2005-07-01 Jan Beulich <jbeulich@novell.com>
* config/tc-ia64.c (line_separator_chars): Add '{' and '}'.
(output_spill_psprel, output_spill_psprel_p): Combine.
(output_spill_sprel, output_spill_sprel_p): Combine.
(output_spill_reg, output_spill_regp_p): Combine.
(process_one_record): Handle psp_psprel.
(parse_predicate_and_operand): New.
(convert_expr_to_ab_reg): Two new parameters. Return void. Always
initialize output values. Emit diagnostic case here.
(convert_expr_to_xy_reg): Likewise. Don't allow r0, f0, and f1.
(add_unwind_entry): New second parameter. Allow first parameter to
be NULL. Parse optional tag, emit warning about further support for
it otherwise being missing. Check end-of-line when requested.
(dot_fframe): Clear operand when wrong. Allow tag.
(dot_vframe): Likewise.
(dot_vframesp): Likewise. Rename parameter, issue warning when psp
relative.
(dot_vframepsp): Remove.
(dot_altrp): Clear operand when wrong. Allow tag.
(dot_save): Likewise. Let default case also go through
add_unwind_entry.
(dot_savemem): Likewise.
(dot_restore): Don't return when wrong operand. Allow tag.
(dot_spillreg, dot_spillreg_p): Combine. Simplify by using
parse_predicate_and_operand and the new arguments to
convert_expr_to_ab_reg and convert_expr_to_xy_reg. Don't return
when wrong operand. Allow tag.
(dot_restorereg, dot_restorereg_p): Likewise.
(dot_spillmem, dot_spillmem_p): Likewise.
(dot_saveg): Clear operand when wrong. Perform tighter operand
checks. Allow tag.
(dot_savef): Likewise.
(dot_saveb): Likewise.
(dot_savegf): Likewise.
(dot_spill): Remove end-of-line check. Combine. Simplify by using
parse_predicate_and_operand and the new arguments to
convert_expr_to_ab_reg and convert_expr_to_xy_reg. Don't return
when wrong operand. Allow tag.
(popcount): New.
(dot_label_state): Don't return when wrong operand.
(dot_copy_state): Likewise.
(dot_unwabi): Likewise. Check if in prologue.
(dot_body): Don't call demand_empty_rest_of_line.
(dot_prologue): Type of mask and grsave is unsigned. Perform tighter
operand checks.
(md_pseudo_table): Also use dot_restorereg for .restorereg.p. Also
use dot_spillreg for .spillreg.p. Also use dot_spillmem for
.spillpsp.p and .spillsp.p. Also use dot_vframesp for .vframepsp.
(parse_operand): New second parameter. Don't deal with '}' here
anymore. Don't advance past end-of-line.
(parse_operands): Pass second argument to parse_operand.
(ia64_start_line): Prevent out-of-bounds access through
input_line_pointer. Deal with '}' here.
(ia64_unrecognized_line): Don't deal with '}' here.
(dot_alias): Use ignore_rest_of_line not its deprecated alias
discard_rest_of_line.
gas/testsuite/
2005-07-01 Jan Beulich <jbeulich@novell.com>
* gas/ia64/group-2.s: Use register as second operand of .prologue.
* gas/ia64/unwind-err.s: Add check for .vframesp.
* gas/ia64/unwind-err.l: Adjust.
* gas/ia64/strange.[sd]: New.
* gas/ia64/unwind-bad.[sl]: New.
* gas/ia64/unwind-ok.[sd]: New.
* gas/ia64/ia64.exp: Run new tests.
* config/tc-arm.c (T_OPCODE_BRANCH, encode_arm_addr_mode_2)
(encode_arm_addr_mode_3, encode_arm_cp_address, do_blx, do_t_blx)
(do_t_branch, insns [b, bl]): Don't encode pipeline offset.
(s_arm_elf_cons): Disallow use of (plt) suffix.
(do_adrl): Adjust X_add_number unconditionally.
