* gdb.texinfo (File Options): Adjust the documentation of this
switch to refer to the "source" command rather than partially
duplicating some of the relevant information.
(Extending GDB): Introduce and document the set/show script-extension
setting.
(Command Files): Add note explaining that the "source" command
is also used to evalute scripts written in other languages.
Remove the short slightly incorrect reference to sourcing Python
scripts.
(Python Commands): Document how to execute a Python script from GDB.
* tracepoint.h (enum trace_stop_reason): New enum.
(struct trace_status): New struct.
(parse_trace_status): Declare.
(struct uploaded_tp): Move here from remote.c,
add fields for actions.
(struct uploaded_tsv): New struct.
* tracepoint.c (tfile_ops): New target vector.
(trace_fd): New global.
(tfile_open): New function.
(tfile_close): New function.
(tfile_files_info): New function.
(tfile_get_trace_status): New function.
(tfile_get_traceframe_address): New function.
(tfile_trace_find): New function.
(tfile_fetch_registers): New function.
(tfile_xfer_partial): New function.
(tfile_get_trace_state_variable_value): New function.
(init_tfile_ops): New function.
(_initialize_tracepoint): Call it, add tfile target.
(trace_status): New global.
(current_trace_status): New function.
(trace_running_p): Remove, change all users to get from
current_trace_status()->running.
(get_trace_status): Remove.
(trace_status_command): Call target_get_trace_status directly,
report more detail including tracing stop reasons.
(trace_find_command): Always allow tfind on a file.
(trace_find_pc_command): Ditto.
(trace_find_tracepoint_command): Ditto.
(trace_find_line_command): Ditto.
(trace_find_range_command): Ditto.
(trace_find_outside_command): Ditto.
(trace_frames_offset, cur_offset): Declare as off_t.
(trace_regblock_size): Rename from reg_size, update users.
(parse_trace_status): New function.
(tfile_interp_line): New function.
(disconnect_or_stop_tracing): Ensure current trace
status before asking what to do.
(stop_reason_names): New global.
(trace_save_command): New command.
(get_uploaded_tp): Move here from remote.c.
(find_matching_tracepoint): Ditto.
(merge_uploaded_tracepoints): New function.
(parse_trace_status): Use stop_reason_names.
(_initialize_tracepoint): Define tsave command.
* target.h (target_ops): New fields to_save_trace_data,
to_upload_tracepoints, to_upload_trace_state_variables,
to_get_raw_trace_data, change to_get_trace_status
to take a pointer to a status struct.
(target_save_trace_data): New macro.
(target_upload_tracepoints): New macro.
(target_upload_trace_state_variables): New macro.
(target_get_raw_trace_data): New macro.
* target.c (update_current_target): Add new methods, change
signature of to_get_trace_status.
* remote.c (hex2bin): Make globally visible.
(bin2hex): Ditto.
(remote_download_trace_state_variable): Download name also.
(remote_get_trace_status): Update parameter, use
parse_trace_status.
(remote_save_trace_data): New function.
(remote_upload_tracepoints): New function.
(remote_upload_trace_state_variables): New function.
(remote_get_raw_trace_data): New function.
(remote_start_remote): Use them.
(_initialize_remote_ops): Add operations.
* ax-gdb.c: Include breakpoint.h.
* breakpoint.c (create_tracepoint_from_upload): Use
break_command_really, return tracepoint, warn about unimplemented
parts.
* NEWS: Mention trace file addition.
* gdb.texinfo (Trace Files): New section.
(Tracepoint Packets): Document QTSave and qTBuffer.
(Trace File Format): New appendix.
* generic/gdbtk-bp.c (gdb_trace_status): Use current_trace_status.
* gdb.trace/tfile.c: New file.
* gdb.trace/tfile.exp: New file.
* infcmd.c (detach_command): Ask whether to stop tracing.
* cli/cli-cmds.c (quit_command): Ditto.
* breakpoint.h (struct breakpoint): New field number_on_target.
* breakpoint.c (create_tracepoint_from_upload): New function.
(get_tracepoint_by_number_on_target): New function.
* remote.c (struct remote): New field disconnected_tracing.
(remote_disconnected_tracing_feature): New function.
(remote_protocol_features): Add DisconnectedTracing.
(struct uploaded_tp): New struct.
(uploaded_tps): New global.
(get_uploaded_tp): New function.
(find_matching_tracepoint): New function.
(remote_get_tracing_state): New function.
(remote_start_remote): Call it.
* tracepoint.c (disconnected_tracing): New global.
(trace_start_command): Initialize number_on_target.
(stop_tracing): New function, split out from...
(trace_stop_command): Call stop_tracing.
(get_trace_status): New function, split out from...
(trace_status_command): Call get_trace_status, add info on
disconnection behavior.
(disconnect_or_stop_tracing): New function.
(finish_tfind_command): Translate from number on target.
(trace_find_tracepoint_command): Translate to number on target.
(send_disconnected_tracing_value): New function.
(set_disconnected_tracing): New function.
(_initialize_tracepoint): Add disconnected-tracing variable.
* NEWS: Mention disconnected tracing.
* gdb.texinfo (Starting and Stopping Trace Experiments): Document
disconnected tracing.
(Tracepoint Packets): Document new protocol.
* agentexpr.texi: Add 2010 to the list of copyright years.
* annotate.texinfo: Likewise.
* gdb.texinfo: Likewise.
* gdbint.texinfo: Likewise.
* observer.texi: Likewise.
* stabs.texinfo: Likewise.
Add trace state variables.
* ax.h (enum agent_op): Add getv, setv, and tracev.
(ax_tsv): Declare.
* ax-gdb.c: Include tracepoint.h.
(gen_expr): Handle BINOP_ASSIGN, BINOP_ASSIGN_MODIFY, and
OP_INTERNALVAR.
(gen_expr_binop_rest): New function, split from gen_expr.
* ax-general.c (ax_tsv): New function.
(aop_map): Add new bytecodes.
* tracepoint.h (struct trace_state_variable): New struct.
(tsv_s): New typedef.
(find_trace_state_variable): Declare.
* tracepoint.c (tvariables): New global.
(next_tsv_number): New global.
(create_trace_state_variable): New function.
(find_trace_state_variable): New function.
(delete_trace_state_variable): New function.
(trace_variable_command): New function.
(delete_trace_variable_command): New function.
(tvariables_info): New function.
(trace_start_command): Download tsvs with initial values.
(_initialize_tracepoint): Add new commands.
* NEWS: Mention the addition of trace state variables.
==> doc/ChangeLog <==
2009-12-28 Stan Shebs <stan@codesourcery.com>
* gdb.texinfo (Trace State Variables): New section.
(Tracepoint Packets): Describe trace state variable packets.
* agentexpr.texi (Bytecode Descriptions): Describe trace state
variable bytecodes.
==> testsuite/ChangeLog <==
2009-12-28 Stan Shebs <stan@codesourcery.com>
* gdb.trace/tsv.exp: New file.
* gdb.base/completion.exp: Update ambiguous info output.
PR python/10804
* python/py-type.c (typy_range): New Function.
2009-12-08 Phil Muldoon <pmuldoon@redhat.com>
* gdb.python/py-type.exp (test_range): New test.
2009-12-08 Phil Muldoon <pmuldoon@redhat.com>
* gdb.texinfo (Types In Python): Describe range function.
* breakpoint.c (find_condition_and_thread): Correct task error message.
* c-exp.y (yylex): Stop before "thread N", "task N", or abbreviations
of those.
doc/
* gdb.texinfo (Thread-Specific Breakpoints): Thread specifiers
are allowed after the breakpoint condition.
testsuite/
* gdb.base/condbreak.exp: Test combinations of "break *EXP",
"if", and "thread". Correct matching in the previous test.
* symfile.c (build_id_to_debug_filename): New variable debugdir. Move
variables size, s and data into a new inner block. Change xmalloc for
alloca, use direct BUILDID->SIZE there now. Loop for the
DEBUG_FILE_DIRECTORY components.
(find_separate_debug_file): New variable debugdir and debugdir_end.
Loop for the DEBUG_FILE_DIRECTORY components.
(_initialize_symfile): For "debug-file-directory" use plural and note
one can use multiple components now.
gdb/doc/
* gdb.texinfo (set debug-file-directory, show debug-file-directory)
(Auto-loading): Use plural and note one can use multiple components now.
gdb/testsuite/
* gdb.base/sepdebug.exp: New test_different_dir call for multiple-dirs.
* remote.c (interrupt_sequence_control_c)
(interrupt_sequence_break, interrupt_sequence_break_g)
(interrupt_sequence_modes): New constants.
(interrupt_sequence_mode, interrupt_on_connect): New variable.
(show_interrupt_sequence): New function.
(set_remotebreak, show_remotebreak): New function.
(send_interrupt_sequence): New function.
(remote_start_remote): Call send_interrupt_sequence if
interrupt_on_connect is true.
(remote_stop_as): Call send_interrupt_sequence.
(_initialize_remote): Add interrupt-sequence and interrupt-on-connect,
modify remotebreak to call set_remotebreak and show_remotebreak.
* NEWS: Add entry for "set/show remote interrupt-sequence" and
"set/show remote interrupt-on-connect". Also mention that
"set/show remotebreak" is now deprecated.
gdb/doc/:
* gdb.texinfo (Remote Configuration): Add "set/show remote
interrupt-sequence" and "set/show remote interrupt-on-connect" command.
Stan Shebs <stan@codesourcery.com>
Add base multi-executable/process support to GDB.
gdb/
* Makefile.in (SFILES): Add progspace.c.
(COMMON_OBS): Add progspace.o.
* progspace.h: New.
* progspace.c: New.
* breakpoint.h (struct bp_target_info) <placed_address_space>: New
field.
(struct bp_location) <pspace>: New field.
(struct breakpoint) <pspace>: New field.
(bpstat_stop_status, breakpoint_here_p)
(moribund_breakpoint_here_p, breakpoint_inserted_here_p)
(regular_breakpoint_inserted_here_p)
(software_breakpoint_inserted_here_p, breakpoint_thread_match)
(set_default_breakpoint): Adjust prototypes.
(remove_breakpoints_pid, breakpoint_program_space_exit): Declare.
(insert_single_step_breakpoint, deprecated_insert_raw_breakpoint):
Adjust prototypes.
* breakpoint.c (executing_startup): Delete.
(default_breakpoint_sspace): New.
(breakpoint_restore_shadows): Skip if the address space doesn't
match.
(update_watchpoint): Record the frame's program space in the
breakpoint location.
(insert_bp_location): Record the address space in target_info.
Adjust to pass the symbol space to solib_name_from_address.
(breakpoint_program_space_exit): New.
