changes to include/coff/internal.h. Fix minor errors in the
existing relocs. Add R_MOVL1 and R_MOVL2.
(rtype2howto): Similarly.
(h8300_reloc16_estimate): Rewrite to simplify, fix bugs in the
existing relaxing code and peform more relaxing.
(h8300_reloc16_extra_cases): Likewise.
Simplify, cleanup, fix bugs and improve existing relaxing code.
Add code for changing a 24/32bit absolute address into a 16bit absolute
address.
HMSE.
non-zero before assuming this is a long file name.
(w_strings): Likewise.
(c_dot_file_symbol): Set FNAME_OFFSET to 1 for a long file name.
* config/obj-coff.c (w_strings): Move declaration of i inside
#ifdef block which uses it.
"relaxmode". Output relocs which identify various relaxing
possibilities for mov.[bwl] instructions.
(build_bytes): Pass in a relaxing mode to do_a_fix_imm.
So the linker can identify more potential relaxations. HMSE.
explaining what each reloc is used for.
(R_MOV16B1, R_MOV16B2): Renamed from R_MOVB1 and R_MOVB2.
(R_MOV24B1, R_MOV24B2): Renamed from R_MOVLB1 and R_MOVLB2.
(R_MOVL1, R_MOVL2): New relocs.
More changes for the H8/300 relaxing linker. HMSE.
(MD_APPLY_FIX3): Define.
* config/tc-arm.c (my_get_expression): Only watch for bad segments
if OBJ_AOUT.
(md_apply_fix3): Renamed from md_apply_fix.
If pcrel reloc and symbol is in different section, undo effects
of md_pcrel_from.
returns a possibly modified pid.
* inftarg.c (ptrace_him): Now returns pid;
* m3-nat.c (m3_trace_him): Now returns pid;
* infcmd.c (run_command): Minor cleanup.
* infrun.c (wait_for_inferior): Add another check for one_stepped
near where we read the pc to avoid erroneously setting
random_signal for multi-threaded support.
* procfs.c: Add support for Solaris LWPs. Remove def of
LOSING_POLL. Many cleanups... Several workarounds for Solaris
lossage. System call entry and exit are now handled by
dynamically registered handlers.
* (syscallname): Don't barf when handed an unknown syscall
number.
* (info_proc_syscalls): Ditto.
* sol-thread.c: New file. Implements Solaris thread support.
* symfile.c (symbol_file_add): Add call to target_new_objfile to
notify target-dependent code about new symbol tables.
* (clear_symtab_users): Call target_new_objfile to notify it of
the removal of all symbol tables.
* target.c (push_target): Make sure that to_close is non-zero
before calling it.
* target.h (target_new_objfile): Provide default.
* config/alpha/nm-osf2.h: Define LOSING_POLL because this version
of OSF can't hack using poll with /proc.
* config/sparc/nm-sun4sol2.h (target_new_objfile): Define to be
sol-thread-new-objfile.
* config/sparc/sun4sol2.mh: Add sol-thread.o to NATDEFFILES, and
add libthread_db.so.1 to NAT_CLIBS.
* config/sparc/tm-sun4sol2.h: Define PIDGET, TIDGET, and
target_pid_to_str.
e_machine matches an alternate machine code in a specific backend.
* netbsd-core.c (netbsd_core_vec): Remove initializer for
obsolete align_power_min field.
R_PCRWORD_B.
(rtype2howto): Handle R_PCRWORD_B.
(h8300_reloc16_extra_cases): Handle R_PCRWORD_B.
(h8300_reloc_16_estimate): Likewise. Try to turn a 16bit
pc-relative branch (R_PCRWORD) into an 8bit pc-relative
branch (R_PCWORD_B).
So we can turn 16bit pcrel branches into 8bit pcrel branches on the H8/300H.
HMSE.
(insert_breakpoint_tag, delete_breakpoint_tag): Fix range.
(file_popup_menu): Delete, never used.
