This partially reverts commits:
105dd264de3df3af7c3fc4892a6b379e3042ec07
Now that dv-sockser is handled entirely by the common build logic, the
failure these targets were hitting isn't really possible anymore. Lets
reset their hardware status back to defaulting to on. Some of these
were set to "always" previously, but we don't support that anymore.
The current default handling for the --enable-sim-hardware option ends up
forcing the value to whatever is set as the first argument when calling
the macro (by virtue of how autoconf works). Relocate the setup code to
the 4th parameter of the AC_ARG_ENABLE macro to fix it.
This was caused by the simplification work in 1517bd2742.
Reported-by: Hans-Peter Nilsson <hans-peter.nilsson@axis.com>
Since no sim is using the "always" option to SIM_AC_OPTION_HARDWARE, and
we don't want to require hw support to always be enabled, drop the option.
This leads to a slight simplification in the macro too as we can collapse
the sim_hw_p variable.
This looks like copy & paste logic from the m32r port (and history
suggests this as well). Since building with hw & device support
enabled leads to failures:
sim/frv/devices.c: In function 'device_io_read_buffer':
sim/frv/devices.c:39:15: error: 'UART_INCHAR_ADDR' undeclared (first use in this function)
Delete it entirely. We leave device support in place as it is used
to flush the scache.
The "set serial parity" command allows the user to control which
parity to use when communicating over a serial connection, rather
than having the parity hardcoded to none.
gdb/ChangeLog:
* NEWS: Mention set/show serial parity command.
* monitor.c (monitor_open): Call serial_setparity.
* remote.c (remote_open_1): Likewise.
* ser-base.c (ser_base_serparity): New function.
* ser-base.h (ser_base_setparity): Add declaration.
* ser-go32.c (dos_ops): Set "setparity" field.
* ser-mingw.c (ser_windows_raw): Do not set state.fParity and
state.Parity.
(ser_windows_setparity): New function.
(hardwire_ops): Add ser_windows_setparity.
(tty_ops): Add NULL for setparity field.
(pipe_ops): Add ser_base_setparity.
(tcp_ops): Likewise.
* ser-pipe.c (pipe_ops): Likewise.
* ser-tcp.c (tcp_ops): Likewise.
* ser-unix.c (hardwire_setparity): Add declaration.
(hardwire_raw): Don't reset PARENB flag.
(hardwire_setparity): New function.
(hardwire_ops): Add hardwire_setparity.
* serial.c (serial_setparity): New function.
(serial_parity): New global.
(parity_none, parity_odd, parity_even, parity_enums, parity):
New static globals.
(set_parity): New function.
(_initialize_serial): Add set/show serial parity commands.
* serial.h (GDBPARITY_NONE): Define.
(GDBPARITY_ODD): Define.
(GDBPARITY_EVEN): Define.
(serial_setparity) Add declaration.
(struct serial_ops): Add setparity field.
* target.h (serial_parity): Add declaration.
gdb/doc/ChangeLog:
* gdb.texinfo (Remote configuration): Document "set/show
serial parity" command.
This patch changes the heuristic the linespec lexer uses to
detect a keyword in the input stream.
Currently, the heuristic is: a word is a keyword if it
1) points to a string that is a keyword
2) is followed by a non-identifier character
This is strictly more correct than using whitespace. For example,
it allows constructs such as "break foo if(i == 1)". However,
find_condition_and_thread in breakpoint.c does not support this expanded
usage. It requires whitespace to follow the keyword.
The proposed new heuristic is: a word is a keyword if it
1) points to a string that is a keyword
2) is followed by whitespace
3) is not followed by another keyword string followed by whitespace
This additional complexity allows constructs such as
"break thread thread 3" and "break thread 3". In the former case,
the actual location is a symbol named "thread" to be set on thread #3.
In the later case, the location is NULL, i.e., the default location,
to be set on thread #3.
In order to pass all the new tests added here, I've also had to add a
new feature to parse_breakpoint_sals, which expands recognition of the
default location to keywords other than "if", which is the only keyword
currently permitted with the default (NULL) location, but there is no
reason to exclude other keywords.
Consequently, it will be possible to use "break thread 1" or
"break task 1".