(md_pcrel_from): Rename md_pcrel_from_section, add second segT
argument. Handle all adjustment for pipeline offset here.
(md_apply_fix): No need to undo work of md_pcrel_from. No
need to extract pre-encoded pipeline adjustments from various
branch instructions. Generally, assume instructions are already
all-bits-zero in the field being fixed up. Remove all OBJ_ELF
special cases. Handle BFD_RELOC_ARM_PLT32 like
BFD_RELOC_ARM_PCREL_BRANCH.
(tc_gen_reloc): Remove OBJ_ELF special case.
* config/tc-arm.c: Define MD_PCREL_FROM_SECTION.
gas/testsuite:
* gas/arm/arm.exp: Don't special case ldconst, arm7t, or copro
for *-wince-*.
* gas/arm/wince_arm7t.d, gas/arm/wince_copro.d
* gas/arm/wince_ldconst.d: Delete.
2005-06-20 H.J. Lu <hongjiu.lu@intel.com>
PR 1013
* config/tc-i386.c (md_assemble): Don't call optimize_disp on
movabs.
(optimize_disp): Optimize only if possible. Don't use 64bit
displacement on non-constants and do same on constants if
possible.
gas/testsuite/
2005-06-20 H.J. Lu <hongjiu.lu@intel.com>
PR 1013
* i386/x86_64.s: Add absolute 64bit addressing tests for mov.
* i386/x86_64.s: Updated.
include/opcode/
2005-06-20 H.J. Lu <hongjiu.lu@intel.com>
PR 1013
* i386.h (i386_optab): Update comments for 64bit addressing on
mov. Allow 64bit addressing for mov and movq.
2005-06-17 Jan Beulich <jbeulich@novell.com>
* bfd-in2.h (elf_x86_64_reloc_type): Add BFD_RELOC_X86_64_GOTOFF64
and BFD_RELOC_X86_64_GOTPC32.
* libbfd.h (bfd_reloc_code_real_names): Likewise.
* elf64-x86-64.c (x86_64_elf_howto_table): Add entries for
R_X86_64_PC64, R_X86_64_GOTOFF64, and R_X86_64_GOTPC32.
(x86_64_reloc_map): Add entries for R_X86_64_PC64, R_X86_64_GOTOFF64,
and R_X86_64_GOTPC32.
(elf64_x86_64_info_to_howto): Adjust bounding relocation type.
(elf64_x86_64_check_relocs): Also handle R_X86_64_PC64,
R_X86_64_GOTOFF64, and R_X86_64_GOTPC32.
(elf64_x86_64_relocate_section): Likewise.
(elf64_x86_64_gc_sweep_hook): Also handle R_X86_64_PC64.
gas/
2005-06-17 Jan Beulich <jbeulich@novell.com>
* config/tc-i386.c (reloc): Also handle BFD_RELOC_64_PCREL.
(tc_i386_fix_adjustable): Include BFD_RELOC_X86_64_GOTOFF64,
BFD_RELOC_X86_64_DTPOFF64, and BFD_RELOC_X86_64_TPOFF64.
(output_disp): Do GOTPC conversion also for BFD_RELOC_X86_64_32S
and BFD_RELOC_32_PCREL. Use BFD_RELOC_X86_64_GOTPC32 instead of
aborting.
(output_imm): Do GOTPC conversion also for BFD_RELOC_X86_64_32S.
Use BFD_RELOC_X86_64_GOTPC32 instead of aborting.
(tc_gen_reloc): Do GOTPC conversion also for BFD_RELOC_32_PCREL.
Use BFD_RELOC_X86_64_GOTPC32 instead of aborting. Also handle
BFD_RELOC_X86_64_GOTOFF64, BFD_RELOC_X86_64_GOTPC32,
BFD_RELOC_X86_64_DTPOFF64, and BFD_RELOC_X86_64_TPOFF64. Also
convert 8-byte pc-relative relocations.
(lex_got): Use BFD_RELOC_X86_64_GOTOFF64 for 64-bit @gotoff.