(insert_breakpoint_locations): Switch the symbol space and thread
when inserting breakpoints. Don't insert breakpoints in a vfork
parent waiting for vfork done if we're not attached to the vfork
child.
(remove_breakpoints_pid): New.
(reattach_breakpoints): Switch to a thread of PID. Ignore
breakpoints of other symbol spaces.
(create_internal_breakpoint): Store the symbol space in the sal.
(create_longjmp_master_breakpoint): Iterate over all symbol
spaces.
(update_breakpoints_after_exec): Ignore breakpoints for other
symbol spaces.
(remove_breakpoint): Rename to ...
(remove_breakpoint_1): ... this. Pass the breakpoints symbol
space to solib_name_from_address.
(remove_breakpoint): New.
(mark_breakpoints_out): Ignore breakpoints from other symbol
spaces.
(breakpoint_init_inferior): Ditto.
(breakpoint_here_p): Add an address space argument and adjust to
use breakpoint_address_match.
(moribund_breakpoint_here_p): Ditto.
(regular_breakpoint_inserted_here_p): Ditto.
(breakpoint_inserted_here_p): Ditto.
(software_breakpoint_inserted_here_p): Ditto.
(breakpoint_thread_match): Ditto.
(bpstat_check_location): Ditto.
(bpstat_stop_status): Ditto.
(print_breakpoint_location): If there's a location to print,
switch the current symbol space.
(print_one_breakpoint_location): Add `allflag' argument.
(print_one_breakpoint): Ditto. Adjust.
(do_captured_breakpoint_query): Adjust.
(breakpoint_1): Adjust.
(breakpoint_has_pc): Also match the symbol space.
(describe_other_breakpoints): Add a symbol space argument and
adjust.
(set_default_breakpoint): Add a symbol space argument. Set
default_breakpoint_sspace.
(breakpoint_address_match): New.
(check_duplicates_for): Add an address space argument, and adjust.
(set_raw_breakpoint): Record the symbol space in the location and
in the breakpoint.
(set_longjmp_breakpoint): Skip longjmp master breakpoints from
other symbol spaces.
(remove_thread_event_breakpoints, remove_solib_event_breakpoints)
(disable_breakpoints_in_shlibs): Skip breakpoints from other
symbol spaces.
(disable_breakpoints_in_unloaded_shlib): Match symbol spaces.
(create_catchpoint): Set the symbol space in the sal.
(disable_breakpoints_before_startup): Skip breakpoints from other
symbol spaces. Set executing_startup in the current symbol space.
(enable_breakpoints_after_startup): Clear executing_startup in the
current symbol space. Skip breakpoints from other symbol spaces.
(clone_momentary_breakpoint): Also copy the symbol space.
(add_location_to_breakpoint): Set the location's symbol space.
(bp_loc_is_permanent): Switch thread and symbol space.
(create_breakpoint): Adjust.
(expand_line_sal_maybe): Expand comment to mention symbol spaces.
Switch thread and symbol space when reading memory.
(parse_breakpoint_sals): Set the symbol space in the sal.
(break_command_really): Ditto.
(skip_prologue_sal): Switch and space.
(resolve_sal_pc): Ditto.
(watch_command_1): Record the symbol space in the sal.
(create_ada_exception_breakpoint): Adjust.
(clear_command): Adjust. Match symbol spaces.
(update_global_location_list): Use breakpoint_address_match.
(breakpoint_re_set_one): Switch thread and space.
(breakpoint_re_set): Save symbol space.
(breakpoint_re_set_thread): Also reset the symbol space.
(deprecated_insert_raw_breakpoint): Add an address space argument.
Adjust.
(insert_single_step_breakpoint): Ditto.
(single_step_breakpoint_inserted_here_p): Ditto.
(clear_syscall_counts): New.
(_initialize_breakpoint): Install it as inferior_exit observer.
* exec.h: Include "progspace.h".
(exec_bfd, exec_bfd_mtime): New defines.
(exec_close): Declare.
* exec.c: Include "gdbthread.h" and "progspace.h".
(exec_bfd, exec_bfd_mtime, current_target_sections_1): Delete.
(using_exec_ops): New.
(exec_close_1): Rename to exec_close, and make public.
(exec_close): Rename to exec_close_1, and adjust all callers. Add
description. Remove target sections and close executables from
all program spaces.
(exec_file_attach): Add comment.
(add_target_sections): Check on `using_exec_ops' to check if the
target should be pushed.
(remove_target_sections): Only unpush the target if there are no
more target sections in any symbol space.
* gdbcore.h: Include "exec.h".
(exec_bfd, exec_bfd_mtime): Remove declarations.
* frame.h (get_frame_program_space, get_frame_address_space)
(frame_unwind_program_space): Declare.
* frame.c (struct frame_info) <pspace, aspace>: New fields.
(create_sentinel_frame): Add program space argument. Set the
pspace and aspace fields of the frame object.
(get_current_frame, create_new_frame): Adjust.
(get_frame_program_space): New.
(frame_unwind_program_space): New.
(get_frame_address_space): New.
* stack.c (print_frame_info): Adjust.
(print_frame): Use the frame's program space.
* gdbthread.h (any_live_thread_of_process): Declare.
* thread.c (any_live_thread_of_process): New.
(switch_to_thread): Switch the program space as well.
(restore_selected_frame): Don't warn if trying to restore frame
level 0.
* inferior.h: Include "progspace.h".
(detach_fork): Declare.
(struct inferior) <removable, aspace, pspace>
<vfork_parent, vfork_child, pending_detach>
<waiting_for_vfork_done>: New fields.
<terminal_info>: Remove field.
<data, num_data>: New fields.
(register_inferior_data, register_inferior_data_with_cleanup)
(clear_inferior_data, set_inferior_data, inferior_data): Declare.
(exit_inferior, exit_inferior_silent, exit_inferior_num_silent)
(inferior_appeared): Declare.
(find_inferior_pid): Typo.
(find_inferior_id, find_inferior_for_program_space): Declare.
(set_current_inferior, save_current_inferior, prune_inferiors)
(number_of_inferiors): Declare.
(inferior_list): Declare.
* inferior.c: Include "gdbcore.h" and "symfile.h".
(inferior_list): Make public.
(delete_inferior_1): Always delete thread silently.
(find_inferior_id): Make public.
(current_inferior_): New.
(current_inferior): Use it.
(set_current_inferior): New.
(restore_inferior): New.
(save_current_inferior): New.
(free_inferior): Free the per-inferior data.
(add_inferior_silent): Allocate per-inferior data.
Call inferior_appeared.
(delete_threads_of_inferior): New.
(delete_inferior_1): Adjust interface to take an inferior pointer.
(delete_inferior): Adjust.
(delete_inferior_silent): Adjust.
(exit_inferior_1): New.
(exit_inferior): New.
(exit_inferior_silent): New.
(exit_inferior_num_silent): New.
(detach_inferior): Adjust.
(inferior_appeared): New.
(discard_all_inferiors): Adjust.
(find_inferior_id): Make public. Assert pid is not zero.
(find_inferior_for_program_space): New.
(have_inferiors): Check if we have any inferior with pid not zero.
(have_live_inferiors): Go over all pushed targets looking for
process_stratum.
(prune_inferiors): New.
(number_of_inferiors): New.
(print_inferior): Add executable column. Print vfork parent/child
relationships.
(inferior_command): Adjust to cope with not running inferiors.
(remove_inferior_command): New.
(add_inferior_command): New.
(clone_inferior_command): New.
(struct inferior_data): New.
(struct inferior_data_registration): New.
(struct inferior_data_registry): New.
(inferior_data_registry): New.
(register_inferior_data_with_cleanup): New.
(register_inferior_data): New.
(inferior_alloc_data): New.
(inferior_free_data): New.
(clear_inferior_data): New.
(set_inferior_data): New.
(inferior_data): New.
(initialize_inferiors): New.
(_initialize_inferiors): Register "add-inferior",
"remove-inferior" and "clone-inferior" commands.
* objfiles.h: Include "progspace.h".
(struct objfile) <pspace>: New field.
(symfile_objfile, object_files): Don't declare.
(ALL_PSPACE_OBJFILES): New.
(ALL_PSPACE_OBJFILES_SAFE): New.
(ALL_OBJFILES, ALL_OBJFILES_SAFE): Adjust.
(ALL_PSPACE_SYMTABS): New.
(ALL_PRIMARY_SYMTABS): Adjust.
(ALL_PSPACE_PRIMARY_SYMTABS): New.
(ALL_PSYMTABS): Adjust.
(ALL_PSPACE_PSYMTABS): New.
* objfiles.c (object_files, symfile_objfile): Delete.
(struct objfile_sspace_info): New.
(objfiles_pspace_data): New.
(objfiles_pspace_data_cleanup): New.
(get_objfile_pspace_data): New.
(objfiles_changed_p): Delete.
(allocate_objfile): Set the objfile's program space. Adjust to
reference objfiles_changed_p in pspace data.
(free_objfile): Adjust to reference objfiles_changed_p in pspace
data.
(objfile_relocate): Ditto.
(update_section_map): Add pspace argument. Adjust to iterate over
objfiles in the passed in pspace.
(find_pc_section): Delete sections and num_sections statics.
Adjust to refer to program space's objfiles_changed_p. Adjust to
refer to sections and num_sections store in the objfile's pspace
data.
(objfiles_changed): Adjust to reference objfiles_changed_p in
pspace data.
(_initialize_objfiles): New.
* linespec.c (decode_all_digits, decode_dollar): Set the sal's
program space.
* source.c (current_source_pspace): New.
(get_current_source_symtab_and_line): Set the sal's program space.
(set_current_source_symtab_and_line): Set current_source_pspace.
(select_source_symtab): Ditto. Use ALL_OBJFILES.
(forget_cached_source_info): Iterate over all program spaces.
* symfile.c (clear_symtab_users): Adjust.
* symmisc.c (print_symbol_bcache_statistics): Iterate over all
program spaces.
(print_objfile_statistics): Ditto.
(maintenance_print_msymbols): Ditto.
(maintenance_print_objfiles): Ditto.
(maintenance_info_symtabs): Ditto.
(maintenance_info_psymtabs): Ditto.
* symtab.h (SYMTAB_PSPACE): New.
(struct symtab_and_line) <pspace>: New field.
* symtab.c (init_sal): Clear the sal's program space.
(find_pc_sect_symtab): Set the sal's program space. Switch thread
and space.
(append_expanded_sal): Add program space argument. Iterate over
all program spaces.
(expand_line_sal): Iterate over all program spaces. Switch
program space.
* target.h (enum target_waitkind) <TARGET_WAITKIND_VFORK_DONE>: New.
(struct target_ops) <to_thread_address_space>: New field.
