This change moves the microMIPS 10-bit uninterpreted immediate code
embedded at bits 25..16 in the SYSCALL, WAIT, SDBBP and HYPCALL
instructions from `B' over to `+J' which is the operand code used in
the standard MIPS instruction set for a similar code embedded at bits
20..11, currently used by HYPCALL only in that set.
opcodes/
* micromips-opc.c (decode_micromips_operand): Rename `B' to `+J'.
(micromips_opcodes): Use "+J" in place of "B" for "hypcall",
"sdbbp", "syscall" and "wait".
include/opcode/
* mips.h: Document the move of `MICROMIPSOP_*_CODE10' from `B'
over to `+J'.
gas/
* config/tc-mips.c: Rename INSN_LOAD_COPROC_DELAY to INSN_LOAD_COPROC
and INSN_COPROC_MOVE_DELAY to INSN_COPROC_MOVE throughout.
include/opcode/
* mips.h (INSN_LOAD_COPROC_DELAY): Rename to...
(INSN_LOAD_COPROC): New define.
(INSN_COPROC_MOVE_DELAY): Rename to...
(INSN_COPROC_MOVE): New define.
opcodes/
* micromips-opc.c (COD): Rename throughout to...
(CM): New define, update to use INSN_COPROC_MOVE.
(LCD): Rename throughout to...
(LC): New define, update to use INSN_LOAD_COPROC.
* mips-opc.c: Likewise.
* archures.c: add avrtiny architecture for avr target.
* bfd-in2.h: Regenerate.
* cpu-avr.c (arch_info_struct): add avrtiny arch info.
* elf32-avr.c (elf_avr_howto_table): new relocation R_AVR_LDS_STS_16
added for 16 bit LDS/STS instruction of avrtiny arch.
(avr_reloc_map): reloc R_AVR_LDS_STS_16 is mapped to
BFD_RELOC_AVR_LDS_STS_16.
(bfd_elf_avr_final_write_processing): select machine number avrtiny arch.
(elf32_avr_object_p): set machine number for avrtiny arch.
* libbfd.h: Regenerate.
* reloc.c: Add documentation for BFD_RELOC_AVR_LDS_STS_16 reloc.
* config/tc-avr.c (mcu_types): Add avrtiny arch.
Add avrtiny arch devices attiny4, attiny5, attiny9, attiny10, attiny20
and attiny40.
(md_show_usage): Add avrtiny arch in usage message.
(avr_operand): validate and issue error for invalid register for avrtiny.
add new reloc exp for 16 bit lds/sts instruction.
(md_apply_fix): check 16 bit lds/sts operand for out of range and encode.
(md_assemble): check ISA for arch and issue diagnostic.
* include/elf/avr.h (E_AVR_MACH_AVRTINY): define avrtiny machine number.
(R_AVR_LDS_STS_16): define 16 bit lds/sts reloc number.
* include/opcode/avr.h (AVR_ISA_TINY): define avrtiny specific ISA.
(AVR_ISA_2xxxa): define ISA without LPM.
(AVR_ISA_AVRTINY): define avrtiny arch ISA.
Add doc for contraint used in 16 bit lds/sts.
Adjust ISA group for icall, ijmp, pop and push.
Add 16 bit lds/sts encoding and update 32 bit lds/sts constraints.
* opcodes/avr-dis.c (avr_operand): Handle constraint j for 16 bit lds/sts.
(print_insn_avr): do not select opcode if insn ISA is avrtiny and machine
is not avrtiny.
* Makefile.am (ALL_EMULATION_SOURCES): add avrtiny emulation source.
(eavrtiny.c): add rules for avrtiny emulation source.
* Makefile.in: Regenerate.
* configure.tgt: Add avrtiny to avr target emulations.
* scripttempl/avrtiny.sc: New file.
linker script template for avrtiny arch.
* emulparams/avrtiny.sh: New file.
emulation parameters for avrtiny arch.
* config/tc-msp430.c (CHECK_RELOC_MSP430): Add OP parameter.
Generate BFD_RELOC_MSP430_ABS_HI16 if vshift is 1.
(msp430_srcoperand): Store vshift value in operand.
* msp430.h (struct msp430_operand_s): Add vshift field.
* gas/elf/struct.d: Expect extra output from some toolchains.
* gas/symver/symver0.d: Likewise.
* gas/symver/symver1.d: Likewise.
This patch firstly adds support for mips32r3 mips32r5, mips64r3
and mips64r5. Secondly it adds support for the eretnc instruction.
ChangeLog:
bfd/
* aoutx.h (NAME (aout, machine_type)): Add mips32r3, mips64r3,
mips32r5 and mips64r5.
