(SUBDIR_CLI_SRCS): Add cli/cli-utils.c.
(cli_utils_h): New variable.
(cli/cli-utils.o): New rule.
* cli/cli-utils.c: New file.
* cli/cli-utils.h: New file.
* thread-db.c: Various comment fixes and additions.
Include "bfd.h", "symfile.h" and "objfiles.h".
(keep_thread_db): New variable.
(find_new_threads_callback): Remove prototype.
(thread_db_find_new_threads): New prototype.
(thread_db_push_target, thread_db_unpush_target): Remove
functions.
(deactivate_target): New function.
(thread_db_new_objfile): If OBJFILE == NULL, force deactivation of
target vector. Activate target vector directly instead of calling
thread_db_push_target. Set keep_thread_db if thread library is
detected in the main symbol file. Only enable thread event
reporting if there actually is a child process. Likewise for
detecting new threads, done by calling thread_db_find_new_threads
instead of iterating over the threads ourselves.
(thread_db_detach): Call deactivate_target instead of
thread_db_unpush_target.
(thread_db_wait): Bail out early if we're not debugging the
multi-threaded child process yet.
(thread_db_post_startup_inferior): New function.
(thread_db_mourn_inferior): Call deactivate_target instead of
thread_db_unpush_target.
(init_thread_db_ops): Add thread_db_post_startup_inferior to
thread_db_ops.
(i386_extract_return_value): Return directly after issuing the
warning and filling *VALBUF with zeroes if we cannot get at the
floating-point registers.
(i386_store_return_value): New function.
* config/i386/tm-i386.h (STORE_RETURN_VALUE): Simply call
i386_store_return_value.
Add prototype for i386_store_return_value.
* Makefile.in (UIOUT_CFLAGS): New macro. CFLAGS needed for uiout code
to be compiled. Defines UI_OUT.
(SUBDIR_MI_CFLAGS): Defines MI_OUT, not UI_OUT.
(INTERNAL_WARN_CFLAGS): Also include UIOUT_CFLAGS.
* configure.in (UIOUT_CFLAGS): New configuration variable.
(--with-uiout): New configuration option. Causes uiout code to
be compiled, instead of the old *printf one.
* configure: Regenerate.
* top.c (print_gdb_version): Test for and print MI_OUT, not UI_OUT.
* testsuite/lib/mi-support.exp (mi_gdb_start): Test for MI_OUT,
not UI_OUT.
* complaints.c (complain): Call warning_hook if defined, instead of
writting to gdb_stderr.
(clear_complaints): Do not write anything to gdb_stderr if warning_hook
is defined.
* sh-tdep.c (sh_generic_show_regs, sh3_show_regs, sh3e_show_regs,
sh3_dsp_show_regs, sh4_show_regs, sh_dsp_show_regs): SR_REGNUM is
now part of gdbarch_tdep structure.
(sh_gdbarch_init): Initialize SR_REGNUM.
* config/sh/tm-sh.h (struct gdbarch_tdep): Add field SR_REGNUM.
* sh-tdep.c (sh_do_pseudo_register): Indent properly. Call
do_dr_register_info() only for DR registers.
(sh_sh4_register_name): Add comments with numbers.
(_initialize_sh_tdep): Move assignment to disassemble printing
function from here...
(sh_gdbarch_init):...to here. Move some more general settings to
before the architecture is recognized.
* Makefile.in (CONFIG_LOBS): New macro. Configured to the files
that must be added to the gdblib itself.
(DEPFILES): Use CONFIG_LOBS, not CONFIG_OBS.
(INIT_FILES): Include CONFIG_OBS.
(gdb$(EXEEXT)): Depend on CONFIG_OBS and link with it.
(kdb): Ditto.
* configure.in (CONFIG_LOBS): New variable. Object files that must
be added to gdblib for the specific configuration.
* configure: Regenerate.