(target_thread_address_space): Define.
* target.c (target_detach): Only remove breakpoints from the
inferior we're detaching.
(target_thread_address_space): New.
* defs.h (initialize_progspace): Declare.
* top.c (gdb_init): Call it.
* solist.h (struct so_list) <sspace>: New field.
* solib.h (struct program_space): Forward declare.
(solib_name_from_address): Adjust prototype.
* solib.c (so_list_head): Replace with a macro referencing the
program space.
(update_solib_list): Set the so's program space.
(solib_name_from_address): Add a program space argument and adjust.
* solib-svr4.c (struct svr4_info) <pid>: Delete field.
<interp_text_sect_low, interp_text_sect_high, interp_plt_sect_low>
<interp_plt_sect_high>: New fields.
(svr4_info_p, svr4_info): Delete.
(solib_svr4_sspace_data): New.
(get_svr4_info): Rewrite.
(svr4_sspace_data_cleanup): New.
(open_symbol_file_object): Adjust.
(svr4_default_sos): Adjust.
(svr4_fetch_objfile_link_map): Adjust.
(interp_text_sect_low, interp_text_sect_high, interp_plt_sect_low)
(interp_plt_sect_high): Delete.
(svr4_in_dynsym_resolve_code): Adjust.
(enable_break): Adjust.
(svr4_clear_solib): Revert bit that removed the svr4_info here,
and reinstate clearing debug_base, debug_loader_offset_p,
debug_loader_offset and debug_loader_name.
(_initialize_svr4_solib): Register solib_svr4_pspace_data. Don't
install an inferior_exit observer anymore.
* printcmd.c (struct display) <pspace>: New field.
(display_command): Set the display's sspace.
(do_one_display): Match the display's sspace.
(display_uses_solib_p): Ditto.
* linux-fork.c (detach_fork): Moved to infrun.c.
(_initialize_linux_fork): Moved "detach-on-fork" command to
infrun.c.
* infrun.c (detach_fork): Moved from linux-fork.c.
(proceed_after_vfork_done): New.
(handle_vfork_child_exec_or_exit): New.
(follow_exec_mode_replace, follow_exec_mode_keep)
(follow_exec_mode_names, follow_exec_mode_string)
(show_follow_exec_mode_string): New.
(follow_exec): New. Reinstate the mark_breakpoints_out call.
Remove shared libraries before attaching new executable. If user
wants to keep the inferior, keep it.
(displaced_step_fixup): Adjust to pass an address space to the
breakpoints module.
(resume): Ditto.
(clear_proceed_status): In all-stop mode, always clear the proceed
status of all threads.
(prepare_to_proceed): Adjust to pass an address space to the
breakpoints module.
(proceed): Ditto.
(adjust_pc_after_break): Ditto.
(handle_inferior_event): When handling a process exit, switch the
program space to the inferior's that had exited. Call
handle_vfork_child_exec_or_exit. Adjust to pass an address space
to the breakpoints module. In non-stop mode, when following a
fork and detach-fork is off, also resume the other branch. Handle
TARGET_WAITKIND_VFORK_DONE. Set the program space in sals.
(normal_stop): Prune inferiors.
(_initialize_infrun): Install the new "follow-exec-mode" command.
"detach-on-fork" moved here.
* regcache.h (get_regcache_aspace): Declare.
* regcache.c (struct regcache) <aspace>: New field.
(regcache_xmalloc): Clear the aspace.
(get_regcache_aspace): New.
(regcache_cpy): Copy the aspace field.
(regcache_cpy_no_passthrough): Ditto.
(get_thread_regcache): Fetch the thread's address space from the
target, and store it in the regcache.
* infcall.c (call_function_by_hand): Set the sal's pspace.
* arch-utils.c (default_has_shared_address_space): New.
* arch-utils.h (default_has_shared_address_space): Declare.
* gdbarch.sh (has_shared_address_space): New.
* gdbarch.h, gdbarch.c: Regenerate.
* linux-tdep.c: Include auxv.h, target.h, elf/common.h.
(linux_has_shared_address_space): New.
(_initialize_linux_tdep): Declare.
* arm-tdep.c (arm_software_single_step): Pass the frame's address
space to insert_single_step_breakpoint.
* arm-linux-tdep.c (arm_linux_software_single_step): Pass the
frame's pspace to breakpoint functions.
* cris-tdep.c (crisv32_single_step_through_delay): Ditto.
(cris_software_single_step): Ditto.
* mips-tdep.c (deal_with_atomic_sequence): Add frame argument.
Pass the frame's pspace to breakpoint functions.
(mips_software_single_step): Adjust.
(mips_single_step_through_delay): Adjust.
* rs6000-aix-tdep.c (rs6000_software_single_step): Adjust.
* rs6000-tdep.c (ppc_deal_with_atomic_sequence): Adjust.
* solib-irix.c (enable_break): Adjust to pass the current frame's
address space to breakpoint functions.
* sparc-tdep.c (sparc_software_single_step): Ditto.
* spu-tdep.c (spu_software_single_step): Ditto.
* alpha-tdep.c (alpha_software_single_step): Ditto.
* record.c (record_wait): Adjust to pass an address space to the
breakpoints module.
* fork-child.c (fork_inferior): Set the new inferior's program and
address spaces.
* inf-ptrace.c (inf_ptrace_follow_fork): Copy the parent's program
and address spaces.
(inf_ptrace_attach): Set the inferior's program and address spaces.
* linux-nat.c: Include "solib.h".
(linux_child_follow_fork): Manage parent and child's program and
address spaces. Clone the parent's program space if necessary.
Don't wait for the vfork to be done here. Refuse to resume if
following the vfork parent while leaving the child stopped.
(resume_callback): Don't resume a vfork parent.
(linux_nat_resume): Also check for pending events in the
lp->waitstatus field.
(linux_handle_extended_wait): Report TARGET_WAITKIND_VFORK_DONE
events to the core.
(stop_wait_callback): Don't wait for SIGSTOP on vfork parents.
(cancel_breakpoint): Adjust.
* linux-thread-db.c (thread_db_wait): Don't remove thread event
breakpoints here.
(thread_db_mourn_inferior): Don't mark breakpoints out here.
Remove thread event breakpoints after mourning.
* corelow.c: Include progspace.h.
(core_open): Set the inferior's program and address spaces.
* remote.c (remote_add_inferior): Set the new inferior's program
and address spaces.
(remote_start_remote): Update address spaces.
(extended_remote_create_inferior_1): Don't init the thread list if
we already debugging other inferiors.
* darwin-nat.c (darwin_attach): Set the new inferior's program and
address spaces.
* gnu-nat.c (gnu_attach): Ditto.
* go32-nat.c (go32_create_inferior): Ditto.
* inf-ttrace.c (inf_ttrace_follow_fork, inf_ttrace_attach): Ditto.
* monitor.c (monitor_open): Ditto.
* nto-procfs.c (procfs_attach, procfs_create_inferior): Ditto.
* procfs.c (do_attach): Ditto.
* windows-nat.c (do_initial_windows_stuff): Ditto.
* inflow.c (inferior_process_group)
(terminal_init_inferior_with_pgrp, terminal_inferior,
(terminal_ours_1, inflow_inferior_exit, copy_terminal_info)
(child_terminal_info, new_tty_postfork, set_sigint_trap): Adjust
to use per-inferior data instead of inferior->terminal_info.
(inflow_inferior_data): New.
(inflow_new_inferior): Delete.
(inflow_inferior_data_cleanup): New.
(get_inflow_inferior_data): New.
* mi/mi-interp.c (mi_new_inferior): Rename to...
(mi_inferior_appeared): ... this.
(mi_interpreter_init): Adjust.
* tui/tui-disasm.c: Include "progspace.h".
(tui_set_disassem_content): Pass an address space to
breakpoint_here_p.
* NEWS: Mention multi-program debugging support. Mention new
commands "add-inferior", "clone-inferior", "remove-inferior",
"maint info program-spaces", and new option "set
follow-exec-mode".
2009-10-19 Pedro Alves <pedro@codesourcery.com>
Stan Shebs <stan@codesourcery.com>
gdb/doc/
* observer.texi (new_inferior): Rename to...
(inferior_appeared): ... this.
2009-10-19 Pedro Alves <pedro@codesourcery.com>
Stan Shebs <stan@codesourcery.com>
gdb/testsuite/
* gdb.base/foll-vfork.exp: Adjust to spell out "follow-fork".
* gdb.base/foll-exec.exp: Adjust to expect a process id before
"Executing new program".
* gdb.base/foll-fork.exp: Adjust to spell out "follow-fork".
* gdb.base/multi-forks.exp: Ditto. Adjust to the inferior being
left listed after having been killed.
* gdb.base/attach.exp: Adjust to spell out "symbol-file".
* gdb.base/maint.exp: Adjust test.
* Makefile.in (ALL_SUBDIRS): Add gdb.multi.
* gdb.multi/Makefile.in: New.
* gdb.multi/base.exp: New.
* gdb.multi/goodbye.c: New.
* gdb.multi/hangout.c: New.
* gdb.multi/hello.c: New.
* gdb.multi/bkpt-multi-exec.c: New.
* gdb.multi/bkpt-multi-exec.exp: New.
* gdb.multi/crashme.c: New.
2009-10-19 Pedro Alves <pedro@codesourcery.com>
Stan Shebs <stan@codesourcery.com>
gdb/doc/
* gdb.texinfo (Inferiors): Rename node to ...
(Inferiors and Programs): ... this. Mention running multiple
programs in the same debug session.
<info inferiors>: Mention the new 'Executable' column if "info
inferiors". Update examples. Document the "add-inferior",
"clone-inferior", "remove-inferior" and "maint info
program-spaces" commands.
(Process): Rename node to...
(Forks): ... this. Document "set|show follow-exec-mode".
* amd64-linux-tdep.c: Include xml-syscall.h header, define the XML
syscall name for the architecture.
(amd64_linux_get_syscall_number): New function.
(amd64_linux_init_abi): Register the correct functions for syscall
catchpoint; set the correct syscall file name.
* breakpoint.c: New include: xml-syscall.h.
(set_raw_breakpoint_without_location): Setting the parameters
for the catch syscall feature.
(insert_catch_syscall): New.
(remove_catch_syscall): New.
(breakpoint_hit_catch_syscall): New.
(print_it_catch_syscall): New.
(print_one_catch_syscall): New.
(print_mention_catch_syscall): New.
(catch_syscall_breakpoint_ops): New.
(syscall_catchpoint_p): New.
(create_catchpoint_without_mention): New.
(create_catchpoint): Modified in order to use
create_catchpoint_without_mention.
(create_syscall_event_catchpoint): New.
