Cleanups after the update to Autoconf 2.64, Automake 1.11.

/:
	* README-maintainer-mode: Point directly to upstream locations
	for autoconf, automake, libtool, gettext, instead of copies on
	sources.redhat.com.  Document required versions.
	* configure.ac: Do not substitute datarootdir, htmldir,
	pdfdir, docdir.  Do not process --with-datarootdir,
	--with-htmldir, --with-pdfdir, --with-docdir.
	* configure: Regenerate.

gdb/:
	* CONTRIBUTE: Bump documented Autoconf version.
	* configure.ac: Do not substitute datarootdir, htmldir,
	pdfdir, docdir.  Do not process --with-datarootdir,
	--with-htmldir, --with-pdfdir, --with-docdir.
	* configure: Regenerate.

gdb/doc/:
	* gdbint.texinfo (Releasing GDB): Point to
	README-maintainer-mode file for required autoconf version.
	* configure.ac: Do not substitute datarootdir, htmldir,
	pdfdir, docdir.  Do not process --with-datarootdir,
	--with-htmldir, --with-pdfdir, --with-docdir.
	* configure: Regenerate.

gprof/:
	* Makefile.am (pdf__strip_dir, install-pdf, install-pdf-am)
	(install-pdf-recursive, html__strip_dir, install-html)
	(install-html-am, install-html-recursive): Remove.
	* Makefile.in: Regenerate.

opcodes/:
	* Makefile.am (install-pdf, install-html): Remove.
	* Makefile.in: Regenerate.

gas/:
	* Makefile.am (install-pdf, install-pdf-recursive, install-html)
	(install-html-recursive): Remove.
	* Makefile.in: Regenerate.
	* doc/Makefile.am (pdf__strip_dir, install-pdf, install-pdf-am)
	(html__strip_dir, install-html, install-html-am): Remove.
	* doc/Makefile.in: Regenerate.

ld/:
	* Makefile.am (pdf__strip_dir, install-pdf, install-pdf-am)
	(install-pdf-recursive, html__strip_dir, install-html)
	(install-html-am, install-html-recursive): Remove.
	* Makefile.in: Regenerate.

binutils/:
	* Makefile.am (install-pdf, install-pdf-recursive, install-html)
	(install-html-recursive): Remove.
	* Makefile.in: Regenerate.
	* doc/Makefile.am (pdf__strip_dir, install-pdf, install-pdf-am)
	(html__strip_dir, install-html, install-html-am): Remove.
	* doc/Makefile.in: Regenerate.

bfd/:
	* Makefile.am (datarootdir, docdir, htmldor, pdfdir)
	(install-pdf, install-pdf-recursive, install-html)
	(install-html-recursive): Remove.
	* Makefile.in: Regenerate.

bfd/doc/:
	* Makefile.am (pdf__strip_dir, install-pdf, install-pdf-am)
	(html__strip_dir, install-html, install-html-am): Remove.
	* Makefile.in: Regenerate.
This commit is contained in:
Ralf Wildenhues 2009-08-22 17:08:11 +00:00
parent 81ecdfbb4d
commit af542c2e31
37 changed files with 269 additions and 1155 deletions

View file

@ -1,5 +1,13 @@
2009-08-22 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
* README-maintainer-mode: Point directly to upstream locations
for autoconf, automake, libtool, gettext, instead of copies on
sources.redhat.com. Document required versions.
* configure.ac: Do not substitute datarootdir, htmldir,
pdfdir, docdir. Do not process --with-datarootdir,
--with-htmldir, --with-pdfdir, --with-docdir.
* configure: Regenerate.
* configure: Regenerate.
* compile: Sync from Automake 1.11.

View file

@ -3,7 +3,18 @@
Note that if you configure with --enable-maintainer-mode, you will need
special versions of automake, autoconf, libtool and gettext. You will
find the sources for these in ftp://sources.redhat.com/pub/binutils.
find the sources for these in the respective upstream directories:
ftp://ftp.gnu.org/gnu/autoconf
ftp://ftp.gnu.org/gnu/automake
ftp://ftp.gnu.org/gnu/libtool
ftp://ftp.gnu.org/gnu/gettext
The required versions of the tools for this tree are
autoconf 2.64
automake 1.11
libtool 2.2.6
gettext 0.14.5
Note - "make distclean" does not work with maintainer mode enabled.
The Makefiles in the some of the po/ subdirectories depend upon the

View file

@ -1,5 +1,10 @@
2009-08-22 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
* Makefile.am (datarootdir, docdir, htmldor, pdfdir)
(install-pdf, install-pdf-recursive, install-html)
(install-html-recursive): Remove.
* Makefile.in: Regenerate.
* Makefile.in: Regenerate.
* aclocal.m4: Likewise.
* config.in: Likewise.

View file

@ -16,11 +16,6 @@ bfddocdir = doc
bfdlibdir = @bfdlibdir@
bfdincludedir = @bfdincludedir@
datarootdir = @datarootdir@
docdir = @docdir@
htmldir = @htmldir@
pdfdir = @pdfdir@
bfdlib_LTLIBRARIES = libbfd.la
WARN_CFLAGS = @WARN_CFLAGS@
@ -723,64 +718,6 @@ po/BLD-POTFILES.in: @MAINT@ Makefile $(BLD_POTFILES)
all diststuff: info
.PHONY: install-pdf install-pdf-am install-pdf-recursive
install-pdf: install-pdf-recursive
install-pdf-recursive:
@failcom='exit 1'; \
for f in x $$MAKEFLAGS; do \
case $$f in \
*=* | --[!k]*);; \
*k*) failcom='fail=yes';; \
esac; \
done; \
dot_seen=no; \
target=`echo $@ | sed s/-recursive//`; \
list='$(SUBDIRS)'; for subdir in $$list; do \
echo "Making $$target in $$subdir"; \
if test "$$subdir" = "."; then \
dot_seen=yes; \
local_target="$$target-am"; \
else \
local_target="$$target"; \
fi; \
(cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| eval $$failcom; \
done; \
if test "$$dot_seen" = "no"; then \
$(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
fi; test -z "$$fail"
.PHONY: install-html install-html-am install-html-recursive
install-html: install-html-recursive
install-html-recursive:
@failcom='exit 1'; \
for f in x $$MAKEFLAGS; do \
case $$f in \
*=* | --[!k]*);; \
*k*) failcom='fail=yes';; \
esac; \
done; \
dot_seen=no; \
target=`echo $@ | sed s/-recursive//`; \
list='$(SUBDIRS)'; for subdir in $$list; do \
echo "Making $$target in $$subdir"; \
if test "$$subdir" = "."; then \
dot_seen=yes; \
local_target="$$target-am"; \
else \
local_target="$$target"; \
fi; \
(cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| eval $$failcom; \
done; \
if test "$$dot_seen" = "no"; then \
$(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
fi; test -z "$$fail"
# Various kinds of .o files to put in libbfd.a:
# BFD_BACKENDS Routines the configured targets need.
# BFD_MACHINES Architecture-specific routines the configured targets need.

View file

@ -1328,6 +1328,8 @@ install-dvi-am:
install-exec-am:
install-html: install-html-recursive
install-html-am:
install-info: install-info-recursive
@ -1336,6 +1338,8 @@ install-info-am:
install-man:
install-pdf: install-pdf-recursive
install-pdf-am:
install-ps: install-ps-recursive
@ -1398,64 +1402,6 @@ po/BLD-POTFILES.in: @MAINT@ Makefile $(BLD_POTFILES)
all diststuff: info
.PHONY: install-pdf install-pdf-am install-pdf-recursive
install-pdf: install-pdf-recursive
install-pdf-recursive:
@failcom='exit 1'; \
for f in x $$MAKEFLAGS; do \
case $$f in \
*=* | --[!k]*);; \
*k*) failcom='fail=yes';; \
esac; \
done; \
dot_seen=no; \
target=`echo $@ | sed s/-recursive//`; \
list='$(SUBDIRS)'; for subdir in $$list; do \
echo "Making $$target in $$subdir"; \
if test "$$subdir" = "."; then \
dot_seen=yes; \
local_target="$$target-am"; \
else \
local_target="$$target"; \
fi; \
(cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| eval $$failcom; \
done; \
if test "$$dot_seen" = "no"; then \
$(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
fi; test -z "$$fail"
.PHONY: install-html install-html-am install-html-recursive
install-html: install-html-recursive
install-html-recursive:
@failcom='exit 1'; \
for f in x $$MAKEFLAGS; do \
case $$f in \
*=* | --[!k]*);; \
*k*) failcom='fail=yes';; \
esac; \
done; \
dot_seen=no; \
target=`echo $@ | sed s/-recursive//`; \
list='$(SUBDIRS)'; for subdir in $$list; do \
echo "Making $$target in $$subdir"; \
if test "$$subdir" = "."; then \
dot_seen=yes; \
local_target="$$target-am"; \
else \
local_target="$$target"; \
fi; \
(cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| eval $$failcom; \
done; \
if test "$$dot_seen" = "no"; then \
$(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
fi; test -z "$$fail"
stamp-ofiles: Makefile
rm -f tofiles
f=""; \

