This does most of the mechanical removal. IOW, the easy part.
This doesn't touch procfs.c as that'd be a harder excision,
potentially affecting Solaris.
mips-tdep.c is left alone. E.g., I didn't delete the GDB_OSABI_IRIX
enum value, nor references to it in mips-tdep.c. Some comments
mentioning IRIX ABIs may still be relevant and I wouldn't know what to
do with them. in That can always be done on a separate pass,
preferably by someone who can test on MIPS.
I didn't remove a reference to IRIX in testsuite/lib/future.exp, as I
believe that code is imported from DejaGNU.
Built and tested on x86_64 Fedora 20, with --enable-targets=all.
Tested that building for --target=mips-sgi-irix6 on x86_64 Fedora 20
fails with:
checking for default auto-load directory... $debugdir:$datadir/auto-load
checking for default auto-load safe-path... $debugdir:$datadir/auto-load
*** Configuration mips-sgi-irix6 is obsolete.
*** Support has been REMOVED.
make[1]: *** [configure-gdb] Error 1
make[1]: Leaving directory `/home/pedro/gdb/mygit/build-irix'
make: *** [all] Error 2
gdb/
2014-10-10 Pedro Alves <palves@redhat.com>
* Makefile.in (ALL_TARGET_OBS): Remove mips-irix-tdep.o and solib-irix.o.
(ALLDEPFILES): Remove mips-irix-tdep.c and solib-irix.c.
(HFILES_NO_SRCDIR): Remove solib-irix.h.
* NEWS: Mention that support for mips-sgi-irix5* mips-sgi-irix6*
and been removed.
* config/mips/irix5.mh, config/mips/irix6.mh: Delete files.
* configure.ac: Remove references to IRIX.
* configure.host: Add *-*-irix* to the obsolete hosts section.
Remove all other references to irix.
* irix5-nat.c, mips-irix-tdep.c, solib-irix.c, solib-irix.h:
Delete files.
gdb/testsuite/
2014-10-10 Pedro Alves <palves@redhat.com>
* gdb.base/bigcore.exp: Remove references to IRIX.
* gdb.base/funcargs.exp: Likewise.
* gdb.base/interrupt.exp: Likewise.
* gdb.base/mips_pro.exp: Likewise.
* gdb.base/nodebug.exp: Likewise.
* gdb.base/setvar.exp: Likewise.
* lib/gdb.exp (gdb_compile_shlib): Remove mips-sgi-irix* case.
Don't reset the exit code at inferior exit and print it in
-list-thread-groups.
gdb/ChangeLog:
* NEWS: Announce new exit-code field in -list-thread-groups
output.
* inferior.c (exit_inferior_1): Don't clear exit code.
(inferior_appeared): Clear exit code.
* mi/mi-main.c (print_one_inferior): Add printing of the exit
code.
gdb/testsuite/ChangeLog:
* gdb.mi/mi-exit-code.exp: New file.
* gdb.mi/mi-exit-code.c: New file.
gdb/doc/ChangeLog:
* gdb.texinfo (Miscellaneous gdb/mi Commands): Document new
exit-code field in -list-thread-groups output.
By default, GDB removes all breakpoints from the target when the
target stops and the prompt is given back to the user. This is useful
in case GDB crashes while the user is interacting, as otherwise,
there's a higher chance breakpoints would be left planted on the
target.
But, as long as any thread is running free, we need to make sure to
keep breakpoints inserted, lest a thread misses a breakpoint. With
that in mind, in preparation for non-stop mode, we added a "breakpoint
always-inserted on" mode. This traded off the extra crash protection
for never having threads miss breakpoints, and in addition is more
efficient if there's a ton of breakpoints to remove/insert at each
user command (e.g., at each "step").
When we added non-stop mode, and for a period, we required users to
manually set "always-inserted on" when they enabled non-stop mode, as
otherwise GDB removes all breakpoints from the target as soon as any
thread stops, which means the other threads still running will miss
breakpoints. The test added by this patch exercises this.
That soon revealed a nuisance, and so later we added an extra
"breakpoint always-inserted auto" mode, that made GDB behave like
"always-inserted on" when non-stop was enabled, and "always-inserted
off" when non-stop was disabled. "auto" was made the default at the
same time.
In hindsight, this "auto" setting was unnecessary, and not the ideal
solution. Non-stop mode does depends on breakpoints always-inserted
mode, but only as long as any thread is running. If no thread is
running, no breakpoint can be missed. The same is true for all-stop
too. E.g., if, in all-stop mode, and the user does:
(gdb) c&
(gdb) b foo
That breakpoint at "foo" should be inserted immediately, but it
currently isn't -- currently it'll end up inserted only if the target
happens to trip on some event, and is re-resumed, e.g., an internal
breakpoint triggers that doesn't cause a user-visible stop, and so we
end up in keep_going calling insert_breakpoints. The test added by
this patch also covers this.
IOW, no matter whether in non-stop or all-stop, if the target fully
stops, we can remove breakpoints. And no matter whether in all-stop
or non-stop, if any thread is running in the target, then we need
breakpoints to be immediately inserted. And then, if the target has
global breakpoints, we need to keep breakpoints even when the target
is stopped.
So with that in mind, and aiming at reducing all-stop vs non-stop
differences for all-stop-on-stop-of-non-stop, this patch fixes
"breakpoint always-inserted off" to not remove breakpoints from the
target until it fully stops, and then removes the "auto" setting as
unnecessary. I propose removing it straight away rather than keeping
it as an alias, unless someone complains they have scripts that need
it and that can't adjust.
Tested on x86_64 Fedora 20.
gdb/
2014-09-22 Pedro Alves <palves@redhat.com>
* NEWS: Mention merge of "breakpoint always-inserted" modes "off"
and "auto" merged.
* breakpoint.c (enum ugll_insert_mode): New enum.
(always_inserted_mode): Now a plain boolean.
(show_always_inserted_mode): No longer handle AUTO_BOOLEAN_AUTO.
(breakpoints_always_inserted_mode): Delete.
(breakpoints_should_be_inserted_now): New function.
(insert_breakpoints): Pass UGLL_INSERT to
update_global_location_list instead of calling
insert_breakpoint_locations manually.
(create_solib_event_breakpoint_1): New, factored out from ...
(create_solib_event_breakpoint): ... this.
(create_and_insert_solib_event_breakpoint): Use
create_solib_event_breakpoint_1 instead of calling
insert_breakpoint_locations manually.
(update_global_location_list): Change parameter type from boolean
to enum ugll_insert_mode. All callers adjusted. Adjust to use
breakpoints_should_be_inserted_now and handle UGLL_INSERT.
(update_global_location_list_nothrow): Change parameter type from
boolean to enum ugll_insert_mode.
(_initialize_breakpoint): "breakpoint always-inserted" option is
now a boolean command. Update help text.
* breakpoint.h (breakpoints_always_inserted_mode): Delete declaration.
(breakpoints_should_be_inserted_now): New declaration.
* infrun.c (handle_inferior_event) <TARGET_WAITKIND_LOADED>:
Remove breakpoints_always_inserted_mode check.
(normal_stop): Adjust to use breakpoints_should_be_inserted_now.
* remote.c (remote_start_remote): Likewise.
gdb/doc/
2014-09-22 Pedro Alves <palves@redhat.com>
* gdb.texinfo (Set Breaks): Document that "set breakpoint
always-inserted off" is the default mode now. Delete
documentation of "set breakpoint always-inserted auto".
gdb/testsuite/
2014-09-22 Pedro Alves <palves@redhat.com>
* gdb.threads/break-while-running.exp: New file.
* gdb.threads/break-while-running.c: New file.
If I want to change the signalled state of multiple threads
it's a bit cumbersome to do with the "signal" command.
What you really want is a way to set the signal state of the
desired threads and then just do "continue".
This patch adds a new command, queue-signal, to accomplish this.
Basically "signal N" == "queue-signal N" + "continue".
That's not precisely true in that "signal" can be used to inject
any signal, including signals set to "nopass"; whereas "queue-signal"
just queues the signal as if the thread stopped because of it.
"nopass" handling is done when the thread is resumed which
"queue-signal" doesn't do.
One could add extra complexity to allow queue-signal to be used to
deliver "nopass" signals like the "signal" command. I have no current
need for it so in the interests of incremental complexity, I have
left such support out and just have the code flag an error if one
tries to queue a nopass signal.
gdb/ChangeLog:
* NEWS: Mention new "queue-signal" command.
