opcodes/
* nios2-opc.c (nios2_builtin_reg): Use "sstatus" rather than "ba"
as the primary name of r30.
gas/
* config/tc-nios2.c (nios2_consume_arg): Make the "ba" warning
also test/refer to "sstatus". Reformat the warning message.
gas/testsuite/
* gas/nios2/warn_nobreak.l: Update text of warning messages.
* gas/nios2/registers.s: Use "sstatus" rather than "ba"
as the primary name of r30.
* gas/nios2/registers.d: Likewise.
2013-10-10 Jan Beulich <jbeulich@suse.com>
* tc-i386-intel.c (i386_intel_simplify_register): Suppress base/index
swapping for bndmk, bndldx, and bndstx.
for "<foo>a". Issue error messages for unrecognised or corrrupt
size extensions.
* gas/msp430/bad.s: New test: Checks erroneous size extensions.
* gas/msp430/bad.d: New test command file.
* gas/msp430/bad.l: New file: Expected error messages.
* gas/msp430/msp430.exp: Run the new test.
* gas/msp430/msp430x.s: Add "<foo>.a" aliases of "<foo>a"
instructions.
* gas/msp430/msp430x.d: Update expected disassembly.
(move_data): New variable.
(md_parse_option): Parse -md.
(msp430_section): New function. Catch references to the .bss or
.data sections and generate a special symbol for use by the libcrt
library.
(md_pseudo_table): Intercept .section directives.
(md_longopt): Add -md
(md_show_usage): Likewise.
(msp430_operands): Generate a warning message if a NOP is inserted
into the instruction stream.
* doc/c-msp430.texi (node MSP430 Options): Document -md option.
The existing code would accept VLD2.64 and similar undefined
instructions.
gas/ChangeLog:
2013-09-16 Will Newton <will.newton@linaro.org>
* config/tc-arm.c (do_neon_ld_st_interleave): Add constraint
disallowing element size 64 with interleave other than 1.
gas/testsuite/ChangeLog:
2013-09-16 Will Newton <will.newton@linaro.org>
* gas/arm/neon-ldst-es.d: Add VLD1.64 instructions.
* gas/arm/neon-ldst-es.s: Likewise.
* testsuite/gas/arm/neon-ldst-es-bad.d: New file.
* testsuite/gas/arm/neon-ldst-es-bad.l: Likewise.
* testsuite/gas/arm/neon-ldst-es-bad.s: Likewise.
* config/tc-ppc.c (md_apply_fix): Handle defined after use toc
symbols.
gas/testsuite/
* gas/ppc/aix.exp: Run xcoff-toc-1 test.
* gas/ppc/xcoff-toc-1.s, gas/ppc/xcoff-toc-1.d: New test.
* config/tc-arm.c (T16_32_TAB): Add _udf.
(do_t_udf): New function.
(insns): Add "udf".
* gas/arm/udf-bad.s: New file.
* gas/arm/udf-bad.d: New file.
* gas/arm/udf-bad.l: New file.
* gas/arm/udf.s: New file.
* gas/arm/udf.d: New file.
* gas/arm/udf.l: New file.
* arm-dis.c (arm_opcodes): Add udf.
(thumb_opcodes): Use "udf" mnemonic rather than UNDEFINED_INSTRUCTION.
(thumb32_opcodes): Add udf.w.
(print_insn_thumb32): Handle %H as the thumb32_opcodes comment says.
NEON vector load and store instructions do not accept immediates
or pre-indexed base plus offset addressing modes, so make sure that
the assembler enforces this.
gas/ChangeLog:
2013-08-23 Will Newton <will.newton@linaro.org>
* config/tc-arm.c (do_neon_ldx_stx): Add extra constraints
for pre-indexed addressing modes.
* testsuite/gas/arm/neon-addressing-bad.l: Add test for
VLDn and VSTn instructions.