View file

@ -1,5 +1,9 @@
2009-08-22 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
* Makefile.am (pdf__strip_dir, install-pdf, install-pdf-am)
(html__strip_dir, install-html, install-html-am): Remove.
* Makefile.in: Regenerate.
* Makefile.in: Regenerate.
2009-05-22 Alan Modra <amodra@bigpond.net.au>

View file

@ -296,41 +296,6 @@ MAINTAINERCLEANFILES = $(DOCFILES)
# cygnus option.
install: install-info
pdf__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
install-pdf: install-pdf-am
install-pdf-am: $(PDFS)
@$(NORMAL_INSTALL)
test -z "$(pdfdir)" || $(mkinstalldirs) "$(DESTDIR)$(pdfdir)"
@list='$(PDFS)'; for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
f=$(pdf__strip_dir) \
echo " $(INSTALL_DATA) '$$d$$p' '$(DESTDIR)$(pdfdir)/$$f'"; \
$(INSTALL_DATA) "$$d$$p" "$(DESTDIR)$(pdfdir)/$$f"; \
done
html__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
install-html: install-html-am
install-html-am: $(HTMLS)
@$(NORMAL_INSTALL)
test -z "$(htmldir)" || $(mkdir_p) "$(DESTDIR)$(htmldir)"
@list='$(HTMLS)'; for p in $$list; do \
if test -f "$$p" || test -d "$$p"; then d=""; else d="$(srcdir)/"; fi; \
f=$(html__strip_dir) \
if test -d "$$d$$p"; then \
echo " $(mkdir_p) '$(DESTDIR)$(htmldir)/$$f'"; \
$(mkdir_p) "$(DESTDIR)$(htmldir)/$$f" || exit 1; \
echo " $(INSTALL_DATA) '$$d$$p'/* '$(DESTDIR)$(htmldir)/$$f'"; \
$(INSTALL_DATA) "$$d$$p"/* "$(DESTDIR)$(htmldir)/$$f"; \
else \
echo " $(INSTALL_DATA) '$$d$$p' '$(DESTDIR)$(htmldir)/$$f'"; \
$(INSTALL_DATA) "$$d$$p" "$(DESTDIR)$(htmldir)/$$f"; \
fi; \
done
MAINTAINERCLEANFILES += bfd.info
# Automake 1.9 will only build info files in the objdir if they are

View file

@ -376,8 +376,6 @@ CLEANFILES = *.p *.ip
DISTCLEANFILES = bfd.?? bfd.??? bfd.h libbfd.h libcoff.h texput.log \
$(am__append_1)
MAINTAINERCLEANFILES = $(DOCFILES) bfd.info
pdf__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
html__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
all: all-am
.SUFFIXES:
@ -634,6 +632,29 @@ install-dvi-am: $(DVIS)
done
install-exec-am:
install-html: install-html-am
install-html-am: $(HTMLS)
@$(NORMAL_INSTALL)
test -z "$(htmldir)" || $(MKDIR_P) "$(DESTDIR)$(htmldir)"
@list='$(HTMLS)'; list2=; test -n "$(htmldir)" || list=; \
for p in $$list; do \
if test -f "$$p" || test -d "$$p"; then d=; else d="$(srcdir)/"; fi; \
$(am__strip_dir) \
if test -d "$$d$$p"; then \
echo " $(MKDIR_P) '$(DESTDIR)$(htmldir)/$$f'"; \
$(MKDIR_P) "$(DESTDIR)$(htmldir)/$$f" || exit 1; \
echo " $(INSTALL_DATA) '$$d$$p'/* '$(DESTDIR)$(htmldir)/$$f'"; \
$(INSTALL_DATA) "$$d$$p"/* "$(DESTDIR)$(htmldir)/$$f" || exit $$?; \
else \
list2="$$list2 $$d$$p"; \
fi; \
done; \
test -z "$$list2" || { echo "$$list2" | $(am__base_list) | \
while read files; do \
echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(htmldir)'"; \
$(INSTALL_DATA) $$files "$(DESTDIR)$(htmldir)" || exit $$?; \
done; }
install-info: install-info-am
install-info-am: $(INFO_DEPS)
@ -669,6 +690,19 @@ install-info-am: $(INFO_DEPS)
else : ; fi
install-man:
install-pdf: install-pdf-am
install-pdf-am: $(PDFS)
@$(NORMAL_INSTALL)
test -z "$(pdfdir)" || $(MKDIR_P) "$(DESTDIR)$(pdfdir)"
@list='$(PDFS)'; test -n "$(pdfdir)" || list=; \
for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
echo "$$d$$p"; \
done | $(am__base_list) | \
while read files; do \
echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pdfdir)'"; \
$(INSTALL_DATA) $$files "$(DESTDIR)$(pdfdir)" || exit $$?; done
install-ps: install-ps-am
install-ps-am: $(PSS)
@ -904,37 +938,6 @@ bfdver.texi: $(srcdir)/Makefile.in
# cygnus option.
install: install-info
install-pdf: install-pdf-am
install-pdf-am: $(PDFS)
@$(NORMAL_INSTALL)
test -z "$(pdfdir)" || $(mkinstalldirs) "$(DESTDIR)$(pdfdir)"
@list='$(PDFS)'; for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
f=$(pdf__strip_dir) \
echo " $(INSTALL_DATA) '$$d$$p' '$(DESTDIR)$(pdfdir)/$$f'"; \
$(INSTALL_DATA) "$$d$$p" "$(DESTDIR)$(pdfdir)/$$f"; \
done
install-html: install-html-am
install-html-am: $(HTMLS)
@$(NORMAL_INSTALL)
test -z "$(htmldir)" || $(mkdir_p) "$(DESTDIR)$(htmldir)"
@list='$(HTMLS)'; for p in $$list; do \
if test -f "$$p" || test -d "$$p"; then d=""; else d="$(srcdir)/"; fi; \
f=$(html__strip_dir) \
if test -d "$$d$$p"; then \
echo " $(mkdir_p) '$(DESTDIR)$(htmldir)/$$f'"; \
$(mkdir_p) "$(DESTDIR)$(htmldir)/$$f" || exit 1; \
echo " $(INSTALL_DATA) '$$d$$p'/* '$(DESTDIR)$(htmldir)/$$f'"; \
$(INSTALL_DATA) "$$d$$p"/* "$(DESTDIR)$(htmldir)/$$f"; \
else \
echo " $(INSTALL_DATA) '$$d$$p' '$(DESTDIR)$(htmldir)/$$f'"; \
$(INSTALL_DATA) "$$d$$p" "$(DESTDIR)$(htmldir)/$$f"; \
fi; \
done
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:

View file

@ -1,5 +1,12 @@
2009-08-22 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
* Makefile.am (install-pdf, install-pdf-recursive, install-html)
(install-html-recursive): Remove.
* Makefile.in: Regenerate.
* doc/Makefile.am (pdf__strip_dir, install-pdf, install-pdf-am)
(html__strip_dir, install-html, install-html-am): Remove.
* doc/Makefile.in: Regenerate.
* Makefile.in: Regenerate.
* aclocal.m4: Likewise.
* config.in: Likewise.

View file

@ -116,64 +116,6 @@ OPCODES = ../opcodes/libopcodes.la
LIBIBERTY = ../libiberty/libiberty.a
.PHONY: install-pdf install-pdf-am install-pdf-recursive
install-pdf: install-pdf-recursive
install-pdf-recursive:
@failcom='exit 1'; \
for f in x $$MAKEFLAGS; do \
case $$f in \
*=* | --[!k]*);; \
*k*) failcom='fail=yes';; \
esac; \
done; \
dot_seen=no; \
target=`echo $@ | sed s/-recursive//`; \
list='$(SUBDIRS)'; for subdir in $$list; do \
echo "Making $$target in $$subdir"; \
if test "$$subdir" = "."; then \
dot_seen=yes; \
local_target="$$target-am"; \
else \
local_target="$$target"; \
fi; \
(cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| eval $$failcom; \
done; \
if test "$$dot_seen" = "no"; then \
$(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
fi; test -z "$$fail"
.PHONY: install-html install-html-am install-html-recursive
install-html: install-html-recursive
install-html-recursive:
@failcom='exit 1'; \
for f in x $$MAKEFLAGS; do \
case $$f in \
*=* | --[!k]*);; \
*k*) failcom='fail=yes';; \
esac; \
done; \
dot_seen=no; \
target=`echo $@ | sed s/-recursive//`; \
list='$(SUBDIRS)'; for subdir in $$list; do \
echo "Making $$target in $$subdir"; \
if test "$$subdir" = "."; then \
dot_seen=yes; \
local_target="$$target-am"; \
else \
local_target="$$target"; \
fi; \
(cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| eval $$failcom; \
done; \
if test "$$dot_seen" = "no"; then \
$(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
fi; test -z "$$fail"
POTFILES = $(CFILES) $(DEBUG_SRCS) $(HFILES)
po/POTFILES.in: @MAINT@ Makefile
for f in $(POTFILES); do echo $$f; done | LC_ALL=C sort > tmp \

