2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
Daniel Jacobowitz <dan@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
* cris/configure: Regenerate.
sim/common:
2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
Daniel Jacobowitz <dan@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
* aclocal.m4: Include ../../config/acx.m4.
* common.m4: Use ACX_PKGVERSION and ACX_BUGURL.
* configure, config.in: Regenerate.
* Make-common.in (LIB_OBJS): Add version.o.
(version.c, version.o): New rules.
* run.c: Include version.h.
(usage): Add help parameter. Print output either to stdout or
stderr depending on that parameter.
(print_version): New.
(main): Check for --help and --version.
* run-sim.h (sim_target_display_usage): Add help parameter.
* version.h: New.
sim/arm:
2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
Daniel Jacobowitz <dan@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
* configure: Regenerate.
* wrapper.c (sim_target_display_usage): Add help parameter.
sim/cr16:
2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
Daniel Jacobowitz <dan@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
* configure: Regenerate.
sim/d10v:
2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
Daniel Jacobowitz <dan@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
* configure: Regenerate.
sim/erc32:
2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
Daniel Jacobowitz <dan@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
* configure: Regenerate.
sim/frv:
2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
Daniel Jacobowitz <dan@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
* configure: Regenerate.
sim/h8300:
2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
Daniel Jacobowitz <dan@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
* configure: Regenerate.
sim/iq2000:
2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
Daniel Jacobowitz <dan@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
* configure: Regenerate.
sim/m32c:
2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
Daniel Jacobowitz <dan@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
* configure: Regenerate.
sim/m32r:
2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
Daniel Jacobowitz <dan@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
* configure: Regenerate.
sim/m68hc11:
2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
Daniel Jacobowitz <dan@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
* configure: Regenerate.
sim/mcore:
2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
Daniel Jacobowitz <dan@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
* configure: Regenerate.
sim/mips:
2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
Daniel Jacobowitz <dan@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
* configure: Regenerate.
sim/mn10300:
2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
Daniel Jacobowitz <dan@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
* configure: Regenerate.
sim/ppc:
2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
Daniel Jacobowitz <dan@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
* configure.ac: Use ACX_PKGVERSION and ACX_BUGURL.
* configure, config.in: Regenerated.
* Makefile.in (LIB_OBJ): Add version.o.
(version.c, version.o): New rules.
* psim.c (psim_usage): Add help parameter. Print the bug URL.
Exit with code 0 for help.
(psim_options): Update calls to psim_usage. Handle --help and
--version.
* psim.h (psim_usage): Update prototype.
* main.c (main): Update psim_usage call.
sim/sh:
2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
Daniel Jacobowitz <dan@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
* configure: Regenerate.
sim/sh64:
2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
Daniel Jacobowitz <dan@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
* configure: Regenerate.
sim/v850:
2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
Daniel Jacobowitz <dan@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
* configure: Regenerate.
2005-01-12 Andrew Cagney <cagney@gnu.org>
* configure.ac: Update to use ../common/common.m4.
* configure: Re-generate.
Index: mn10300/ChangeLog
2005-01-12 Andrew Cagney <cagney@gnu.org>
* configure.ac: Update to use ../common/common.m4.
* configure: Re-generate.
Index: d10v/ChangeLog
2005-01-12 Andrew Cagney <cagney@gnu.org>
* configure.ac: Update to use ../common/common.m4.
* configure: Re-generate.
Index: erc32/ChangeLog
2005-01-12 Andrew Cagney <cagney@gnu.org>
* configure.ac: Update to use ../common/common.m4.
* configure: Re-generate.
Index: frv/ChangeLog
2005-01-12 Andrew Cagney <cagney@gnu.org>
* configure.ac: Update to use ../common/common.m4.
* configure: Re-generate.
Index: h8300/ChangeLog
2005-01-12 Andrew Cagney <cagney@gnu.org>
* configure.ac: Update to use ../common/common.m4.
* configure: Re-generate.
Index: m32r/ChangeLog
2005-01-12 Andrew Cagney <cagney@gnu.org>
* configure.ac: Update to use ../common/common.m4.
* configure: Re-generate.
Index: mcore/ChangeLog
2005-01-12 Andrew Cagney <cagney@gnu.org>
* configure.ac: Update to use ../common/common.m4.
* configure: Re-generate.
Index: mips/ChangeLog
2005-01-12 Andrew Cagney <cagney@gnu.org>
* configure.ac: Update to use ../common/common.m4.
* configure: Re-generate.
Index: v850/ChangeLog
2005-01-12 Andrew Cagney <cagney@gnu.org>
* configure.ac: Update to use ../common/common.m4.
* configure: Re-generate.
Index: common/ChangeLog
2005-01-12 Andrew Cagney <cagney@gnu.org>
* common.m4: New file, based on of aclocal.m4.
Index: arm/ChangeLog
2005-01-12 Andrew Cagney <cagney@gnu.org>
* configure.ac: Update to use ../common/common.m4.
* configure: Re-generate.
2003-07-23 Richard Sandiford <rsandifo@redhat.com>
* compile.c (sim_resume): Make sure that dst.reg refers to the
right register byte in mova/sz.l @(dd,RnL),ERn.
2003-07-21 Richard Sandiford <rsandifo@redhat.com>
* compile.c (sim_resume): Zero-extend immediate to muls, mulsu,
mulxs, divs and divxs.
sim/testsuite/sim/h8300/ChangeLog:
2003-07-22 Michael Snyder <msnyder@redhat.com>
* mul.s: Don't try to use negative immediate (it's always
unsigned).
* div.s: Ditto.