* infcmd.c (queue_signal_command): New function.
(_initialize_infcmd): Add new queue-signal command.
gdb/doc/ChangeLog:
* gdb.texinfo (Signaling): Document new queue-signal command.
gdb/testsuite/ChangeLog:
* gdb.threads/queue-signal.c: New file.
* gdb.threads/queue-signal.exp: New file.
The ability to read registers is needed to use Frame Filter API to
display the frames created by JIT compilers.
gdb/ChangeLog:
2014-08-29 Sasha Smundak <asmundak@google.com>
* python/py-frame.c (frapy_read_register): New function.
gdb/doc/ChangeLog:
2014-08-26 Sasha Smundak <asmundak@google.com>
* python.texi (Frames in Python): Add read_register description.
gdb/testsuite/ChangeLog:
2014-08-26 Sasha Smundak <asmundak@google.com>
* gdb.python/py-frame.exp: Test Frame.read_register.
Currently, GDB can pass a signal to the wrong thread in several
different but related scenarios.
E.g., if thread 1 stops for signal SIGFOO, the user switches to thread
2, and then issues "continue", SIGFOO is actually delivered to thread
2, not thread 1. This obviously messes up programs that use
pthread_kill to send signals to specific threads.
This has been a known issue for a long while. Back in 2008 when I
made stop_signal be per-thread (2020b7ab), I kept the behavior -- see
code in 'proceed' being removed -- wanting to come back to it later.
The time has finally come now.
The patch fixes this -- on resumption, intercepted signals are always
delivered to the thread that had intercepted them.
Another example: if thread 1 stops for a breakpoint, the user switches
to thread 2, and then issues "signal SIGFOO", SIGFOO is actually
delivered to thread 1, not thread 2, because 'proceed' first switches
to thread 1 to step over its breakpoint... If the user deletes the
breakpoint before issuing "signal FOO", then the signal is delivered
to thread 2 (the current thread).
"signal SIGFOO" can be used for two things: inject a signal in the
program while the program/thread had stopped for none, bypassing
"handle nopass"; or changing/suppressing a signal the program had
stopped for. These scenarios are really two faces of the same coin,
and GDB can't really guess what the user is trying to do. GDB might
have intercepted signals in more than one thread even (see the new
signal-command-multiple-signals-pending.exp test). At least in the
inject case, it's obviously clear to me that the user means to deliver
the signal to the currently selected thread, so best is to make the
command's behavior consistent and easy to explain.
Then, if the user is trying to suppress/change a signal the program
had stopped for instead of injecting a new signal, but, the user had
changed threads meanwhile, then she will be surprised that with:
(gdb) continue
Thread 1 stopped for signal SIGFOO.
(gdb) thread 2
(gdb) signal SIGBAR
... GDB actually delivers SIGFOO to thread 1, and SIGBAR to thread 2
(with scheduler-locking off, which is the default, because then
"signal" or any other resumption command resumes all threads).
So the patch makes GDB detect that, and ask for confirmation:
(gdb) thread 1
[Switching to thread 1 (Thread 10979)]
(gdb) signal SIGUSR2
Note:
Thread 3 previously stopped with signal SIGUSR2, User defined signal 2.
Thread 2 previously stopped with signal SIGUSR1, User defined signal 1.
Continuing thread 1 (the current thread) with specified signal will
still deliver the signals noted above to their respective threads.
Continue anyway? (y or n)
All these scenarios are covered by the new tests.
Tested on x86_64 Fedora 20, native and gdbserver.
gdb/
2014-07-25 Pedro Alves <palves@redhat.com>
* NEWS: Mention signal passing and "signal" command changes.
* gdbthread.h (struct thread_suspend_state) <stop_signal>: Extend
comment.
* breakpoint.c (until_break_command): Adjust clear_proceed_status
call.
* infcall.c (run_inferior_call): Adjust clear_proceed_status call.
* infcmd.c (proceed_thread_callback, continue_1, step_once)
(jump_command): Adjust clear_proceed_status call.
(signal_command): Warn if other thread that are resumed have
signals that will be delivered. Adjust clear_proceed_status call.
(until_next_command, finish_command)
(proceed_after_attach_callback, attach_command_post_wait)
(attach_command): Adjust clear_proceed_status call.
* infrun.c (proceed_after_vfork_done): Likewise.
(proceed_after_attach_callback): Adjust comment.
(clear_proceed_status_thread): Clear stop_signal if not in pass
state.
(clear_proceed_status_callback): Delete.
(clear_proceed_status): New 'step' parameter. Only clear the
proceed status of threads the command being prepared is about to
resume.
(proceed): If passed in an explicit signal, override stop_signal
with it. Don't pass the last stop signal to the thread we're
resuming.
(init_wait_for_inferior): Adjust clear_proceed_status call.
(switch_back_to_stepped_thread): Clear the signal if it should not
be passed.
* infrun.h (clear_proceed_status): New 'step' parameter.
(user_visible_resume_ptid): Add comment.
* linux-nat.c (linux_nat_resume_callback): Don't check whether the
signal is in pass state.
* remote.c (append_pending_thread_resumptions): Likewise.
* mi/mi-main.c (proceed_thread): Adjust clear_proceed_status call.
gdb/doc/
2014-07-25 Pedro Alves <palves@redhat.com>
Eli Zaretskii <eliz@gnu.org>
* gdb.texinfo (Signaling) <signal command>: Explain what happens
with multi-threaded programs.
gdb/testsuite/
2014-07-25 Pedro Alves <palves@redhat.com>
* gdb.threads/signal-command-handle-nopass.c: New file.
* gdb.threads/signal-command-handle-nopass.exp: New file.
* gdb.threads/signal-command-multiple-signals-pending.c: New file.
* gdb.threads/signal-command-multiple-signals-pending.exp: New file.
* gdb.threads/signal-delivered-right-thread.c: New file.
* gdb.threads/signal-delivered-right-thread.exp: New file.
* NEWS (Python Scripting): Add entry about the new xmethods
feature.
doc/
* python.texi (Xmethods In Python, XMethod API)
(Writing an Xmethod): New nodes.
(Python API): New menu entries "Xmethods In Python",
"Xmethod API", "Writing an Xmethod".
This finally makes background execution commands possible by default.
However, in order to do that, there's one last thing we need to do --
we need to separate the MI and target notions of "async". Unlike the
CLI, where the user explicitly requests foreground vs background
execution in the execution command itself (c vs c&), MI chose to treat
"set target-async" specially -- setting it changes the default
behavior of execution commands.
So, we can't simply "set target-async" default to on, as that would
affect MI frontends. Instead we have to make the setting MI-specific,
and teach MI about sync commands on top of an async target.
Because the "target" word in "set target-async" ends up as a potential
source of confusion, the patch adds a "set mi-async" option, and makes
"set target-async" a deprecated alias.
Rather than make the targets always async, this patch introduces a new
"maint set target-async" option so that the GDB developer can control
whether the target is async. This makes it simpler to debug issues
arising only in the synchronous mode; important because sync mode
seems unlikely to go away.
Unlike in previous revisions, "set target-async" does not affect this
new maint parameter. The rationale for this is that then one can
easily run the test suite in the "maint set target-async off" mode and
have tests that enable mi-async fail just like they fail on
non-async-capable targets. This emulation is exactly the point of the
maint option.
I had asked Tom in a previous iteration to split the actual change of
the target async default to a separate patch, but it turns out that
that is quite awkward in this version of the patch, because with MI
async and target async decoupled (unlike in previous versions), if we
don't flip the default at the same time, then just "set target-async
on" alone never actually manages to do anything. It's best to not
have that transitory state in the tree.
Given "set target-async on" now only has effect for MI, the patch goes
through the testsuite removing it from non-MI tests. MI tests are
adjusted to use the new and less confusing "mi-async" spelling.
2014-05-29 Pedro Alves <palves@redhat.com>
Tom Tromey <tromey@redhat.com>
* NEWS: Mention "maint set target-async", "set mi-async", and that
background execution commands are now always available.
* target.h (target_async_permitted): Update comment.
* target.c (target_async_permitted, target_async_permitted_1):
Default to 1.
(set_target_async_command): Rename to ...
(maint_set_target_async_command): ... this.
(show_target_async_command): Rename to ...
(maint_show_target_async_command): ... this.
(_initialize_target): Adjust.