View file

@ -972,6 +972,8 @@ install-dvi-am:
install-exec-am: install-binPROGRAMS install-exec-local
install-html: install-html-recursive
install-html-am:
install-info: install-info-recursive
@ -980,6 +982,8 @@ install-info-am:
install-man:
install-pdf: install-pdf-recursive
install-pdf-am:
install-ps: install-ps-recursive
@ -1029,64 +1033,6 @@ uninstall-am: uninstall-binPROGRAMS
mostlyclean-libtool mostlyclean-local pdf pdf-am ps ps-am tags \
tags-recursive uninstall uninstall-am uninstall-binPROGRAMS
.PHONY: install-pdf install-pdf-am install-pdf-recursive
install-pdf: install-pdf-recursive
install-pdf-recursive:
@failcom='exit 1'; \
for f in x $$MAKEFLAGS; do \
case $$f in \
*=* | --[!k]*);; \
*k*) failcom='fail=yes';; \
esac; \
done; \
dot_seen=no; \
target=`echo $@ | sed s/-recursive//`; \
list='$(SUBDIRS)'; for subdir in $$list; do \
echo "Making $$target in $$subdir"; \
if test "$$subdir" = "."; then \
dot_seen=yes; \
local_target="$$target-am"; \
else \
local_target="$$target"; \
fi; \
(cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| eval $$failcom; \
done; \
if test "$$dot_seen" = "no"; then \
$(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
fi; test -z "$$fail"
.PHONY: install-html install-html-am install-html-recursive
install-html: install-html-recursive
install-html-recursive:
@failcom='exit 1'; \
for f in x $$MAKEFLAGS; do \
case $$f in \
*=* | --[!k]*);; \
*k*) failcom='fail=yes';; \
esac; \
done; \
dot_seen=no; \
target=`echo $@ | sed s/-recursive//`; \
list='$(SUBDIRS)'; for subdir in $$list; do \
echo "Making $$target in $$subdir"; \
if test "$$subdir" = "."; then \
dot_seen=yes; \
local_target="$$target-am"; \
else \
local_target="$$target"; \
fi; \
(cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| eval $$failcom; \
done; \
if test "$$dot_seen" = "no"; then \
$(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
fi; test -z "$$fail"
po/POTFILES.in: @MAINT@ Makefile
for f in $(POTFILES); do echo $$f; done | LC_ALL=C sort > tmp \
&& mv tmp $(srcdir)/po/POTFILES.in

View file

@ -161,41 +161,6 @@ $(DEMANGLER_NAME).1: cxxfilt.man Makefile
# cygnus option.
install-data-local: install-info
pdf__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
install-pdf: install-pdf-am
install-pdf-am: $(PDFS)
@$(NORMAL_INSTALL)
test -z "$(pdfdir)" || $(mkinstalldirs) "$(DESTDIR)$(pdfdir)"
@list='$(PDFS)'; for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
f=$(pdf__strip_dir) \
echo " $(INSTALL_DATA) '$$d$$p' '$(DESTDIR)$(pdfdir)/$$f'"; \
$(INSTALL_DATA) "$$d$$p" "$(DESTDIR)$(pdfdir)/$$f"; \
done
html__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
install-html: install-html-am
install-html-am: $(HTMLS)
@$(NORMAL_INSTALL)
test -z "$(htmldir)" || $(mkdir_p) "$(DESTDIR)$(htmldir)"
@list='$(HTMLS)'; for p in $$list; do \
if test -f "$$p" || test -d "$$p"; then d=""; else d="$(srcdir)/"; fi; \
f=$(html__strip_dir) \
if test -d "$$d$$p"; then \
echo " $(mkdir_p) '$(DESTDIR)$(htmldir)/$$f'"; \
$(mkdir_p) "$(DESTDIR)$(htmldir)/$$f" || exit 1; \
echo " $(INSTALL_DATA) '$$d$$p'/* '$(DESTDIR)$(htmldir)/$$f'"; \
$(INSTALL_DATA) "$$d$$p"/* "$(DESTDIR)$(htmldir)/$$f"; \
else \
echo " $(INSTALL_DATA) '$$d$$p' '$(DESTDIR)$(htmldir)/$$f'"; \
$(INSTALL_DATA) "$$d$$p" "$(DESTDIR)$(htmldir)/$$f"; \
fi; \
done
MAINTAINERCLEANFILES = binutils.info
# Automake 1.9 will only build info files in the objdir if they are

View file

@ -297,8 +297,6 @@ TEXI2DVI = texi2dvi -I "$(srcdir)" -I "$(top_srcdir)/../libiberty" \
-I "$(top_srcdir)/../bfd/doc" -I ../../bfd/doc
MOSTLYCLEANFILES = $(DEMANGLER_NAME).1
pdf__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
html__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
MAINTAINERCLEANFILES = binutils.info
# Automake 1.9 will only build info files in the objdir if they are
@ -604,6 +602,29 @@ install-dvi-am: $(DVIS)
done
install-exec-am:
install-html: install-html-am
install-html-am: $(HTMLS)
@$(NORMAL_INSTALL)
test -z "$(htmldir)" || $(MKDIR_P) "$(DESTDIR)$(htmldir)"
@list='$(HTMLS)'; list2=; test -n "$(htmldir)" || list=; \
for p in $$list; do \
if test -f "$$p" || test -d "$$p"; then d=; else d="$(srcdir)/"; fi; \
$(am__strip_dir) \
if test -d "$$d$$p"; then \
echo " $(MKDIR_P) '$(DESTDIR)$(htmldir)/$$f'"; \
$(MKDIR_P) "$(DESTDIR)$(htmldir)/$$f" || exit 1; \
echo " $(INSTALL_DATA) '$$d$$p'/* '$(DESTDIR)$(htmldir)/$$f'"; \
$(INSTALL_DATA) "$$d$$p"/* "$(DESTDIR)$(htmldir)/$$f" || exit $$?; \
else \
list2="$$list2 $$d$$p"; \
fi; \
done; \
test -z "$$list2" || { echo "$$list2" | $(am__base_list) | \
while read files; do \
echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(htmldir)'"; \
$(INSTALL_DATA) $$files "$(DESTDIR)$(htmldir)" || exit $$?; \
done; }
install-info: install-info-am
install-info-am: $(INFO_DEPS)
@ -639,6 +660,19 @@ install-info-am: $(INFO_DEPS)
else : ; fi
install-man: install-man1
install-pdf: install-pdf-am
install-pdf-am: $(PDFS)
@$(NORMAL_INSTALL)
test -z "$(pdfdir)" || $(MKDIR_P) "$(DESTDIR)$(pdfdir)"
@list='$(PDFS)'; test -n "$(pdfdir)" || list=; \
for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
echo "$$d$$p"; \
done | $(am__base_list) | \
while read files; do \
echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pdfdir)'"; \
$(INSTALL_DATA) $$files "$(DESTDIR)$(pdfdir)" || exit $$?; done
install-ps: install-ps-am
install-ps-am: $(PSS)
@ -815,37 +849,6 @@ $(DEMANGLER_NAME).1: cxxfilt.man Makefile
# cygnus option.
install-data-local: install-info
install-pdf: install-pdf-am
install-pdf-am: $(PDFS)
@$(NORMAL_INSTALL)
test -z "$(pdfdir)" || $(mkinstalldirs) "$(DESTDIR)$(pdfdir)"
@list='$(PDFS)'; for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
f=$(pdf__strip_dir) \
echo " $(INSTALL_DATA) '$$d$$p' '$(DESTDIR)$(pdfdir)/$$f'"; \
$(INSTALL_DATA) "$$d$$p" "$(DESTDIR)$(pdfdir)/$$f"; \
done
install-html: install-html-am
install-html-am: $(HTMLS)
@$(NORMAL_INSTALL)
test -z "$(htmldir)" || $(mkdir_p) "$(DESTDIR)$(htmldir)"
@list='$(HTMLS)'; for p in $$list; do \
if test -f "$$p" || test -d "$$p"; then d=""; else d="$(srcdir)/"; fi; \
f=$(html__strip_dir) \
if test -d "$$d$$p"; then \
echo " $(mkdir_p) '$(DESTDIR)$(htmldir)/$$f'"; \
$(mkdir_p) "$(DESTDIR)$(htmldir)/$$f" || exit 1; \
echo " $(INSTALL_DATA) '$$d$$p'/* '$(DESTDIR)$(htmldir)/$$f'"; \
$(INSTALL_DATA) "$$d$$p"/* "$(DESTDIR)$(htmldir)/$$f"; \
else \
echo " $(INSTALL_DATA) '$$d$$p' '$(DESTDIR)$(htmldir)/$$f'"; \
$(INSTALL_DATA) "$$d$$p" "$(DESTDIR)$(htmldir)/$$f"; \
fi; \
done
# Maintenance
# We need it for the taz target in ../../Makefile.in.