* testsuite/gas/arm/neon-addressing-bad.s: Likewise.
gas/testsuite/ChangeLog:
2013-08-23 Will Newton <will.newton@linaro.org>
* testsuite/gas/arm/neon-addressing-bad.l: Add test for
VLDn and VSTn instructions.
* testsuite/gas/arm/neon-addressing-bad.s: Likewise.
* mips.h (M_DEXT, M_DINS): Delete.
opcodes/
* micromips-opc.c (micromips_opcodes): Replace "dext" and "dins"
macro entries with "dextm", "dextu", "dinsm" and "dinsu" aliases.
Use +H rather than +C for the real "dext".
* mips-opc.c (mips_builtin_opcodes): Likewise.
gas/
* config/tc-mips.c (report_bad_range, report_bad_field): Delete.
(macro): Remove M_DEXT and M_DINS handling.
gas/testsuite/
* gas/mips/ext-ill.l, gas/mips/mips64r2-ill.l: Expect DEXT and DINS
error messages to have the same form as the EXT and INS ones.
* gas/mips/micromips-insn32.d, gas/mips/micromips-noinsn32.d,
gas/mips/micromips-trap.d, gas/mips/micromips.d,
gas/mips/micromips@mips64r2.d, gas/mips/mips64r2.d: Expect
"dext" and "dins" instead of "dextm", "dextu", "dinsm" and "dinsu".
* config/tc-mips.c (mips_arg_info): Replace allow_nonconst and
lax_max with lax_match.
(match_int_operand): Update accordingly. Don't report an error
for !lax_match-only cases.
(match_insn): Replace more_alts with lax_match and use it to
initialize the mips_arg_info field. Add a complete_p parameter.
Handle implicit VU0 suffixes here.
(match_invalid_for_isa, match_insns, match_mips16_insns): New
functions.
(mips_ip, mips16_ip): Use them.
* config/tc-mips.c (mips_arg_info): Remove soft_match.
(match_out_of_range, match_not_constant): New functions.
(match_const_int): Remove fallback parameter and check for soft_match.
Use match_not_constant.
(match_mapped_int_operand, match_addiusp_operand)
(match_perf_reg_operand, match_save_restore_list_operand)
(match_mdmx_imm_reg_operand): Update accordingly. Use
match_out_of_range and set_insn_error* instead of as_bad.
(match_int_operand): Likewise. Use match_not_constant in the
!allows_nonconst case.
(match_float_constant): Report invalid float constants.
(match_insn, match_mips16_insn): Remove soft_match code. Rely on
match_float_constant to check for invalid constants. Fail the
match if match_const_int or match_float_constant return false.
(mips_ip): Update accordingly.
(mips16_ip): Likewise. Undo null termination of instruction name
once lookup is complete.
gas/testsuite/
* gas/mips/ext-ill.l, gas/mips/lui-1.l, gas/mips/mips16e-64.l,
gas/mips/mips32r2-ill-fp64.l, gas/mips/mips32r2-ill-nofp.l,
gas/mips/mips32r2-ill.l, gas/mips/mips64r2-ill.l,
gas/mips/octeon-ill.l, gas/mips/r5900-error-vu0.l,
gas/mips/vr5400-ill.l: Adjust expected errors.
* gas/mips/micromips-size-0.l,
gas/mips/micromips-size-0.s: Likewise. Add new tests.
* gas/mips/mips16e-save-err.s, gas/mips/mips16e-save-err.l: New test.
* gas/mips/mips.exp: Run it.
* config/tc-mips.c (mips_insn_error_format): New enum.
(mips_insn_error): New struct.
(insn_error): Change to a mips_insn_error.
(clear_insn_error, set_insn_error_format, set_insn_error)
(set_insn_error_i, set_insn_error_ss, report_insn_error): New
functions.
(mips_parse_argument_token, md_assemble, match_insn)
(match_mips16_insn): Use them instead of manipulating insn_error
directly.
(mips_ip, mips16_ip): Likewise. Simplify control flow.
gas/testsuite/
* gas/mips/micromips-ill.l: Expect "floating-point expression required"
* config/tc-mips.c (normalize_constant_expr): Move further up file.