* infcmd.c (prepare_execution_command): Make extern.
* inferior.h (prepare_execution_command): Declare.
* infrun.c (set_observer_mode): Leave target async alone.
* mi/mi-interp.c (mi_interpreter_init): Install
mi_on_sync_execution_done as sync_execution_done observer.
(mi_on_sync_execution_done): New function.
(mi_execute_command_input_handler): Don't print the prompt if we
just started a synchronous command with an async target.
(mi_on_resume): Check sync_execution before printing prompt.
* mi/mi-main.h (mi_async_p): Declare.
* mi/mi-main.c: Include gdbcmd.h.
(mi_async_p): New function.
(mi_async, mi_async_1): New globals.
(set_mi_async_command, show_mi_async_command, mi_async): New
functions.
(exec_continue): Call prepare_execution_command.
(run_one_inferior, mi_cmd_exec_run, mi_cmd_list_target_features)
(mi_execute_async_cli_command): Use mi_async_p.
(_initialize_mi_main): Install "set mi-async". Make
"target-async" a deprecated alias.
2014-05-29 Pedro Alves <palves@redhat.com>
Tom Tromey <tromey@redhat.com>
* gdb.texinfo (Non-Stop Mode): Remove "set target-async 1"
from example.
(Asynchronous and non-stop modes): Document '-gdb-set mi-async'.
Mention that target-async is now deprecated.
(Maintenance Commands): Document maint set/show target-async.
2014-05-29 Pedro Alves <palves@redhat.com>
Tom Tromey <tromey@redhat.com>
* gdb.base/async-shell.exp: Don't enable target-async.
* gdb.base/async.exp
* gdb.base/corefile.exp (corefile_test_attach): Remove 'async'
parameter. Adjust.
(top level): Don't test with "target-async".
* gdb.base/dprintf-non-stop.exp: Don't enable target-async.
* gdb.base/gdb-sigterm.exp: Don't test with "target-async".
* gdb.base/inferior-died.exp: Don't enable target-async.
* gdb.base/interrupt-noterm.exp: Likewise.
* gdb.mi/mi-async.exp: Use "mi-async" instead of "target-async".
* gdb.mi/mi-nonstop-exit.exp: Likewise.
* gdb.mi/mi-nonstop.exp: Likewise.
* gdb.mi/mi-ns-stale-regcache.exp: Likewise.
* gdb.mi/mi-nsintrall.exp: Likewise.
* gdb.mi/mi-nsmoribund.exp: Likewise.
* gdb.mi/mi-nsthrexec.exp: Likewise.
* gdb.mi/mi-watch-nonstop.exp: Likewise.
* gdb.multi/watchpoint-multi.exp: Adjust comment.
* gdb.python/py-evsignal.exp: Don't enable target-async.
* gdb.python/py-evthreads.exp: Likewise.
* gdb.python/py-prompt.exp: Likewise.
* gdb.reverse/break-precsave.exp: Don't test with "target-async".
* gdb.server/solib-list.exp: Don't enable target-async.
* gdb.threads/thread-specific-bp.exp: Likewise.
* lib/mi-support.exp: Adjust to use mi-async.
This patch removes support for the "set/show remotebaud" command,
which were deprecated in GDB 7.7, and should be now be removed
ahead of cutting the GDB 7.8 branch.
gdb/ChangeLog:
* serial.c (_initialize_serial): Remove support for
the "set remotebaud" and "show remotebaud" commands.
* NEWS: Add entry documenting the removal of that command.
gdb/testsuite/ChangeLog:
* config/monitor.exp (gdb_target_monitor): Replace use of
"set remotebaud" by "set serial baud".
The btrace record target does not trace data. We therefore do not allow
accessing read-write memory during replay.
In some cases, this might be useful to advanced users, though, who we assume
to know what they are doing.
Add a set|show command pair to turn this memory access restriction off.
* record-btrace.c (record_btrace_allow_memory_access): Remove.
(replay_memory_access_read_only, replay_memory_access_read_write)
(replay_memory_access_types, replay_memory_access)
(set_record_btrace_cmdlist, show_record_btrace_cmdlist)
(cmd_set_record_btrace, cmd_show_record_btrace)
(cmd_show_replay_memory_access): New.
(record_btrace_xfer_partial, record_btrace_insert_breakpoint)
(record_btrace_remove_breakpoint): Replace
record_btrace_allow_memory_access with replay_memory_access.
(_initialize_record_btrace): Add commands.
* NEWS: Announce it.
testsuite/
* gdb.btrace/data.exp: Test it.
doc/
* gdb.texinfo (Process Record and Replay): Document it.
Sometimes it's useful to be able to disable the automatic connection
to the native target. E.g., sometimes GDB disconnects from the
extended-remote target I was debugging, without me noticing it, and
then I do "run". That starts the program locally, and only after a
little head scratch session do I figure out the program is running
locally instead of remotely as intended. Same thing with "attach",
"info os", etc.
With the patch, we now can have this instead:
(gdb) set auto-connect-native-target off
(gdb) target extended-remote :9999
...
*gdb disconnects*
(gdb) run
Don't know how to run. Try "help target".
To still be able to connect to the native target with
auto-connect-native-target set to off, I've made "target native" work
instead of erroring out as today.
Before:
(gdb) target native
Use the "run" command to start a native process.
After:
(gdb) target native
Done. Use the "run" command to start a process.
(gdb) maint print target-stack
The current target stack is:
- native (Native process)
- exec (Local exec file)
- None (None)
(gdb) run
Starting program: ./a.out
...
I've also wanted this for the testsuite, when running against the
native-extended-gdbserver.exp board (runs against gdbserver in
extended-remote mode). With a non-native-target board, it's always a
bug to launch a program with the native target. Turns out we still
have one such case this patch catches:
(gdb) break main
Breakpoint 1 at 0x4009e5: file ../../../src/gdb/testsuite/gdb.base/coremaker.c, line 138.
(gdb) run
Don't know how to run. Try "help target".
(gdb) FAIL: gdb.base/corefile.exp: run: with core
On the patch itself, probably the least obvious bit is the need to go
through all targets, and move the unpush_target call to after the
generic_mourn_inferior call instead of before. This is what
inf-ptrace.c does too, ever since multi-process support was added.
The reason inf-ptrace.c does things in that order is that in the
current multi-process/single-target model, we shouldn't unpush the
target if there are still other live inferiors being debugged. The
check for that is "have_inferiors ()" (a misnomer nowadays...), which
does:
have_inferiors (void)
{
for (inf = inferior_list; inf; inf = inf->next)
if (inf->pid != 0)
return 1;
It's generic_mourn_inferior that ends up clearing inf->pid, so we need
to call it before the have_inferiors check. To make all native
targets behave the same WRT to explicit "target native", I've added an
inf_child_maybe_unpush_target function that targets call instead of
calling unpush_target directly, and as that includes the
have_inferiors check, I needed to adjust the targets.
Tested on x86_64 Fedora 20, native, and also with the
extended-gdbserver board.
Confirmed a cross build of djgpp gdb still builds.
Smoke tested a cross build of Windows gdb under Wine.
Untested otherwise.
gdb/
2014-05-21 Pedro Alves <palves@redhat.com>
* inf-child.c (inf_child_ops, inf_child_explicitly_opened): New
globals.
(inf_child_open_target): New function.
(inf_child_open): Use inf_child_open_target to push the target
instead of erroring out.
(inf_child_disconnect, inf_child_close)
(inf_child_maybe_unpush_target): New functions.
(inf_child_target): Install inf_child_disconnect and
inf_child_close. Store a pointer to the returned object.
* inf-child.h (inf_child_open_target, inf_child_maybe_unpush): New
declarations.
* target.c (auto_connect_native_target): New global.
(show_default_run_target): New function.
(find_default_run_target): Return NULL if automatically connecting
to the native target is disabled.
(_initialize_target): Install set/show auto-connect-native-target.
* NEWS: Mention "set auto-connect-native-target", and "target
native".
* linux-nat.c (super_close): New global.
(linux_nat_close): Call super_close.
(linux_nat_add_target): Store a pointer to the base class's
to_close method.
* inf-ptrace.c (inf_ptrace_mourn_inferior, inf_ptrace_detach): Use
inf_child_maybe_unpush.
* inf-ttrace.c (inf_ttrace_him): Don't push the target if it is
already pushed.