50
configure vendored
View file

@ -770,10 +770,6 @@ with_build_time_tools
enable_maintainer_mode
enable_stage1_checking
enable_werror
with_datarootdir
with_docdir
with_pdfdir
with_htmldir
'
ac_precious_vars='build_alias
host_alias
@ -1500,10 +1496,6 @@ Optional Packages:
map A to B, C to D ... in debug information
--with-build-time-tools=PATH
use given path to find target tools during the build
--with-datarootdir use datarootdir as the data root directory.
--with-docdir install documentation in this directory.
--with-pdfdir install pdf in this directory.
--with-htmldir install html in this directory.
Some influential environment variables:
CC C compiler command
@ -13187,48 +13179,6 @@ case ${enable_werror} in
esac
# Flags needed to enable html installing and building
# Check whether --with-datarootdir was given.
if test "${with_datarootdir+set}" = set; then :
withval=$with_datarootdir; datarootdir="\${prefix}/${withval}"
else
datarootdir="\${prefix}/share"
fi
# Check whether --with-docdir was given.
if test "${with_docdir+set}" = set; then :
withval=$with_docdir; docdir="\${prefix}/${withval}"
else
docdir="\${datarootdir}/doc"
fi
# Check whether --with-pdfdir was given.
if test "${with_pdfdir+set}" = set; then :
withval=$with_pdfdir; pdfdir="\${prefix}/${withval}"
else
pdfdir="\${docdir}"
fi
# Check whether --with-htmldir was given.
if test "${with_htmldir+set}" = set; then :
withval=$with_htmldir; htmldir="\${prefix}/${withval}"
else
htmldir="\${docdir}"
fi
# Specify what files to not compare during bootstrap.
compare_exclusions="gcc/cc*-checksum\$(objext) | gcc/ada/*tools/*"

View file

@ -3120,32 +3120,6 @@ case ${enable_werror} in
esac
AC_SUBST(stage2_werror_flag)
# Flags needed to enable html installing and building
AC_ARG_WITH(datarootdir,
[ --with-datarootdir use datarootdir as the data root directory.],
[datarootdir="\${prefix}/${withval}"],
[datarootdir="\${prefix}/share"])
AC_ARG_WITH(docdir,
[ --with-docdir install documentation in this directory.],
[docdir="\${prefix}/${withval}"],
[docdir="\${datarootdir}/doc"])
AC_ARG_WITH(pdfdir,
[ --with-pdfdir install pdf in this directory.],
[pdfdir="\${prefix}/${withval}"],
[pdfdir="\${docdir}"])
AC_ARG_WITH(htmldir,
[ --with-htmldir install html in this directory.],
[htmldir="\${prefix}/${withval}"],
[htmldir="\${docdir}"])
AC_SUBST(datarootdir)
AC_SUBST(docdir)
AC_SUBST(pdfdir)
AC_SUBST(htmldir)
# Specify what files to not compare during bootstrap.
compare_exclusions="gcc/cc*-checksum\$(objext) | gcc/ada/*tools/*"

View file

@ -1,5 +1,12 @@
2009-08-22 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
* Makefile.am (install-pdf, install-pdf-recursive, install-html)
(install-html-recursive): Remove.
* Makefile.in: Regenerate.
* doc/Makefile.am (pdf__strip_dir, install-pdf, install-pdf-am)
(html__strip_dir, install-html, install-html-am): Remove.
* doc/Makefile.in: Regenerate.
* Makefile.in: Regenerate.
* aclocal.m4: Likewise.
* config.in: Likewise.

View file

@ -728,64 +728,6 @@ MOSTLYCLEANFILES = $(STAGESTUFF) core \
CLEANFILES = dep.sed DEPTC DEPTCA DEPOBJ DEPOBJA DEP2 DEP2A DEP1 DEPA DEP DEPDIR
.PHONY: install-pdf install-pdf-am install-pdf-recursive
install-pdf: install-pdf-recursive
install-pdf-recursive:
@failcom='exit 1'; \
for f in x $$MAKEFLAGS; do \
case $$f in \
*=* | --[!k]*);; \
*k*) failcom='fail=yes';; \
esac; \
done; \
dot_seen=no; \
target=`echo $@ | sed s/-recursive//`; \
list='$(SUBDIRS)'; for subdir in $$list; do \
echo "Making $$target in $$subdir"; \
if test "$$subdir" = "."; then \
dot_seen=yes; \
local_target="$$target-am"; \
else \
local_target="$$target"; \
fi; \
(cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| eval $$failcom; \
done; \
if test "$$dot_seen" = "no"; then \
$(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
fi; test -z "$$fail"
.PHONY: install-html install-html-am install-html-recursive
install-html: install-html-recursive
install-html-recursive:
@failcom='exit 1'; \
for f in x $$MAKEFLAGS; do \
case $$f in \
*=* | --[!k]*);; \
*k*) failcom='fail=yes';; \
esac; \
done; \
dot_seen=no; \
target=`echo $@ | sed s/-recursive//`; \
list='$(SUBDIRS)'; for subdir in $$list; do \
echo "Making $$target in $$subdir"; \
if test "$$subdir" = "."; then \
dot_seen=yes; \
local_target="$$target-am"; \
else \
local_target="$$target"; \
fi; \
(cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| eval $$failcom; \
done; \
if test "$$dot_seen" = "no"; then \
$(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
fi; test -z "$$fail"
.PHONY: install-exec-local install-data-local
.PHONY: install-exec-bindir install-exec-tooldir

View file

@ -4825,6 +4825,8 @@ install-dvi-am:
install-exec-am: install-exec-local
install-html: install-html-recursive
install-html-am:
install-info: install-info-recursive
@ -4833,6 +4835,8 @@ install-info-am:
install-man:
install-pdf: install-pdf-recursive
install-pdf-am:
install-ps: install-ps-recursive
@ -5046,64 +5050,6 @@ cgen.o: cgen.c cgen.h cgen-desc.h subsegs.h \
$(srcdir)/../opcodes/$(CGEN_CPU_PREFIX)-desc.h \
$(srcdir)/../opcodes/$(CGEN_CPU_PREFIX)-opc.h
.PHONY: install-pdf install-pdf-am install-pdf-recursive
install-pdf: install-pdf-recursive
install-pdf-recursive:
@failcom='exit 1'; \
for f in x $$MAKEFLAGS; do \
case $$f in \
*=* | --[!k]*);; \
*k*) failcom='fail=yes';; \
esac; \
done; \
dot_seen=no; \
target=`echo $@ | sed s/-recursive//`; \
list='$(SUBDIRS)'; for subdir in $$list; do \
echo "Making $$target in $$subdir"; \
if test "$$subdir" = "."; then \
dot_seen=yes; \
local_target="$$target-am"; \
else \
local_target="$$target"; \
fi; \
(cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| eval $$failcom; \
done; \
if test "$$dot_seen" = "no"; then \
$(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
fi; test -z "$$fail"
.PHONY: install-html install-html-am install-html-recursive
install-html: install-html-recursive
install-html-recursive:
@failcom='exit 1'; \
for f in x $$MAKEFLAGS; do \
case $$f in \
*=* | --[!k]*);; \
*k*) failcom='fail=yes';; \
esac; \
done; \
dot_seen=no; \
target=`echo $@ | sed s/-recursive//`; \
list='$(SUBDIRS)'; for subdir in $$list; do \
echo "Making $$target in $$subdir"; \
if test "$$subdir" = "."; then \
dot_seen=yes; \
local_target="$$target-am"; \
else \
local_target="$$target"; \
fi; \
(cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| eval $$failcom; \
done; \
if test "$$dot_seen" = "no"; then \
$(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
fi; test -z "$$fail"
.PHONY: install-exec-local install-data-local
.PHONY: install-exec-bindir install-exec-tooldir