(i386_validate_fix): Likewise.
(x86_cons): Also handle quad values in 64-bit mode.
(i386_displacement): Also handle BFD_RELOC_X86_64_GOTOFF64.
(md_apply_fix): Include BFD_RELOC_X86_64_DTPOFF64 and
BFD_RELOC_X86_64_TPOFF64 in the TLS check. Also convert BFD_RELOC_64
to pc-relative variant. Also check for BFD_RELOC_64_PCREL.
gas/testsuite/
2005-06-17 Jan Beulich <jbeulich@novell.com>
* gas/i386/x86-64-pcrel.s: Add insn requiring 64-bit pc-relative
relocation. Add insns for all widths of non-pc-relative relocations.
* gas/i386/x86-64-pcrel.d: Adjust.
include/elf/
2005-06-17 Jan Beulich <jbeulich@novell.com>
* x86-64.h (elf_x86_64_reloc_type): Adjust comment for
R_X86_64_GOTPCREL. Add R_X86_64_PC64, R_X86_64_GOTOFF64, and
R_X86_64_GOTPC32.
* config/tc-arm.c (find_real_start): Check S_IS_LOCAL on
symbolP as well as for names with a leading dot. Use ACONCAT.
(md_apply_fix): For branch relocations, only replace value
with fixP->fx_offset (under #ifdef OBJ_ELF) when !fixP->fx_done.
(arm_force_relocation): Remove #ifdef OBJ_ELF case.
* config/tc-arm.h (LOCAL_LABEL): Remove unnecessary parentheses.
(LOCAL_LABEL_PREFIX): Don't define.
gas/testsuite:
* gas/arm/thumb.s: Only branch to labels defined in this file.
* gas/arm/thumb.d, gas/arm/thumb32.d: Adjust expected output.
* config/tc-m68k.c (m68k_ip): Test for insn compatiblity using a temporary copy
of the operands array so that changes can be safely backed out if the insn
does not match.
(m68k_compare_opcode): Shortcut the test when the parameters are the same.
Return 1 if the names match but the second opcode is further on in the array
than the first.
* config/tc-mips.c (load_register): Add leading "0x" to the
output of sprintf_vma().
(macro): Likewise.
gas/testsuite/:
* gas/mips/ldstla-32-1.l: Update to handle leading zeroes.
* gas/mips/ldstla-32-mips3-1.l: Likewise.
(TC_INIT_FIX_DATA): Initialize to 0, not NULL.
* config/tc-arm.c (fix_new_arm): Remove now-unnecessary cast.
(md_apply_fix3): Delete fix_is_thumb variable; refer to
fixP->tc_fix_data directly in the sole place it was used.
Explicitly truncate value, *valP, fixP->fx_addnumber, and
fixP->fx_offset to 32 bits, for consistent behavior between 32-
and 64-bit hosts.
2005-05-27 Jan Beulich <jbeulich@novell.com>
* config/tc-ia64.c (struct proc_pending): New.
(unwind): Replace proc_start with proc_pending.
(unwind_diagnostic): Check unwind.proc_pending.sym.
(dot_proc): Replace unwind.proc_start with unwind.proc_pending.sym.
Check if previous proc not closed. Record all entry points.
(dot_endp): Replace unwind.proc_start with unwind.proc_pending.sym.
Set symbol sizes for entry points recorded in dot_proc. Check
arguments for consistency with respective .proc's.
(md_assemble): Replace unwind.proc_start with
unwind.proc_pending.sym.
gas/testsuite/
2005-05-27 Jan Beulich <jbeulich@novell.com>
* gas/ia64/proc.l: Adjust.
2005-05-27 Jan Beulich <jbeulich@novell.com>
* config/tc-ia64.c (emit_one_bundle): Restrict scope of ptr, end_ptr,
and last_ptr. Check all in-use slots for first one with non-NULL
unwind_record. Don't reload end_ptr before second update round.