* Makefile.in (SUBDIR_GDBTK_OBS, SUBDIR_GDBTK_SRCS,
SUBDIR_GDBTK_DEPS, SUBDIR_GDBTK_INITS, SUBDIR_GDBTK_LDFLAGS,
SUBDIR_GDBTK_CFLAGS): New macros. For gdbtk subdir.
* configure.in: Fix typo. It is CONFIG_OBS not CONFIG_OJS.
Use the SUBDIR_GDBTK_* macros instead of hard coded file names.
* configure: Regenerate.
* configure.in: Fix a couple of typos in the handling of the
enable_gdbcli option. Make it check enableval for the result
of AC_ARG_ENABLE.
* configure: Regenerate.
* dwarf2read.c (DWARF2_REG_TO_REGNUM): New macro. Provide default
definition. Will be used to translate between the compiler's
register numbering and GDB's (for register variables etc).
(new_symbol): Use DWARF2_REG_TO_REGNUM to translate register ids.
* config/sh/tm-sh.h (struct gdbarch_tdep): Rename fields
{FP15,DR14,FV12}_REGNUM to {FP,DR,FV}_LAST_REGNUM.
* sh-tdep.c (sh_sh3e_register_virtual_type,
sh_sh4_register_virtual_type, sh_do_registers_info,
sh_gdbarch_init, sh_sh4_register_byte, sh_sh4_register_raw_size,
sh_sh4_register_convertible, sh_sh4_register_convert_to_virtual,
sh_sh4_register_convert_to_raw, sh_fetch_pseudo_register,
sh_store_pseudo_register, sh_do_pseudo_register): Ditto.
* sh-tdep.c (sh_gdbarch_init): Use a function pointer to set the
disassembly print function.
(_initialize_sh_tdep): Initialize tm_print_insn using the function
pointer.
* config/sh/tm-sh.h (struct gdbarch_tdep): Get rid of
DR{2,4,6,8,10,12}_REGNUM, FV{4,8}_REGNUM, they are not used
anywhere.
* sh-tdep.c (sh_gdbarch_init): Don't initialize
DR{2,4,6,8,10,12}_REGNUM, FV{4,8}_REGNUM.
* m68hc11-tdep.c (m68hc11_frame_args_address): Fix args address
computation.
(m68hc11_frame_init_saved_regs): Frame pointer is saved only if
the symbol exist.
(m68hc11_analyze_instruction): New function.
(m6811_prologue, m6812_prologue): New prologue description tables.
(m68hc11_guess_from_prologue): Use the above.
(m68hc11_gdbarch_init): Setup gdbarch_tdep for the prologue
descriptions.
``fmt''. Make ``offset'' a CORE_ADDR.
(print_unpack): Delete.
(extended_offset): Construct and return a CORE_ADDR.
(fetch_mips_16): Return an int. Don't assume short is 16 bits.
(unpack_mips16): Rewrite. Add ``extension'' parameter instead of
incorrectly guessing if the instruction had an extension.
(map16): Delete array.
(mips16_op): Delete macro.
(extended_mips16_next_pc): Rewrite of old mips16_next_pc function.
When an extended instruction do a recursive call.
(mips16_next_pc): Call extended_mips16_next_pc.
(mips_next_pc): Cleanup.
* cli/cli-decode.c: New file. Handle lists of commands, their decoding
and documentation.
(add_cmd, deprecate_cmd, add_abbrev_cmd, add_alias_cmd, add_prefix_cmd,
add_abbrev_prefix_cmd, not_just_help_class_command, empty_sfunc,
add_set_cmd, add_set_enum_cmd, add_set_auto_boolean_cmd,
add_show_from_set, delete_cmd, apropos_cmd, help_cmd, help_list,
help_all, print_doc_line, help_cmd_list, find_cmd, lookup_cmd_1,
undef_cmd_error, lookup_cmd, deprecated_cmd_warning,
lookup_cmd_composition, complete_on_cmdlist, complete_on_enum):
Moved here from command.c.
(add_info, add_info_alias, add_com, add_com_alias): Moved here from
top.c.
