Working on splitting gdb and inferior output handling in this test, I
noticed a race that happens to be masked out today.
The test sends "a\n" to the inferior, and then inferior echoes back
"a\n".
If expect manages to read only the first "a\r\n" into its buffer, then
this matches:
-re "^a\r\n(|a\r\n)$" {
and leaves the second "a\r\n" in output.
Then the next test that processes inferior I/O sends "data\n", and expects:
-re "^(\r\n|)data\r\n(|data\r\n)$"
which fails given the anchor and given "a\r\n" is still in the buffer.
This is masked today because the test relies on inferior I/O being
done on GDB's terminal, and there are tested GDB commands in between,
which consume the "a\r\n" that was left in the output.
We don't support SunOS4 anymore, so just remove the workaround.
gdb/testsuite/ChangeLog
2015-04-07 Pedro Alves <palves@redhat.com>
* gdb.base/interrupt.exp: Don't handle the case of the inferior
output appearing once only.
I saw this on PPC64 once:
not installed on target
(gdb) PASS: gdb.trace/actions.exp: 5.10a: verify teval actions set for two tracepoints
break main
Breakpoint 4 at 0x10000c6c: file ../../../src/gdb/testsuite/gdb.trace/actions.c, line 139.
(gdb) PASS: gdb.trace/actions.exp: break main
run
Starting program: /home/palves/gdb/build/gdb/testsuite/outputs/gdb.trace/actions/actions
tstatus
Breakpoint 4, main (argc=1, argv=0x3fffffffebb8, envp=0x3fffffffebc8) at ../../../src/gdb/testsuite/gdb.trace/actions.c:139
139 begin ();
(gdb) tstatus
Trace can not be run on this target.
(gdb) actions 1
Enter actions for tracepoint 1, one per line.
End with a line saying just "end".
>collect $regs
>end
(gdb) PASS: gdb.trace/actions.exp: set actions for first tracepoint
tstart
You can't do that when your target is `native'
(gdb) FAIL: gdb.trace/actions.exp: tstart
info tracepoints 1
Num Type Disp Enb Address What
1 tracepoint keep y 0x00000000100007c8 in gdb_c_test at ../../../src/gdb/testsuite/gdb.trace/actions.c:74
collect $regs
not installed on target
...
followed by a cascade of FAILs. The "tstatus" was supposed to detect
that this target (native) can't do tracepoints, but, alas, it didn't.
That detection failed because 'gdb_test "break main"' doesn't expect
anything, and then the output was slow enough that 'gdb_test ""
"Breakpoint .*"' matched the output of "break main"...
The fix is to use gdb_breakpoint instead. Also check the result of
gdb_test while at it.
Tested on x86-64 Fedora 20, native and gdbserver.
gdb/testsuite/ChangeLog:
2015-04-07 Pedro Alves <palves@redhat.com>
* gdb.trace/actions.exp: Use gdb_breakpoint instead of gdb_test
that doesn't expect anything. Return early if running to main
fails.
ld * ld.h (struct ld_config_type): Add new field: warn_orphan.
* ldlex.h (enum option_values): Add OPTION_WARN_ORPHAN and
OPTION_NO_WARN_ORPHAN.
* lexsup.c (ld_options): Add --warn-orphan and --no-warn-orphan.
(parse_args): Handle the new options.
* ldemul.c (ldemul_place_orphan): If requested, generate a warning
message when an orphan section is placed in the output file.
* ld.texinfo: Document the new option.
* NEWS: Mention the new feature.
tests * ld-elf/orphan-5.l: New test - checks the linker's output with
--warn-orphan enabled.
* ld-elf/elf.exp: Run the new test.
On GNU/Linux, if the running kernel supports clone events, then
linux-thread-db.c defers thread listing to the target beneath:
static void
thread_db_update_thread_list (struct target_ops *ops)
{
...
if (target_has_execution && !thread_db_use_events ())
ops->beneath->to_update_thread_list (ops->beneath);
else
thread_db_update_thread_list_td_ta_thr_iter (ops);
...
}
However, when live debugging, the target beneath, linux-nat.c, does
not implement the to_update_thread_list method. The result is that if
a thread is marked exited (because it can't be deleted right now,
e.g., it was the selected thread), then it won't ever be deleted,
until the process exits or is killed/detached.
A similar thing happens with the remote.c target. Because its
target_update_thread_list implementation skips exited threads when it
walks the current thread list looking for threads that no longer exits
on the target side, using ALL_NON_EXITED_THREADS_SAFE, stale exited
threads are never deleted.
This is not a big deal -- I can't think of any way this might be user
visible, other than gdb's memory growing a tiny bit whenever a thread
gets stuck in exited state. Still, might as well clean things up
properly.
All other targets use prune_threads, so are unaffected.
The fix adds a ALL_THREADS_SAFE macro, that like
ALL_NON_EXITED_THREADS_SAFE, walks the thread list and allows deleting
the iterated thread, and uses that in places that are walking the
thread list in order to delete threads. Actually, after converting
linux-nat.c and remote.c to use this, we find the only other user of
ALL_NON_EXITED_THREADS_SAFE is also walking the list to delete
threads. So we convert that too, and end up deleting
ALL_NON_EXITED_THREADS_SAFE.