2005-05-25 Jan Beulich <jbeulich@novell.com>
* config/tc-ia64.c (ia64_gen_real_reloc_type): Also handle
BFD_RELOC_UNUSED when determining the width of the reloc.
* gas/Makefile.am: Have 'all' depend on 'info'.
* ld/Makefile.am: Have 'all' depend on 'info' and 'ld.1'.
* bfd/Makefile.in, binutils/Makefile.in, gas/Makefile.in
* ld/Makefile.in: Regenerate.
2005-05-19 Jan Beulich <jbeulich@novell.com>
* config/tc-ia64.c (dot_endp): Don't use global symbol for unwind
relocations in unwind section.
gas/testsuite/
2005-05-19 Jan Beulich <jbeulich@novell.com>
* gas/ia64/reloc-uw.s: New.
* gas/ia64/reloc-uw.d: New.
* gas/ia64/reloc-uw-ilp32.d: New.
* gas/ia64/ia64.exp: Run new test.
* arm.h: Import complete list of official relocation names
and numbers from AAELF. Define FAKE_RELOCs for old names.
Remove a few old names no longer used anywhere.
bfd:
* elf32-arm.c: Wherever possible, use official reloc names
from AAELF.
(elf32_arm_howto_table, elf32_arm_tls_gd32_howto)
(elf32_arm_tls_ldo32_howto, elf32_arm_tls_ldm32_howto)
(elf32_arm_tls_le32_howto, elf32_arm_tls_ie32_howto)
(elf32_arm_vtinherit_howto, elf32_arm_vtentry_howto)
(elf32_arm_pc11_howto, elf32_arm_thm_pc9_howto, elf32_arm_got_prel)
(elf32_arm_r_howto): Replace with elf32_arm_howto_table_1,
elf32_arm_howto_table_2, and elf32_arm_howto_table_3.
Add many new relocations from AAELF.
(elf32_arm_howto_from_type): Update to match.
(elf32_arm_reloc_map): Add entries for R_ARM_THM_JUMP24,
R_ARM_THM_JUMP11, R_ARM_THM_JUMP19, R_ARM_THM_JUMP8,
R_ARM_THM_JUMP6, R_ARM_GNU_VTINHERIT, and R_ARM_GNU_VTENTRY.
(elf32_arm_reloc_type_lookup): Use elf32_arm_howto_from_type.
(elf32_arm_final_link_relocate): Add support for
R_ARM_THM_JUMP24, R_ARM_THM_JUMP19, R_ARM_THM_JUMP6. Remove
case entries redundant with default.
* reloc.c: Reorganize ARM relocations. Add Thumb
assembler-internal relocations BFD_RELOC_ARM_T32_OFFSET_U8,
BFD_RELOC_ARM_T32_OFFSET_IMM, BFD_RELOC_ARM_T32_IMMEDIATE.
Add visible relocations BFD_RELOC_THUMB_PCREL_BRANCH7,
BFD_RELOC_THUMB_BRANCH20, BFD_RELOC_THUMB_BRANCH25.
Delete unused relocations BFD_RELOC_ARM_GOT12, BFD_RELOC_ARM_COPY.
* bfd-in2.h, libbfd.h: Regenerate.
opcodes:
* arm-dis.c (thumb_opcodes): Add disassembly for V6T2 16-bit
instructions. Adjust disassembly of some opcodes to match
unified syntax.
(thumb32_opcodes): New table.
(print_insn_thumb): Rename print_insn_thumb16; don't handle
two-halfword branches here.
(print_insn_thumb32): New function.
(print_insn): Choose among print_insn_arm, print_insn_thumb16,
and print_insn_thumb32. Be consistent about order of
halfwords when printing 32-bit instructions.
gas:
* hash.c (hash_lookup): Add len parameter. All callers changed.
(hash_find_n): New interface.
* hash.h: Prototype hash_find_n.
* sb.c: Include as.h.
(scrub_from_sb, sb_to_scrub, scrub_position): New statics.
(sb_scrub_and_add_sb): New interface.