* cli/cli-decode.h: Definitions/declarations for the above.
* cli/cli-cmds.c: New file. GDB CLI commands.
(error_no_arg, info_command, show_command, help_command, show_version,
quit_command, pwd_command, cd_command, echo_command, shell_escape,
make_command, show_user, set_debug, show_debug, init_cmd_lists):
Moved here from top.c.
(apropos_command): Moved here from command.c.
(complete_command, source_command): Moved here (part) from top.c.
(is_complete_command): New function. Checks if a command is the
"complete" command.
(init_cli_cmds): New function. Add commands to the CLI (from code
previously in top.c.
* cli/cli-cmds.h: Definitions/declarations for the above.
* cli/cli-script.c: New file. GDB CLI command scripting.
(build_command_line, get_command_line, print_command_lines,
print_command_line, execute_user_command, execute_control_command,
while_command, if_command, arg_cleanup, setup_user_args, locate_arg,
insert_args, realloc_body_list, read_next_line,
recurse_read_control_structure, read_command_lines, free_command_lines,
do_free_command_lines_cleanup, make_cleanup_free_command_lines,
validate_comname, user_defined_command, define_command,
document_command, source_cleanup_lines, do_fclose_cleanup,
show_user_1): Moved here from top.c.
(script_from_file): New function. Implements execution of a script
contained in a file (part of code for the source_command() that used
to exist in top.c).
* cli/cli-script.h: Definitions/declarations for the above.
* cli/cli-setshow.c: New file. Handle set and show GDB CLI commands.
(parse_auto_binary_operation, parse_binary_operation,
do_setshow_command, cmd_show_list): Moved here from command.c.
* cli/cli-setshow.h: Definitions/declarations for the above.
* top.c: Remove all CLI code, except the command loop.
(gdb_init): Call init_cli_cmds().
* command.c: Remove obsolete file.
* command.h: Mark as DEPRECATED.
* gdbcmd.h: Ditto.
* call-cmds.h: Ditto.
* Makefile.in (SFILES): Remove command.c.
(COMMON_OBS): Remove command.o.
(command.o): Remove obsolete target.
(cli_decode_h, cli_cmds_h, cli_script_h, cli_setshow_h): New macros.
Refer to CLI header files.
(cli-decode.o, cli-cmds.o, cli-setshow.o, cli-script.o): New targets.
(SUBDIR_CLI_OBS, SUBDIR_CLI_SRCS, SUBDIR_CLI_DEPS, SUBDIR_CLI_INITS,
SUBDIR_CLI_LDFLAGS, SUBDIR_CLI_CFLAGS, SUBDIR_CLI_ALL, SUBDIR_CLI_CLEAN,
SUBDIR_CLI_INSTALL, SUBDIR_CLI_UNINSTALL): New macros for new cli
subdirectory.
* configure.in (enable_gdbcli): New option. Include the CLI in the
executable (cannot be disabled yet).
(CONFIG_OBS, CONFIG_DEPS, CONFIG_SRCS, CONFIG_INITS, ENABLE_CFLAGS,
CONFIG_ALL, CONFIG_CLEAN, CONFIG_INSTALL, CONFIG_UNINSTALL): Add
the corresponding SUBDIR_CLI_* macros if CLI requested.
* configure: Regenerate.
* linespec.h: New file. Declarations for linespec.c.
* linespec.c, alpha-tdep.c, breakpoint.c, parse.c, source.c,
symtab.c, tracepoint.c: Include the above.
* completer.c: New file. Line completion stuff for GDB.
(get_gdb_completer_word_break_characters,
get_gdb_completer_quote_characters): New functions. Accessors for
useful completer internal data.
(filename_completer, line_completion_function, skip_quoted): Moved
here from top.c.
* completer.h: New file. Declarations for the above.
* linespec.c (decode_line_1): Use
get_gdb_completer_word_break_characters and
get_gdb_completer_quote_characters.
* top.c: Include completer.h.
(filename_completer, line_completion_function, skip_quoted):
Moved to completer.c.
