Just mask higher bits off, which returns the same set of 3-bit register
encodings of { 0, 1, 2, 3, 4, 5, 6, 7 } for the allowed 5-bit encodings
of { 16, 17, 2, 3, 4, 5, 6, 7 }. Input has already been validated with
OP16_VALID_REG.
bfd/
* elfxx-mips.c (BZ16_REG_FIELD): Simplify calculation.
The test constructs fake DWARF info for a C structure involving bitfields.
DWARF bitfields are always counted from LSB, while the order in which
bitfields are allocated in a C struct depends on the target endianness -
thus the generated DWARF marks different bitfields as unavailable when
target is big endian. Accordingly, we need different expected outputs.
Tested on s390 and s390x, no regression on x86_64.
gdb/testsuite/ChangeLog:
* gdb.trace/unavailable-dwarf-piece.exp: Fix bitfield handling on big
endian targets.
Missed one message in bd0a71fa16, since it
didn't trigger on s390x or amd64 (fast tracepoint out of range due to
shared library usage), noticed on s390.
Pushed as obvious.
gdb/testsuite/ChangeLog:
* gdb.trace/pending.exp: Fix expected message on continue.
Pedro Alves:
Looks like you forgot to amend before pushing though -- the version
checked in still had "Thread 1".
gdb/testsuite/ChangeLog
2016-01-22 Jan Kratochvil <jan.kratochvil@redhat.com>
Pedro Alves <palves@redhat.com>
Fix testsuite compatibility with Guile.
* gdb.gdb/selftest.exp (send ^C to child process): Drop expected Thread
number.
The PR threads/19422 patchset added a new regression.
Additionally below it there was already a regression if --with-guile (which is
default if Guile is found) was used.
racy case #1:
(xgdb) PASS: gdb.gdb/selftest.exp: Set xgdb_prompt
^M
Thread 1 "xgdb" received signal SIGINT, Interrupt.^M
0x00007ffff583bfdd in poll () from /lib64/libc.so.6^M
(gdb) FAIL: gdb.gdb/selftest.exp: send ^C to child process
signal SIGINT^M
Continuing with signal SIGINT.^M
^C^M
Thread 1 "xgdb" received signal SIGINT, Interrupt.^M
0x00007ffff5779da0 in sigprocmask () from /lib64/libc.so.6^M
(gdb) PASS: gdb.gdb/selftest.exp: send SIGINT signal to child process
backtrace^M
errstring=errstring@entry=0x7e0e6c "", mask=mask@entry=RETURN_MASK_ALL) at exceptions.c:240^M
errstring=errstring@entry=0x7e0e6c "", mask=mask@entry=RETURN_MASK_ALL) at exceptions.c:240^M
(gdb) PASS: gdb.gdb/selftest.exp: backtrace through signal handler
racy case #2:
(xgdb) PASS: gdb.gdb/selftest.exp: Set xgdb_prompt
^M
Thread 1 "xgdb" received signal SIGINT, Interrupt.^M
0x00007ffff583bfdd in poll () from /lib64/libc.so.6^M
(gdb) FAIL: gdb.gdb/selftest.exp: send ^C to child process
signal SIGINT^M
Continuing with signal SIGINT.^M
^C^M
Thread 2 "xgdb" received signal SIGINT, Interrupt.^M
[Switching to Thread 0x7ffff3b7f700 (LWP 13227)]^M
0x00007ffff6b88b10 in pthread_cond_wait@@GLIBC_2.3.2 () from /lib64/libpthread.so.0^M
(gdb) PASS: gdb.gdb/selftest.exp: send SIGINT signal to child process
backtrace^M
(gdb) FAIL: gdb.gdb/selftest.exp: backtrace through signal handler
Pedro Alves:
Not all targets support thread names, and even those that do, not all
use the program name as default thread name -- I think that's only true
for GNU/Linux, actually. So I think it's best to not expect that, like:
-re "(Thread .*|Program) received signal SIGINT.*$gdb_prompt $" {
gdb/testsuite/ChangeLog
2016-01-22 Jan Kratochvil <jan.kratochvil@redhat.com>
Fix testsuite compatibility with Guile.
* gdb.gdb/selftest.exp (send ^C to child process): Accept also Thread.
(thread 1): New test for backtrace through signal handler.
