* btrace.c (btrace_clear): Free replay iterator.
(btrace_is_replaying): New.
* record-btrace.c (record_btrace_is_replaying): New.
(record_btrace_info): Print insn number if replaying.
(record_btrace_insn_history): Start at replay position.
(record_btrace_call_history): Start at replay position.
(init_record_btrace_ops): Init to_record_is_replaying.
The "record function-call-history" and "record instruction-history" commands
accept a range "begin, end". End is not included in both cases. Include it.
2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
* record-btrace.c (record_btrace_insn_history_range): Include
end.
(record_btrace_insn_history_from): Adjust range.
(record_btrace_call_history_range): Include
end.
(record_btrace_call_history_from): Adjust range.
* NEWS: Announce changes.
testsuite/
* gdb.btrace/function_call_history.exp: Update tests.
* gdb.btrace/instruction_history.exp: Update tests.
doc/
* gdb.texinfo (Process Record and Replay): Update documentation.
Add a new modifier /c to the "record function-call-history" command to
indent the function name based on its depth in the call stack.
Also reorder the optional fields to have the indentation at the very beginning.
Prefix the insn range (/i modifier) with "inst ".
Prefix the source line (/l modifier) with "at ".
Change the range syntax from "begin-end" to "begin,end" to allow copy&paste to
the "record instruction-history" and "list" commands.
Adjust the respective tests and add new tests for the /c modifier.
2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
* record.h (enum record_print_flag)
<record_print_indent_calls>: New.
* record.c (get_call_history_modifiers): Recognize /c modifier.
(_initialize_record): Document /c modifier.
* record-btrace.c (btrace_call_history): Add btinfo parameter.
Reorder fields. Optionally indent the function name. Update
all users.
* NEWS: Announce changes.
testsuite/
* gdb.btrace/function_call_history.exp: Fix expected field
order for "record function-call-history".
Add new tests for "record function-call-history /c".
* gdb.btrace/exception.cc: New.
* gdb.btrace/exception.exp: New.
* gdb.btrace/tailcall.exp: New.
* gdb.btrace/x86-tailcall.S: New.
* gdb.btrace/x86-tailcall.c: New.
* gdb.btrace/unknown_functions.c: New.
* gdb.btrace/unknown_functions.exp: New.
* gdb.btrace/Makefile.in (EXECUTABLES): Add new.
doc/
* gdb.texinfo (Process Record and Replay): Document new /c
modifier accepted by "record function-call-history".
Add /i modifier to "record function-call-history" example.
Try to allocate as much buffer as we can for each thread with a maximum
of 64KB.
2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
* common/linux-btrace.c (linux_enable_btrace): Enlarge buffer.
The record instruction-history and record-function-call-history commands start
counting instructions at zero. This is somewhat unintuitive when we start
navigating in the recorded instruction history. Start at one, instead.
2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
* btrace.c (ftrace_new_function): Start counting at one.
* record-btrace.c (record_btrace_info): Adjust number of calls
and insns.
* NEWS: Announce it.
testsuite/
* gdb.btrace/instruction_history.exp: Update.
* gdb.btrace/function_call_history.exp: Update.
With the "/i" modifier, we print the instruction number range in the
"record function-call-history" command as [begin, end).
It would be more intuitive if we printed the range as [begin, end].
2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
* record-btrace.c (btrace_call_history_insn_range): Print
insn range as [begin, end].
The branch trace is represented as 3 vectors:
- a block vector
- a instruction vector
- a function vector
Each vector (except for the first) is computed from the one above.
Change this into a graph where a node represents a sequence of instructions
belonging to the same function and where we have three types of edges to connect
the function segments:
- control flow
- same function (instance)
- call stack
This allows us to navigate in the branch trace. We will need this for "record
goto" and reverse execution.
This patch introduces the data structure and computes the control flow edges.
It also introduces iterator structs to simplify iterating over the branch trace
in control-flow order.
It also fixes PR gdb/15240 since now recursive calls are handled correctly.
Fix the test that got the number of expected fib instances and also the
function numbers wrong.
The current instruction had been part of the branch trace. This will look odd
once we start support for reverse execution. Remove it. We still keep it in
the trace itself to allow extending the branch trace more easily in the future.