Tested on x86_64 Fedora 20, native and gdbserver.
gdb/ChangeLog
2015-04-07 Pedro Alves <palves@redhat.com>
* gdbthread.h (ALL_NON_EXITED_THREADS_SAFE): Rename to ...
(ALL_THREADS_SAFE): ... this, and don't skip exited threads.
(delete_exited_threads): New declaration.
* infrun.c (follow_exec): Use ALL_THREADS_SAFE.
* linux-nat.c (linux_nat_update_thread_list): New function.
(linux_nat_add_target): Install it.
* remote.c (remote_update_thread_list): Use ALL_THREADS_SAFE.
* thread.c (prune_threads): Use ALL_THREADS_SAFE.
(delete_exited_threads): New function.
Fixes tic6x testsuite failures due to .rela.plt having a zero sh_info.
I considered passing link_info to get_reloc_section so we could
directly return the .got.plt output section, but we need the fallback
to name lookup anyway for objcopy.
bfd/
* elf.c (_bfd_elf_get_reloc_section): Allow for .got.plt being
mapped to output .got section.
ld/testsuite/
* ld-arm/tls-gdesc-nlazy.g: Adjust for readelf note.
* ld-tic6x/shlib-1.rd: Expect corrected .rela.plt sh_info.
* ld-tic6x/shlib-1b.rd: Likewise.
* ld-tic6x/shlib-1r.rd: Likewise.
* ld-tic6x/shlib-1rb.rd: Likewise.
* ld-tic6x/shlib-app-1.rd: Likewise.
* ld-tic6x/shlib-app-1b.rd: Likewise.
* ld-tic6x/shlib-app-1r.rd: Likewise.
* ld-tic6x/shlib-app-1rb.rd: Likewise.
* ld-tic6x/shlib-noindex.rd: Likewise.
This is a linker-only solution to the incompatibility between shared
library protected visibility variables and using .dynbss and copy
relocs for non-PIC access to shared library variables.
bfd/
* elf32-ppc.c (struct ppc_elf_link_hash_entry): Add has_addr16_ha
and has_addr16_lo. Make has_sda_refs a bitfield.
(ppc_elf_check_relocs): Set new flags.
(ppc_elf_link_hash_table_create): Update default_params.
(ppc_elf_adjust_dynamic_symbol): Clear protected_def in cases
where we won't be making .dynbss entries or editing code. Set
params->pic_fixup when we'll edit code for protected var access.
(allocate_dynrelocs): Allocate got entry for edited code and
discard dyn_relocs.
(struct ppc_elf_relax_info): Add picfixup_size.
(ppc_elf_relax_section): Rename struct one_fixup to struct
one_branch_fixup. Rename fixups to branch_fixups. Size space for
pic fixups.
(ppc_elf_relocate_section): Edit non-PIC accessing protected
visibility variables to PIC. Don't emit dyn_relocs for code
we've edited.
* elf32-ppc.h (struct ppc_elf_params): Add pic_fixup.
ld/
* emultempl/ppc32elf.em: Handle --no-pic-fixup.
(params): Init new field.
(ppc_before_allocation): Enable relaxation for pic_fixup.
Although not currently possible in practice when we get here,
'resume_ptid' can also be a wildcard throughout this function. It's
clearer to fetch the regcache using the thread's ptid.
gdb/ChangeLog:
2015-04-07 Pedro Alves <pedro@codesourcery.com>
* infrun.c (resume) <displaced stepping debug output>: Get the
leader thread's regcache, not resume_ptid's.
Nowadays, the alarm value is 60, and alarm is generated on some slow
boards. This patch is to pass DejaGNU timeout value to the program,
and move the alarm call before going to infinite loop. If any thread
has activities, the alarm is reset.
gdb/testsuite:
2015-04-07 Yao Qi <yao.qi@linaro.org>
* gdb.threads/non-stop-fair-events.c (SECONDS): New macro.
(child_function): Call alarm.
(main): Move call to alarm into the loop.
* gdb.threads/non-stop-fair-events.exp: Build program with
-DTIMEOUT=$timeout.
The "dest" parameter to fpc_compile/gpc_compile is the name of
compilation destination file, not a board name.
This patch fixes this by using names consistent with
lib/future.exp:gdb_default_target_compile.
gdb/testsuite/ChangeLog:
* lib/pascal.exp (gpc_compile): Rename dest arg to destfile.
Fix dest parameter to board_info.
(fpc_compile): Ditto.
(gdb_compile_pascal): Rename dest arg to destfile.
gdb/ChangeLog:
* symtab.c (hash_symbol_entry): Hash STRUCT_DOMAIN symbols as
VAR_DOMAIN.
(symbol_cache_lookup): Clarify use of bsc_ptr, slot_ptr parameters.
Include symbol domain in debugging output.
Currently building gdb is impossible without an installed termcap or
curses library. But, GDB already has a very minimal termcap in the
tree to handle this situation for Windows -- gdb/stub-termcap.c. This
patch makes that the fallback for all hosts.