The prior format led to confusing messages when threads were created
or added such as "[New process 14757, LWP 100537]". The new format
reports this as "[New LWP 100434 of process 15652]".
gdb/ChangeLog:
* fbsd-nat.c (fbsd_pid_to_str): Adjust string format.
Noticed and tested on 31-bit s390. This bug caused completely broken
fast tracepoints.
gdb/gdbserver/ChangeLog:
* tracepoint.c (write_inferior_data_ptr): Cast to uintptr_t, so that
it works properly on big-endian machines where sizeof (CORE_ADDR)
!= sizeof (void *).
This patch unbuffer the output of the program so that the test harness
can count the number of "done" from output correctly.
gdb/testsuite:
2016-01-22 Yao Qi <yao.qi@linaro.org>
PR testsuite/19491
* gdb.base/multi-forks.c: Include
../lib/unbuffer_output.c
(main): Call gdb_unbuffer_output.
I see the following test fail on native arm-linux gdb testing...
(gdb) PASS: gdb.base/killed-outside.exp: registers: get pid of inferior
Executing on target: kill -9 2346 (timeout = 300)
spawn kill -9 2346^M
flushregs^M
Register cache flushed.^M
warning: Unable to fetch general registers.^M
PC not available^M
(gdb) PASS: gdb.base/killed-outside.exp: registers: flushregs
info threads^M
Id Target Id Frame ^M
* 1 process 2346 "killed-outside" (gdb) FAIL: gdb.base/killed-outside.exp: registers: info threads (timeout)
since the inferior disappeared, ptrace will fail. In that case, the
exception should be thrown, so that the caller can handle that.
gdb:
2016-01-22 Yao Qi <yao.qi@linaro.org>
* arm-linux-nat.c (fetch_fpregs): Call perror_with_name
instead of warning.
(store_fpregs, fetch_regs, store_regs): Likewise.
(fetch_wmmx_regs, store_wmmx_regs): Likewise.
(fetch_vfp_regs, store_vfp_regs): Likewise.
String collection always used ref32 to fetch the string pointer. Make it
use gen_fetch instead.
As a side effect, this patch changes dup+const+trace+pop sequence used
for collecting the string's address to a trace_quick opcode. This
results in a shorter agent expression.
This appeared to work on x86_64 since it's a little-endian platform, and
malloc (used in gdb.trace/collection.exp) returns addresses in low 4GB.
Noticed and tested on s390x-ibm-linux-gnu, also tested on
i686-unknown-linux-gnu and x86_64-unknown-linux-gnu.
gdb/ChangeLog:
* ax-gdb.c (gen_traced_pop): Use gen_fetch for string collection.
Give the function a better name (drop "maybe_") and update the header
comment.
gdb/ChangeLog:
* disasm.c (maybe_add_dis_line_entry): Rename to...
(add_dis_line_entry): ...this, and update header comment.
(do_mixed_source_and_assembly): Now use add_dis_line_entry.
Currently, even when built with --enable-build-with-cxx, gdb uses
CFLAGS instead of CXXFLAGS. This commit fixes it.
CXXFLAGS set in the environment when configure was run is now honored
in the generated gdb/Makefile, and you can also override CXXFLAGS in
the command like at make time, with the usual 'make CXXFLAGS="..."'
Objects built with a C compiler (e.g., gnulib) still honor CFLAGS
instead.
gdb/ChangeLog:
2016-01-21 Pedro Alves <palves@redhat.com>
* Makefile.in (COMPILER_CFLAGS): New.
(CXXFLAGS): Get it from configure.
(INTERNAL_CFLAGS_BASE, INTERNAL_LDFLAGS): Use COMPILER_CFLAGS
instead of CFLAGS.
* build-with-cxx.m4 (GDB_AC_BUILD_WITH_CXX): Set and AC_SUBST
COMPILER_CFLAGS.
* configure: Regenerate.
gdb/gdbserver/ChangeLog:
2016-01-21 Pedro Alves <palves@redhat.com>
* Makefile.in (COMPILER_CFLAGS, CXXFLAGS): New.
(INTERNAL_CFLAGS_BASE): Use COMPILER_CFLAGS instead of CFLAGS.
* configure: Regenerate.
PR ld/19455
* elf32-arm.c (elf32_arm_create_dynamic_sections): Set the ELF
class of the linker stub bfd.