* archures.c (bfd_architecture): Likewise.
* bfd-in2.h (bfd_architecture): Likewise.
* cpu-mips.c (arch_info_struct): Likewise.
* elfxx-mips.c (mips_set_isa_flags): Likewise.
gas/
* tc-mips.c (ISA_SUPPORTS_MIPS16E): Add mips32r3, mips32r5, mips64r3
and mips64r5.
(ISA_HAS_64BIT_FPRS): Likewise.
(ISA_HAS_ROR): Likewise.
(ISA_HAS_ODD_SINGLE_FPR): Likewise.
(ISA_HAS_MXHC1): Likewise.
(hilo_interlocks): Likewise.
(md_longopts): Likewise.
(ISA_HAS_64BIT_REGS): Add mips64r3 and mips64r5.
(ISA_HAS_DROR): Likewise.
(options): Add OPTION_MIPS32R3, OPTION_MIPS32R5, OPTION_MIPS64R3, and
OPTION_MIPS64R5.
(mips_isa_rev): Add support for mips32r3, mips32r5, mips64r3 and
mips64r5.
(md_parse_option): Likewise.
(s_mipsset): Likewise.
(mips_cpu_info_table): Add entries for mips32r3, mips32r5, mips64r3
and mips64r5. Also change p5600 entry to be mips32r5.
* configure.in: Add support for mips32r3, mips32r5, mips64r3 and
mips64r5.
* configure: Regenerate.
* doc/c-mips.texi: Document the -mips32r3, -mips32r5, -mips64r3 and
-mips64r5 command line options.
* doc/as.texinfo: Likewise.
gas/testsuite/
* gas/mips/mips.exp: Add MIPS32r5 tests. Also add the mips32r3,
mips32r5, mips64r3 and mips64r5 isas to the testsuite.
* gas/mips/r5.s: New test.
* gas/mips/r5.d: Likewise.
include/opcode/
* mips.h (INSN_ISA_MASK): Updated.
(INSN_ISA32R3): New define.
(INSN_ISA32R5): New define.
(INSN_ISA64R3): New define.
(INSN_ISA64R5): New define.
(INSN_ISA64, INSN_ISA64R2, INSN_ISA3_32, INSN_ISA3_32R2, INSN_ISA4_32
INSN_ISA4_32R2, INSN_ISA5_32R2): Renumbered.
(mips_isa_table): Add entries for mips32r3, mips32r5, mips64r3 and
mips64r5.
(INSN_UPTO32R3): New define.
(INSN_UPTO32R5): New define.
(INSN_UPTO64R3): New define.
(INSN_UPTO64R5): New define.
(ISA_MIPS32R3): New define.
(ISA_MIPS32R5): New define.
(ISA_MIPS64R3): New define.
(ISA_MIPS64R5): New define.
(CPU_MIPS32R3): New define.
(CPU_MIPS32R5): New define.
(CPU_MIPS64R3): New define.
(CPU_MIPS64R5): New define.
opcodes/
* mips-opc.c (mips_builtin_opcodes): Add MIPS32r5 eretnc instruction.
(I34): New define.
(I36): New define.
(I66): New define.
(I68): New define.
* mips-dis.c (mips_arch_choices): Add mips32r3, mips32r5, mips64r3 and
mips64r5.
(parse_mips_dis_option): Update MSA and virtualization support to
allow mips64r3 and mips64r5.
ChangeLog:
binutils/
* doc/binutils.texi: Document the disassemble MIPS XPA instructions
command line option.
gas/
* config/tc-mips.c (options): Add OPTION_XPA and OPTION_NO_XPA.
(md_longopts): Add xpa and no-xpa command line options.
(mips_ases): Add MIPS XPA ASE.
(mips_cpu_info_table): Update p5600 entry to allow the XPA ASE.
* doc/as.texinfo: Document the MIPS XPA command line options.
* doc/c-mips.texi: Document the MIPS XPA command line options,
and assembler directives.
gas/testsuite/
* gas/mips/mips.exp: Add xpa tests.
* gas/mips/xpa.s: New test.
* gas/mips/xpa.d: Likewise.
include/
* opcode/mips.h (ASE_XPA): New define.
opcodes/
* mips-dis.c (mips_arch_choices): Update mips32r2 and mips64r2
to allow the MIPS XPA ASE.
(parse_mips_dis_option): Process the -Mxpa option.
* mips-opc.c (XPA): New define.
(mips_builtin_opcodes): Add MIPS XPA instructions and move the
locations of the ctc0 and cfc0 instructions.