In addition to all of this, it is now possible to remove the keyword_ok
state from the linespec parser.
gdb/ChangeLog
* breakpoint.c (parse_breakpoint_sals): Use
linespec_lexer_lex_keyword to ascertain if the user specified
a NULL location.
* linespec.c [IF_KEYWORD_INDEX]: Define.
(linespec_lexer_lex_keyword): Export.
(struct ls_parser) <keyword_ok>: Remove.
A keyword is only a keyword if not followed by another keyword.
(linespec_lexer_lex_one): Remove keyword_ok handling.
Add comment explaining why the parsing stream is not advanced
when a keyword is seen.
(parse_linespec): Remove parser->keyword_ok.
* linespec.h (linespec_lexer_lex_keyword): Add declaration.
gdb/testsuite/ChangeLog
* gdb.linespec/keywords.c: New file.
* gdb.linespec/keywords.exp: New file.
This bug appears to be caused by bad debuginfo. The method
causing the sefault in the reporter's test case is marked both static
and virtual.
This patch simply safegaurds against this case in dwarf2_add_member_fn,
where the code assumes that there is a `this' pointer when a virtual method
is seen (more specifically, when DW_AT_vtable_elem is seen).
It previously dereferenced the first formal parameter
(`this' pointer), which in this case doesn't exist. GDB consequently
segfaulted dereferencing a NULL pointer.
gdb/ChangeLog
PR gdb/18021
* dwarf2read.c (dwarf2_add_member_fn): Issue a complaint
if we find a static method with DW_AT_vtable_elem_location.
gdb/testsuite/ChangeLog
PR gdb/18021
* gdb.dwarf2/staticvirtual.exp: New test.
Now that Input_merge_map has an Output_section_data, we can use it in
implementing find_merge_section and replace the only use of is_merge_section_for
with it.
If dv-sockser is available, lets add it to the common SIM_HW_OBJS
variable so it is always included automatically. Now ports do not
have to shoe horn it in directly themselves. It does mean it will
be compiled for targets that don't explicitly use it, but that's
really what we want anyways.
This lets ports assume that the dv-sockser API is always available if
they want to. This way we don't have to do an abort at configure time
and it makes the resulting code a bit simpler.
There are two cases to support, one with an SIB-form (6-byte) LEA,
the other with a 5-byte LEA and a NOP after the call __tls_get_addr.
Gold did not yet support the second case. This patch adds that
support.
gold/
PR gold/18106
* i386.cc (Target_i386::Relocate::tls_gd_to_ie): Fix support for
non-SIB form of lea, with nop after the call.
When calculating the padding necessary to align the end of the relro
segment to a page boundary, gold erroneously ignores the .tdata section
when checking to see if there are any relro sections (so if .tdata
is the only relro section, we fail to align the segment properly),
and erroneously pads the cumulative size of the segment based on
the alignment of .tbss. If there are no relro sections following .tbss,
it then fails to note the padding needed at the end of .tdata.
This patch fixes both problems. is_first_section_relro() will return
true when it sees a .tdata section, and we do not align the cumulative
size until after checking for the .tbss section.
gold/
PR gold/14217
* output.cc (Output_segment::is_first_section_relro): Don't ignore
.tdata section.
(Output_segment::set_section_addresses): Don't align size of relro
segment for .tbss.
Tail optimization of string pools (enabled when linker is run with -O2
or greater) should not be done when the section alignment is greater
than the size of the characters in the strings; otherwise, unaligned
strings may result.
gold/
PR gold/18010
* stringpool.cc (Stringpool_template): Don't optimize if section
alignment is greater than sizeof(char).
This patch fixes INCLUDE directives in script files, so that when
an INCLUDE appears inside a sections block, section commands block,
or memory def block, the contents are parsed in the appropriate
context.
gold/
PR gold/18048
* script-c.h (script_include_directive): Add first_token parameter.
* script.cc (script_include_directive): Add first_token parameter, and
pass it to read_script_file.
* yyscript.y (PARSING_SECTIONS_BLOCK, PARSING_SECTION_CMDS)
(PARSING_MEMORY_DEF): New tokens.
(top): Add new productions for INCLUDE files.
(file_cmd): Replace file_or_sections_cmd with copy of its productions.