(elf32_arm_check_relocs): Skip check for pic format after
processing a vxWorks R_ARM_ABS12 reloc.
* elflink.c (bfd_elf_final_link): Check for ELFCLASSNONE when
reporting a class mismatch.
* testsuite/ld-arm/vxworks1-lib.dd: Update for current
disassmebler output.
* testsuite/ld-arm/vxworks1-lib.rd: Likewise.
* testsuite/ld-arm/vxworks1.dd: Likewise.
* testsuite/ld-arm/vxworks1.rd: Likewise.
* testsuite/ld-arm/vxworks1.ld: Set the output format.
A relatively recent patch support for explicit locations, and part
of that patch cleaned up the way we parse breakpoint locations.
Unfortunatly, a small regression crept in for "*<EXPR>" breakpoint
locations. In particular, on PIE programs, one can see the issue by
doing the following, with any program:
(gdb) b *main
Breakpoint 1 at 0x51a: file hello.c, line 3.
(gdb) run
Starting program: /[...]/hello
Error in re-setting breakpoint 1: Warning:
Cannot insert breakpoint 1.
Cannot access memory at address 0x51a
Warning:
Cannot insert breakpoint 1.
Cannot access memory at address 0x51a
Just for the record, this regression was introduced by:
commit a06efdd6ef
Date: Tue Aug 11 17:09:35 2015 -0700
Subject: Explicit locations: introduce address locations
What happens is that the patch makes the implicit assumption that
the address computed the first time is static, as if it was designed
to only support litteral expressions (Eg. "*0x1234"). This allows
the shortcut of not re-computing the breakpoint location's address
when re-setting breakpoints.
However, this does not work in general, as demonstrated in the example
above.
This patch plugs that hole simply by saving the original expression
used to compute the address as part of the address location, so as
to then re-evaluate that expression during breakpoint re-set.
gdb/ChangeLog:
* location.h (new_address_location): Add new parameters
"addr_string" and "addr_string_len".
(get_address_string_location): Add declaration.
* location.c (new_address_location): Add new parameters
"addr_string" and "addr_string_len". If not NULL, store
a copy of the addr_string in the new location as well.
(get_address_string_location): New function.
(string_to_event_location): Update call to new_address_location.
* linespec.c (event_location_to_sals) <ADDRESS_LOCATION>:
Save the event location in the parser's state before
passing it to convert_address_location_to_sals.
* breakpoint.c (create_thread_event_breakpoint): Update call
to new_address_location.
(init_breakpoint_sal): Get the event location's string, if any,
and use it to update call to new_address_location.
* python/py-finishbreakpoint.c (bpfinishpy_init):
Update call to new_address_location.
* spu-tdep.c (spu_catch_start): Likewise.
* config/djgpp/fnchange.lst: Add entries for
gdb/testsuite/gdb.base/break-fun-addr1.c and
gdb/testsuite/gdb.base/break-fun-addr2.c.
gdb/testsuite/ChangeLog:
* gdb.base/break-fun-addr.exp: New file.
* gdb.base/break-fun-addr1.c: New file.
* gdb.base/break-fun-addr2.c: New file.
As defined at AArch64 ELF Specification (4.6.7 Call and Jump
relocations), symbol with type of non STT_FUNC but in different input
section with relocation place should insert long branch veneer also.
Meanwhile the current long branch veneer infrastructure havn't considered
the situation where the branch destination is "sym_value + rela->addend".
This was OK because we only insert veneer for long call destination is
STT_FUNC symbol for which the addend is always zero. But as we relax the
support to other situations by this patch, we need to handle addend be
non-zero value. For example, for static function, relocation against
"local symbol" are turned into relocation against "section symbol + offset"
where there is a valid addend.
bfd/
* elfnn-aarch64.c (aarch64_type_of_stub): Allow insert long branch
veneer for sym_sec != input_sec.
(elfNN_aarch64_size_stub): Support STT_SECTION symbol.
(elfNN_aarch64_final_link_relocate): Take rela addend into account when
calculation destination.
ld/
* testsuite/ld-aarch64/farcall-section.d: Delete.
* testsuite/ld-aarch64/farcall-section.s: Delete.
* testsuite/ld-aarch64/farcall-b-section.d: New expectation file.
* testsuite/ld-aarch64/farcall-bl-section.d: Likewise.
* testsuite/ld-aarch64/farcall-b-section.s: New testcase.