View file

@ -74,41 +74,6 @@ CPU_DOCS = \
# cygnus option.
install-data-local: install-info
pdf__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
install-pdf: install-pdf-am
install-pdf-am: $(PDFS)
@$(NORMAL_INSTALL)
test -z "$(pdfdir)" || $(mkinstalldirs) "$(DESTDIR)$(pdfdir)"
@list='$(PDFS)'; for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
f=$(pdf__strip_dir) \
echo " $(INSTALL_DATA) '$$d$$p' '$(DESTDIR)$(pdfdir)/$$f'"; \
$(INSTALL_DATA) "$$d$$p" "$(DESTDIR)$(pdfdir)/$$f"; \
done
html__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
install-html: install-html-am
install-html-am: $(HTMLS)
@$(NORMAL_INSTALL)
test -z "$(htmldir)" || $(mkdir_p) "$(DESTDIR)$(htmldir)"
@list='$(HTMLS)'; for p in $$list; do \
if test -f "$$p" || test -d "$$p"; then d=""; else d="$(srcdir)/"; fi; \
f=$(html__strip_dir) \
if test -d "$$d$$p"; then \
echo " $(mkdir_p) '$(DESTDIR)$(htmldir)/$$f'"; \
$(mkdir_p) "$(DESTDIR)$(htmldir)/$$f" || exit 1; \
echo " $(INSTALL_DATA) '$$d$$p'/* '$(DESTDIR)$(htmldir)/$$f'"; \
$(INSTALL_DATA) "$$d$$p"/* "$(DESTDIR)$(htmldir)/$$f"; \
else \
echo " $(INSTALL_DATA) '$$d$$p' '$(DESTDIR)$(htmldir)/$$f'"; \
$(INSTALL_DATA) "$$d$$p" "$(DESTDIR)$(htmldir)/$$f"; \
fi; \
done
# This one isn't ready for prime time yet. Not even a little bit.
noinst_TEXINFOS = internals.texi

View file

@ -308,8 +308,6 @@ CPU_DOCS = \
c-z80.texi \
c-z8k.texi
pdf__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
html__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
# This one isn't ready for prime time yet. Not even a little bit.
noinst_TEXINFOS = internals.texi
@ -618,6 +616,29 @@ install-dvi-am: $(DVIS)
done
install-exec-am:
install-html: install-html-am
install-html-am: $(HTMLS)
@$(NORMAL_INSTALL)
test -z "$(htmldir)" || $(MKDIR_P) "$(DESTDIR)$(htmldir)"
@list='$(HTMLS)'; list2=; test -n "$(htmldir)" || list=; \
for p in $$list; do \
if test -f "$$p" || test -d "$$p"; then d=; else d="$(srcdir)/"; fi; \
$(am__strip_dir) \
if test -d "$$d$$p"; then \
echo " $(MKDIR_P) '$(DESTDIR)$(htmldir)/$$f'"; \
$(MKDIR_P) "$(DESTDIR)$(htmldir)/$$f" || exit 1; \
echo " $(INSTALL_DATA) '$$d$$p'/* '$(DESTDIR)$(htmldir)/$$f'"; \
$(INSTALL_DATA) "$$d$$p"/* "$(DESTDIR)$(htmldir)/$$f" || exit $$?; \
else \
list2="$$list2 $$d$$p"; \
fi; \
done; \
test -z "$$list2" || { echo "$$list2" | $(am__base_list) | \
while read files; do \
echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(htmldir)'"; \
$(INSTALL_DATA) $$files "$(DESTDIR)$(htmldir)" || exit $$?; \
done; }
install-info: install-info-am
install-info-am: $(INFO_DEPS)
@ -653,6 +674,19 @@ install-info-am: $(INFO_DEPS)
else : ; fi
install-man: install-man1
install-pdf: install-pdf-am
install-pdf-am: $(PDFS)
@$(NORMAL_INSTALL)
test -z "$(pdfdir)" || $(MKDIR_P) "$(DESTDIR)$(pdfdir)"
@list='$(PDFS)'; test -n "$(pdfdir)" || list=; \
for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
echo "$$d$$p"; \
done | $(am__base_list) | \
while read files; do \
echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pdfdir)'"; \
$(INSTALL_DATA) $$files "$(DESTDIR)$(pdfdir)" || exit $$?; done
install-ps: install-ps-am
install-ps-am: $(PSS)
@ -718,37 +752,6 @@ asconfig.texi: $(CONFIG).texi
# cygnus option.
install-data-local: install-info
install-pdf: install-pdf-am
install-pdf-am: $(PDFS)
@$(NORMAL_INSTALL)
test -z "$(pdfdir)" || $(mkinstalldirs) "$(DESTDIR)$(pdfdir)"
@list='$(PDFS)'; for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
f=$(pdf__strip_dir) \
echo " $(INSTALL_DATA) '$$d$$p' '$(DESTDIR)$(pdfdir)/$$f'"; \
$(INSTALL_DATA) "$$d$$p" "$(DESTDIR)$(pdfdir)/$$f"; \
done
install-html: install-html-am
install-html-am: $(HTMLS)
@$(NORMAL_INSTALL)
test -z "$(htmldir)" || $(mkdir_p) "$(DESTDIR)$(htmldir)"
@list='$(HTMLS)'; for p in $$list; do \
if test -f "$$p" || test -d "$$p"; then d=""; else d="$(srcdir)/"; fi; \
f=$(html__strip_dir) \
if test -d "$$d$$p"; then \
echo " $(mkdir_p) '$(DESTDIR)$(htmldir)/$$f'"; \
$(mkdir_p) "$(DESTDIR)$(htmldir)/$$f" || exit 1; \
echo " $(INSTALL_DATA) '$$d$$p'/* '$(DESTDIR)$(htmldir)/$$f'"; \
$(INSTALL_DATA) "$$d$$p"/* "$(DESTDIR)$(htmldir)/$$f"; \
else \
echo " $(INSTALL_DATA) '$$d$$p' '$(DESTDIR)$(htmldir)/$$f'"; \
$(INSTALL_DATA) "$$d$$p" "$(DESTDIR)$(htmldir)/$$f"; \
fi; \
done
# Maintenance
# We need it for the taz target in ../../Makefile.in.

View file

@ -121,7 +121,7 @@ o If ``gdb/configure.ac'' is modified then you don't
``configure''.
The maintainer will re-generate those files
using autoconf (2.59 as of 2005-01-07).
using autoconf (2.64 as of 2009-08-22).
o If ``gdb/gdbarch.sh'' is modified, you don't

View file

@ -1,5 +1,11 @@
2009-08-22 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
* CONTRIBUTE: Bump documented Autoconf version.
* configure.ac: Do not substitute datarootdir, htmldir,
pdfdir, docdir. Do not process --with-datarootdir,
--with-htmldir, --with-pdfdir, --with-docdir.
* configure: Regenerate.
* aclocal.m4: Regenerate.
* config.in: Likewise.
* configure: Likewise.

50
gdb/configure vendored
View file

@ -912,10 +912,6 @@ with_tk
with_x
enable_sim
enable_multi_ice
with_datarootdir
with_docdir
with_pdfdir
with_htmldir
'
ac_precious_vars='build_alias
host_alias
@ -1608,10 +1604,6 @@ Optional Packages:
--with-tcl directory containing tcl configuration (tclConfig.sh)
--with-tk directory containing tk configuration (tkConfig.sh)
--with-x use the X Window System
--with-datarootdir use datarootdir as the data root directory.
--with-docdir install documentation in this directory.
--with-pdfdir install pdf in this directory.
--with-htmldir install html in this directory.
Some influential environment variables:
CC C compiler command
@ -14164,48 +14156,6 @@ ac_config_links="$ac_config_links $ac_config_links_1"
$as_echo "#define GDB_DEFAULT_HOST_CHARSET \"UTF-8\"" >>confdefs.h
# Flags needed to enable html installing and building
# Check whether --with-datarootdir was given.
if test "${with_datarootdir+set}" = set; then :
withval=$with_datarootdir; datarootdir="\${prefix}/${withval}"
else
datarootdir="\${prefix}/share"
fi
# Check whether --with-docdir was given.
if test "${with_docdir+set}" = set; then :
withval=$with_docdir; docdir="\${prefix}/${withval}"
else
docdir="\${datarootdir}/doc"
fi
# Check whether --with-pdfdir was given.
if test "${with_pdfdir+set}" = set; then :
withval=$with_pdfdir; pdfdir="\${prefix}/${withval}"
else
pdfdir="\${docdir}"
fi
# Check whether --with-htmldir was given.
if test "${with_htmldir+set}" = set; then :
withval=$with_htmldir; htmldir="\${prefix}/${withval}"
else
htmldir="\${docdir}"
fi
ac_config_files="$ac_config_files Makefile .gdbinit:gdbinit.in gnulib/Makefile"
ac_config_commands="$ac_config_commands default"

View file

@ -1917,32 +1917,6 @@ dnl At the moment, we just assume it's UTF-8.
AC_DEFINE(GDB_DEFAULT_HOST_CHARSET, "UTF-8",
[Define to be a string naming the default host character set.])
# Flags needed to enable html installing and building
AC_ARG_WITH(datarootdir,
AC_HELP_STRING([--with-datarootdir], [use datarootdir as the data root directory.]),
[datarootdir="\${prefix}/${withval}"],
[datarootdir="\${prefix}/share"])
AC_ARG_WITH(docdir,
AC_HELP_STRING([--with-docdir], [install documentation in this directory.]),
[docdir="\${prefix}/${withval}"],
[docdir="\${datarootdir}/doc"])
AC_ARG_WITH(pdfdir,
AC_HELP_STRING([--with-pdfdir], [install pdf in this directory.]),
[pdfdir="\${prefix}/${withval}"],
[pdfdir="\${docdir}"])
AC_ARG_WITH(htmldir,
AC_HELP_STRING([--with-htmldir], [install html in this directory.]),
[htmldir="\${prefix}/${withval}"],
[htmldir="\${docdir}"])
AC_SUBST(datarootdir)
AC_SUBST(docdir)
AC_SUBST(htmldir)
AC_SUBST(pdfdir)
AC_OUTPUT(Makefile .gdbinit:gdbinit.in gnulib/Makefile,
[
case x$CONFIG_HEADERS in