* corefile.c, exec.c, source.c, symfile.c, linespec.c: Include
completer.h.
* Makefile.in (SFILES): Add completer.c.
(COMMON_OBS): Add completer.o.
(completer.o): New target.
(linespec.o, alpha-tdep.o, breakpoint.o, parse.o, source.o,
symtab.o, tracepoint.o): Add linespec.h to dependencies list.
(corefile.o, exec.o, source.o, symfile.o, linespec.o): Add completer.h
to dependencies list.
* solist.h: Declare new function solib_open.
* solib.c (solib_open): New function. Abstracts some of the
code from solib_map_sections, for finding the binary solib file.
(solib_map_sections): Call solib_open.
* solib-svr4.c (enable_break): Call solib_open.
store_inferior_registers): Support older NetBSD/powerpc systems
from before fp reg support was added. Adapt to register number
changes caused when powerpc target was multi-arched.
to automatically dereference a function pointer for printing
if necessary.
(c_val_print): Use print_function_pointer_address when printing
function pointer addresses.
(sources_info): Replace use of no_symtab_msg with the string
itself.
* linespec.c (no_symtab_msg): Remove declaration.
(decode_line_1): Replace uses of no_symtab_msg with the string
itself.
* regcache.c (read_register_bytes): Failing to set register_valid
is not necessarily an error, if the register is a pseudo-register.
Some pseudo-registers are never marked as valid, so that they will
be read anew every time. Determining if a pseudo-register is valid
(or should be marked invalid) may be difficult, whereas just
recomputing it may be cheap.
step_over_calls.
* infcmd.c (step_over_calls): Change definition.
(step_1): Use new enum values in relation to step_over_calls.
(step_once): Ditto.
(until_next_command): Ditto.
* infrun.c (clear_proceed_status): Ditto.
(handle_inferior_event): Ditto.
* inferior.h (step_stop_if_no_debug): New variable.
* infrun.c (step_stop_if_no_debug): Declare.
(handle_inferior_event): Stop the step command if we entered a function without
line info.
(_initialize_infrun): New command 'set step-mode' to control the step command.
* infcmd.c (step_once): Switch to stepi mode if there is no line info
(and switching is enabled).
* target.c (do_xfer_memory): Only perform a single memory transfer
instead of iterating to tranfer the entire region. Higher layers
are expected to call this function multiple times for partial
transfers.
(target_xfer_memory_partial): Remove unused local variables.
2000-11-10 Nick Duffek <nsd@redhat.com>
* target.c (target_xfer_memory_partial): Return bytes transferred
instead of 0.
SOLIB_SYMBOLS_MANUAL code, cleanup of AIX shared library handling code.
* rs6000-nat.c (vmap_symtab): Do not try to modify offsets
if symbols are not yet loaded.
(vmap_add_symbols): New function to add symbols for a vmap entry.
(add_vmap): Turn errors into warnings, return NULL vmap upon
failure. Add symbols via vmap_add_symbols only if requested.
(xcoff_relocate_core): Allow debugging of core files without an
executable file. Handle NULL returns from add_vmap gracefully.
* xcoffsolib.c (solib_add): Remove, no longer needed.
(solib_info): Do not check for new shared libraries if there is no
inferior process.
(sharedlibrary_command): Made static.
Do not check for new shared libraries if there is no inferior process.
Add symbols for requested shared libraries via vmap_add_symbols.
(_initialize_solib): Add `set auto-solib-add' command.
* xcoffsolib.h (vmap_add_symbols): Add prototype declaration.
* config/rs6000/tm-rs6000.h (PC_LOAD_SEGMENT): Move from here ...
* config/rs6000/nm-rs6000.h: ... to here, this is an AIX native
feature.
* config/powerpc/tm-macos.h, config/powerpc/tm-ppc-eabi.h,
config/powerpc/tm-ppc-nw.h, config/rs6000/tm-rs6000ly.h:
Remove #undef PC_LOAD_SEGMENT.