(clean_up_filters): New.
(catch_syscall_split_args): New.
(catch_syscall_command_1): New.
(delete_breakpoint): Add cleanup for catch syscall.
(is_syscall_catchpoint_enabled): New.
(catch_syscall_enabled): New.
(catching_syscall_number): New.
(catch_syscall_completer): New completer function.
(add_catch_command): Add the completer function for catchpoints.
* breakpoint.h (syscalls_to_be_caught): New vector.
(catch_syscall_enabled): New.
(catching_syscall_number): New.
* gdbarch.c: Regenerated.
* gdbarch.h: Regenerated.
* gdbarch.sh: Add syscall catchpoint functions and structures.
(get_syscall_number): New.
(UNKNOWN_SYSCALL): New definition.
* i386-linux-nat.c (i386_linux_resume): Select the proper request
to be made for ptrace() considering if we are catching syscalls
or not.
* i386-linux-tdep.c: Include xml-syscall.h header, define the XML
syscall name for the architecture.
(i386_linux_get_syscall_number): New.
(i386_linux_init_abi): Register the correct functions for syscall
catchpoint; set the correct syscall file name.
* inf-child.c (inf_child_set_syscall_catchpoint): New.
(inf_child_target): Assign default values to target_ops.
* inf-ptrace.c (inf_ptrace_resume): Select the proper request
to be made for ptrace() considering if we are catching syscalls
or not.
* inferior.h (struct inferior): Included new variables
any_syscall_count, syscalls_counts and total_syscalls_count,
used to keep track of requested syscall catchpoints.
* infrun.c (resume): Add syscall catchpoint.
(deal_with_syscall_event): New.
(handle_inferior_event): Add syscall entry/return events.
(inferior_has_called_syscall): New.
* linux-nat.c: Define some helpful variables to track wether we have
support for the needed ptrace option.
(linux_test_for_tracesysgood): New.
(linux_supports_tracesysgood): New.
(linux_enable_tracesysgood): New.
(linux_enable_event_reporting): Save the current used ptrace
options.
(linux_child_post_attach): Calling linux_enable_tracesysgood.
(linux_child_post_startup_inferior): Likewise.
(linux_child_set_syscall_catchpoint): New function.
(linux_handle_extended_wait): Handle the case which the inferior stops
because it has called or returned from a syscall.
(linux_target_install_ops): Install the necessary functions to handle
syscall catchpoints.
* linux-nat.h (struct lwp_info): Include syscall_state into the
structure, which indicates if we are in a syscall entry or return.
* ppc-linux-tdep.c: Include xml-syscall.h header, define the XML
syscall filename for the arch.
(ppc_linux_get_syscall_number): New.
(ppc_linux_init_abi): Register the correct functions for syscall
catchpoint; setting the correct name for the XML syscall file.
* target.c (update_current_target): Update/copy functions related to
syscall catchpoint.
(target_waitstatus_to_string): Add syscall catchpoint entry/return
events.
* target.h (struct target_waitstatus): Add syscall number.
(struct syscall): New struct to hold information about syscalls
in the system.
(struct target_ops): Add ops for syscall catchpoint.
(inferior_has_called_syscall): New.
(target_set_syscall_catchpoint): New.
* xml-support.c (xml_fetch_content_from_file): New function,
transferred from xml-tdesc.c.
* xml-support.h (xml_fetch_content_from_file): New.
* xml-tdesc.c (fetch_xml_from_file): Function removed;
transferred to xml-support.c.
(file_read_description_xml): Updated to use the new
xml_fetch_content_from_file function.
* syscalls/gdb-syscalls.dtd: New definition file for syscall's XML
support.
* syscalls/amd64-linux.xml: New file containing information about
syscalls for GNU/Linux systems that use amd64 architecture.
* syscalls/i386-linux.xml: New file containing information about
syscalls for GNU/Linux systems that use i386 architecture.
* syscalls/ppc-linux.xml: New file containing information about
syscalls for GNU/Linux systems that use PPC architecture.
* syscalls/ppc64-linux.xml: New file containing information about
syscalls for GNU/Linux systems that use PPC64 architecture.
* xml-syscall.c: New file containing functions for manipulating
syscall's XML files.
* xml-syscall.h: New file, exporting the functions above mentioned.
* Makefile.in: Support for relocatable GDB datadir and XML
syscall.
* NEWS: Added information about the catch syscall feature.
* doc/gdb.texinfo (Set Catchpoints): Documentation about the new
feature.
* testsuite/Makefile.in: Inclusion of catch-syscall object.
* testsuite/gdb.base/catch-syscall.c: New file.
* testsuite/gdb.base/catch-syscall.exp: New file.
* frame.c (get_frame_id): Default to outer_frame_id if the this_id
method does not supply an ID. Assert that the result is not
null_frame_id.
(outer_frame_id): New.
(frame_id_p): Accept outer_frame_id.
(frame_id_eq): Allow outer_frame_id to be equal to itself.
(frame_find_by_id): Revert previous local workarounds.
(get_prev_frame_1): Adjust end-of-stack check to test outer_frame_id.
* frame.h (null_frame_id, frame_id_p): Update comments.
(outer_frame_id): Declare.
* infrun.c (handle_inferior_event): Do not treat all steps from the
outermost frame as subroutine calls.
* libunwind-frame.c (libunwind_frame_this_id): Do not clear THIS_ID.
* hppa-tdep.c (hppa_stub_frame_this_id): Likewise.
* ia64-tdep.c (ia64_frame_this_id): Likewise.
(ia64_libunwind_frame_this_id, ia64_libunwind_sigtramp_frame_this_id):
Use outer_frame_id instead of null_frame_id.
* amd64obsd-tdep.c (amd64obsd_trapframe_cache): Use outer_frame_id.
* i386obsd-tdep.c (i386obsd_trapframe_cache): Likewise.
* inline-frame.c (inline_frame_this_id): Refuse outer_frame_id.
* thread.c (restore_selected_frame): Update comment and remove
frame_id_p check.
gdb/doc/
* gdbint.texinfo (Unwinding the Frame ID): Reference outer_frame_id.
* NEWS: Add note on new "set stack-cache" option.
* corefile.c (read_stack): New function.
* dcache.c (dcache_struct): New member ptid.
(dcache_enable_p): Mark as obsolete.
(show_dcache_enabled_p): Flag option as deprecated.
(dcache_invalidate): Update ptid.
(dcache_invalidate_line): New function.
(dcache_read_line): No longer check cacheable attribute, stack
accesses get cached despite attribute.
(dcache_init): Set ptid.
(dcache_xfer_memory): Flush cache if from different ptid than before.
Update cache after write.
(dcache_update): New function.
(dcache_info): Report ptid.
(_initialize_dcache): Update text for `remotecache' to indicate it
is obsolete.
* dcache.h (dcache_update): Declare.
* dwarf2loc.c (dwarf2_evaluate_loc_desc): Mark values on stack with
set_value_stack.
* frame-unwind.c (frame_unwind_got_memory): Ditto.
* gdbcore.h (read_stack): Declare.
* memattr.c (mem_enable_command): Call target_dcache_invalidate
instead of dcache_invalidate.
(mem_disable_command, mem_delete_command): Ditto.
* target.c (stack_cache_enabled_p_1): New static global.
(stack_cache_enabled_p): New static global.
(set_stack_cache_enabled_p): New function.
(show_stack_cache_enabled_p): New function.
(target_dcache): Make static.
(target_dcache_invalidate): New function.
(target_load, target_resume): Call target_dcache_invalidate
instead of dcache_invalidate.
(memory_xfer_partial): New arg object, all callers updated.
Check for existing inferior before calling dcache routines.
When writing non-TARGET_OBJECT_STACK_MEMORY, notify dcache.
(target_xfer_partial): Call memory_xfer_partial for
TARGET_OBJECT_STACK_MEMORY.
(target_read_stack): New function.
(initialize_targets): Install new option `stack-cache'.
* target.h: Remove #include of dcache.h.
(enum target_object): New value TARGET_OBJECT_STACK_MEMORY.
(target_dcache): Delete.
(target_dcache_invalidate): Declare.
(target_read_stack): Declare.
* top.c (prepare_execute_command): New function.
(execute_command): Call prepare_execute_command
instead of free_all_values.
* top.h (prepare_execute_command): Declare.
* valops.c (get_value_at): New function.
(value_at): Guts moved to get_value_at.
(value_at_lazy): Similarly.
(value_fetch_lazy): Call read_stack for stack values.
* value.c (struct value): New member `stack'.
(value_stack, set_value_stack): New functions.
* value.h (value_stack, set_value_stack): Declare.
* mi/mi-main.c (mi_cmd_execute): Call prepare_execute_command
instead of free_all_values.
doc/
* gdb.texinfo (Caching Data of Remote Targets): Update text.
Mark `set/show remotecache' options as obsolete.
Document new `set/show stack-cache' option.
Update text for `info dcache'.
Remove note on "set print symbol-loading".
* main.c (captured_main): Pass !batch for from_tty when calling
symbol_file_add_main.
* objfiles.h (objfile_has_partial_symbols): Declare.
(objfile_has_full_symbols): Declare.
* objfiles.c (objfile_has_partial_symbols): New function.
(have_partial_symbols): Use it.
(objfile_has_full_symbols): New function.
(have_full_symbols): Use it.
* solib.c: Include interps.h.
(solib_read_symbols): Back out patch of 2008-07-10.
Add test for info_verbose for symbol loading messages for
consistency with symfile.c.
(info_sharedlibrary_command): Handle optional parameter of regex of
libraries to list. Inform user of libraries without debugging info.
Rewrite to use ui_out routines to format output.
* symfile.c (print_symbol_loading): Delete.
(symbol_file_add_with_addrs_or_offsets): Back out patch of 2008-07-10.
Print "no debugging symbols found" only if from_tty || info_verbose;
and only check file being loaded, not all files.
(reread_symbols): Test file being loaded for whether it has symbols,
not all files.
(__initialize_symfile): Delete `set print symbol-loading'.
* symfile.h (print_symbol_loading): Delete.
* doc/gdb.texinfo (Symbols): Delete `set print symbol-loading'.
(Files): Add note on new optional regex arg to `info sharedlibrary'.
* inferior.c (print_inferior): Align columns left. Remove header
for the the "current" column. Rename column "Id" to "Num".
Rename column "PID" to "Description". Print if there's no selected
inferior.
gdb/doc/
* gdb.texinfo (Debugging Multiple Inferiors): Add "info inferiors"
small example, and describe its columns. Replace "inferior-id" by
"infno" throughout.
* NEWS: Announce JIT interface.
* Makefile.in (SFILES): Add jit.c.
(HFILES_NO_SRCDIR): Add jit.h.