(inf_ttrace_mourn_inferior): Only unpush the target after mourning
the inferior. Use inf_child_maybe_unpush_target.
(inf_ttrace_attach): Don't push the target if it is already
pushed.
(inf_ttrace_detach): Use inf_child_maybe_unpush_target.
* darwin-nat.c (darwin_mourn_inferior): Only unpush the target
after mourning the inferior. Use inf_child_maybe_unpush_target.
(darwin_attach_pid): Don't push the target if it is already
pushed.
* gnu-nat.c (gnu_mourn_inferior): Only unpush the target after
mourning the inferior. Use inf_child_maybe_unpush_target.
(gnu_detach): Use inf_child_maybe_unpush_target.
* go32-nat.c (go32_create_inferior): Don't push the target if it
is already pushed.
(go32_mourn_inferior): Use inf_child_maybe_unpush_target.
* nto-procfs.c (procfs_is_nto_target): Adjust comment.
(procfs_open): Rename to ...
(procfs_open_1): ... this. Add target_ops parameter. Adjust
comments. Can target_preopen before changing node. Call
inf_child_open_target to push the target explicitly.
(procfs_attach): Don't push the target if it is already pushed.
(procfs_detach): Use inf_child_maybe_unpush_target.
(procfs_create_inferior): Don't push the target if it is already
pushed.
(nto_native_ops): New global.
(procfs_open): Reimplement.
(procfs_native_open): New function.
(init_procfs_targets): Install procfs_native_open as to_open of
"target native". Store a pointer to the "native" target in
nto_native_ops.
* procfs.c (procfs_attach): Don't push the target if it is already
pushed.
(procfs_detach): Use inf_child_maybe_unpush_target.
(procfs_mourn_inferior): Only unpush the target after mourning the
inferior. Use inf_child_maybe_unpush_target.
(procfs_init_inferior): Don't push the target if it is already
pushed.
* windows-nat.c (do_initial_windows_stuff): Don't push the target
if it is already pushed.
(windows_detach): Use inf_child_maybe_unpush_target.
(windows_mourn_inferior): Only unpush the target after mourning
the inferior. Use inf_child_maybe_unpush_target.
gdb/doc/
2014-05-21 Pedro Alves <palves@redhat.com>
* gdb.texinfo (Starting): Document "set/show
auto-connect-native-target".
(Target Commands): Document "target native".
gdb/testsuite/
2014-05-21 Pedro Alves <palves@redhat.com>
* boards/gdbserver-base.exp (GDBFLAGS): Set to "set
auto-connect-native-target off".
* gdb.base/auto-connect-native-target.c: New file.
* gdb.base/auto-connect-native-target.exp: New file.
gdb/
2014-05-21 Pedro Alves <palves@redhat.com>
* NEWS: Mention that the "child", "GNU, "djgpp", "darwin-child"
and "procfs" targets are now called "native" instead.
This does two things:
1. Adds a test.
Recently compare-sections got a new "-r" switch, but given no test
existed for compare-sections, the patch was allowed in with no
testsuite addition. This now adds a test for both compare-sections
and compare-sections -r.
2. Makes the compare-sections command work against all targets.
Currently, compare-sections only works with remote targets, and only
those that support the qCRC packet. The patch makes it so that if the
target doesn't support accelerating memory verification, then GDB
falls back to comparing memory itself. This is of course slower, but
it's better than nothing, IMO. While testing against extended-remote
GDBserver I noticed that we send the qCRC request to the target if
we're connected, but not yet running a program. That can't work of
course -- the patch fixes that. This all also goes in the direction
of bridging the local/remote parity gap.
I didn't decouple 1. from 2., because that would mean that the test
would need to handle the case of the target not supporting the
command.
Tested on x86_64 Fedora 17, native, remote GDBserver, and
extended-remote GDBserver. I also hack-disabled qCRC support to make
sure the fallback paths in remote.c work.
gdb/doc/
2014-05-20 Pedro Alves <palves@redhat.com>
* gdb.texinfo (Memory) <compare-sections>: Generalize comments to
not be remote specific. Add cross reference to the qCRC packet.
(Separate Debug Files): Update cross reference to the qCRC packet.
(General Query Packets) <qCRC packet>: Add anchor.
gdb/
2014-05-20 Pedro Alves <palves@redhat.com>
* NEWS: Mention that compare-sections now works with all targets.
* remote.c (PACKET_qCRC): New enum value.
(remote_verify_memory): Don't send qCRC if the target has no
execution. Use packet_support/packet_ok. If the target doesn't
support the qCRC packet, fallback to a deep memory copy.
(compare_sections_command): Say "target image" instead of "remote
executable".
(_initialize_remote): Add PACKET_qCRC to the list of config
packets that have no associated command. Extend comment.
* target.c (simple_verify_memory, default_verify_memory): New
function.
* target.h (struct target_ops) <to_verify_memory>: Default to
default_verify_memory.
(simple_verify_memory): New declaration.
* target-delegates.c: Regenerate.
gdb/testsuite/
2014-05-20 Pedro Alves <palves@redhat.com>
* gdb.base/compare-sections.c: New file.
* gdb.base/compare-sections.exp: New file.
This patch adds support for the Intel(R) Advanced Vector
Extensions 512 (Intel(R) AVX-512) registers. Native and remote
debugging are covered by this patch.
Intel(R) AVX-512 is an extension to AVX to support 512-bit wide
SIMD registers in 64-bit mode (XMM0-XMM31, YMM0-YMM31, ZMM0-ZMM31).
The number of available registers in 32-bit mode is still 8
(XMM0-7, YMM0-7, ZMM0-7). The lower 256-bits of the ZMM registers
are aliased to the respective 256-bit YMM registers. The lower
128-bits are aliased to the respective 128-bit XMM registers.
There are also 8 new, dedicated mask registers (K0-K7) in both 32-bit
mode and 64-bit mode.
For more information please see
Intel(R) Developer Zone: Intel(R) AVX
http://software.intel.com/en-us/intel-isa-extensions#pid-16007-1495
Intel(R) Architecture Instruction Set Extensions Programming Reference:
http://software.intel.com/en-us/file/319433-017pdf
2014-04-24 Michael Sturm <michael.sturm@mintel.com>
Walfred Tedeschi <walfred.tedeschi@intel.com>
* amd64-linux-nat.c (amd64_linux_gregset32_reg_offset): Add
AVX512 registers.
(amd64_linux_read_description): Add code to handle AVX512 xstate
mask and return respective tdesc.
* amd64-linux-tdep.c: Include features/i386/amd64-avx512-linux.c
and features/i386/x32-avx512-linux.c.
(amd64_linux_gregset_reg_offset): Add AVX512 registers.
(amd64_linux_core_read_description): Add code to handle AVX512
xstate mask and return respective tdesc.
(_initialize_amd64_linux_tdep): Initialize AVX512 tdesc.
* amd64-linux-tdep.h (AMD64_LINUX_ORIG_RAX_REGNUM): Adjust regnum
calculation.
(AMD64_LINUX_NUM_REGS): Adjust to new number of registers.
(tdesc_amd64_avx512_linux): New prototype.
(tdesc_x32_avx512_linux): Likewise.
* amd64-tdep.c: Include features/i386/amd64-avx512.c and
features/i386/x32-avx512.c.
(amd64_ymm_avx512_names): New register names for pseudo
registers YMM16-31.
(amd64_ymmh_avx512_names): New register names for raw registers
YMMH16-31.
(amd64_k_names): New register names for K registers.
(amd64_zmmh_names): New register names for ZMM raw registers.
(amd64_zmm_names): New registers names for ZMM pseudo registers.
(amd64_xmm_avx512_names): New register names for XMM16-31
registers.
(amd64_pseudo_register_name): Add code to return AVX512 pseudo
registers.
(amd64_init_abi): Add code to intitialize AVX512 tdep variables
if feature is present.
(_initialize_amd64_tdep): Call AVX512 tdesc initializers.
* amd64-tdep.h (enum amd64_regnum): Add AVX512 registers.
(AMD64_NUM_REGS): Adjust to new number of registers.
* i386-linux-nat.c (GETXSTATEREGS_SUPPLIES): Extend range of
registers supplied via XSTATE by AVX512 registers.
(i386_linux_read_description): Add case for AVX512.
* i386-linux-tdep.c: Include i386-avx512-linux.c.
(i386_linux_gregset_reg_offset): Add AVX512 registers.
(i386_linux_core_read_description): Add case for AVX512.