Pass PARSING_LINKER_SCRIPT to script_include_directive.
(section_block_cmd): Likewise; pass PARSING_SECTIONS_BLOCK.
(section_cmd): Pass PARSING_SECTION_CMDS.
(file_or_sections_cmd): Remove.
(memory_def): Pass PARSING_MEMORY_DEF.
* testsuite/Makefile.am (memory_test_2): New test.
* testsuite/Makefile.in: Regenerate.
* testsuite/memory_test_inc.t: New script file.
* testsuite/memory_test_inc_1.t.src: New script file.
* testsuite/memory_test_inc_2.t.src: New script file.
* testsuite/memory_test_inc_3.t.src: New script file.
This patch adds support for reading compressed debug info in
shared objects. It actually simplifies things, by moving the
support for compressed sections all the way up to the top-level
Object class, eliminating the need for several virtual methods.
gold/
* dwp.cc (Sized_relobj_dwo::do_section_contents): Delete.
(Sized_relobj_dwo::setup): Build compressed section map.
(Sized_relobj_dwo::do_decompressed_section_contents): Delete.
* dynobj.cc (Sized_dynobj::base_read_symbols): Build compressed
section map.
* object.cc (Sized_relobj_file::Sized_relobj_file): Remove
compressed_sections_ field.
(build_compressed_section_map): Take Object instead of
Sized_relobj_file parameter; add decompress_if_needed parameter.
(Sized_relobj_file::do_find_special_sections): Store compressed
section map in parent Object.
(Sized_relobj_file::do_decompressed_section_contents): Move
implementation to Object::decompressed_section_contents.
(Sized_relobj_file::do_discard_decompressed_sections): Move
implementation to Object::discard_decompressed_sections.
* object.h (build_compressed_section_map): Declare.
(Object::Object): Add compressed_sections_ field.
(Object::section_is_compressed): Move implementation here.
(Object::decompressed_section_contents): De-virtualize.
(Object::discard_decompressed_sections): De-virtualize.
(Object::do_section_is_compressed): Delete.
(Object::do_decompressed_section_contents): Delete.
(Object::set_compressed_sections): New method.
(Object::compressed_sections): New method.
(Object::compressed_sections_): New data member.
(Compressed_section_info, Compressed_section_map): Move to top of file.
(Sized_relobj_file::do_section_is_compressed): Delete.
(Sized_relobj_file::do_decompressed_section_contents): Delete.
(Sized_relobj_file::do_discard_decompressed_sections): Delete.
(Sized_relobj_file::compressed_sections_): Move to Object class.
In a previous patch for PR 14675, to fix a problem with
the .eh_frame section when static linking, I added a step to
finalize the .eh_frame section at the end of the first link
pass. This patch caused PR 18152, where a plugin-claimed
object caused a non-claimed object's layout to be deferred
until replacement files were read. The call to
finalize_eh_frame_section() is happening before the layout of
the deferred objects, leading to the internal error in
do_relocate_sections.
This patch moves the finalization of the .eh_frame section to
after deferred objects have been processed.
gold/
PR gold/14675
PR gold/18152
* gold.cc (queue_middle_tasks): Finalize .eh_frame after laying out
deferred objects.
gdb/ChangeLog:
* tui/tui-io.c (tui_expand_tabs): Reinitialize the column counter
before the second loop, to avoid undefined behavior. Reported by
Anton Blanchard <anton@samba.org>.
This patch introduces a linked list for dynamic attributes of a type.
This is a pre-work for the Fortran dynamic array support. The Fortran
dynamic array support will add more dynamic attributes to a type.
As only a few types will have such dynamic attributes set, a linked
list is more efficient in terms of memory consumption than adding
multiple attributes to main_type.
gdb/ChangeLog:
* gdbtypes.c (resolve_dynamic_type_internal): Adapt
data_location usage to linked list.
(resolve_dynamic_type_internal): Adapt data_location to
linked list.
(get_dyn_prop, add_dyn_prop, copy_dynamic_prop_list): New function.
(copy_type_recursive, copy_type): Add copy of linked list.
* gdbtypes.h (enum dynamic_prop_node_kind): New enum.
(struct dynamic_prop_list): New struct.
* dwarf2read.c (set_die_type): Set data_location data.