(COMMON_OBS): Add jit.o.
* jit.c: New file.
* jit.h: New file.
* breakpoint.h (enum bptype): Add bp_jit_event to enum.
* breakpoint.c:
(update_breakpoints_after_exec): Delete jit breakpoints after exec.
(bpstat_what): Update event table for bp_jit_event.
(print_it_typical): Added case for bp_jit_event.
(print_one_breakpoint_location): Added case for bp_jit_event.
(allocate_bp_location): Added case for bp_jit_event.
(mention): Added case for bp_jit_event.
(delete_command): Added case for bp_jit_event.
(breakpoint_re_set_one): Added case for bp_jit_event.
(breakpoint_re_set): Added call to jit_inferior_created_hook.
(create_jit_event_breakpoint): New.
* infrun.c (handle_inferior_event): Add handler for jit event.
(follow_exec): Add call to jit_inferior_created_hook.
* doc/gdb.texinfo: Add chapter on JIT interface.
* features/gdb-target.dtd (target): Accept an optional 'osabi'
element.
(osabi): Define element.
* features/mips-linux.xml (target): Add an osabi subelement set to
GNU/Linux.
* regformats/regdat.sh (xmlarch, xmlosabi): New variables. Don't
write the architecture into $xmltarget. Store it in $xmlarch.
Handle the 'osabi' type. Handle outputting the osabi element of
the target description.
* regformats/reg-x86-64-linux.dat (osabi): Set to GNU/Linux.
* regformats/reg-i386-linux.dat (osabi): Set to GNU/Linux.
* target-descriptions.h (tdesc_osabi, set_tdesc_osabi): Declare.
* target-descriptions.c (struct target_desc) <osabi>: New field.
(tdesc_osabi): New function.
(set_tdesc_osabi): New function.
* xml-tdesc.c: Include osabi.h.
(tdesc_end_osabi): New.
(target_children): Parse "osabi" elements.
* arch-utils.c (gdbarch_info_fill): Try to get the osabi from the
target description if the user didn't override it or it is not
extractable from the bfd. If that still fails, fallback to the
configured in default.
* osabi.h (osabi_from_tdesc_string): Declare.
* osabi.c (osabi_from_tdesc_string): New.
(gdbarch_lookup_osabi): Return GDB_OSABI_UNKNOWN instead of
GDB_OSABI_DEFAULT.
* NEWS: Mention that target descriptions can now describe the
target OS ABI.
2009-07-20 Pedro Alves <pedro@codesourcery.com>
* gdb.texinfo (Target Description Format): Mention the new <osabi>
optional element.
(subsection OS ABI): New subsection.
2009-07-02 Pedro Alves <pedro@codesourcery.com>
* linux-nat.c (linux_child_follow_fork): If we're staying attached
to the child process, enable event reporting on it. Don't handle
checkpoints here. Instead, add the child fork to the lwp thread
and inferior lists without clobbering the previous inferior. Let
the thread_db layer learn about a new child process, even if
following the parent.
(linux_nat_switch_fork): Delete lwps of the current inferior only,
instead of clearing the whole list. Use thread_change_ptid to
give the core the illusion the new checkpoint is still the same
inferior. Clear the register cache.
(linux_handle_extended_wait): Handle checkpoints here.
(linux_multi_process): Turn on.
* linux-fork.c (struct fork_info) <pc>: Remove field.
(init_fork_list): Do not delete the checkpoint from the inferior
list (it is not there).
(fork_load_infrun_state): Don't switch inferior_ptid here. Pass
the new checkpoint's ptid to linux_nat_switch_fork.
(fork_save_infrun_state): Make static. Don't stop the pc field of
fork_info, it's gone.
(linux_fork_mourn_inferior): Don't delete the checkpoint from the
inferior list, it's not there.
(linux_fork_detach): Ditto.
(delete_fork_command): Replace mention of fork/checkpoint by
checkpoint only.
(detach_fork_command): Likewise. Don't delete the checkpoint from
the inferior list.
(info_forks_command): Adjust.
(restore_detach_fork): Delete.
(checkpointing_pid): New.
(linux_fork_checkpointing_p): New.
(save_detach_fork): Delete.
(checkpoint_command): Delete temp_detach_fork. Don't remove
breakpoints, that's a nop. Store the pid of the process we're
checkpointing, and use make_cleanup_restore_integer to restore it.
Don't reinsert breakpoints here.
(process_command, fork_command): Delete.
(restart_command): Update comments to only mention checkpoints,
not forks.
(_initialize_linux_fork): Delete "fork", "process", "info forks"
commands.
* linux-fork.h (fork_save_infrun_state, fork_list): Delete
declarations.
(linux_fork_checkpointing_p): Declare.
* cli/cli-cmds.c (killlist): New.
* cli/cli-cmds.h (killlist): Declare.
* gdbcmd.h (killlist): Declare.
* inferior.c: Include "gdbthread.h".
(detach_inferior_command, kill_inferior_command)
(inferior_command): New.
(info_inferiors_command): Allow specifying a specific inferior id.
(_initialize_inferiors): Register "inferior", "kill inferior" and
"detach inferior" commands.
* infcmd.c (_initialize_infcmd): Make "kill" a prefix command.
* gdbthread.h (any_thread_of_process): Declare.
* thread.c (any_thread_of_process): New.
* NEWS: Mention multi-inferior debugging. Mention 'info
inferiors', 'inferior', 'detach inferior' and 'kill inferior' as
new commands.
(Removed commands): New section, mentioning that 'info forks',
'fork', 'process', 'delete fork' and 'detach fork' are now gone.
gdb/testsuite/
2009-07-02 Pedro Alves <pedro@codesourcery.com>
* gdb.base/multi-forks.exp: Only run detach-on-fork tests on
linux. Adjust to use "inferior", "info inferiors", "detach
inferior" and "kill inferior" instead of "restart", "info fork",
"detach fork" and "delete fork".
* gdb.base/ending-run.exp: Spell out "info".
* gdb.base/help.exp: Adjust to use test_prefix_command_help for
the "kill" command.
gdb/doc/
2009-07-02 Pedro Alves <pedro@codesourcery.com>
* gdb.texinfo (Debugging multiple inferiors): Document the
"inferior", "detach inferior" and "kill inferior" commands.
(Debugging Programs with Multiple Processes): Adjust to mention
generic "inferior" commands. Delete mention of "detach fork" and
"delete fork". Cross reference to "Debugging multiple inferiors"
section.
* NEWS: Document inlined function support.
* Makefile.in (SFILES): Add inline-frame.c.
(COMMON_OBS): Add inline-frame.o.
* block.c (contained_in): Rewrite to use lexical nesting.
(block_linkage_function): Skip inlined function blocks.
(block_inlined_p): New.
* block.h (struct block): Update comment.
(block_inlined_p): New prototype.
* blockframe.c (get_frame_block): Handle inlined functions.
(get_frame_function): Do not use block_linkage_function.
(block_innermost_frame): Use get_frame_block and contained_in.
* breakpoint.c (watchpoint_check): Remove extra reinit_frame_cache.
Skip over inlined functions. Simplify epilogue check.
(bpstat_check_breakpoint_conditions): Use get_stack_frame_id.
Update comments.
(set_momentary_breakpoint): Only accept non-inlined frames.
(watch_command_1): Use frame_unwind_caller_pc and
frame_unwind_caller_id instead of get_prev_frame.
(until_break_command): Likewise. Use get_stack_frame_id.
* buildsym.c (end_symtab): Set SYMBOL_SYMTAB for block functions.
* dwarf2loc.c (dwarf_expr_frame_base): Use block_linkage_function.
* dwarf2read.c (process_die): Handle DW_TAG_inlined_subroutine.
(read_func_scope, new_symbol): Likewise. Handle arguments specially
for inlined functions without call site information.
(inherit_abstract_dies): Allow tag mismatch for inlined subroutines.
(die_specification): Treat DW_AT_abstract_origin as a specification.
(read_type_die): Handle DW_TAG_inlined_subroutine.
* frame-unwind.c (frame_unwind_init): Add inline_frame_unwind.
* frame.c (fprint_frame_id): Print inline depth.
(fprint_frame_type): Handle INLINE_FRAME and SENTINEL_FRAME.
(skip_inlined_frames, get_stack_frame_id): New.
(frame_unwind_caller_id): Use skip_inlined_frames.
(frame_id_inlined_p): New.
(frame_id_eq): Make the logic match the comments. Add inline_depth
check.
(frame_id_inner): Handle inlined functions.
(frame_unwind_pc): New function, copied from frame_unwind_caller_pc.
(frame_unwind_caller_pc): Use skip_inlined_frames and frame_unwind_pc.
(get_prev_frame_1): Check for inline frames. Split out frame
allocation to get_prev_frame_raw.
(get_prev_frame_raw): New function.
(get_prev_frame): Handle inline frames.
(get_frame_pc): Use frame_unwind_pc.
(get_frame_address_in_block): Skip inlined frames on both sides.
(pc_notcurrent): Delete.
(find_frame_sal): Rewrite to handle inline call sites. Use
get_frame_address_in_block.
(deprecated_update_frame_pc_hack): Make static.
* frame.h: Update comments.
(struct frame_id): Add inline_depth.
(enum frame_type): Add INLINE_FRAME.
(frame_id_inlined_p, get_stack_frame_id): New prototypes.
* gdbthread.h (struct thread_info): Add step_stack_frame_id field.
* infcmd.c (set_step_frame): New function.
(step_once): Use set_step_frame. Handle inlined functions.
(until_next_command): Use set_step_frame.
(finish_backward), finish_forward): Use get_stack_frame_id.
(finish_command): Support inlined functions.
* inferior.h (set_step_info): New prototype.
* infrun.c (RESUME_ALL): Use minus_one_ptid.
(clear_proceed_status): Clear step_stack_frame_id.
(init_wait_for_inferior): Call clear_inline_frame_state.
(init_execution_control_state): Make static.
(set_step_info): New function.
(init_thread_stepping_state): Do not set the symtab or line here.
(stepped_in_from): New function.
(handle_inferior_event): Handle inlined functions. Use set_step_info.
(insert_step_resume_breakpoint_at_frame): Use get_stack_frame_id.
(struct inferior_status): Add step_stack_frame_id.
(save_inferior_status, restore_inferior_status): Save and restore
step_stack_frame_id.
* inline-frame.c, inline-frame.h: New files.
* minsyms.c (prim_record_minimal_symbol_and_info): Use XCALLOC.
* regcache.c (regcache_write_pc): Call reinit_frame_cache.
* s390-tdep.c (s390_prologue_frame_unwind_cache): Handle INLINE_FRAME.
* stack.c (frame_show_address): New.