(i386_linux_init_abi): Install supported register note section
for AVX512.
(_initialize_i386_linux_tdep): Add call to tdesc init function for
AVX512.
* i386-linux-tdep.h (I386_LINUX_NUM_REGS): Set number of
registers to be number of zmm7h + 1.
(tdesc_i386_avx512_linux): Add tdesc for AVX512 registers.
* i386-tdep.c: Include features/i386/i386-avx512.c.
(i386_zmm_names): Add ZMM pseudo register names array.
(i386_zmmh_names): Add ZMM raw register names array.
(i386_k_names): Add K raw register names array.
(num_lower_zmm_regs): Add constant for the number of lower ZMM
registers. AVX512 has 16 more ZMM registers than there are YMM
registers.
(i386_zmmh_regnum_p): Add function to look up register number of
ZMM raw registers.
(i386_zmm_regnum_p): Likewise for ZMM pseudo registers.
(i386_k_regnum_p): Likewise for K raw registers.
(i386_ymmh_avx512_regnum_p): Likewise for additional YMM raw
registers added by AVX512.
(i386_ymm_avx512_regnum_p): Likewise for additional YMM pseudo
registers added by AVX512.
(i386_xmm_avx512_regnum_p): Likewise for additional XMM registers
added by AVX512.
(i386_register_name): Add code to hide YMMH16-31 and ZMMH0-31.
(i386_pseudo_register_name): Add ZMM pseudo registers.
(i386_zmm_type): Construct and return vector registers type for ZMM
registers.
(i386_pseudo_register_type): Return appropriate type for YMM16-31,
ZMM0-31 pseudo registers and K registers.
(i386_pseudo_register_read_into_value): Add code to read K, ZMM
and YMM16-31 registers from register cache.
(i386_pseudo_register_write): Add code to write K, ZMM and
YMM16-31 registers.
(i386_register_reggroup_p): Add code to include/exclude AVX512
registers in/from respective register groups.
(i386_validate_tdesc_p): Handle AVX512 feature, add AVX512
registers if feature is present in xcr0.
(i386_gdbarch_init): Add code to initialize AVX512 feature
variables in tdep structure, wire in pseudo registers and call
initialize_tdesc_i386_avx512.
* i386-tdep.h (struct gdbarch_tdep): Add AVX512 related
variables.
(i386_regnum): Add AVX512 registers.
(I386_SSE_NUM_REGS): New define for number of SSE registers.
(I386_AVX_NUM_REGS): Likewise for AVX registers.
(I386_AVX512_NUM_REGS): Likewise for AVX512 registers.
(I386_MAX_REGISTER_SIZE): Change to 64 bytes, ZMM registers are
512 bits wide.
(i386_xmm_avx512_regnum_p): New prototype for register look up.
(i386_ymm_avx512_regnum_p): Likewise.
(i386_k_regnum_p): Likewise.
(i386_zmm_regnum_p): Likewise.
(i386_zmmh_regnum_p): Likewise.
* i387-tdep.c : Update year in copyright notice.
(xsave_ymm_avx512_offset): New table for YMM16-31 offsets in
XSAVE buffer.
(XSAVE_YMM_AVX512_ADDR): New macro.
(xsave_xmm_avx512_offset): New table for XMM16-31 offsets in
XSAVE buffer.
(XSAVE_XMM_AVX512_ADDR): New macro.
(xsave_avx512_k_offset): New table for K register offsets in
XSAVE buffer.
(XSAVE_AVX512_K_ADDR): New macro.
(xsave_avx512_zmm_h_offset): New table for ZMM register offsets
in XSAVE buffer.
(XSAVE_AVX512_ZMM_H_ADDR): New macro.
(i387_supply_xsave): Add code to supply AVX512 registers to XSAVE
buffer.
(i387_collect_xsave): Add code to collect AVX512 registers from
XSAVE buffer.
* i387-tdep.h (I387_NUM_XMM_AVX512_REGS): New define for number
of XMM16-31 registers.
(I387_NUM_K_REGS): New define for number of K registers.
(I387_K0_REGNUM): New define for K0 register number.
(I387_NUM_ZMMH_REGS): New define for number of ZMMH registers.
(I387_ZMM0H_REGNUM): New define for ZMM0H register number.
(I387_NUM_YMM_AVX512_REGS): New define for number of YMM16-31
registers.
(I387_YMM16H_REGNUM): New define for YMM16H register number.
(I387_XMM16_REGNUM): New define for XMM16 register number.
(I387_YMM0_REGNUM): New define for YMM0 register number.
(I387_KEND_REGNUM): New define for last K register number.
(I387_ZMMENDH_REGNUM): New define for last ZMMH register number.
(I387_YMMH_AVX512_END_REGNUM): New define for YMM31 register
number.
(I387_XMM_AVX512_END_REGNUM): New define for XMM31 register
number.
* common/i386-xstate.h: Add AVX 3.1 feature bits, mask and XSTATE
size.
* features/Makefile: Add AVX512 related files.
* features/i386/32bit-avx512.xml: New file.
* features/i386/64bit-avx512.xml: Likewise.
* features/i386/amd64-avx512-linux.c: Likewise.
* features/i386/amd64-avx512-linux.xml: Likewise.
* features/i386/amd64-avx512.c: Likewise.
* features/i386/amd64-avx512.xml: Likewise.
* features/i386/i386-avx512-linux.c: Likewise.
* features/i386/i386-avx512-linux.xml: Likewise.
* features/i386/i386-avx512.c: Likewise.
* features/i386/i386-avx512.xml: Likewise.
* features/i386/x32-avx512-linux.c: Likewise.
* features/i386/x32-avx512-linux.xml: Likewise.
* features/i386/x32-avx512.c: Likewise.
* features/i386/x32-avx512.xml: Likewise.
* regformats/i386/amd64-avx512-linux.dat: New file.
* regformats/i386/amd64-avx512.dat: Likewise.
* regformats/i386/i386-avx512-linux.dat: Likewise.
* regformats/i386/i386-avx512.dat: Likewise.
* regformats/i386/x32-avx512-linux.dat: Likewise.
* regformats/i386/x32-avx512.dat: Likewise.
* NEWS: Add note about new support for AVX512.
testsuite/
* Makefile.in (EXECUTABLES): Added i386-avx512.
* gdb.arch/i386-avx512.c: New file.
* gdb.arch/i386-avx512.exp: Likewise.
gdbserver/
* Makefile.in: Added rules to handle new files
i386-avx512.c i386-avx512-linux.c amd64-avx512.c
amd64-avx512-linux.c x32-avx512.c x32-avx512-linux.c.
* configure.srv (srv_i386_regobj): Add i386-avx512.o.
(srv_i386_linux_regobj): Add i386-avx512-linux.o.
(srv_amd64_regobj): Add amd64-avx512.o and x32-avx512.o.
(srv_amd64_linux_regobj): Add amd64-avx512-linux.o and
x32-avx512-linux.o.
(srv_i386_32bit_xmlfiles): Add i386/32bit-avx512.xml.
(srv_i386_64bit_xmlfiles): Add i386/64bit-avx512.xml.
(srv_amd64_xmlfiles): Add i386/amd64-avx512.xml and
i386/x32-avx512.xml.
(srv_i386_linux_xmlfiles): Add i386/i386-avx512-linux.xml.
(srv_amd64_linux_xmlfiles): Add i386/amd64-avx512-linux.xml and
i386/x32-avx512-linux.xml.
* i387-fp.c (num_avx512_k_registers): New constant for number
of K registers.
(num_avx512_zmmh_low_registers): New constant for number of
lower ZMM registers (0-15).
(num_avx512_zmmh_high_registers): New constant for number of
higher ZMM registers (16-31).
(num_avx512_ymmh_registers): New contant for number of higher
YMM registers (ymm16-31 added by avx521 on x86_64).
(num_avx512_xmm_registers): New constant for number of higher
XMM registers (xmm16-31 added by AVX512 on x86_64).
(struct i387_xsave): Add space for AVX512 registers.
(i387_cache_to_xsave): Change raw buffer size to 64 characters.
Add code to handle AVX512 registers.
(i387_xsave_to_cache): Add code to handle AVX512 registers.
* linux-x86-low.c (init_registers_amd64_avx512_linux): New
prototypei from generated file.
(tdesc_amd64_avx512_linux): Likewise.
(init_registers_x32_avx512_linux): Likewise.