Testing this on GNU/Linux (by simply hacking away the termcap/curses
detection in gdb/configure.ac), we trip on:
../readline/libreadline.a(terminal.o): In function `_rl_init_terminal_io':
/home/pedro/gdb/mygit/src/readline/terminal.c:527: undefined reference to `PC'
/home/pedro/gdb/mygit/src/readline/terminal.c:528: undefined reference to `BC'
/home/pedro/gdb/mygit/src/readline/terminal.c:529: undefined reference to `UP'
/home/pedro/gdb/mygit/src/readline/terminal.c:538: undefined reference to `PC'
/home/pedro/gdb/mygit/src/readline/terminal.c:539: undefined reference to `BC'
/home/pedro/gdb/mygit/src/readline/terminal.c:540: undefined reference to `UP'
These are globals that are normally defined by termcap (or ncurses'
termcap emulation).
Now, we could just define replacements in stub-termcap.c, but
readline/terminal.c (at least the copy in our tree) has this:
#if !defined (__linux__) && !defined (NCURSES_VERSION)
# if defined (__EMX__) || defined (NEED_EXTERN_PC)
extern
# endif /* __EMX__ || NEED_EXTERN_PC */
char PC, *BC, *UP;
#endif /* !__linux__ && !NCURSES_VERSION */
which can result in readline defining the globals too. That will
usually work out in C, given that "-fcommon" is usually the default
for C compilers, but that won't work for C++, or C with -fno-common
(link fails with "multiple definition" errors)...
Mirroring those #ifdef conditions in the stub termcap screams
"brittle" to me -- I can see them changing in latter readline
versions.
Work around that by simply using __attribute__((weak)).
Windows/PE/COFF's do support weak, but not on gcc 3.4 based toolchains
(4.8.x does work). Given the file never needed the variables while it
was Windows-only, just continue not defining them there. All other
supported hosts should support this.
gdb/ChangeLog:
2015-04-06 Pedro Alves <palves@redhat.com>
Bernd Edlinger <bernd.edlinger@hotmail.de>
* configure.ac: Remove the mingw32-specific stub-termcap.o
fallback, and instead fallback to the stub termcap on all hosts.
* configure: Regenerate.
* stub-termcap.c [!__MINGW32__] (PC, BC, UP): Define as weak
symbols.
There is no need to generate compressed debug section if compressed
section size is the same as before compression. We should xfail the
compressed debug section test if there are no compressed sections
binutils/testsuite/
* binutils-all/compress.exp (compression_used): New.
Xfail test if compression didn't make the section smaller.
gas/
2015-04-05 H.J. Lu <hongjiu.lu@intel.com>
* write.c (compress_debug): Don't write the zlib header if
compressed section size is the same as before compression.
The nrun conversion was slightly incorrect in how it stopped when an
exception occurred. We still set cpu.asregs.exception, but nothing
was checking it anymore. Convert all of that to sim_engine_halt.
To keep things from regressing again, add a basic testsuite too.
For objcopy and relocatable link, we should also preserve the
SHF_COMPRESSED bit if not decompress.
* elf.c (_bfd_elf_init_private_section_data): Also preserve the
SHF_COMPRESSED bit if not decompress.
This paramater is no longer useful after the previous commit, so remove
it as a cleanup.
gdb/ChangeLog:
* gdbtypes.c (is_dynamic_type_internal): Remove the unused
"top_level" parameter.
(resolve_dynamic_type_internal): Remove the unused "top_level"
parameter. Update call to is_dynamic_type_internal.
(is_dynamic_type): Update call to is_dynamic_type_internal.
(resolve_dynamic_range): Update call to
resolve_dynamic_type_internal.
(resolve_dynamic_union): Likewise.
(resolve_dynamic_struct): Likewise.
(resolve_dynamic_type): Likewise.
Even when referenced types are dynamic, the corresponding referencing
type should not be considered as dynamic: it's only a pointer. This
prevents reference type for values not in memory to be resolved.
gdb/ChangeLog:
* gdbtypes.c (is_dynamic_type_internal): Remove special handling
of TYPE_CODE_REF types so that they are not considered as
dynamic depending on the referenced type.
(resolve_dynamic_type_internal): Likewise.
gdb/testsuite/ChangeLog:
* gdb.ada/funcall_ref.exp: New file.
* gdb.ada/funcall_ref/foo.adb: New file.
Way back in aba6488e0b, a bunch of signal
defines were changed to TARGET_SIGNAL_xxx. For d10v, the transition was
incomplete which lead to sim_stop_reason using the new set but sim_resume
still using the old set. Which meant in some cases, the sim would never
actually stop.
Convert all the remaining SIGxxx defines in here to TARGET_SIGNAL_xxx.
This has the nice side effect of fixing the testsuite.
2015-03-27 Renlin Li <renlin.li@arm.com>
gas/
* config/tc-aarch64.c (mapping_state): Emit MAP_DATA within text section in order.
(mapping_state_2): Don't emit MAP_DATA here.
(s_aarch64_inst): Align frag during state transition.
(md_assemble): Likewise.