View file

@ -1,5 +1,12 @@
2009-08-22 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
* gdbint.texinfo (Releasing GDB): Point to
README-maintainer-mode file for required autoconf version.
* configure.ac: Do not substitute datarootdir, htmldir,
pdfdir, docdir. Do not process --with-datarootdir,
--with-htmldir, --with-pdfdir, --with-docdir.
* configure: Regenerate.
* configure: Regenerate.
2009-08-20 Reid Kleckner <reid@kleckner.net>

50
gdb/doc/configure vendored
View file

@ -601,10 +601,6 @@ SHELL'
ac_subst_files=''
ac_user_opts='
enable_option_checking
with_datarootdir
with_docdir
with_pdfdir
with_htmldir
with_pkgversion
with_bugurl
'
@ -1218,10 +1214,6 @@ if test -n "$ac_init_help"; then
Optional Packages:
--with-PACKAGE[=ARG] use PACKAGE [ARG=yes]
--without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no)
--with-datarootdir use datarootdir as the data root directory.
--with-docdir install documentation in this directory.
--with-pdfdir install pdf in this directory.
--with-htmldir install html in this directory.
--with-pkgversion=PKG Use PKG in the version string in place of "GDB"
--with-bugurl=URL Direct users to URL to report a bug
@ -1884,48 +1876,6 @@ $as_echo "no, using $LN_S" >&6; }
fi
# Flags needed to enable html installing and building
# Check whether --with-datarootdir was given.
if test "${with_datarootdir+set}" = set; then :
withval=$with_datarootdir; datarootdir="\${prefix}/${withval}"
else
datarootdir="\${prefix}/share"
fi
# Check whether --with-docdir was given.
if test "${with_docdir+set}" = set; then :
withval=$with_docdir; docdir="\${prefix}/${withval}"
else
docdir="\${datarootdir}/doc"
fi
# Check whether --with-pdfdir was given.
if test "${with_pdfdir+set}" = set; then :
withval=$with_pdfdir; pdfdir="\${prefix}/${withval}"
else
pdfdir="\${docdir}"
fi
# Check whether --with-htmldir was given.
if test "${with_htmldir+set}" = set; then :
withval=$with_htmldir; htmldir="\${prefix}/${withval}"
else
htmldir="\${docdir}"
fi
# Check whether --with-pkgversion was given.

View file

@ -4,32 +4,6 @@ sinclude(../../config/acx.m4)
AC_PROG_INSTALL
AC_PROG_LN_S
# Flags needed to enable html installing and building
AC_ARG_WITH(datarootdir,
AC_HELP_STRING([--with-datarootdir], [use datarootdir as the data root directory.]),
[datarootdir="\${prefix}/${withval}"],
[datarootdir="\${prefix}/share"])
AC_ARG_WITH(docdir,
AC_HELP_STRING([--with-docdir], [install documentation in this directory.]),
[docdir="\${prefix}/${withval}"],
[docdir="\${datarootdir}/doc"])
AC_ARG_WITH(pdfdir,
AC_HELP_STRING([--with-pdfdir], [install pdf in this directory.]),
[pdfdir="\${prefix}/${withval}"],
[pdfdir="\${docdir}"])
AC_ARG_WITH(htmldir,
AC_HELP_STRING([--with-htmldir], [install html in this directory.]),
[htmldir="\${prefix}/${withval}"],
[htmldir="\${docdir}"])
AC_SUBST(datarootdir)
AC_SUBST(docdir)
AC_SUBST(htmldir)
AC_SUBST(pdfdir)
ACX_PKGVERSION([GDB])
ACX_BUGURL([http://www.gnu.org/software/gdb/bugs/])
AC_OUTPUT(Makefile)

View file

@ -7078,10 +7078,9 @@ Notes:
@itemize @bullet
@item
Check the @code{autoconf} version carefully. You want to be using the
version taken from the @file{binutils} snapshot directory, which can be
found at @uref{ftp://sourceware.org/pub/binutils/}. It is very
unlikely that a system installed version of @code{autoconf} (e.g.,
@file{/usr/bin/autoconf}) is correct.
version documented in the toplevel @file{README-maintainer-mode} file.
It is very unlikely that a system installed version of @code{autoconf}
(e.g., @file{/usr/bin/autoconf}) is correct.
@end itemize
@subsubheading Check out the relevant modules:

View file

@ -1,5 +1,10 @@
2009-08-22 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
* Makefile.am (pdf__strip_dir, install-pdf, install-pdf-am)
(install-pdf-recursive, html__strip_dir, install-html)
(install-html-am, install-html-recursive): Remove.
* Makefile.in: Regenerate.
* Makefile.in: Regenerate.
* aclocal.m4: Likewise.
* configure: Likewise.

View file

@ -83,95 +83,6 @@ gprof.1: $(srcdir)/gprof.texi config.texi
(rm -f $@.T$$$$ && exit 1)
rm -f gprof.pod
.PHONY: install-pdf install-pdf-am install-pdf-recursive
pdf__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
install-pdf: install-pdf-recursive install-pdf-am
install-pdf-am: $(PDFS)
@$(NORMAL_INSTALL)
test -z "$(pdfdir)" || $(mkinstalldirs) "$(DESTDIR)$(pdfdir)"
@list='$(PDFS)'; for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
f=$(pdf__strip_dir) \
echo " $(INSTALL_DATA) '$$d$$p' '$(DESTDIR)$(pdfdir)/$$f'"; \
$(INSTALL_DATA) "$$d$$p" "$(DESTDIR)$(pdfdir)/$$f"; \
done
install-pdf-recursive:
@failcom='exit 1'; \
for f in x $$MAKEFLAGS; do \
case $$f in \
*=* | --[!k]*);; \
*k*) failcom='fail=yes';; \
esac; \
done; \
dot_seen=no; \
target=`echo $@ | sed s/-recursive//`; \
list='$(SUBDIRS)'; for subdir in $$list; do \
echo "Making $$target in $$subdir"; \
if test "$$subdir" = "."; then \
dot_seen=yes; \
local_target="$$target-am"; \
else \
local_target="$$target"; \
fi; \
(cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| eval $$failcom; \
done; \
if test "$$dot_seen" = "no"; then \
$(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
fi; test -z "$$fail"
.PHONY: install-html install-html-am install-html-recursive
html__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
install-html: install-html-recursive install-html-am
install-html-am: $(HTMLS)
@$(NORMAL_INSTALL)
test -z "$(htmldir)" || $(mkdir_p) "$(DESTDIR)$(htmldir)"
@list='$(HTMLS)'; for p in $$list; do \
if test -f "$$p" || test -d "$$p"; then d=""; else d="$(srcdir)/"; fi; \
f=$(html__strip_dir) \
if test -d "$$d$$p"; then \
echo " $(mkdir_p) '$(DESTDIR)$(htmldir)/$$f'"; \
$(mkdir_p) "$(DESTDIR)$(htmldir)/$$f" || exit 1; \
echo " $(INSTALL_DATA) '$$d$$p'/* '$(DESTDIR)$(htmldir)/$$f'"; \
$(INSTALL_DATA) "$$d$$p"/* "$(DESTDIR)$(htmldir)/$$f"; \
else \
echo " $(INSTALL_DATA) '$$d$$p' '$(DESTDIR)$(htmldir)/$$f'"; \
$(INSTALL_DATA) "$$d$$p" "$(DESTDIR)$(htmldir)/$$f"; \
fi; \
done
install-html-recursive:
@failcom='exit 1'; \
for f in x $$MAKEFLAGS; do \
case $$f in \
*=* | --[!k]*);; \
*k*) failcom='fail=yes';; \
esac; \
done; \
dot_seen=no; \
target=`echo $@ | sed s/-recursive//`; \
list='$(SUBDIRS)'; for subdir in $$list; do \
echo "Making $$target in $$subdir"; \
if test "$$subdir" = "."; then \
dot_seen=yes; \
local_target="$$target-am"; \
else \
local_target="$$target"; \
fi; \
(cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| eval $$failcom; \
done; \
if test "$$dot_seen" = "no"; then \
$(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
fi; test -z "$$fail"
# We want install to imply install-info as per GNU standards, despite the
# cygnus option.
install-data-local: install-info