(tdesc_x32_avx512_linux): Likewise.
(init_registers_i386_avx512_linux): Likewise.
(tdesc_i386_avx512_linux): Likewise.
(x86_64_regmap): Add AVX512 registers.
(x86_linux_read_description): Add code to handle AVX512 XSTATE
mask.
(initialize_low_arch): Add code to initialize AVX512 registers.
doc/
* gdb.texinfo (i386 Features): Add description of AVX512
registers.
Change-Id: Ifc4c08c76b85dbec18d02efdbe6182e851584438
Signed-off-by: Michael Sturm <michael.sturm@intel.com>
* NEWS: Mention it.
* solib.c (solib_read_symbols): Only print symbol loading messages
if requested.
(solib_add): If symbol loading is in "brief" mode, notify user
symbols are being loaded.
(reload_shared_libraries_1): Ditto.
* symfile.c (print_symbol_loading_off): New static global.
(print_symbol_loading_brief): New static global.
(print_symbol_loading_full): New static global.
(print_symbol_loading_enums): New static global.
(print_symbol_loading): New static global.
(print_symbol_loading_p): New function.
(symbol_file_add_with_addrs): Only print symbol loading messages
if requested.
(_initialize_symfile): Register "print symbol-loading" set/show
command.
* symfile.h (print_symbol_loading_p): Declare.
doc/
* gdb.texinfo (Symbols): Document set/show print symbol-loading.
testsuite/
* gdb.base/print-symbol-loading-lib.c: New file.
* gdb.base/print-symbol-loading-main.c: New file.
* gdb.base/print-symbol-loading.exp: New file.
The "dll-symbols" command, specific to native Windows platforms,
gives the impression that the symbols were not loaded, first
because it completes silently, and second because the "info shared"
output does not get updated after the command completes:
(gdb) dll-symbols C:\WINDOWS\syswow64\rpcrt4.dll
(gdb) info shared
From To Syms Read Shared Object Library
[...]
0x77e51000 0x77ee2554 No C:\WINDOWS\system32\rpcrt4.dll
(we exected the "Syms Read" column to read "Yes").
As far as I can tell, the symbols actually do get loaded, but completely
independently from the solib framework, which explains the silent
loading and the fact that the "Syms Read" column does not get updated.
See windows-nat.c::safe_symbol_file_add_stub, which calls symbol_file_add
instead of calling solib_add.
But, aside from the fact that the "Syms Read" status does not get
updated, I also noticed that it does not take into account the DLL's
actual load address when loading its symbols. As a result, I believe
that we get it wrong if the DLL does not get loaded at the prefered
address.
Rather than trying to fix this command, there does not seem to be
a reason other than historical for having Windows-specific commands
which essentially re-implements the "sharedlibrary" command. The
command interface is slightly different (the latter takes a regexp
rather than a plain filename), but it should be just as easy to use
the "sharedlibrary" command, or its "share" alias, as usisng the
"dll-symbols" command. For instance:
(gdb) share rpcrt4.dll
Reading symbols from C:\WINDOWS\system32\rpcrt4.dll...(no debugging symbols found)...done.
Loaded symbols for C:\WINDOWS\system32\rpcrt4.dll
(gdb) info shared
From To Syms Read Shared Object Library
[...]
0x77e51000 0x77ee2554 Yes (*) C:\WINDOWS\system32\rpcrt4.dll
This patch therefore deprecates the "dll-symbols" command, as well
as its two aliases "add-shared-symbol-files" and "assf", with a view
of deleting them as soon as the 7.8 branch gets cut.
gdb/ChangeLog:
* windows-nat.c (_initialize_windows_nat): Deprecate the
"dll-symbols" command. Turn the "add-shared-symbol-files"
and "assf" aliases into commands, and deprecate them as well.
* NEWS: Add entry explaining that "dll-symbols" and its two
aliases are now deprecated.
gdb/doc/ChangeLog:
* gdb.texinfo (Files): Document "add-shared-symbol-files"
and "assf" as being deprecated.
(Cygwin Native): Likewise for "dll-symbols".
(Non-debug DLL Symbols): Remove reference to "dll-symbols"
as a way to force the loading of symbols from a DLL.
* NEWS: Add entry for the new feature
* python/py-value.c (valpy_binop): Call value_x_binop for struct
and class values.
testsuite/
* gdb.python/py-value-cc.cc: Improve test case to enable testing
operations on gdb.Value objects.
* gdb.python/py-value-cc.exp: Add new test to test operations on
gdb.Value objects.
doc/
* python.texi (Values From Inferior): Add description about the
new feature.
Currently, Ada debugging requires the use of certain GNAT-specific
encodings, which are generated by the compiler. These encodings
were created a long time ago to work around the fairly limited
capabilities of the stabs debugging format. With DWARF, the vast
majority of the encodings could be abandoned in favor of a pure
DWARF approach.
In order to make it easier to evaluate the quality of the DWARF
debugging information generated by the compiler, and how the debugger
handles it, we are introducing a small Ada-specific maintenance
setting which changes the debugger's behavior to ignore descriptive
types. Descriptive types are artificial types generated by the
compiler purely to give the debugger hints as to how to properly
decode certain properties of a type. For instance, for array
types, it generates a parallel type whose name is the name of
the array suffixed with ___XA, whose contents tells us what
the array's index type is, and possibly its bounds. See GCC's
gcc/ada/exp_dbug.ads for the full description of all encodings.
This is only a first step, as this setting does not deactivate
all encodings; More settings dedicated to each type of encoding
will likely be implemented in the future, as we make progress.
gdb/ChangeLog:
* ada-lang.c (maint_set_ada_cmdlist, maint_show_ada_cmdlist):
New static globals.
(maint_set_ada_cmd, maint_show_ada_cmd): New functions.
(ada_ignore_descriptive_types_p): New static global.
(find_parallel_type_by_descriptive_type): Return immediately
if ada_ignore_descriptive_types_p is set.
(_initialize_ada_language): Register new commands "maintenance
set ada", "maintenance show ada", "maintenance set ada
ignore-descriptive-types" and "maintenance show ada
ignore-descriptive-types".
* NEWS: Add entry for new "maint ada set/show
ignore-descriptive-types" commands.
gdb/doc/ChangeLog:
* gdb.texinfo (Ada Glitches): Document the new "maint ada set/show
ignore-descriptive-types". commands.
* syscalls/s390x-linux.xml: New file.
* syscalls/s390-linux.xml: New file.
* s390-linux-tdep.c (XML_SYSCALL_FILENAME_S390): New macro.
(XML_SYSCALL_FILENAME_S390X): Likewise.
(op_svc): New enum value for SVC opcode.
(s390_sigtramp_frame_sniffer): Replace literal by 'op_svc'.
(s390_linux_get_syscall_number): New function.
(s390_gdbarch_init): Register '*get_syscall_number' and the
syscall xml file name.
* data-directory/Makefile.in (SYSCALLS_FILES): Add
"s390-linux.xml" and "s390x-linux.xml".
* NEWS: Announce new feature.
gdb/testsuite/ChangeLog:
* gdb.base/catch-syscall.exp: Activate test on s390*-linux.
Provide to_resume and to_wait target methods for the btrace record target
to allow reverse stepping and replay support.
Replay is limited in the sense that only stepping and source correlation
are supported. We do not record data and thus can not show variables.
Non-stop mode is not working. Do not allow record-btrace in non-stop mode.
2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
* btrace.h (btrace_thread_flag): New.
(struct btrace_thread_info) <flags>: New.
* record-btrace.c (record_btrace_resume_thread)
(record_btrace_find_thread_to_move, btrace_step_no_history)
(btrace_step_stopped, record_btrace_start_replaying)
(record_btrace_step_thread, record_btrace_decr_pc_after_break)
(record_btrace_find_resume_thread): New.
(record_btrace_resume, record_btrace_wait): Extend.
(record_btrace_can_execute_reverse): New.
(record_btrace_open): Fail in non-stop mode.
(record_btrace_set_replay): Split into this, ...
(record_btrace_stop_replaying): ... this, ...
(record_btrace_clear_histories): ... and this.
(init_record_btrace_ops): Init to_can_execute_reverse.
* NEWS: Announce it.
testsuite/
* gdb.btrace/delta.exp: Check reverse stepi.
* gdb.btrace/tailcall.exp: Update. Add stepping tests.
* gdb.btrace/finish.exp: New.