* testsuite/ld-aarch64/farcall-bl-section.s: Likewise.
* testsuite/ld-aarch64/aarch64-elf.exp: Likewise.
Since it will sometime have more than just prpsinfo. Also,
elf32-ppc.c needlessly includes this header.
* elf-linux-core.h: Rename from elf-linux-psinfo.h.
* elf.c: Adjust #include.
* elf32-ppc.c: Don't #include elf-linux-psinfo.h
* Makefile.am (SOURCE_HFILES): Update.
* Makefile.in: Regenerate.
* po/SRC-PORFILES.in: Regenerate.
Corefile code should be moved after running config.bfd, because it
uses want64.
* configure.ac: Move corefile selection later in file. Move
tdefaults code immediately after other target vector code.
* configure: Regenerate.
This patch fixes the following regression introduced by commit d0e59a68
step^M
39 } /* handler */^M
1: x/i $pc^M
=> 0x8740 <handler+80>: sub sp, r11, #0^M
(gdb) step^M
^M
Program received signal SIGSEGV, Segmentation fault.^M
setitimer () at ../sysdeps/unix/syscall-template.S:81^M
81 ../sysdeps/unix/syscall-template.S: No such file or directory.^M
1: x/i $pc^M
=> 0xb6eff9c0 <setitimer>: push {r7}^M
(gdb) FAIL: gdb.base/sigstep.exp: continue to handler, si+advance in handler, step from handler: leave handler
in my test setting, program is compiled in arm mode, but the glibc
is built in thumb mode, so when we do 'step' to step over syscall
instruction svc for SIGRETURN, GDB should set breakpoint for arm mode
in the program, even though the current program in glibc is in thumb
mode. Current GDB doesn't consider the case that the mode of program
SIGRETURN goes to can be different from current program mode.
In fact, GDB has taken care of this arm/thumb mode changes already,
see
/* Copy the value of next pc of sigreturn and rt_sigrturn into PC,
return 1. In addition, set IS_THUMB depending on whether we
will return to ARM or Thumb code. Return 0 if it is not a
rt_sigreturn/sigreturn syscall. */
static int
arm_linux_sigreturn_return_addr (struct frame_info *frame,
unsigned long svc_number,
CORE_ADDR *pc, int *is_thumb)
but in the commit d0e59a68
> - arm_linux_sigreturn_return_addr (frame, svc_number, &return_addr, &is_thumb);
> + if (svc_number == ARM_SIGRETURN || svc_number == ARM_RT_SIGRETURN)
> + next_pc = arm_linux_sigreturn_next_pc (regcache, svc_number);
the IS_THUMB setting is lost, so it is a regression.
gdb:
2016-01-21 Yao Qi <yao.qi@linaro.org>
* arm-linux-tdep.c (arm_linux_sigreturn_next_pc): Add parameter
is_thumb and set it according to CPSR saved on the stack.
(arm_linux_get_next_pcs_syscall_next_pc): Pass is_thumb to
arm_linux_sigreturn_next_pc.
gdb/gdbserver:
2016-01-21 Yao Qi <yao.qi@linaro.org>
* linux-arm-low.c (arm_sigreturn_next_pc): Add parameter
is_thumb and set it according to CPSR saved on the stack.
(get_next_pcs_syscall_next_pc): Pass is_thumb to
arm_sigreturn_next_pc.
The lambda function used to sort the enumerator list does not work
properly. This list consists of tuples, (enum label, enum value). The
key function returns x.enumval. enumval not being defined for a tuple,
we see this exception in the test log:
Python Exception <class 'AttributeError'> 'tuple' object has no attribute 'enumval'
The function should return the second item of the tuple, which is the
enumval.
The pretty-printer still worked mostly correctly, except that the
enumeration values were not sorted. The test still passed because the
enumeration values are already sorted where they are defined. The test
also passed despite the exception being printed, because the right output
was printed after the exception:
print (enum flag_enum) (FLAG_1)
Python Exception <type 'exceptions.AttributeError'> 'tuple' objecthas no attribute 'enumval':M
$7 = 0x1 [FLAG_1]
(gdb) PASS: gdb.python/py-pp-maint.exp: print FLAG_1
New in v2:
- Improved test case, I stole Pedro's example directly. It verifies
that the sorting of enumerators by value works, by checking that
printing FOO_MASK appears as FOO_1 | FOO_2 | FOO_3.