* config/powerpc/aix.mt, config/rs6000/aix4.mt, config/rs6000/rs6000.mt
(TDEPFILES): Move xcoffsolib.o from here ...
* config/powerpc/aix.mh, config/rs6000/aix4.mh, config/rs6000/rs6000.mh
(NATDEPFILES): ... to here, xcoffsolib.o contains AIX native code
only.
* rs6000-tdep.c: Remove #include xcoffsolib.h, no longer needed.
* xcoffsolib.h (xcoff_relocate_symtab_hook): Remove declaration.
* rs6000-nat.c (_initialize_core_rs6000): Remove setting of
xcoff_relocate_symtab_hook, no longer needed.
* xcoffsolib.c (solib_info, sharedlibrary_command): Remove
xcoff_relocate_symtab_hook indirection, call xcoff_relocate_symtab
directly, as xcoffsolib.c is now compiled in native AIX configurations
only.
* Makefile.in: Update dependencies for rs6000-tdep.o, rs6000-nat.o
and xcoffsolib.o.
* wrapper.c (gdb_value_assign): New function. Longjump-free
version of value_assign.
(wrap_value_assign): New function. Wrapper for value_assign.
* wrapper.h: Add declaration for the above.
* varobj.c (varobj_set_value): Use gdb_value_assign, not
value_assign which can longjump. Do not change varobj value if
assign fails.
From Steven Johnson <sbjohnson@ozemail.com.au>:
This set of changes add "hookpost-" as an expansion on the original
hooking of commands to GDB. A Hook may now be run "AFTER" execution of
a command as well as before.
* command.h (struct cmd_list_element): Changed elements hook and hookee
to hook_pre and hookee_pre respectively. Added hook_post and hookee_post
for the post hook command operation. Added hook_in so that an executing
hook can be flagged to prevent recursion.
* command.c (add_cmd): Changed initilization of cmd_list_element to
reflect above changes.
(delete_cmd): Remove both pre and post hooks.
(help_cmd): Notify that the command has pre and/or post hooks.
* infrun.c (normal_stop): Change references to hook_pre from hook.
* top.c (execute_command): Run both pre and post hooks.
(define_command): Allow definition of both pre and post hooks.
The definition of pre-hooks is done as before, with the "hook-"
prefix for backward compatibility.
* config/sh/tm-linux.h: New file. Include generic tm-linux.h,
plus tm-sh.h, then define SVR4_FETCH_LINK_MAP_OFFSETS to use
the sh target function instead of the default link map offsets.
* config/sh/sh.mt: Add solib.o and solib-svr4.o to TDEPFILES.
Use sh/tm-linux.h instead of sh/tm-sh.h.
* sh-tdep.c (sh_linux_svr4_fetch_link_map_offsets):
New function. Construct target-specific link map offsets.
* i386-linux-tdep.c (i386_linux_svr4_fetch_link_map_offsets:
New function. Construct target-specific link map offsets.
* config/i386/tm-linux.h: Use above function instead of default.
2000-10-30 Michael Snyder <msnyder@cleaver.cygnus.com>
* config/i386/tm-linux.h: Remove definition of SVR4_SHARED_LIBS,
and inclusion of solib.h. Move up into ../tm-linux.h.
config/tm-linux.h: Define SVR4_SHARED_LIBS, include solib.h.
* ax-gdb.c (gen_struct_ref): while generating data code, cases of
"collect p1->p2->data" where not covered if p2 is a 'typedefed'
type. this simple fix should forward the type pointer to the real
type.
set_gdbarch_from_file): Fix spelling error.
* v850-tdep.c (v850_target_architecture_hook): Likewise.
* gdbarch.sh: Fix spelling errors in comment.
* gdbarch.c, gdbarch.h: Regenerate.
* ppcnbsd-nat.c (fetch_core_registers, fetch_inferior_registers,
store_inferior_registers): Support older NetBSD/powerpc systems
from before fp reg support was added. Adapt to register number
changes caused when powerpc target was multi-arched.