(listing_window_popup): Rename from listing_window_button_1,
remove breakpoint toggling code.
(toggle_breakpoint): New procedure.
(create_file_win): Bind popup menu to button 2, toggle breakpoints
with button 1 in breakpoint area, add display of tagged areas if
debugging on.
* breakpoint.h (enum bpdisp): Add del_at_next_stop.
* breakpoint.c (insert_breakpoints, watchpoint_check,
bpstat_stop_status): Avoid bad references to memory freed via
delete_breakpoint on watchpoints going out of scope.
Do not delete these watchpoints, disable them and change their
disposition to del_at_next_stop instead.
(breakpoint_auto_delete): Delete all breakpoints whose disposition
is del_at_next_stop.
(breakpoint_init_inferior): Use switch to avoid reference to
already deleted breakpoint.
Fixes dangling pointer problems with watchpoints.
BFD_ASSEMBLER, add name field.
* config/obj-coff.c (coff_header_append): Handle long section
names.
(crawl_symbols): Just use the name field for the symbol name,
without worrying about null byte termination.
(w_strings): Handle long section names.
(write_object_file): Likewise. Also, use the name field, rather
than scnhdr.s_name.
(obj_coff_add_segment): Permit long section names.
(obj_coff_init_stab_section): Use the name field, rather than
scnhdr.s_name.
(adjust_stab_section): Likewise.
* config/te-pe.h (COFF_LONG_SECTION_NAMES): Define.
* config/rs6000/rs6000.mh (NATDEPFILES): Move xcoffread.o ...
* config/rs6000/rs6000.mt (TDEPFILES): ... to here
* xcoffsolib.c (xcoff_relocate_symtab_hook): Define and initialize.
(solib_info): Call xcoff_relocate_symtab via the hook.
(sharedlibrary_command): Ditto.
* xcoffread.c: Remove all FAKING_RS6000 comments and defines.
(xcoff_add_toc_to_loadinfo_hook): Define and initialize here.
(xcoff_init_loadinfo_hook): Define and initialize here.
(scan_xcoff_symtab): Call xcoff_add_toc_to_loadinfo via the hook.
(xcoff_initial_scan): Call xcoff_init_loadinfo via the hook.
* xcoffsolib.h (xcoff_relocate_symtab_hook): Declare extern func.
* rs6000-tdep.c (_initialize_rs6000_tdep): Add initializations
of xcoff_add_toc_to_loadinfo_hook and xcoff_init_loadinfo_hook.
* rs6000-nat.c (_initialize_core_rs6000): Add initialization
of xcoff_relocate_symtab_hook.
(SECTION_NAME_MAP_LENGTH): Define.
(print_size, print_alignment, print_fill, print_section): Remove.
(print_flags): Remove.
(lang_map): Rewrite.
(print_output_section_statement): Rewrite.
(print_assignment): Rewrite.
(print_one_symbol): Rewrite.
(print_input_section): Rewrite.
(print_fill_statement): Rewrite.
(print_data_statement): Rewrite.
(print_address_statement): New static function.
(print_reloc_statement): Rewrite.
(print_padding_statement): Rewrite.
(print_wild_statement): Rewrite.
(print_statement_list): Clean up.
(print_statement): Clean up. Some minor output changes.
(print_statements): Clean up.
(load_symbols): Put another - before -whole-archive.
* ldexp.c (exp_print_tree): Change etree_value and etree_rel to
print 0x and to omit leading zeroes. For etree_rel, use %B to
print the BFD. For etree_assign, remove the space after the
destination name.
* ldwrite.c: Include "libiberty.h".
(clone_section): Call xstrdup, not strdup.
(ldwrite): Don't print any map information.
(print_symbol_table, print_file_stuff, print_symbol): Remove.
* ldmain.c (main): Call lang_map when appropriate.
* ldmisc.c (vfinfo): Add support for %W.
(print_address): Remove.
* ldmisc.h (print_address): Don't declare.
* Makefile.in: Rebuild dependencies.