View file

@ -310,8 +310,6 @@ gprof_TEXINFOS = config.texi
man_MANS = gprof.1
AM_MAKEINFOFLAGS = -I "$(srcdir)" -I "$(top_srcdir)/../bfd/doc" -I ../bfd/doc
TEXI2DVI = texi2dvi -I "$(srcdir)" -I "$(top_srcdir)/../bfd/doc" -I ../bfd/doc
pdf__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
html__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
CLEANFILES = dep.sed DEP DEPA DEP1 DEP2
MAINTAINERCLEANFILES = gprof.info
@ -841,6 +839,29 @@ install-dvi-am: $(DVIS)
done
install-exec-am: install-binPROGRAMS
install-html: install-html-recursive
install-html-am: $(HTMLS)
@$(NORMAL_INSTALL)
test -z "$(htmldir)" || $(MKDIR_P) "$(DESTDIR)$(htmldir)"
@list='$(HTMLS)'; list2=; test -n "$(htmldir)" || list=; \
for p in $$list; do \
if test -f "$$p" || test -d "$$p"; then d=; else d="$(srcdir)/"; fi; \
$(am__strip_dir) \
if test -d "$$d$$p"; then \
echo " $(MKDIR_P) '$(DESTDIR)$(htmldir)/$$f'"; \
$(MKDIR_P) "$(DESTDIR)$(htmldir)/$$f" || exit 1; \
echo " $(INSTALL_DATA) '$$d$$p'/* '$(DESTDIR)$(htmldir)/$$f'"; \
$(INSTALL_DATA) "$$d$$p"/* "$(DESTDIR)$(htmldir)/$$f" || exit $$?; \
else \
list2="$$list2 $$d$$p"; \
fi; \
done; \
test -z "$$list2" || { echo "$$list2" | $(am__base_list) | \
while read files; do \
echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(htmldir)'"; \
$(INSTALL_DATA) $$files "$(DESTDIR)$(htmldir)" || exit $$?; \
done; }
install-info: install-info-recursive
install-info-am: $(INFO_DEPS)
@ -876,6 +897,19 @@ install-info-am: $(INFO_DEPS)
else : ; fi
install-man: install-man1
install-pdf: install-pdf-recursive
install-pdf-am: $(PDFS)
@$(NORMAL_INSTALL)
test -z "$(pdfdir)" || $(MKDIR_P) "$(DESTDIR)$(pdfdir)"
@list='$(PDFS)'; test -n "$(pdfdir)" || list=; \
for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
echo "$$d$$p"; \
done | $(am__base_list) | \
while read files; do \
echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pdfdir)'"; \
$(INSTALL_DATA) $$files "$(DESTDIR)$(pdfdir)" || exit $$?; done
install-ps: install-ps-recursive
install-ps-am: $(PSS)
@ -970,91 +1004,6 @@ gprof.1: $(srcdir)/gprof.texi config.texi
(rm -f $@.T$$$$ && exit 1)
rm -f gprof.pod
.PHONY: install-pdf install-pdf-am install-pdf-recursive
install-pdf: install-pdf-recursive install-pdf-am
install-pdf-am: $(PDFS)
@$(NORMAL_INSTALL)
test -z "$(pdfdir)" || $(mkinstalldirs) "$(DESTDIR)$(pdfdir)"
@list='$(PDFS)'; for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
f=$(pdf__strip_dir) \
echo " $(INSTALL_DATA) '$$d$$p' '$(DESTDIR)$(pdfdir)/$$f'"; \
$(INSTALL_DATA) "$$d$$p" "$(DESTDIR)$(pdfdir)/$$f"; \
done
install-pdf-recursive:
@failcom='exit 1'; \
for f in x $$MAKEFLAGS; do \
case $$f in \
*=* | --[!k]*);; \
*k*) failcom='fail=yes';; \
esac; \
done; \
dot_seen=no; \
target=`echo $@ | sed s/-recursive//`; \
list='$(SUBDIRS)'; for subdir in $$list; do \
echo "Making $$target in $$subdir"; \
if test "$$subdir" = "."; then \
dot_seen=yes; \
local_target="$$target-am"; \
else \
local_target="$$target"; \
fi; \
(cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| eval $$failcom; \
done; \
if test "$$dot_seen" = "no"; then \
$(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
fi; test -z "$$fail"
.PHONY: install-html install-html-am install-html-recursive
install-html: install-html-recursive install-html-am
install-html-am: $(HTMLS)
@$(NORMAL_INSTALL)
test -z "$(htmldir)" || $(mkdir_p) "$(DESTDIR)$(htmldir)"
@list='$(HTMLS)'; for p in $$list; do \
if test -f "$$p" || test -d "$$p"; then d=""; else d="$(srcdir)/"; fi; \
f=$(html__strip_dir) \
if test -d "$$d$$p"; then \
echo " $(mkdir_p) '$(DESTDIR)$(htmldir)/$$f'"; \
$(mkdir_p) "$(DESTDIR)$(htmldir)/$$f" || exit 1; \
echo " $(INSTALL_DATA) '$$d$$p'/* '$(DESTDIR)$(htmldir)/$$f'"; \
$(INSTALL_DATA) "$$d$$p"/* "$(DESTDIR)$(htmldir)/$$f"; \
else \
echo " $(INSTALL_DATA) '$$d$$p' '$(DESTDIR)$(htmldir)/$$f'"; \
$(INSTALL_DATA) "$$d$$p" "$(DESTDIR)$(htmldir)/$$f"; \
fi; \
done
install-html-recursive:
@failcom='exit 1'; \
for f in x $$MAKEFLAGS; do \
case $$f in \
*=* | --[!k]*);; \
*k*) failcom='fail=yes';; \
esac; \
done; \
dot_seen=no; \
target=`echo $@ | sed s/-recursive//`; \
list='$(SUBDIRS)'; for subdir in $$list; do \
echo "Making $$target in $$subdir"; \
if test "$$subdir" = "."; then \
dot_seen=yes; \
local_target="$$target-am"; \
else \
local_target="$$target"; \
fi; \
(cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| eval $$failcom; \
done; \
if test "$$dot_seen" = "no"; then \
$(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
fi; test -z "$$fail"
# We want install to imply install-info as per GNU standards, despite the
# cygnus option.
install-data-local: install-info

View file

@ -1,5 +1,10 @@
2009-08-22 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
* Makefile.am (pdf__strip_dir, install-pdf, install-pdf-am)
(install-pdf-recursive, html__strip_dir, install-html)
(install-html-am, install-html-recursive): Remove.
* Makefile.in: Regenerate.
* Makefile.in: Regenerate.
* aclocal.m4: Likewise.
* config.in: Likewise.

View file

@ -1880,95 +1880,6 @@ mostlyclean-local:
-rm -rf tmpdir
CLEANFILES = dep.sed DEP DEPA DEP1 DEP2 spu_ovl.s spu_ovl.o spu_icache.s spu_icache.o
.PHONY: install-pdf install-pdf-am install-pdf-recursive
pdf__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
install-pdf: install-pdf-recursive install-pdf-am
install-pdf-am: $(PDFS)
@$(NORMAL_INSTALL)
test -z "$(pdfdir)" || $(mkinstalldirs) "$(DESTDIR)$(pdfdir)"
@list='$(PDFS)'; for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
f=$(pdf__strip_dir) \
echo " $(INSTALL_DATA) '$$d$$p' '$(DESTDIR)$(pdfdir)/$$f'"; \
$(INSTALL_DATA) "$$d$$p" "$(DESTDIR)$(pdfdir)/$$f"; \
done
install-pdf-recursive:
@failcom='exit 1'; \
for f in x $$MAKEFLAGS; do \
case $$f in \
*=* | --[!k]*);; \
*k*) failcom='fail=yes';; \
esac; \
done; \
dot_seen=no; \
target=`echo $@ | sed s/-recursive//`; \
list='$(SUBDIRS)'; for subdir in $$list; do \
echo "Making $$target in $$subdir"; \
if test "$$subdir" = "."; then \
dot_seen=yes; \
local_target="$$target-am"; \
else \
local_target="$$target"; \
fi; \
(cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| eval $$failcom; \
done; \
if test "$$dot_seen" = "no"; then \
$(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
fi; test -z "$$fail"
.PHONY: install-html install-html-am install-html-recursive
html__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
install-html: install-html-recursive install-html-am
install-html-am: $(HTMLS)
@$(NORMAL_INSTALL)
test -z "$(htmldir)" || $(mkdir_p) "$(DESTDIR)$(htmldir)"
@list='$(HTMLS)'; for p in $$list; do \
if test -f "$$p" || test -d "$$p"; then d=""; else d="$(srcdir)/"; fi; \
f=$(html__strip_dir) \
if test -d "$$d$$p"; then \
echo " $(mkdir_p) '$(DESTDIR)$(htmldir)/$$f'"; \
$(mkdir_p) "$(DESTDIR)$(htmldir)/$$f" || exit 1; \
echo " $(INSTALL_DATA) '$$d$$p'/* '$(DESTDIR)$(htmldir)/$$f'"; \
$(INSTALL_DATA) "$$d$$p"/* "$(DESTDIR)$(htmldir)/$$f"; \
else \
echo " $(INSTALL_DATA) '$$d$$p' '$(DESTDIR)$(htmldir)/$$f'"; \
$(INSTALL_DATA) "$$d$$p" "$(DESTDIR)$(htmldir)/$$f"; \
fi; \
done
install-html-recursive:
@failcom='exit 1'; \
for f in x $$MAKEFLAGS; do \
case $$f in \
*=* | --[!k]*);; \
*k*) failcom='fail=yes';; \
esac; \
done; \
dot_seen=no; \
target=`echo $@ | sed s/-recursive//`; \
list='$(SUBDIRS)'; for subdir in $$list; do \
echo "Making $$target in $$subdir"; \
if test "$$subdir" = "."; then \
dot_seen=yes; \
local_target="$$target-am"; \
else \
local_target="$$target"; \
fi; \
(cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| eval $$failcom; \
done; \
if test "$$dot_seen" = "no"; then \
$(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
fi; test -z "$$fail"
.PHONY: install-exec-local install-data-local
install-exec-local: ld-new$(EXEEXT)