(print_frame_info, print_frame): Use it.
(find_frame_funname): Use get_frame_function. Handle inlined blocks.
(frame_info): Mark inlined functions.
(backtrace_command_1): Use get_current_user_frame.
(print_frame_local_vars, print_frame_label_vars): Update comments.
(return_command): Refuse inlined functions.
* symtab.c (lookup_symbol_aux_local): Stop at inlined function
boundaries.
(find_function_start_sal): Avoid inlined functions.
(completion_list_add_fields): New function.
(default_make_symbol_completion_list): Use it. Use block_static_block
and block_global_block. Check for inlined functions.
(skip_prologue_using_sal): Avoid line number comparison across
inlining.
* symtab.h (struct symbol): Add is_inlined.
(SYMBOL_INLINED): New.
* target.c (target_resume): Call clear_inline_frame_state.
* valops.c (value_of_variable): Check block_inlined_p.
gdb/doc/
* gdb.texinfo (Debugging Optimized Code): New chapter.
(Compiling for Debugging): Reference it. Move some
text to the new section.
gdb/testsuite/
* gdb.base/break.exp: Add an XFAIL for gcc/36748.
* gdb.cp/annota2.exp: Accept frames-invalid in more places.
* gdb.opt/Makefile.in (EXECUTABLES): Update.
* gdb.opt/clobbered-registers-O2.exp: Update to GPL v3.
* gdb.opt/inline-bt.c, gdb.opt/inline-bt.exp,
gdb.opt/inline-cmds.c, gdb.opt/inline-cmds.exp,
gdb.opt/inline-locals.c, gdb.opt/inline-locals.exp,
gdb.opt/inline-markers.c: New files.
* lib/gdb.exp (skip_inline_frame_tests): New function.
(skip_inline_var_tests): New function.
* infcall.c (show_unwind_on_terminating_exception_p): New
function.
(call_function_by_hand): Create breakpoint and clean-up call for
std::terminate.breakpoint. Add unwind_on_terminating_exception_p
gate. Pop frame on breakpoint hit.
(_initialize_infcall): Add add_setshow_boolean_cmd for
unwind-on-terminating-exception.
testsuite/
2009-06-15 Phil Muldoon <pmuldoon@redhat.com>
* gdb.cp/gdb2495.cc: New file.
* gdb.cp/gdb2495.exp: New file.
doc/
2009-06-15 Phil Muldoon <pmuldoon@redhat.com>
* doc/gdb.texinfo (Calling): Document
set-unwind-on-terminating-exception usage.
* infrun.c (sched_multi): New global.
(resume): If sched_multi is set, resume only threads of the
current inferior.
(prepare_to_proceed): Don't switch over to wait_ptid if we're
resuming a different inferior, and sched_multi is off.
(show_schedule_multiple): New.
(_initialize_infrun): Register new "set schedule-multiple" command.
* inferior.h (sched_multi): Declare.
* NEWS: Mention new "schedule-multiple" setting.
gdb/doc/
* gdb.texinfo (All-Stop): Document new 'set schedule-multiple'
command.
* NEWS: Mention set/show libthread-db-search-path.
* gdb_thread_db.h (LIBTHREAD_DB_SEARCH_PATH): New define.
(LIBTHREAD_DB_SO): Moved from linux-thread-db.c
* linux-thread-db.c (libthread_db_search_path): New setting.
(thread_db_handle): New variable (replaces using_thread_db).
(try_thread_db_load_1): New function.
(try_thread_db_load, thread_db_load_search): Likewise.
(dladdr_to_soname): Likewise.
(thread_db_load): Iterate over possibly multiple libthread_db's.
(check_for_thread_db): Attempt to load new libthread_db.
(thread_db_detach, thread_db_wait): Unload libthread_db.
(thread_db_mourn_inferior): Likewise.
(_initialize_thread_db): Add new libthread-db-search-path option.
Defer loading of libthread_db to check_for_thread_db.
* solib.c (libpthread_name_p): New function.
(libpthread_solib_p): Call it.
* solib.h (libpthread_name_p): New prototype.
2009-05-12 Pedro Alves <pedro@codesourcery.com>
* cli/cli-decode.c (deprecated_add_set_cmd): Delete.
* command.h (deprecated_add_set_cmd): Delete declaration.
* gnu-nat.c (_initialize_gnu_nat): Replace 'maint gnu-debug' with
'set debug gnu-nat' and 'show debug gnu-nat'.
* i386-nat.c (_initialize_i386_nat): Replace 'maint
show-debug-registers' with 'maint set show-debug-registers' and
'maint show show-debug-registers'.
* mips-linux-nat.c (_initialize_mips_linux_nat): Replace 'maint
show-debug-registers' with 'maint set show-debug-registers' and
'maint show show-debug-registers'.
gdb/doc/
2009-05-12 Pedro Alves <pedro@codesourcery.com>
* gdb.texinfo: Document 'set/show debug gnu-nat'. Replace 'maint
show-debug-regs' docs by 'maint set show-debug-regs' and 'maint
show show-debug-regs' docs.
* macrocmd.c (info_macro_command): Print -Dname=value if LINE is zero.
gdb/doc/
* gdb.texinfo (Macros): Note command-line for `info macro'. Append
a new part on command-line defined macros.
gdb/testsuite/
* gdb.base/macscp.exp: New `options' parameter `-DFROM_COMMANDLINE'.
(info_macro): Remova `decimal' declaration. New variable `nonzero'.
Replace all uses of `decimal' by `nonzero'.
(info macro FROM_COMMANDLINE): New test.
* configure.ac (--with-datarootdir, --with-docdir, --with-pdfdir,
--with-htmldir): New.
* configure: Regenerate.
gdb/doc:
* configure.ac (--with-datarootdir, --with-docdir, --with-pdfdir,
--with-htmldir): New.
* configure: Regenerate.
* Makefile.in (datarootdir, docdir): Define.
(gdb.dvi, gdb.pdf): Use same -I options as for building gdb.info
instead of $(SET_TEXINPUTS).
(gdbint.dvi, gdbint.pdf): Use same -I options as for building
gdbint.info instead of $(SET_TEXINPUTS).
(gdbint/index.html): Use same -I options as for building
gdbint.info.
(stabs.dvi, stabs.pdf): Use same -I options as for building
stabs.info instead of $(SET_TEXINPUTS).
(stabs/index.html): Use same -I options as for building
stabs.info.
(annotate.dvi, annotate.pdf): Use same -I options as for building
annotate.info instead of $(SET_TEXINPUTS).
(annotate/index.html): Use same -I options as for building
annotate.info.
2009-04-18 Carlos O'Donell <carlos@codesourcery.com>
* Makefile.in (MAKEHTML): Set to makeinfo --html.
(MAKEHTMLFLAGS): Set to empty.
gdb/doc:
2009-04-18 Carlos O'Donell <carlos@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
* Makefile.in (MAKEHTML): Set to makeinfo --html.
(MAKEHTMLFLAGS): Set to empty.
(html__strip_dir): Define.
(HTMLFILES): Define.
(HTMLFILES_INSTALL): Define.
(install-html): Copy new automake rule.
(html): Depend on $(HTMLFILES).
(gdb_toc.html): Rename to gdb/index.html.
(gdbint_toc.html): Rename to gdbint/index.html.
(stabs_toc.html): Rename to stabs/index.html.
(annotate_toc.html): Rename to annotate/index.html.
example, and add a small explanation about it.
(Print Settings): Change the documentation of the "set print
frame-arguments" to reflect the fact that the default is now "scalars".
Change gdb.Value.address from a method to an attribute.
* python/python-value.c (value_object): Add `address' element.
(valpy_dealloc): Decrement reference to self->address if set.
(valpy_new): Initialize val_obj->address.
(valpy_address): Rename to ...
(valpy_get_address): ... this. Change signature from method to
attribute. Update self->address if not set.
(value_to_value_object): Initialize val_obj->address.
(value_object_getset): Add `address' element.
(value_object_methods): Remove `address' element.
gdb/testsuite/
* gdb.python/python-value.exp: Add tests for the address
attribute.
gdb/doc/
* gdb.texinfo (Values From Inferior): Change gdb.Value.address
from a method to an attribute.
* mi/mi-interp.c (mi_interpreter_init): Attach mi_about_to_proceed
to the about_to_proceed observer notification.
(mi_about_to_proceed): New.
(mi_on_resume): Only output ^running and the prompt here if the
target was proceeded.
* breakpoint.c (breakpoint_proceeded): New static.
(breakpoint_about_to_proceed): New.
(_initialize_breakpoints): Attach breakpoint_about_to_proceed to
the about_to_proceed observer notification.
* inferior.h (breakpoint_proceeded): Delete declaration.
* infrun.c (clear_proceed_status): Don't set breakpoint_proceeded.
Notify the about_to_proceed observers.
(struct inferior_status): Delete breakpoint_proceeded member.
(save_inferior_status): Don't save it.
(restore_inferior_status): Don't restore it.
* mi-main.h (mi_proceeded): Declare.
* mi/mi-main.c (mi_cmd_execute): Clear mi_proceeded before running
a command.
gdb/doc/
* observer.texi (about_to_proceed): New.
* gdbint.texinfo (everywhere): Use braces {} in @deftypeXX type
field throughout to handle types with spaces in them. Fix typos
found by aspell.
(Summary, Requirements, Contributors): New first chapter,
"Summary" added, old Requirements section moved there, and new
section, "Contributors" added.
(Initializing a New Architecture, Register Representation)
(Frame Interpretation, Inferior Call Setup, Adding a New Target)
(Porting gdb): These sections extended and updated.
(Compiler Characteristics): This section (empty) deleted.
(Defining Other Architecture Features): This section renamed and
duplicate material removed from (formerly "Target Conditionals").
Use braces {} in @deftypeXX type field throughout to handle types
with spaces in them. Typos found by aspell fixed.
* stack_frame.svg: New file, source of image for gdbint.texinfo.
* stack_frame.pdf: Version of image for PDF output.
* stack_frame.png: Version of image for HTML output and for Emacs.
* stack_frame.txt: Version of image for Info output.
2009-03-21 Jan Kratochvil <jan.kratochvil@redhat.com>
Jim Blandy <jimb@red-bean.com>
Thiago Jung Bauermann <bauerman@br.ibm.com>
Tom Tromey <tromey@redhat.com>
Miscellaneous fixes to the Python code.
* python/python-cmd.c (cmdpy_init): Accept keyword
arguments.
* python/python-value.c (valpy_string): Accept keyword
arguments.
(valpy_binop): Use `break' to exit from the TRY_CATCH block.
Do not call value_to_value_object on NULL RES_VAL.
(value_object_methods): Change `string' entry to also accept
keyword arguments.