(normalize_address_expr): Likewise.
(match_insn, match_mips16_insn): New functions, split out from...
(mips_ip, mips16_ip): ...here.
2013-08-06 Jürgen Urban <JuergenUrban@gmx.de>
* mips-opc.c (mips_builtin_opcodes): Add a suffixless version of
VCLIPW.
gas/
2013-08-06 Jürgen Urban <JuergenUrban@gmx.de>
* config/tc-mips.c (match_vu0_suffix_operand): Allow single-channel
suffixes to be elided too.
(mips_lookup_insn): Don't reject INSN2_VU0_CHANNEL_SUFFIX here.
(mips_ip): Assume .xyzw if no VU0 suffix is specified. Allow +N
to be omitted too.
gas/testsuite/
2013-08-06 Jürgen Urban <JuergenUrban@gmx.de>
* gas/mips/r5900-error-vu0.s, gas/mips/r5900-error-vu0.l,
gas/mips/r5900-full-vu0.s, gas/mips/r5900-full-vu0.d: Allow
single-channel suffixes to be elided.
2013-08-04 Jürgen Urban <JuergenUrban@gmx.de>
Richard Sandiford <rdsandiford@googlemail.com>
* mips.h: Document new VU0 operand characters.
(OP_VU0_SUFFIX, OP_VU0_MATCH_SUFFIX): New mips_operand_types.
(OP_REG_VF, OP_REG_VI, OP_REG_R5900_I, OP_REG_R5900_Q, OP_REG_R5900_R)
(OP_REG_R5900_ACC): New mips_reg_operand_types.
(INSN2_VU0_CHANNEL_SUFFIX): New macro.
(mips_vu0_channel_mask): Declare.
opcodes/
2013-08-04 Jürgen Urban <JuergenUrban@gmx.de>
Richard Sandiford <rdsandiford@googlemail.com>
* mips-dis.c (print_reg): Handle OP_REG_VI, OP_REG_VF, OP_REG_R5900_I,
OP_REG_R5900_Q, OP_REG_R5900_R and OP_REG_R5900_ACC.
(print_vu0_channel): New function.
(print_insn_arg): Handle OP_VU0_SUFFIX and OP_VU0_MATCH_SUFFIX.
(print_insn_args): Handle '#'.
(print_insn_mips): Handle INSN2_VU0_CHANNEL_SUFFIX.
* mips-opc.c (mips_vu0_channel_mask): New constant.
(decode_mips_operand): Handle new VU0 operand types.
(VU0, VU0CH): New macros.
(mips_builtin_opcodes): Add VU0 opcodes. Use "+7" rather than "E"
for LQC2 and SQC2. Use "+9" rather than "G" for EE CFC2 and CTC2.
Use "+6" rather than "G" for QMFC2 and QMTC2.
gas/
2013-08-04 Jürgen Urban <JuergenUrban@gmx.de>
Richard Sandiford <rdsandiford@googlemail.com>
* config/tc-mips.c (MAX_OPERANDS): Bump to 6.
(RWARN): Bump to 0x8000000.
(RTYPE_VI, RTYPE_VF, RTYPE_R5900_I, RTYPE_R5900_Q, RTYPE_R5900_R)
(RTYPE_R5900_ACC): New register types.
(RTYPE_MASK): Include them.
(R5900_I_NAMES, R5900_Q_NAMES, R5900_R_NAMES, R5900_ACC_NAMES): New
macros.
(reg_names): Include them.
(mips_parse_register_1): New function, split out from...
(mips_parse_register): ...here. Add a channels_ptr parameter.
Look for VU0 channel suffixes when nonnull.
(reg_lookup): Update the call to mips_parse_register.
(mips_parse_vu0_channels): New function.
(OT_CHANNELS, OT_DOUBLE_CHAR): New mips_operand_token_types.
(mips_operand_token): Add a "channels" field to the union.