2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
* btrace.h (struct btrace_func_link): New.
(enum btrace_function_flag): New.
(struct btrace_inst): Rename to ...
(struct btrace_insn): ...this. Update all users.
(struct btrace_func) <ibegin, iend>: Remove.
(struct btrace_func_link): New.
(struct btrace_func): Rename to ...
(struct btrace_function): ...this. Update all users.
(struct btrace_function) <segment, flow, up, insn, insn_offset)
(number, level, flags>: New.
(struct btrace_insn_iterator): Rename to ...
(struct btrace_insn_history): ...this.
Update all users.
(struct btrace_insn_iterator, btrace_call_iterator): New.
(struct btrace_target_info) <btrace, itrace, ftrace>: Remove.
(struct btrace_target_info) <begin, end, level>
<insn_history, call_history>: New.
(btrace_insn_get, btrace_insn_number, btrace_insn_begin)
(btrace_insn_end, btrace_insn_prev, btrace_insn_next)
(btrace_insn_cmp, btrace_find_insn_by_number, btrace_call_get)
(btrace_call_number, btrace_call_begin, btrace_call_end)
(btrace_call_prev, btrace_call_next, btrace_call_cmp)
(btrace_find_function_by_number, btrace_set_insn_history)
(btrace_set_call_history): New.
* btrace.c (btrace_init_insn_iterator)
(btrace_init_func_iterator, compute_itrace): Remove.
(ftrace_print_function_name, ftrace_print_filename)
(ftrace_skip_file): Change
parameter to const.
(ftrace_init_func): Remove.
(ftrace_debug): Use new btrace_function fields.
(ftrace_function_switched): Also consider gaining and
losing symbol information).
(ftrace_print_insn_addr, ftrace_new_call, ftrace_new_return)
(ftrace_new_switch, ftrace_find_caller, ftrace_new_function)
(ftrace_update_caller, ftrace_fixup_caller, ftrace_new_tailcall):
New.
(ftrace_new_function): Move. Remove debug print.
(ftrace_update_lines, ftrace_update_insns): New.
(ftrace_update_function): Check for call, ret, and jump.
(compute_ftrace): Renamed to ...
(btrace_compute_ftrace): ...this. Rewritten to compute call
stack.
(btrace_fetch, btrace_clear): Updated.
(btrace_insn_get, btrace_insn_number, btrace_insn_begin)
(btrace_insn_end, btrace_insn_prev, btrace_insn_next)
(btrace_insn_cmp, btrace_find_insn_by_number, btrace_call_get)
(btrace_call_number, btrace_call_begin, btrace_call_end)
(btrace_call_prev, btrace_call_next, btrace_call_cmp)
(btrace_find_function_by_number, btrace_set_insn_history)
(btrace_set_call_history): New.
* record-btrace.c (require_btrace): Use new btrace thread
info fields.
(record_btrace_info, btrace_insn_history)
(record_btrace_insn_history, record_btrace_insn_history_range):
Use new btrace thread info fields and new iterator.
(btrace_func_history_src_line): Rename to ...
(btrace_call_history_src_line): ...this. Use new btrace
thread info fields.
(btrace_func_history): Rename to ...
(btrace_call_history): ...this. Use new btrace thread info
fields and new iterator.
(record_btrace_call_history, record_btrace_call_history_range):
Use new btrace thread info fields and new iterator.
testsuite/
* gdb.btrace/function_call_history.exp: Fix expected function
trace.
* gdb.btrace/instruction_history.exp: Initialize traced.
Remove traced_functions.
Add a function to build a frame_id for a frame with unavailable stack
and with a special identifier address.
2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
* frame.h (frame_id_build_unavailable_stack_special): New.
* frame.c (frame_id_build_unavailable_stack_special): New.
Add new methods to gdbarch for analyzing the instruction at a given address.
Implement those methods for i386 and amd64 architectures.
This is needed by "record btrace" to detect function calls in the
execution trace.
2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
* amd64-tdep.c (amd64_classify_insn_at, amd64_insn_is_call)
(amd64_insn_is_ret, amd64_insn_is_jump, amd64_jmp_p): New.