(convert_value_from_python): Return a copy of the value if obj is
a gdb.Value object.
(value_object_methods): Mark the `string' method as accepting
keywords, and show method "prototype" in the doc string.
* python/python.c (get_parameter): Don't return inside a
TRY_CATCH.
gdb/doc/
2009-03-21 Thiago Jung Bauermann <bauerman@br.ibm.com>
* gdb.texinfo (Values From Inferior): Fix optional arguments
markup.
(Commands In Python): Adjust argument names of gdb.Command.__init__
to what the function accepts as keywords.
gdb/testsuite/
2009-03-21 Thiago Jung Bauermann <bauerman@br.ibm.com>
* gdb.python/python-cmd.exp: Add tests for keyword arguments.
* gdb.python/python-function.exp: Add test for function returning
a GDB value.
* stack.c (return_command <retval_exp>): New variables retval_expr
and old_chain. Inline parse_and_eval to initialize retval_expr. Check
RETVAL_EXPR for UNOP_CAST and set RETURN_TYPE to the RETURN_VALUE type
if RETURN_TYPE is NULL.
gdb/doc/
* gdb.texinfo (Returning): New description for missing debug info.
gdb/testsuite/
* gdb.base/return-nodebug.exp, gdb.base/return-nodebug.c: New.
gdb/
* remote.c (PACKET_qAttached): New.
(remote_query_attached): New.
(remote_add_inferior): Add new `attached' argument. Handle it.
(remote_notice_new_inferior, remote_start_remote): Adjust to pass
-1 to remote_add_inferior in new parameter.
(extended_remote_attach_1): Adjust to pass 1 to
remote_add_inferior in the new parameter.
(extended_remote_create_inferior_1): Adjust to pass 0 to
remote_add_inferior in the new parameter.
(_initialize_remote): Add "set/show remote query-attached-packet"
commands.
2009-03-14 Pedro Alves <pedro@codesourcery.com>
gdb/gdbserver/
* server.c (handle_query): Handle "qAttached".
2009-03-14 Pedro Alves <pedro@codesourcery.com>
gdb/doc/
* gdb.texinfo (Remote Configuration): Document query-attached.
(General Query Packets): Document qAttached.
(mi_interpreter_init): Register the above.
* solib.c (clear_solib): Notify solib unload.
* breakpoint.c (disable_breakpoints_in_unloaded_shlib): Do not
disable breakpoints on a.out targets.
* ada-tasks.c (ada_normal_stop_observer): Adjust prototype.
* infcmd.c (finish_command_continuation): Pass '1' for
'print_frame' parameter to the observer.
* infrun.c (normal_stop): Don't print mi-specific information
here. Pass 'stop_print_frame' to the 'print_frame' parameter
of the observer.
* mi/mi-interp.c (mi_on_normal_stop): Adjust prototype.
If we need to print frame, and current uiout is not the MI one,
print frame again.
2009-02-06 Jim Blandy <jimb@codesourcery.com>
Daniel Jacobowitz <dan@codesourcery.com>
Vladimir Prus <vladimir@codesourcery.com>
Pedro Alves <pedro@codesourcery.com>
* defs.h (enum lval_type): New value: lval_computed.
* value.h (struct lval_funcs): New type.
(allocate_computed_value, value_computed_funcs)
(value_computed_closure): New declarations.
* value.c (struct value): Add a structure to the location union
for computed lvalues, containing 'funcs' and 'closure' members.
(allocate_computed_value, value_computed_funcs)
(value_computed_closure): New functions.
(value_free): For computed lvalues, call the closure's
'free_closure' function before freeing the value itself.
(value_copy): If we're copying an lval_computed value, call the
closure's 'copy_closure' function.
(set_value_component_location): If the original value is a
computed lvalue, then call the closure's 'copy_closure' function.
(value_of_internalvar): If an internal variable's value is a
computed lvalue, make retrieving its value produce an equivalent
computed lvalue.
* valops.c (value_fetch_lazy): Unlazy computed lvalues by calling
their read function.
(value_assign): Assign to computed lvalues by calling their write
function.
gdb/doc/
2009-02-06 Pedro Alves <pedro@codesourcery.com>
* gdbint.texinfo (Values): New chapter.
2009-02-04 Tom Tromey <tromey@redhat.com>
Thiago Jung Bauermann <bauerman@br.ibm.com>
Phil Muldoon <pmuldoon@redhat.com>
* python/python-internal.h (gdbpy_get_value_from_history): Rename
prototype to gdbpy_history.
(gdbpy_is_string): Declare.
(python_string_to_host_string): Declare.
* python/python-utils.c (gdbpy_is_string): New function.
(unicode_to_encoded_string): New function.
(unicode_to_target_string): Use it.
(python_string_to_host_string): New function.
* python/python-value.c (valpy_address): New function.
(convert_value_from_python): Use gdbpy_is_string. Change to throw
Python exception instead of a GDB exception on error. Properly check
Python booleans.
(valpy_getitem): Convert field name to host string. Handle array
accesses. Adapt to new behaviour of convert_value_from_python.
(valpy_new): Adapt to new behaviour of convert_value_from_python.
(enum valpy_opcode) <VALPY_LSH, VALPY_RSH, VALPY_BITAND,
VALPY_BITXOR, VALPY_BITOR>: New constants.
(valpy_binop): Update. Adapt to new behaviour of
convert_value_from_python.
(valpy_invert): New function.
(valpy_lsh): Likewise.
(valpy_rsh): Likewise.
(valpy_and): Likewise.
(valpy_or): Likewise.
(valpy_xor): Likewise.
(valpy_richcompare): Call convert_value_from_python instead of doing
conversions itself.
(is_intlike, valpy_int, valpy_long, valpy_float): New functions.
(gdbpy_get_value_from_history): Rename
function to gdbpy_history.
(gdbpy_initialize_values): Don't set tp_new.
(value_object_type): Add valpy_new.
(value_object_methods): Add `address' entry.
(value_object_as_number): Update for new methods.
* python/python.c (GdbMethods): Rename entry from
`get_value_from_history' to `history'.
gdb/doc/
2009-02-04 Tom Tromey <tromey@redhat.com>
* gdb.texinfo (Basic Python): Document gdb.history.
gdb/testsuite/
2009-02-04 Tom Tromey <tromey@redhat.com>
Thiago Jung Bauermann <bauerman@br.ibm.com>
* gdb.python/python-value.exp: Use `gdb.history' instead of
`gdb.value_from_history'.
(test_value_numeric_ops): Add test for conversion of enum constant.
* gdb.python/python-value.c (enum e): New type.
(evalue): New global.
(main): Use argv.
(break_command_really, set_breakpoint): New parameter enabled.
(create_breakpoint, break_command_really): Make breakpoint
disabled if so requested.
* breakpoint.h (set_breakpoint): New parameter enabled.
* mi/mi-cmd-break.c (mi_cmd_break_insert): Handle the -d option.
Carlos O'Donell <carlos@codesourcery.com>
Fixes for makeinfo --html.
* annotate.texinfo: Use @copying and @insertcopying. Use
@ifnottex in place of @ifinfo.
* gdb.texinfo: Use @copying and @insertcopying. Use @ifnottex in
place of @ifinfo. Use @ifnotinfo for one index entry.
* gdbint.texinfo: Use @copying and @insertcopying. Use @ifnottex
in place of @ifinfo.
* stabs.texinfo: Use @copying and @insertcopying. Use @ifnottex
in place of @ifinfo. Include contents at start unconditionally.
2009-01-07 Pedro Alves <pedro@codesourcery.com>
Delete ONE_PROCESS_WRITETEXT leftovers.
* breakpoint.c (insert_bp_location): Delete process_warning
argument. Adjust.
(insert_breakpoint_locations): Adjust.
(reattach_breakpoints): Adjust.
* infrun.c (normal_stop): Drop "It might be running in another
process" notice.
gdb/doc/
2009-01-07 Pedro Alves <pedro@codesourcery.com>
* gdb.texinfo (Error in Breakpoints): Delete mention of "The same
program may be running in another process" errors.
* gdbint.texinfo (Native Conditionals): Delete
ONE_PROCESS_WRITETEXT description.
emacs local variable to be placed at the end of the ChangeLog.
Add server.c and gdbreplay.c to the list of files where the
copyright year needs to be updated.
gdb/
* ser-tcp.c: Adjust includes.
(tcp_set_cmdlist, tcp_show_cmdlist): Declare.
(tcp_auto_retry, tcp_retry_limit): Declare.
(TIMEOUT): Remove, in favor of tcp_retry_limit.
(POLL_INTERVAL): Increase to 5, in favor of backoff logic.
(wait_for_connect): New function.
(net_open): Use it. Add auto-retry logic.
(set_tcp_cmd, show_tcp_cmd): New functions.
(_initialize_ser_tcp): Initialize new "set/show tcp auto-retry"
and "set/show tcp connect-timeout" commands.
* NEWS: Document new commands.
gdb/doc/
* gdb.texinfo (Remote Configuration): Document new
"set/show tcp auto-retry" and "set/show tcp connect-timeout"
commands.
2008-11-27 Tristan Gingold <gingold@adacore.com>
* NEWS: Add entry for new native configuration: Darwin.
* configure.host: Add Darwin host.
* configure.tgt: Add Darwin target.
* defs.h (enum gdb_osabi): Add GDB_OSABI_DARWIN.
* osabi.c (gdb_osabi_names): Add name for Darwin abi.
* i386-darwin-nat.c: New file.
* i386-darwin-tdep.c: New file.
* machoread.c: New file.
* darwin-nat-info.c: New file.
* darwin-nat.c: New file.
* darwin-nat.h: New file.
* darwin.defs: New file.
* config/i386/darwin.mh: New file.
gdb/doc:
2008-11-27 Tristan Gingold <gingold@adacore.com>
* gdb.texinfo (Darwin): Document Darwin specific features.
* mi/mi-common.h (struct mi_interp): New, moved from ...
* mi/mi-interp.c: ...here.
* mi/mi-main.c (mi_execute_command): If the thread changed
as result of command, report that.
Pedro Alves <pedro@codesourcery.com>
* infrun.c (can_use_displaced_stepping): Change type to
const char pointer.
(can_use_displaced_stepping_auto): New string.
(can_use_displaced_stepping_on): New string.
(can_use_displaced_stepping_off): New string.
(can_use_displaced_stepping_enum): New array.
(show_can_use_displaced_stepping): In auto mode, also show
the current effect of the option.
(use_displaced_stepping): Return non-zero if displaced
stepping is auto, and can be used with GDBARCH, and in
non-stop mode. Return non-zero if displaced stepping is on,
and can be used with GDBARCH. Return zero otherwise.