View file

@ -769,8 +769,6 @@ MOSTLYCLEANFILES = $(STAGESTUFF) ld1$(EXEEXT) ld2$(EXEEXT) ld3$(EXEEXT) \
ldemul-list.h crtbegin.o crtend.o ld.log ld.sum
CLEANFILES = dep.sed DEP DEPA DEP1 DEP2 spu_ovl.s spu_ovl.o spu_icache.s spu_icache.o
pdf__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
html__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
# Stuff that should be included in a distribution. The diststuff
# target is run by the taz target in ../Makefile.in.
@ -1311,6 +1309,29 @@ install-dvi-am: $(DVIS)
done
install-exec-am: install-exec-local
install-html: install-html-recursive
install-html-am: $(HTMLS)
@$(NORMAL_INSTALL)
test -z "$(htmldir)" || $(MKDIR_P) "$(DESTDIR)$(htmldir)"
@list='$(HTMLS)'; list2=; test -n "$(htmldir)" || list=; \
for p in $$list; do \
if test -f "$$p" || test -d "$$p"; then d=; else d="$(srcdir)/"; fi; \
$(am__strip_dir) \
if test -d "$$d$$p"; then \
echo " $(MKDIR_P) '$(DESTDIR)$(htmldir)/$$f'"; \
$(MKDIR_P) "$(DESTDIR)$(htmldir)/$$f" || exit 1; \
echo " $(INSTALL_DATA) '$$d$$p'/* '$(DESTDIR)$(htmldir)/$$f'"; \
$(INSTALL_DATA) "$$d$$p"/* "$(DESTDIR)$(htmldir)/$$f" || exit $$?; \
else \
list2="$$list2 $$d$$p"; \
fi; \
done; \
test -z "$$list2" || { echo "$$list2" | $(am__base_list) | \
while read files; do \
echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(htmldir)'"; \
$(INSTALL_DATA) $$files "$(DESTDIR)$(htmldir)" || exit $$?; \
done; }
install-info: install-info-recursive
install-info-am: $(INFO_DEPS)
@ -1346,6 +1367,19 @@ install-info-am: $(INFO_DEPS)
else : ; fi
install-man: install-man1
install-pdf: install-pdf-recursive
install-pdf-am: $(PDFS)
@$(NORMAL_INSTALL)
test -z "$(pdfdir)" || $(MKDIR_P) "$(DESTDIR)$(pdfdir)"
@list='$(PDFS)'; test -n "$(pdfdir)" || list=; \
for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
echo "$$d$$p"; \
done | $(am__base_list) | \
while read files; do \
echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pdfdir)'"; \
$(INSTALL_DATA) $$files "$(DESTDIR)$(pdfdir)" || exit $$?; done
install-ps: install-ps-recursive
install-ps-am: $(PSS)
@ -2800,91 +2834,6 @@ ld.1: $(srcdir)/ld.texinfo configdoc.texi
mostlyclean-local:
-rm -rf tmpdir
.PHONY: install-pdf install-pdf-am install-pdf-recursive
install-pdf: install-pdf-recursive install-pdf-am
install-pdf-am: $(PDFS)
@$(NORMAL_INSTALL)
test -z "$(pdfdir)" || $(mkinstalldirs) "$(DESTDIR)$(pdfdir)"
@list='$(PDFS)'; for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
f=$(pdf__strip_dir) \
echo " $(INSTALL_DATA) '$$d$$p' '$(DESTDIR)$(pdfdir)/$$f'"; \
$(INSTALL_DATA) "$$d$$p" "$(DESTDIR)$(pdfdir)/$$f"; \
done
install-pdf-recursive:
@failcom='exit 1'; \
for f in x $$MAKEFLAGS; do \
case $$f in \
*=* | --[!k]*);; \
*k*) failcom='fail=yes';; \
esac; \
done; \
dot_seen=no; \
target=`echo $@ | sed s/-recursive//`; \
list='$(SUBDIRS)'; for subdir in $$list; do \
echo "Making $$target in $$subdir"; \
if test "$$subdir" = "."; then \
dot_seen=yes; \
local_target="$$target-am"; \
else \
local_target="$$target"; \
fi; \
(cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| eval $$failcom; \
done; \
if test "$$dot_seen" = "no"; then \
$(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
fi; test -z "$$fail"
.PHONY: install-html install-html-am install-html-recursive
install-html: install-html-recursive install-html-am
install-html-am: $(HTMLS)
@$(NORMAL_INSTALL)
test -z "$(htmldir)" || $(mkdir_p) "$(DESTDIR)$(htmldir)"
@list='$(HTMLS)'; for p in $$list; do \
if test -f "$$p" || test -d "$$p"; then d=""; else d="$(srcdir)/"; fi; \
f=$(html__strip_dir) \
if test -d "$$d$$p"; then \
echo " $(mkdir_p) '$(DESTDIR)$(htmldir)/$$f'"; \
$(mkdir_p) "$(DESTDIR)$(htmldir)/$$f" || exit 1; \
echo " $(INSTALL_DATA) '$$d$$p'/* '$(DESTDIR)$(htmldir)/$$f'"; \
$(INSTALL_DATA) "$$d$$p"/* "$(DESTDIR)$(htmldir)/$$f"; \
else \
echo " $(INSTALL_DATA) '$$d$$p' '$(DESTDIR)$(htmldir)/$$f'"; \
$(INSTALL_DATA) "$$d$$p" "$(DESTDIR)$(htmldir)/$$f"; \
fi; \
done
install-html-recursive:
@failcom='exit 1'; \
for f in x $$MAKEFLAGS; do \
case $$f in \
*=* | --[!k]*);; \
*k*) failcom='fail=yes';; \
esac; \
done; \
dot_seen=no; \
target=`echo $@ | sed s/-recursive//`; \
list='$(SUBDIRS)'; for subdir in $$list; do \
echo "Making $$target in $$subdir"; \
if test "$$subdir" = "."; then \
dot_seen=yes; \
local_target="$$target-am"; \
else \
local_target="$$target"; \
fi; \
(cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| eval $$failcom; \
done; \
if test "$$dot_seen" = "no"; then \
$(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
fi; test -z "$$fail"
.PHONY: install-exec-local install-data-local
install-exec-local: ld-new$(EXEEXT)

View file

@ -1,5 +1,8 @@
2009-08-22 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
* Makefile.am (install-pdf, install-html): Remove.
* Makefile.in: Regenerate.
* Makefile.in: Regenerate.
* aclocal.m4: Likewise.
* config.in: Likewise.

View file

@ -16,12 +16,6 @@ AM_CFLAGS = $(WARN_CFLAGS)
bfdlibdir = @bfdlibdir@
bfdincludedir = @bfdincludedir@
.PHONY: install-pdf
install-pdf:
.PHONY: install-html
install-html:
bfdlib_LTLIBRARIES = libopcodes.la
# This is where bfd.h lives.

View file

@ -995,6 +995,8 @@ install-dvi-am:
install-exec-am:
install-html: install-html-recursive
install-html-am:
install-info: install-info-recursive
@ -1003,6 +1005,8 @@ install-info-am:
install-man:
install-pdf: install-pdf-recursive
install-pdf-am:
install-ps: install-ps-recursive
@ -1053,12 +1057,6 @@ uninstall-am: uninstall-bfdlibLTLIBRARIES
uninstall-bfdlibLTLIBRARIES
.PHONY: install-pdf
install-pdf:
.PHONY: install-html
install-html:
disassemble.lo: disassemble.c $(INCDIR)/dis-asm.h
$(LIBTOOL) --mode=compile $(COMPILE) -c @archdefs@ $(srcdir)/disassemble.c