Extend the comment above "ch" to OT_DOUBLE_CHAR.
(mips_parse_base_start): Match -- and ++. Handle channel suffixes.
(mips_parse_argument_token): Handle channel suffixes here too.
(validate_mips_insn): Handle INSN2_VU0_CHANNEL_SUFFIX.
Ignore OP_VU0_MATCH_SUFFIX when calculating the used bits.
Handle '#' formats.
(md_begin): Register $vfN and $vfI registers.
(operand_reg_mask): Handle OP_VU0_SUFFIX and OP_VU0_MATCH_SUFFIX.
(convert_reg_type): Handle OP_REG_VI, OP_REG_VF, OP_REG_R5900_I,
OP_REG_R5900_Q, OP_REG_R5900_R and OP_REG_R5900_ACC.
(match_vu0_suffix_operand): New function.
(match_operand): Handle OP_VU0_SUFFIX and OP_VU0_MATCH_SUFFIX.
(macro): Use "+7" rather than "E" for LDQ2 and STQ2.
(mips_lookup_insn): New function.
(mips_ip): Use it. Allow "+K" operands to be elided at the end
of an instruction. Handle '#' sequences.
gas/testsuite/
2013-08-04 Jürgen Urban <JuergenUrban@gmx.de>
* gas/mips/r5900-vu0.d: Expect $vfN and $viN instead of numeric
coprocessor registers.
* gas/mips/r5900-all-vu0.s, gas/mips/r5900-all-vu0.d,
gas/mips/r5900-full-vu0.s, gas/mips/r5900-full-vu0.d,
gas/mips/r5900-error-vu0.s, gas/mips/r5900-error-vu0.l: New tests.
* gas/mips/mips.exp: Run them.
* mips.h (mips_pcrel_operand): Inherit from mips_int_operand.
(mips_int_operand_min, mips_int_operand_max): New functions.
(mips_decode_pcrel_operand): Use mips_decode_int_operand.
opcodes/
* mips-formats.h (PCREL): Reorder parameters and update the definition
to match new mips_pcrel_operand layout.
(JUMP, JALX, BRANCH): Update accordingly.
* mips16-opc.c (decode_mips16_operand): Likewise.
gas/
* config/tc-mips.c (match_int_operand): Use mips_int_operand_min
and mips_int_operand_max.
(mips16_immed_operand, mips16_immed_operands, MIPS16_NUM_IMMED):
Delete.
(mips16_immed_operand, mips16_immed_in_range_p): New functions.
(mips16_immed, mips16_extended_frag): Use them. Use mips_int_operand
instead of mips16_immed_operand.
* config/tc-mips.c (mips16_macro): Don't use move_register.
(mips16_ip): Allow macros to use 'p'.
gas/testsuite/
* gas/mips/mips16-macro.s, gas/mips/mips16-macro.d: New test.
* gas/mips/mips.exp: Run it.
* mips.h (MIPS16_INSN_WRITE_SP, MIPS16_INSN_READ_31)
(MIPS16_INSN_READ_PC, MIPS16_INSN_UNCOND_BRANCH)
(MIPS16_INSN_COND_BRANCH): Delete.
opcodes/
* mips16-opc.c (UBR, CBR, RD_31, RD_PC): Redefine as INSN2_* flags.
(WR_SP): Replace with...
(MOD_SP): ...this.
(mips16_opcodes): Update accordingly.
* mips-dis.c (print_insn_mips16): Likewise.
gas/
* config/tc-mips.c (compact_branch_p, uncond_branch_p): Use the same
flags for MIPS16 and non-MIPS16 instructions.
(gpr_mod_mask): Move the INSN2_MOD_SP case outside the micromips block.
(gpr_read_mask): Use INSN2_READ_GPR_31 for MIPS16 instructions too.
(gpr_write_mask): Remove MIPS16_INSN_WRITE_SP handling.
(can_swap_branch_p, get_append_method): Use the same flags for MIPS16
and non-MIPS16 instructions. Fix formatting.