(amd64_init_abi): Add insn_is_call, insn_is_ret, and insn_is_jump
to gdbarch.
* i386-tdep.c (i386_insn_is_call, i386_insn_is_ret)
(i386_insn_is_jump, i386_jmp_p): New.
(i386_gdbarch_init): Add insn_is_call, insn_is_ret, and
insn_is_jump to gdbarch.
* gdbarch.sh (insn_is_call, insn_is_ret, insn_is_jump): New.
* gdbarch.h: Regenerated.
* gdbarch.c: Regenerated.
* arch-utils.h (default_insn_is_call, default_insn_is_ret)
(default_insn_is_jump): New.
* arch-utils.c (default_insn_is_call, default_insn_is_ret)
(default_insn_is_jump): New.
When it takes more than one iteration to read the BTS trace, the trace from the
previous iteration is leaked. Fix it.
2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
* common/linux-btrace.c (linux_read_btrace): Free trace from
previous iteration.
For testing multi-line test output, gdb.btrace tests used the following
pattern:
gdb_test "..." "
...\r
..."
Change this to:
gdb_test "..." [join [list \
"..." \
"..."] "\r\n"]
Also extract repeated tests into a test function and shorten or remove
test messages.
2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
testsuite/
* gdb.btrace/function_call_history.exp: Update
* gdb.btrace/instruction_history.exp: Update.
The error message for starting recording twice changed.
Update the expected text to fix resulting regressions.
2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
* gdb.btrace/enable.exp: Update expected text.
This test currently fails on ARM:
(gdb) PASS: gdb.dwarf2/dw2-dos-drive.exp: set breakpoint pending off
break 'z:file.c':func
Cannot access memory at address 0x0
The error is GDB trying to read the prologue at the breakpoint's
address, and failing:
38 throw_error() exceptions.c:444 0x0016728c
37 memory_error() corefile.c:204 0x001d1fcc
36 read_memory() corefile.c:223 0x001d201a
35 read_memory_unsigned_integer() corefile.c:312 0x001d2166
34 arm_skip_prologue() arm-tdep.c:1452 0x00054270
static CORE_ADDR
arm_skip_prologue (struct gdbarch *gdbarch, CORE_ADDR pc)
{
...
for (skip_pc = pc; skip_pc < limit_pc; skip_pc += 4)
{
inst = read_memory_unsigned_integer (skip_pc, 4, byte_order_for_code);
The test doesn't execute the compiled object's code, so GDB will try
to read memory from the binary's sections. Instructions on ARM are
4-byte wide, and thus ARM's prologue scanner reads in 4-byte chunks.
As the section 'func' is put at is only 1 byte long, and no other
section is allocated contiguously:
...
Sections:
Idx Name Size VMA LMA File off Algn
0 .text 00000001 00000000 00000000 00000034 2**0
CONTENTS, ALLOC, LOAD, READONLY, CODE
...
... the exec target fails the read the 4 bytes.
Fix this by increasing the function's size.
gdb/testsuite/ChangeLog:
2014-01-16 Omair Javaid <Omair.Javaid@linaro.org>
* gdb.dwarf2/dw2-dos-drive.S: Increase text section size to 4
bytes.
On Linux/x86-64, when binutils is configured with --libdir=/usr/lib64,
genscripts.sh treats /usr/lib64 as the default search directory. It
puts /usr/lib64 in linker scripts for all emulations, like
---
/* Script for -z combreloc: combine and sort reloc sections */
OUTPUT_FORMAT("elf32-i386", "elf32-i386",
"elf32-i386")
OUTPUT_ARCH(i386)
ENTRY(_start)
SEARCH_DIR("/usr/x86_64-redhat-linux/lib32");
SEARCH_DIR("/usr/i386-redhat-linux/lib32"); SEARCH_DIR("/usr/lib6432");
SEARCH_DIR("/usr/local/lib32"); SEARCH_DIR("/lib32");
SEARCH_DIR("/usr/lib32"); SEARCH_DIR("/usr/i386-redhat-linux/lib");
SEARCH_DIR("/usr/lib64"); SEARCH_DIR("/usr/local/lib");
SEARCH_DIR("/lib"); SEARCH_DIR("/usr/lib");
---
/usr/lib6432 is odd and /usr/lib64 is wrong. This patch changes
genscripts.sh to check LIBPATH_SUFFIX_SKIP if it is defined. It
skips directories with LIBPATH_SUFFIX_SKIP suffix.