* stabsread.c (define_symbol): Update comment.
2000-10-26 Pierre Muller <muller@ics.u-strasbg.fr>
* stabsread.c (define_symbol): Set the type_name of the type
of the new symbol to the symbol name for type symbol, if the
language is Pascal.
* symtab.h (SYMBOL_INIT_DEMANGLED_NAME): Initialize the symbol language to auto
instead of unknown, so it will try to demangle the symbol.
* symtab.h (OPNAME_PREFIX_P): Change operator prefix to correct value.
* symtab.c (gdb_mangle_name): Properly handle C++ operators.
Adjust call_dummy_breakpoint_offset, so that `finish' after a stop
in a call dummy works.
(sparc_gdbarch_init): Fix setting of pc_in_call_dummy, it depends
on SPARC32/64_CALL_DUMMY_ON_STACK, not DO_CALL_DUMMY_ON_STACK.
* remote.c (putpkt_binary): Call read_frame, not getpkt. Log message.
(read_frame): Do not call error() on communication error when
reading checksum, but return failure instead and log message.
* varobj.c (type_changeable): Arrays are not changeable.
Trying to check for updates was causing an error if the array lived
in a register as gdb value_equal() cannot handle that case yet.
* varobj.c (varobj_update): Prevent uninitialized error code to be
returned on type_changed. Also, prevent value_equal() to be called
for the types we do not want to test for updates.
From Grant Edwards <grante@visi.com>
This keeps the GUI alive while running an RDI target and lets the
STOP button be used to stop the target.
* remote-rdi.c (arm_rdi_stop): New function. Implements target_stop.
(init_rdi_ops): Set to_stop target vector entry to the above.
* rdi-share/ardi.c (stop_request): New variable. Tells when a stop
has been requested.
(angel_RDI_stop_request): New function. Registers that a stop has
been requested.
(angel_RDI_ExecuteOrStep): Add call to ui_loop_hook() in loop that
waits while target is executing. Initialize and reset stop_request.
* rdi-share/ardi.h: Add declaration of angel_RDI_stop_request().
From Daniel Berlin <dberlin@redhat.com> :
* symtab.h (SYMBOL_INIT_DEMANGLED_NAME): Initialize the symbol
language to auto instead of unknown, so it will try to demangle
the symbol.
* symtab.h (OPNAME_PREFIX_P): Change operator prefix to correct value.
* symtab.c (gdb_mangle_name): Properly handle C++ operators.
From Daniel Berlin <dberlin@redhat.com> :
* symtab.c (lookup_symbol_aux): New function. Renamed from
lookup_symbol. Move code to do demangling/case sensitivity to
lookup_symbol().
(lookup_symbol): Now wrapper for lookup_symbol_aux, so we can
perform case sensitivity/demangling without leaking memory. Move
code to do demangling/case sensitivity from old_lookup_symbol to
here.
(lookup_partial_symbol): Use SYMBOL_SOURCE_NAME instead of
SYMBOL_NAME.
(lookup_block_symbol): Use SYMBOL_SOURCE_NAME instead of
SYMBOL_NAME. Don't do linear search in case of C++.
* symfile.c (compare_symbols): Use SYMBOL_SOURCE_NAME instead of
SYMBOL_NAME.
(compare_psymbols): Same here.
for call dummy instead of accessing stop_stack_dummy, which does
not work if we `return' from a stop in a call dummy.
(rs6000_gdbarch_init): Use generic_save_dummy_frame_tos for
dummy_frame_tos function to make PC_IN_CALL_DUMMY work.
OLD_CANNOT_FETCH_REGISTER): New definitions for accessible registers
when accessing the registers via the U area.
(fetch_register, store_register): Use them.
(cannot_fetch_register, cannot_store_register): New functions,
all registers should be accessible if we have GETREGS support.
* config/i386/nm-linux.h: Use cannot_fetch/store_register for
CANNOT_FETCH/STORE_REGISTER definitions.