(_initialize_infrun): Make the "set displaced-stepping"
command an enum command. Change its class to class_run.
Place it in the top level set list. Extend help to describe
the auto mode.
2008-10-24 Hui Zhu <teawater@gmail.com>
Pedro Alves <pedro@codesourcery.com>
* gdb.texinfo (displaced-stepping): Describe the auto mode
setting, and say it's the default. This is now a mainstream
setting instead of a maintenance setting.
2008-10-23 Pedro Alves <pedro@codesourcery.com>
* defs.h: Mention ptid_is_pid.
* inferior.h (ptid_is_pid): Declare.
* gdbthread.h (struct thread_info) <stop_requested>: New field.
(set_stop_requested): Declare.
* infcmd.c (interrupt_target_1): Call set_stop_requested.
* infrun.c (clear_proceed_status): Clear stop_requested.
(infrun_thread_stop_requested_callback,
infrun_thread_stop_requested): New.
(handle_inferior_event): If a TARGET_SIGNAL_TRAP is reported on a
thread that had an explicit stop request, pretend we got a
TARGET_SIGNAL_0. Always stop if the thread had an explicit stop
request.
(print_stop_reason): In the SIGNAL_RECEIVED case, if we're not
outputting to MI, and we got a TARGET_SIGNAL_0, print "# Stopped",
instead of mentioning signal 0.
(ptid_is_pid): New.
* thread.c (set_stop_requested): New.
* linux-nat.c (queued_waitpid): Rename to ...
(queued_waitpid_1): ... this. Add `peek' argument. Handle it.
(queued_waitpid): New, as wrapper to queued_waitpid_1.
(push_waitpid): Push the SIGTRAP to the local event queue, to the
kernel's.
(send_sigint_callback): Delete.
(linux_nat_stop_lwp): New.
(linux_nat_stop): Use it.
gdb/doc/
2008-10-23 Pedro Alves <pedro@codesourcery.com>
* observer.texi (thread_stop_requested): New.
gdb/testsuite/
2008-10-23 Pedro Alves <pedro@codesourcery.com>
* lib/mi-support.exp (mi_expect_interrupt): Expect signal 0
instead of SIGINT.
(dump_die_shallow): Renamed from dump_die, New args f, indent.
Print to specified file, indented by the specified amount.
(dump_die_for_error): New fn. Point all existing callers of
dump_die here.
(dump_die_die_1,dump_die): New fns, replaces ...
(dump_die_list): ... deleted.
(read_die_and_children_1): Old contents of read_die_and_children
moved here.
(read_die_and_children): Rewrite.
(read_die_and_siblings): Call read_die_and_children_1 instead of
read_die_and_children.
(_initialize_dwarf2_read): New option "debug dwarf2-die".
* gdbinit.in (pdie): New macro.
* doc/gdb.texinfo (set debug dwarf2-die): Document it.
(ENTRY_INVALID,ENTRY_VALID): Renamed from ENTRY_BAD,ENTRY_OK.
All uses updated.
(dcache_info): Print cache state as mnemonically useful letters instead
of magic numbers.
* doc/gdb.texinfo (info dcache): Update.
gdb/doc
* gdb.texinfo (Packets): Add info on thread-id syntax and
multiprocess extensions.
<D>: Document multiprocess form of packet.
<H>: Use thread-id syntax.
<T>: Likewise.
<vCont>: Likewise. Note this is required for multiprocess.
<vKill>: New packet.
(Stop Reply Packets) <T>: Use thread-id syntax.
<W>: Document multiprocess form of reply.
<X>: Likewise.
(General Query Packets) <qC>: Use thread-id syntax.
<qfThreadInfo>: Likewise.
<qGetTLSAddr>: Likewise.
<qP>: Likewise.
<qSupported>: Add "multiprocess" feature.
<qThreadExtraInfo>: Use thread-id syntax.
* ser-tcp.c (ser_tcp_send_break): New function.
(_initialize_ser_tcp): Use ser_tcp_send_break.
* ser-tcp.h (ser_tcp_send_break): New prototype.
2008-09-03 Angela Marie Thomas <angela@releasedominatrix.com>
* gdb.texinfo (Interrupts): Mention TCP interface for
sending BREAK.
* breakpoint.c (always_inserted_auto, always_inserted_on)
(always_inserted_off, always_inserted_enums): New.
(always_inserted_mode): Change type to char* and point to
always_inserted_auto.
(show_always_inserted_mode): In auto mode, also show the current
effect of the option.
(breakpoints_always_inserted_mode): Adjust for the new auto mode.
(_initialize_breakpoint): Make the "set breakpoints
always-inserted" command an enum command. Extend help to describe
the auto mode.
gdb/doc/
* gdb.texinfo (breakpoint always-inserted) Describe the auto mode
setting, and make it the default.
(Non-Stop Mode): Remove "set breakpoints always-inserted 1" from
non-stop script example.
2008-08-12 Sandra Loosemore <sandra@codesourcery.com>
* gdb.texinfo (Remote Configuration): Document set remote noack-packet.
(Remote Protocol): Add Packet Acknowledgment to menu.
(Overview): Mention +/- can be disabled, and point to new section
where this is discussed in detail.
(General Query Packets): Document QStartNoAckMode packet, and
corresponding qSupported reply.
(Packet Acknowledgment): New section.
gdb/
2008-08-12 Pedro Alves <pedro@codesourcery.com>
Add no-ack mode to the remote protocol --- optionally stop ACKing
packets and responses when we have a reliable communication
medium.
Based on Apple's GDB, by Jason Molenda <jmolenda@apple.com>
* remote.c (struct remote_state): Add noack_mode field.
(PACKET_QStartNoAckMode): New.
(remote_start_remote): Don't any outstanding packet here.
(remote_open_1): Clear noack_mode. Ack any outstanding packet
here. Activate noack mode if requested.
(remote_protocol_features): Add QStartNoAckMode.
(remote_open_1):
(putpkt_binary): Don't send ack in noack mode.
(read_frame): Don't recompute the checksum in noack mode.
(getpkt_sane): Skip sending ack if in noack mode.
(_initialize_remote): Add set/show remote noack mode.
* NEWS: Note the new features.
gdb/gdbserver/
2008-08-12 Pedro Alves <pedro@codesourcery.com>
* remote-utils.c (noack_mode, transport_is_reliable): New globals.
(remote_open): Set or clear transport_is_reliable.
(putpkt_binary): Don't expect acks in noack mode.
(getpkt): Don't send ack/nac in noack mode.
* server.c (handle_general_set): Handle QStartNoAckMode.
(handle_query): If connected by tcp pass QStartNoAckMode+ in
qSupported.
(main): Reset noack_mode on every connection.
* server.h (noack_mode): Declare.
Pedro Alves <pedro@codesourcery.com>
gdb/doc
* gdb.texinfo (Threads): Move paragraph about automatic thread
selection to All-Stop Mode subsection.
(Thread Stops): Reorganize existing material into subsections.
Add introductory blurb and menu.
(Non-Stop Mode): New subsection.
(Background Execution): New subsection.
(Maintenance Commands): Add cross-references from async mode
commands to the new Background Execution section.
clarifications.
(Breakpoint Handling): Remove mention of BREAKPOINT macro.
(Longjmp Support): Update description to reflect how it is done
for targets without using native header.
(Symbol Handling): Add a little more general explanation.
(COFF, ELF): Mention stabs encapsulation.
(DWARF 3): New section.
(Adding a New Host): Scrub out some obsolete bits.
(Generic Host Support Files): Mention ser-pipe.c, ser-mingw.c.
(Host Conditionals): Remove descriptions of NO_STD_REGS,
HAVE_MMAP, HAVE_TERMIO, INT_MAX etc, LONGEST, HAVE_LONG_DOUBLE,
PRINTF_HAS_LONG_DOUBLE, SCANF_HAS_LONG_DOUBLE, L_SET, SEEK_CUR,
SEEK_SET, STOP_SIGNAL, USG.
(Raw and Virtual Register Representations): Ditto for
DEPRECATED_REGISTER_RAW_SIZE, DEPRECATED_REGISTER_VIRTUAL_SIZE,
DEPRECATED_REGISTER_VIRTUAL_TYPE, REGISTER_CONVERT_TO_TYPE.
(Target Conditionals): Ditto for DEPRECATED_FP_REGNUM,
DEPRECATED_FRAMELESS_FUNCTION_INVOCATION, DEPRECATED_FRAME_CHAIN,
DEPRECATED_FRAME_CHAIN_VALID, DEPRECATED_FRAME_INIT_SAVED_REGS,
DEPRECATED_FRAME_SAVED_PC, DEPRECATED_FUNCTION_START_OFFSET,
DEPRECATED_REGISTER_VIRTUAL_SIZE,
DEPRECATED_REGISTER_VIRTUAL_TYPE,
DEPRECATED_USE_STRUCT_CONVENTION.
Describe gdbarch_deprecated_fp_regnum.
Update description of gdbarch_print_insn.
(Adding a New Target): Scrub out obsolete bits.
(Obsolete Conditionals): Remove entire section.
(arm_force_mode_string, arm_show_fallback_mode)
(arm_show_force_mode): New.
(arm_pc_is_thumb): Honor fallback-mode and force-mode. Use
arm_frame_is_thumb.
(_initialize_arm_tdep): Add "set arm fallback-mode"
and "set arm force-mode".
* NEWS: Document new commands.
* gdb.texinfo (ARM): Document set/show arm fallback-mode
and set/show arm force-mode.
to_watchpoint_addr_within_range.
(target_watchpoint_addr_within_range): New function.
* target.c (update_current_target): Inherit
to_watchpoint_addr_within_range, defaulting to
default_watchpoint_addr_within_range.
(default_watchpoint_addr_within_range): New function.
(debug_to_watchpoint_addr_within_range): New function.
(setup_target_debug): Set to_watchpoint_addr_within_range.
* ppc-linux-nat.c (ppc_linux_watchpoint_addr_within_range):
New function.
(_initialize_ppc_linux_nat): Set to_watchpoint_addr_within_range.
* breakpoint.c (watchpoints_triggered): Use
target_watchpoint_addr_within_range.
* gdbint.texinfo (Algorithms): Describe
target_watchpoint_addr_within_range.
(previous_async_command): Remove.
(mi_cmd_gdb_exit): Adjust.
(mi_cmd_exec_interrupt): Don't dance with previous_async_command.
(mi_cmd_target_select): Adjust.
(mi_cmd_execute): Don't set previous_async_command. Free token
here even in async mode.
(mi_execute_async_cli_command): Adjust.
(mi_exec_async_cli_cmd_continuation): Adjust. Do not free the
token.
(mi_load_progress): Adjust.