I noticed that I could change the regexps to almost anything and the
tests would still pass. I think it was because of the | in there. I
made them more robust by using string_to_regexp. I used curly braces
{ } instead of quoting marks " " for strings, so that I could use
square brackets [ ] in them without having to escape them all. I also
removed the "message" part of the tests, since they are redundant with
the command, and it's just more maintenance to have to update them.
Tested with Python 2.7 and 3.5.
gdb/ChangeLog:
* python/lib/gdb/printing.py (FlagEnumerationPrinter.__call__):
Fix enumerators sort key function.
gdb/testsuite/ChangeLog:
* gdb.python/py-pp-maint.exp: Change/add enum flag tests.
* gdb.python/py-pp-maint.c (enum flag_enum): Use more complex
enum flag values.
The gnu_vector test case yields a new FAIL on s390x:
FAIL: gdb.base/gnu_vector.exp: verify vector return value
It was introduced by commit 77ae9c1933 "gdb.base/gnu_vector.exp:
Don't test output from the inferior". That commit dropped the special
handling for GDB's inability (on some targets) to set the return value.
This change re-establishes the logic from before, converting the above
FAIL to a KFAIL (PRMS gdb/8549).
gdb/testsuite/ChangeLog:
* gdb.base/gnu_vector.exp: Re-establish handling for should_kfail
when GDB can not set the vector return value. Add more comments
for clarification.
On Ubuntu 14.04 the following failure would be seen when running the
tspeed.exp test on a target that supports fast tracepoints like x86_64:
Target returns error code '.In-process agent library not loaded in
process. Fast and static tracepoints unavailable.'.
(gdb) FAIL: gdb.trace/tspeed.exp: start trace experiment
This is because the default is to link with --as-needed and the
gdb_compile for the test is using the libs argument instead of shlib which
corrects this issue since 6ebea266fd by
adding -Wl,--no-as-needed.
This patch fixes the issue by passing the lib as the shlib argument to
gdb_compile.
Tested on Ubuntu 14.04 x86_64.
gdb/testsuite/ChangeLog:
* gdb.trace/tspeed.exp: Use shlib instead of libs in gdb_compile
command.
PR 19457
* testsuite/ld-scripts/script.exp (extract_symbol_test): Stop test
early for PE based targets.
* testsuite/ld-scripts/align.t: Use 0x1000 as VMA alignment.
* testsuite/ld-pe/tlssec32.d: Allow for relocatable output.
In the instruction to write to the ARMv8.2 PSTATE field UAO,
MSR UAO, #<imm>, the immediate should be either 0 or 1 but GAS accepts
any unsigned 4-bit integer.
This patch implements the constraint on the immediate, generating an
error if the immediate operand is invalid, and adds tests for the
illegal forms.
opcodes/
2016-01-20 Matthew Wahab <matthew.wahab@arm.com>
* aarch64-opc.c (operand_general_constraint_met_p): Check validity
of MSR UAO immediate operand.
gas/
2016-01-20 Matthew Wahab <matthew.wahab@arm.com>
* testsuite/gas/aarch64/armv8_2-a-illegal.d: New.
* testsuite/gas/aarch64/armv8_2-a-illegal.l: New.
* testsuite/gas/aarch64/armv8_2-a-illegal.s: New.
Change-Id: Ibdec4967c00b1ef3be9dbc43d23b2c70d1a0b28c
bfd/ChangeLog:
* elf32-arm.c ((elf32_arm_special_sections): Remove catch of noread
section using '.text.noread' pattern.
gas/ChangeLog:
* config/obj-elf.c (obj_elf_change_section) : Allow arm section with
SHF_ARM_NOREAD section flag.
* config/tc-arm.h (md_elf_section_letter) : Implement this hook to
handle letter 'y'.
(arm_elf_section_letter) : Declare it.
* config/tc-arm.c (arm_elf_section_letter): Handle letter 'y' to set
SHF_ARM_NOREAD section flag.
* doc/c-arm.texi (ARM section attribute 'y'): Document it.
gas/testsuite/ChangeLog:
* gas/arm/section-execute-only.s: New test case.
* gas/arm/section-execute-only.d: Expected output.
ld/testsuite/ChangeLog:
* ld-arm/thumb1-noread-not-present-mixing-two-section.s: Add 'y'
attribute usage.