* h8300/compile.c : Addition of extern variable h8300_normal_mode
(SP) : Handle normal mode
(bitfrom) : Use normal mode flag to return suitable value
(lvalue) : Use normal mode flag to return command line location
(decode) : Decode instruction correctly for normal mode
(init_pointers) : Initialise memory correctly for normal mode
(sim_resume) : Handle cases for normal mode using h8300_normal_mode flag
(sim_store_register) : Handle 2 byte PC for normal mode
(sim_fetch_register) : Handle 2 byte PC for normal mode
(set_h8300h) : Set normal mode flag as per architechture
(sim_load) : Allocate 64K for normal mode instead of bigger memory
* compile.c (decode): Enhancements for mova.
Initialize cst, reg, and rdisp inside the loop, for each
new instruction. Defer correction of the disp2 values until
later, and then adjust them by the size of the first operand,
rather than the size of the instruction.
(sim_resume): For mova, adjust the size of the second operand
according to the type of the first operand (INDEXB vs. INDEXW).
In cases where there is only one operand, the other two must
both be composed on the fly.
* compile.c: Replace "Hitachi" with "Renesas".
(decode): Distinguish AV_H8S from AV_H8H.
(sim_resume): H8SX can use any register for TAS.
(decode): Add support for VECIND.
(sim_resume): Implement rte/l and rts/l.
(GETSR): New macro (actually old macro reincarnated).
(decode): Add handling for IMM2.
(sim_resume): Drop extra block around jmp, jsr, rts.
Add handling for trapa and rte.
For divxu.b, change 0xffff mask to 0xff.
(set_h8300h): Add bfd_mach_h8300sxn machine.
* compile.c (sim_info): Fix typo in output.
* h8300/compile.c (set_h8300h): Replace 'flag' arguments
with a bfd_machine argument, and decode it inline.
Check for bfd_mach_h8300hn and bfd_mach_h8300sn.
2003-03-20 D.Venkatasubramanian <dvenkat@noida.hcltech.com>
* compile.c (cmdline_location): Added function to
return the location of 8-bit (256 locations) where the
Command Line arguments would be stored.
(decode): Added a TRAP to 0xcc for Commandline
processing using pseudo opcode O_SYS_CMDLINE.
(sim_resume): Added handling of O_SYS_CMDLINE Trap.
(sim_create_inferior): Setting a pointer to
Commandline Args array.
* inst.h: Added a new variable ptr_command_line for
storing pointer to Commandline array.
2003-03-14 D.Venkatasubramanian <dvenkat@noida.hcltech.com>
* compile.c (decode): Added code for some more magic traps.
* compile.c (sim_resume): Added support for File I/O system
calls through callback to host_system.
System calls provided support for :
open, read, write, lseek, close, stat, fstat
Only basic support for stat and fstat.
2000-06-20 Frank Ch. Eigler <fche@redhat.com>
* compile.c: Don't include "wait.h".
(sim_resume): Use local SIM_WIFEXITED and SIM_WIFSIGNALED macros
instead of WIF* from host.
with sim/common.
* configure.in: check for sys/param.h
* compile.c: #ifdef HAVE_SYS_PARAM_H.
#define SIGTRAP for wingdb.
(sim_resume): poll keyboard at least once per call.
(sim_resume): use host_callback instead of printf for syscall
output.
Add file sim-hload.c - generic load for hardware only simulators.
Review each simulators sim_open, sim_load, sim_create_inferior so that
they more closely match required behavour.
that image properties such as endianness can be checked.
More strongly document the expected behavour of each of the sim_*
interfaces.
Add default endian argument to simulator config macro
SIM_AC_OPTION_ENDIAN. Use in sim_config.
o Provide poll_quit callback to simulators
so that they can poll for SIGINT on
clueless OS's.
o Add sim_stop to simulators so that clients
can request a halt (eg gdbtk's STOP button)
Works for PPC!
o Re-arange remote-sim.c so that the
hard work is moved from gdbsim_resume()
to gdbsim_wait() (where it should be).
* compile.c (sim_kind, myname): New static locals.
(sim_open): Set sim_kind, myname.
(sim_load): Return SIM_RC. New arg abfd. Update test for h8300h.
Call sim_load_file to load file into simulator. Set start address
from bfd.
(sim_create_inferior): Return SIM_RC. Delete arg start_address.
* Make-common.in (CSEARCH): Do not include the gdb directory in
the search path.
* Make-common.in (SIM_ENDIAN, SIM_HOSTENDIAN, SIM_INLINE,
SIM_WARNING): Drop, requiring the simulator specific Makefile.in
to explicitly incorporate these.
* aclocal.m4 (--enable-sim-alignment); New option. Strongly
specify the alignment restrictions of the target architecture -
without this option all alignment restrictions are accomodated.
(--enable-sim-assert): New option. Conditionally compile in
assertion statements.
(--enable-sim-float): New option. Strongly specify the target's
floating point support.
(--enable-sim-hardware): New option. Specify the hardware devices
included in the simulation.
(--enable-sim-packages): New option. Specify the hardware
packages included in the simulation.
(--enable-sim-regparm): New option. Specify that parameters be
passed in registers instead of on the stack.
(--enable-sim-reserved-bits): New option. Specify that reserved
bits within an instruction are are correctly set.
(--enable-sim-smp): New option. Specify the level of SMP support
to be included in the simulator.
(--enable-sim-stdcall): New option. Specify an alternative
function call convention.
(--enable-sim-xor-endian): New option. Configure xor-endian
support used by some targets to implement bi-endian support.