* sb.h: Prototype sb_scrub_and_add_sb.
* input-scrub.c (input_scrub_include_sb): Use sb_scrub_and_add_sb.
* config/tc-arm.h (TC_FORCE_RELOCATION_LOCAL): Remove
reference to BFD_RELOC_ARM_GOT12 which is never generated.
* config/tc-arm.c: Rewrite, adding Thumb-2 support.
gas/testsuite:
* gas/arm/arm.exp: Convert all existing "gas_test" tests to
"run_dump_test" tests. Run more tests unconditionally. Run new tests.
* gas/arm/arch4t.s, gas/arm/arch6zk.s, gas/arm/arm3.s, gas/arm/arm6.s
* gas/arm/arm7dm.s, gas/arm/bignum1.s, gas/arm/float.s
* gas/arm/immed.s, gas/arm/iwmmxt.s, gas/arm/offset.s, gas/arm/thumb.s:
Adjust to work as a dump test.
* gas/arm/arch4t.d, gas/arm/arch6zk.d, gas/arm/arm3.d, gas/arm/arm6.d
* gas/arm/arm7dm.d, gas/arm/bignum1.d, gas/arm/float.d
* gas/arm/immed.d, gas/arm/iwmmxt.d, gas/arm/offset.d, gas/arm/thumb.d:
New files.
* gas/arm/armv1-bad.l, gas/arm/armv1-bad.s: Remove tests for
diagnostics that don't happen in the first pass anymore.
* gas/arm/iwmmxt-bad.l, gas/arm/r15-bad.l, gas/arm/req.l
* gas/arm/vfp-bad.l:
Update expected diagnostics.
* gas/arm/pic.d: Update expected reloc name.
* gas/arm/thumbv6.d: CPY no longer appears in disassembly.
* gas/arm/r15-bad.s: Avoid two-argument mul.
* gas/arm/req.s: Adjust comments.
* gas/arm/maverick.d, gas/arm/maverick.s: Avoid inappropriate
use of PC.
* gas/arm/macro-1.d, gas/arm/macro1.s
* gas/arm/t16-bad.l, gas/arm/t16-bad.s
* gas/arm/tcompat.d, gas/arm/tcompat.s
* gas/arm/tcompat2.d, gas/arm/tcompat2.s
* gas/arm/thumb32.d, gas/arm/thumb32.s
New test pair.
ld/testsuite:
* ld-arm/mixed-app.d: Adjust expected disassembly a little.
2005-05-17 Jan Beulich <jbeulich@novell.com>
* read.c (_find_end_of_line): New.
(find_end_of_line): New.
(HANDLE_CONDITIONAL_ASSEMBLY): Use it.
(read_a_source_file): Use it.
(s_globl): Use it.
(s_macro): Use it.
(get_line_sb): Use it.
(s_errwarn): Replace discard_rest_of_line by ignore_rest_of_line.
(s_comm_internal): Likewise.
(s_lsym): Likewise.
(s_macro): Likewise.
(s_ignore): Use ignore_rest_of_line.
* read.h (find_end_of_line): Prototype.
(discard_rest_of_line): Remove prototype. #define to
ignore_rest_of_line.
gas/testsuite/
2005-05-17 Jan Beulich <jbeulich@novell.com>
* gas/mmix/err-byte1.s: Adjust expected error text on line 10.
* config/tc-v850.c (md_assemble): When creating a fix record the operand in the
tc_fix_data field.
(md_apply_fix3): When applying a resolved fix use the operand's insertion
procedure to store the value, if the operand has been recorded.
* gas/v850/split-lo16.s: Add test for a lo() pseudo reloc corrupting an ld.w
instruction.
* gas/v850/split-lo16.d: Add expected, correct (ie not corrupt) output.
* frags.c (frag_grow): Don't be too greedy in allocating memory.
* config/tc-hppa.c (pa_block): Check arguments to .block[z].
gas/testsuite/
* gas/hppa/parse/block1.s: Use official limit (0x3fffffff) for
.block.