* ld-arm/thumb1-noread-present-one-section.s: Likewise.
* ld-arm/thumb1-noread-present-two-section.s: Likewise.
* ld-arm/thumb1-input-section-flag-match.s: Likewise.
binutils/ChangeLog:
* readelf.c (get_elf_section_flags): Display y letter for section
with SHF_ARM_NOREAD section flag in readelf section output.
(process_section_headers): Add y letter in readelf section output
key mapping for ARM architecture.
(GNU Coding Standard...)
gdb/ChangeLog:
* printcmd.c (print_scalar_formatted): move binary operator from
end of line to beginning of next line. Adjust formatting
accordingly.
gdb/ChangeLog:
* fbsd-tdep.c (find_stop_signal): Remove.
(struct fbsd_collect_regset_section_cb) <lwp>: New field.
<stop_signal>: New field.
<abort_iteration>: New field.
(fbsd_collect_regset_section_cb): Use new fields.
(fbsd_collect_thread_registers): New function.
(struct fbsd_corefile_thread_data): New structure.
(fbsd_corefile_thread): New function.
(fbsd_make_corefile_notes): Use new function to dump notes for each
non-exited thread in a process.
Older versions of FreeBSD supported userland threading via a pure
user-space threading library (N threads scheduled on 1 process) and
a N:M model (N threads scheduled on M LWPs). However, modern FreeBSD
versions only support a M:M threading model where each user thread is
backed by a dedicated LWP. This thread target only supports this
threading model. It also uses ptrace to query and alter LWP state
directly rather than using libthread_db to simplify the implementation.
FreeBSD recently gained support for reporting LWP events (birth and death
of LWPs). GDB will use LWP events when present. For older systems it
fetches the list of LWPs in the to_update_thread_list target op to update
the list of threads on each stop.
This target supports scheduler locking by using ptrace to suspend
individual LWPs as necessary before resuming a process.
gdb/ChangeLog:
* configure.ac: Check for support for LWP names on FreeBSD.
* fbsd-nat.c [PT_LWPINFO] New variable debug_fbsd_lwp.
[TDP_RFPPWAIT || HAVE_STRUCT_PTRACE_LWPINFO_PL_TDNAME]
(fbsd_fetch_kinfo_proc): Move function earlier.
[PT_LWPINFO] (fbsd_thread_alive): New function.
[PT_LWPINFO] (fbsd_pid_to_str): New function.
[HAVE_STRUCT_PTRACE_LWPINFO_PL_TDNAME] (fbsd_thread_name): New function.
[PT_LWP_EVENTS] (fbsd_enable_lwp_events): New function.
[PT_LWPINFO] (fbsd_add_threads): New function.
[PT_LWPINFO] (fbsd_update_thread_list): New function.
[PT_LWPINFO] New variable super_resume.
[PT_LWPINFO] (resume_one_thread_cb): New function.
[PT_LWPINFO] (resume_all_threads_cb): New function.
[PT_LWPINFO] (fbsd_resume): New function.
(fbsd_remember_child): Save full ptid instead of plain pid.
(fbsd_is_child_pending): Return ptid of saved child process.
(fbsd_wait): Include lwp in returned ptid and switch to LWP ptid on
first stop.
[PT_LWP_EVENTS] Handle LWP events.
[TDP_RFPPWAIT] Include LWP in child ptid.
(fbsd_post_startup_inferior) [PT_LWP_EVENTS]: Enable LWP events.
(fbsd_post_attach) [PT_LWP_EVENTS]: Enable LWP events.
Add threads for existing processes.
(fbsd_nat_add_target) [PT_LWPINFO]: Set "to_thread_alive" to
"fbsd_thread_alive".
Set "to_pid_to_str" to "fbsd_pid_to_str".
[HAVE_STRUCT_PTRACE_LWPINFO_PL_TDNAME]: Set "to_thread_name" to
"fbsd_thread_name".
[PT_LWPINFO]: Set "to_update_thread_list" to "fbsd_update_thread_list".
Set "to_has_thread_control" to "tc_schedlock".
Set "to_resume" to "fbsd_resume".
(_initialize_fbsd_nat): New function.
* configure: Regenerate.
* config.in: Regenerate.
gdb/doc/ChangeLog:
* gdb.texinfo (Debugging Output): Document "set/show debug fbsd-lwp".