* gdb.btrace/next.exp: New.
* gdb.btrace/nexti.exp: New.
* gdb.btrace/record_goto.c: Add comments.
* gdb.btrace/step.exp: New.
* gdb.btrace/stepi.exp: New.
* gdb.btrace/multi-thread-step.c: New.
* gdb.btrace/multi-thread-step.exp: New.
* gdb.btrace/rn-dl-bind.c: New.
* gdb.btrace/rn-dl-bind.exp: New.
* gdb.btrace/data.c: New.
* gdb.btrace/data.exp: New.
* gdb.btrace/Makefile.in (EXECUTABLES): Add new.
doc/
* gdb.texinfo: Document limited reverse/replay support
for target record-btrace.
Read branch trace data incrementally and extend the current trace rather than
discarding it and reading the entire trace buffer each time.
If the branch trace buffer overflowed, we can't extend the current trace so we
discard it and start anew by reading the entire branch trace buffer.
2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
* common/linux-btrace.c (perf_event_read_bts, linux_read_btrace):
Support delta reads.
(linux_disable_btrace): Change return type.
* common/linux-btrace.h (linux_read_btrace): Change parameters
and return type to allow error reporting. Update users.
(linux_disable_btrace): Change return type. Update users.
* common/btrace-common.h (btrace_read_type) <BTRACE_READ_DELTA>:
New.
(btrace_error): New.
(btrace_block) <begin>: Comment on BEGIN == 0.
* btrace.c (btrace_compute_ftrace): Start from the end of
the current trace.
(btrace_stitch_trace, btrace_clear_history): New.
(btrace_fetch): Read delta trace, return if replaying.
(btrace_clear): Move clear history code to btrace_clear_history.
(parse_xml_btrace): Throw an error if parsing failed.
* target.h (struct target_ops) <to_read_btrace>: Change parameters
and return type to allow error reporting.
(target_read_btrace): Change parameters and return type to allow
error reporting.
* target.c (target_read_btrace): Update.
* remote.c (remote_read_btrace): Support delta reads. Pass
errors on.
* NEWS: Announce it.
gdbserver/
* target.h (target_ops) <read_btrace>: Change parameters and
return type to allow error reporting.
* server.c (handle_qxfer_btrace): Support delta reads. Pass
trace reading errors on.
* linux-low.c (linux_low_read_btrace): Pass trace reading
errors on.
(linux_low_disable_btrace): New.
Extend the always failing unwinder to provide the PC based on the call
structure detected in the branch trace.
The unwinder supports normal frames and tailcall frames.
Inline frames are not supported.
2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
* record.h (record_btrace_frame_unwind)
(record_btrace_tailcall_frame_unwind): New declarations.
* dwarf2-frame: Include record.h
(dwarf2_frame_cfa): Throw an error for btrace frames.
* record-btrace.c: Include hashtab.h.
(btrace_get_bfun_name): New.
(btrace_call_history): Call btrace_get_bfun_name.
(struct btrace_frame_cache): New.
(bfcache): New.
(bfcache_hash, bfcache_eq, bfcache_new): New.
(btrace_get_frame_function): New.
(record_btrace_frame_unwind_stop_reason): Allow unwinding.
(record_btrace_frame_this_id): Compute own id.
(record_btrace_frame_prev_register): Provide PC, throw_error
for all other registers.
(record_btrace_frame_sniffer): Detect btrace frames.
(record_btrace_tailcall_frame_sniffer): New.
(record_btrace_frame_dealloc_cache): New.
(record_btrace_frame_unwind): Add new functions.
(record_btrace_tailcall_frame_unwind): New.
(_initialize_record_btrace): Allocate cache.
* btrace.c (btrace_clear): Call reinit_frame_cache.
* NEWS: Announce it.
testsuite/
* gdb.btrace/record_goto.exp: Add backtrace test.
* gdb.btrace/tailcall.exp: Add backtrace test.
The "record function-call-history" and "record instruction-history" commands
accept a range "begin, end". End is not included in both cases. Include it.
2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
* record-btrace.c (record_btrace_insn_history_range): Include
end.
(record_btrace_insn_history_from): Adjust range.
(record_btrace_call_history_range): Include
end.
(record_btrace_call_history_from): Adjust range.
* NEWS: Announce changes.
testsuite/
* gdb.btrace/function_call_history.exp: Update tests.
* gdb.btrace/instruction_history.exp: Update tests.
doc/
* gdb.texinfo (Process Record and Replay): Update documentation.
Add a new modifier /c to the "record function-call-history" command to
indent the function name based on its depth in the call stack.
Also reorder the optional fields to have the indentation at the very beginning.
Prefix the insn range (/i modifier) with "inst ".
Prefix the source line (/l modifier) with "at ".
Change the range syntax from "begin-end" to "begin,end" to allow copy&paste to
the "record instruction-history" and "list" commands.
Adjust the respective tests and add new tests for the /c modifier.
2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
* record.h (enum record_print_flag)
<record_print_indent_calls>: New.
* record.c (get_call_history_modifiers): Recognize /c modifier.
(_initialize_record): Document /c modifier.
* record-btrace.c (btrace_call_history): Add btinfo parameter.
Reorder fields. Optionally indent the function name. Update
all users.
* NEWS: Announce changes.
testsuite/
* gdb.btrace/function_call_history.exp: Fix expected field
order for "record function-call-history".
Add new tests for "record function-call-history /c".
* gdb.btrace/exception.cc: New.
* gdb.btrace/exception.exp: New.
* gdb.btrace/tailcall.exp: New.
* gdb.btrace/x86-tailcall.S: New.
* gdb.btrace/x86-tailcall.c: New.
* gdb.btrace/unknown_functions.c: New.
* gdb.btrace/unknown_functions.exp: New.
* gdb.btrace/Makefile.in (EXECUTABLES): Add new.
doc/
* gdb.texinfo (Process Record and Replay): Document new /c
modifier accepted by "record function-call-history".
Add /i modifier to "record function-call-history" example.
The record instruction-history and record-function-call-history commands start
counting instructions at zero. This is somewhat unintuitive when we start
navigating in the recorded instruction history. Start at one, instead.
2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
* btrace.c (ftrace_new_function): Start counting at one.
* record-btrace.c (record_btrace_info): Adjust number of calls
and insns.
* NEWS: Announce it.
testsuite/
* gdb.btrace/instruction_history.exp: Update.
* gdb.btrace/function_call_history.exp: Update.
This patch adds a news entry about improvements in record-replay and
reverse debugging support for arm*-linux* targets.
gdb/ChangeLog:
2014-01-15 Omair Javaid <omair.javaid@linaro.org>
* NEWS: Add note on improved process record-replay on
arm*-linux* targets.
Consider the following declarations:
typedef long our_time_t;
our_time_t current_time = 1384395743;
The purpose of this patch is to allow the use of a pretty-printer
for variables of type our_time_t. Normally, pretty-printing sniffers
use the tag name in order to determine which, if any, pretty-printer
should be used. But in the case above, the tag name is not set, since
it does not apply to integral types.
This patch extends the gdb.Type list of attributes to also include
the name of the type, thus allowing the sniffer to match against
that name. With that change, I was able to write a pretty-printer
which displays our variable as follow:
(gdb) print current_time
$1 = Thu Nov 14 02:22:23 2013 (1384395743)
gdb/ChangeLog:
* python/py-type.c (typy_get_name): New function.
(type_object_getset): Add entry for attribute "name".
* NEWS: Add entry mentioning this new attribute.
gdb/doc/ChangeLog:
* gdb.texinfo (Types In Python): Document new attribute Types.name.
gdb/testsuite:
* gdb.python/py-pp-integral.c: New file.
* gdb.python/py-pp-integral.py: New file.
* gdb.python/py-pp-integral.exp: New file.
Tested on x86_64-linux.
This commit implements the needed bits for SystemTap SDT probe support
on AArch64 architectures.
First, I started by looking at AArch64 assembly specification and
filling the necessary options on gdbarch's stap machinery in order to
make the generic asm parser (implemented in stap-probe.c) recognize
AArch64's asm.
After my last patch for the SystemTap SDT API, which extends it in order
to accept multiple prefixes and suffixes, this patch became simpler. I
also followed Marcus suggestion and did not shared code between 32- and
64-bit ARM.
Tom asked me in a previous message how I did my tests. I believe I
replied that, but just in case: I ran the tests on
gdb.base/stap-probe.exp by hand. I also managed to run the tests on
real hardware, and they pass without regressions.