PR ld/16456
* genscripts.sh: Don't search directory with LIBPATH_SUFFIX_SKIP
suffix.
* emulparams/elf32_x86_64.sh (LIBPATH_SUFFIX_SKIP): Set to 64
for elf32_x86_64 emulation.
* emulparams/elf_i386.sh (LIBPATH_SUFFIX_SKIP): Set to 64
for elf_i386 emulation.
A long time ago ld made use of userdata to tie an output section to
its lang_input_statement_struct object file. Some time later Joern
made map file printing of symbols at lot faster, using userdata on
input sections. That complicated allocation of userdata, and when the
output section use disappeared a year later, the code wasn't properly
cleaned up. This patch does that cleanup, and also tidies the symbol
printing code to not allocate userdata where it won't be needed. We
don't print symbols defined in the absolute section or in output
sections.
* ld.h (fat_section_userdata_type, get_userdata): Move to..
* ldlang.h (input_section_userdata_type, get_userdata): ..here.
* ldlang.c (init_map_userdata): Delete. Fold into..
(sort_def_symbol): ..here. Don't attach input section userdata
to output sections or global bfd sections.
(lang_map): Don't pre-allocate input section userdata.
(init_os): Don't allocate userdata for output sections.
(print_all_symbols): Update.
When a symbol is absolute, this code in mips_elf_record_got_page_entry
entry = bfd_zalloc (sec->owner, sizeof (*entry));
segfaults. sec == bfd_abs_section_ptr and sec->owner == NULL.
* elfxx-mips.c (mips_elf_record_got_page_entry): Pass in a
mips_elf_traverse_got_arg* rather than mips_got_info*.
Adjust caller. Alloc on output_bfd rather than symbol section
owner.
This adds the "main"-related data into the per-BFD. This is needed
because once symbol sharing across objfiles is complete, computing the
main name as a side effect of symbol reading will no longer work --
the symbols simply won't be re-read.
After this change, set_main_name is only used by the main_name
machinery itself, so this patch makes it static.
2014-01-15 Tom Tromey <tromey@redhat.com>
* dbxread.c (process_one_symbol): Use set_objfile_main_name.
* dwarf2read.c (read_partial_die): Use set_objfile_main_name.
* objfiles.c (get_objfile_bfd_data): Initialize language_of_main.
(set_objfile_main_name): New function.
* objfiles.h (struct objfile_per_bfd_storage) <name_of_main,
language_of_main>: New fields.
(set_objfile_main_name): Declare.
* symtab.c (find_main_name): Loop over objfiles to find the main
name and language.
(set_main_name): Now static.
(get_main_info): Add comment.
* symtab.h (set_main_name): Don't declare.
This moves the "main" name and language into an object attached to the
current progspace. This prevents problems if there are multiple
inferiors tha have different ideas of "main" -- which matters at least
for unwinding, see frame.c:inside_main_func.
2014-01-15 Tom Tromey <tromey@redhat.com>
* symtab.c (main_progspace_key): New global.
(struct main_info): New.
(name_of_main, language_of_main): Remove.
(get_main_info, main_info_cleanup): New function.
(set_main_name, main_name, main_language): Use get_main_info.
(_initialize_symtab): Initialize main_progspace_key.
This makes the global language_of_main static. Now it can be set only
via a new argument to set_main_name.
2014-01-15 Tom Tromey <tromey@redhat.com>
* dbxread.c (process_one_symbol): Update.
* dwarf2read.c (read_partial_die): Update.
* symfile.c (set_initial_language): Call main_language.
* symtab.c (language_of_main): Now static.
(set_main_name): Add 'lang' parameter.
(find_main_name): Update.
(main_language): New function.
(symtab_observer_executable_changed): Update.
* symtab.h (set_main_name): Update.
(language_of_main): Remove.
(main_language): Declare.