2013-12-28 Sergio Durigan Junior <sergiodj@redhat.com>
PR tdep/15653
* NEWS: Mention SystemTap SDT probe support for AArch64 GNU/Linux.
* aarch64-linux-tdep.c: Include necessary headers for parsing of
SystemTap SDT probes.
(aarch64_stap_is_single_operand): New function.
(aarch64_stap_parse_special_token): Likewise.
(aarch64_linux_init_abi): Declare SystemTap SDT probe argument
prefixes and suffixes. Initialize gdbarch with them.
PR python/16113
* NEWS (Python Scripting): Add entry for the new feature and the
new attribute of gdb.Field objects.
* python/py-type.c (gdbpy_is_field): New function
(convert_field): Add 'parent_type' attribute to gdb.Field
objects.
* python/py-value.c (valpy_getitem): Allow subscript value to be
a gdb.Field object.
(value_has_field): New function
(get_field_flag): New function
* python/python-internal.h (gdbpy_is_field): Add declaration.
testsuite/
* gdb.python/py-value-cc.cc: Improve test case.
* gdb.python/py-value-cc.exp: Add new tests to test usage of
gdb.Field objects as subscripts on gdb.Value objects.
doc/
* gdb.texinfo (Values From Inferior): Add a note about using
gdb.Field objects as subscripts on gdb.Value objects.
(Types In Python): Add description about the new attribute
"parent_type" of gdb.Field objects.
This adds "exec-run-start-option" in the output of the -list-features
commands, allowing front-ends to easily determine whether -exec-run
supports the --start option.
gdb/ChangeLog:
* mi/mi-main.c (mi_cmd_list_features): add "exec-run-start-option".
* NEWS: Expand the entry documenting the new -exec-run --start
option to mention the corresponding new entry in the output of
"-list-features".
gdb/doc/ChangeLog:
* gdb.texinfo (GDB/MI Miscellaneous Commands): Document the new
"exec-run-start-option" entry in the output of the "-list-features"
command.
gdb/testsuite/ChangeLog:
* gdb.mi/mi-start.exp: Add test verifying that -list-features
contains "exec-run-start-option".
This patch extends a bit the news entry we added which documents
general support of the --language option, to add a small reference
to the associated entry which was also added to the "-list-features"
command output.
gdb/ChangeLog:
* NEWS: Mention "-list-features" in the entry documenting
the support for the "--language" option.
... when trying to execute an undefined GDB/MI command. When trying
to execute a GDB/MI command which does not exist, the current error
result record looks like this:
-unsupported
^error,msg="Undefined MI command: unsupported"
The only indication that the command does not exist is the error
message. It would be a little fragile for a consumer to rely solely
on the contents of the error message in order to determine whether
a command exists or not.
This patch improves the situation by adding concept of error
code, starting with one well-defined error code ("undefined-command")
identifying errors due to a non-existant command. Here is the new
output:
-unsupported
^error,msg="Undefined MI command: unsupported",code="undefined-command"
This error code is only displayed when the corresponding error
condition is met. Otherwise, the error record remains unchanged.
For instance:
-symbol-list-lines foo.adb
^error,msg="-symbol-list-lines: Unknown source file name."
For frontends to be able to know whether they can rely on this
variable, a new entry "undefined-command-error-code" has been
added to the "-list-features" command. Another option would be
to always generate an error="..." variable (for the default case,
we could decide for instance that the error code is the empty string).
But it seems more efficient to provide that info in "-list-features"
and then only add the error code when meaningful.
gdb/ChangeLog:
(from Pedro Alves <palves@redhat.com>)
(from Joel Brobecker <brobecker@adacore.com>)
* exceptions.h (enum_errors) <UNDEFINED_COMMAND_ERROR>: New enum.
* mi/mi-parse.c (mi_parse): Throw UNDEFINED_COMMAND_ERROR instead
of a regular error when the GDB/MI command does not exist.
* mi/mi-main.c (mi_cmd_list_features): Add
"undefined-command-error-code".
(mi_print_exception): Print an "undefined-command"
error code if EXCEPTION.ERROR is UNDEFINED_COMMAND_ERROR.
* NEWS: Add entry documenting the new "code" variable in
"^error" result records.
gdb/doc/ChangeLog:
* gdb.texinfo (GDB/MI Result Records): Fix the syntax of the
"^error" result record concerning the error message. Document
the error code that may also be part of that result record.
(GDB/MI Miscellaneous Commands): Document the
"undefined-command-error-code" element in the output of
the "-list-features" GDB/MI command.
gdb/testsuite/ChangeLog:
* gdb.mi/mi-undefined-cmd.exp: New testcase.
This patch adds a new GDB/MI command meant for graphical frontends
trying to determine whether a given GDB/MI command exists or not.
Examples:
-info-gdb-mi-command unsupported-command
^done,command={exists="false"}
(gdb)
-info-gdb-mi-command symbol-list-lines
^done,command={exists="true"}
(gdb)
At the moment, this is the only piece of information that this
command returns.
Eventually, and if needed, we can extend it to provide
command-specific pieces of information, such as updates to
the command's syntax since inception. This could become,
for instance:
-info-gdb-mi-command symbol-list-lines
^done,command={exists="true",features=[]}
(gdb)
-info-gdb-mi-command catch-assert
^done,command={exists="true",features=["conditions"]}
In the first case, it would mean that no extra features,
while in the second, it announces that the -catch-assert
command in this version of the debugger supports a feature
called "condition" - exact semantics to be documented with
combined with the rest of the queried command's documentation.
But for now, we start small, and only worry about existance.
And to bootstrap the process, I have added an entry in the
output of the -list-features command as well ("info-gdb-mi-command"),
allowing the graphical frontends to go through the following process:
1. Send -list-features, collect info from there as before;
2. Check if the output contains "info-gdb-mi-command".
If it does, then support for various commands can be
queried though -info-gdb-mi-command. Newer commands
will be expected to always be checked via this new
-info-gdb-mi-command.
gdb/ChangeLog:
* mi/mi-cmds.h (mi_cmd_info_gdb_mi_command): Declare.
* mi/mi-cmd-info.c (mi_cmd_info_gdb_mi_command): New function.
* mi/mi-cmds.c (mi_cmds): Add -info-gdb-mi-command command.
* mi/mi-main.c (mi_cmd_list_features): Add "info-gdb-mi-command"
field to output of "-list-features".
* NEWS: Add entry for new -info-gdb-mi-command.
gdb/doc/ChangeLog:
* gdb.texinfo (GDB/MI Miscellaneous Commands): Document
the new -info-gdb-mi-command GDB/MI command. Document
the meaning of "-info-gdb-mi-command" in the output of
-list-features.
gdb/testsuite/ChangeLog:
* gdb.mi/mi-i-cmd.exp: New file.
Similar to stack cache, in this patch, we add
TARGET_OBJECT_CODE_MEMORY to read code from target and add a new
option "set code-cache on|off" to optimize code accesses by
using the target memory cache.
In V4:
- Remove "without affecting correctness" from NEWS and doc.
- Replace "ON" with "on" in doc.
- "access" -> "accesses".
In V3:
- Rename functions and variables.
- Update command help, doc and NEWS entry.
- Invalidate cache on option transitions, to align with
the behaviour of "stack-cache". Since cache invalidation is
transparent to users, users don't know option "stack-cache"
transitions cause code cache invalidation.
V2 was reviewed by Doug. There are some changes in V3, so I post it
here.
gdb:
2013-11-24 Yao Qi <yao@codesourcery.com>
* NEWS: Add note on new "set code-cache" option.
* target-dcache.c (code_cache_enabled_1): New variable.
(code_cache_enabled): New variable.
(show_code_cache, set_code_cache): New function.
(code_cache_enabled_p): New function.
(_initialize_target_dcache): Register command.
* target-dcache.h (code_cache_enabled_p): Declare.
* target.c (memory_xfer_partial_1):Handle
TARGET_OBJECT_CODE_MEMORY and code_cache_enabled.
(target_read_code): New function.
* target.h (enum target_object) <TARGET_OBJECT_CODE_MEMORY>:
New.
(target_read_code): Declare.
gdb/doc:
2013-11-24 Yao Qi <yao@codesourcery.com>
* gdb.texinfo (Caching Remote Data): Document new
"set/show stack-cache" option.