The element index range for the following MIPS MSA instructions: sldi, splati,
copy_s, copy_u, insert and insve is 1 bit too large. This patch fixes this issue.
ChangeLog:
gas/testsuite/gas/mips/
* msa.s: Reduced maximum element index range for sldi, splati,
copy_s, copy_u, insert and insve instructions.
* msa64.s: Likewise.
* micromips@msa.d: Likewise.
* micromips@msa64.d: Likewise.
* msa.d: Likewise.
* msa64.d: Likewise.
include/opcode/
* mips.h: Updated description of +o, +u, +v and +w for MIPS and
microMIPS.
opcodes/
* micromips-opc.c (decode_micromips_operand): Reduced range of +o, +u,
+v and +w.
(micromips_opcodes): Reduced element index range for sldi, splati,
copy_s, copy_u, insert and insve instructions.
* opcodes/mips-opc.c (decode_mips_operand): Reduced range of +o, +u,
+v and +w.
(mips_builtin_opcodes): Reduced element index range for sldi, splati,
copy_s, copy_u, insert and insve instructions.
These files are source files and have no business being +x. We couldn't
easily fix it in CVS (you need login+write access to the raw rcs files),
but we can fix this w/git.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
gas/
* config/tc-arm.c (arm_archs): New armv7ve architecture option.
(arm_cpus): Replace ARM_ARCH_V7A_IDIV_MP_SEC_VIRT with
ARM_ARCH_V7VE for cortex-a7, cortex-a12 and cortex-a15.
(cpu_arch_ver): Likewise.
* doc/c-arm.texi: Document armv7ve.
gas/testsuite/
* gas/arm/attr-march-armv7ve.d: New test case for armv7ve.
include/opcode/
* arm.h (ARM_AEXT_V7VE): New define.
(ARM_ARCH_V7VE): New define.
(ARM_ARCH_V7A_IDIV_MP_SEC_VIRT): Removed.
* config/tc-aarch64.c (set_other_error): New function.
(parse_sys_reg): Add new parameter 'sys_reg' and if non-NULL set
the variable to which it points with 'o'.
(parse_operands): Update; check for write to read-only system
registers or read from write-only ones.
gas/testsuite/
* gas/aarch64/diagnostic.s: Add tests.
* gas/aarch64/diagnostic.l: Update.
* gas/aarch64/tracereg-illegal.d: New file.
* gas/aarch64/tracereg-illegal.l: Ditto.
* gas/aarch64/tracereg-illegal.s: Ditto.
* gas/aarch64/tracereg.d: Ditto.
* gas/aarch64/tracereg.s: Ditto.
include/opcode
* aarch64.h (aarch64_sys_reg_readonly_p): New declaration.
(aarch64_sys_reg_writeonly_p): Ditto.
opcodes/
* aarch64-opc.c (CPENT): New define.
(F_READONLY, F_WRITEONLY): Likewise.
(aarch64_sys_regs): Add trace unit registers.
(aarch64_sys_reg_readonly_p): New function.
(aarch64_sys_reg_writeonly_p): Ditto.
* config/tc-aarch64.c (parse_sys_reg): Update to use aarch64_sys_reg;
call aarch64_sys_reg_deprecated_p and warn about the deprecated
system registers.
gas/testsuite/
* gas/aarch64/deprecated.d: New file.
* gas/aarch64/deprecated.l: New file.
* gas/aarch64/deprecated.s: New file.
* gas/aarch64/sysreg-1.s: Add tests.
* gas/aarch64/sysreg-1.d: Add tests.
include/opcode/
* aarch64.h (aarch64_sys_reg): New typedef.
(aarch64_sys_regs): Change to define with the new type.
(aarch64_sys_reg_deprecated_p): Declare.
opcodes/
* aarch64-opc.c (F_DEPRECATED): New macro.
(aarch64_sys_regs): Update; flag "spsr_svc" and "spsr_hyp" with
F_DEPRECATED.
(aarch64_print_operand): Call aarch64_sys_reg_deprecated_p on
AARCH64_OPND_SYSREG.
* mips.h (M_DEXT, M_DINS): Delete.
opcodes/
* micromips-opc.c (micromips_opcodes): Replace "dext" and "dins"
macro entries with "dextm", "dextu", "dinsm" and "dinsu" aliases.
Use +H rather than +C for the real "dext".
* mips-opc.c (mips_builtin_opcodes): Likewise.
gas/
* config/tc-mips.c (report_bad_range, report_bad_field): Delete.
(macro): Remove M_DEXT and M_DINS handling.
gas/testsuite/
* gas/mips/ext-ill.l, gas/mips/mips64r2-ill.l: Expect DEXT and DINS
error messages to have the same form as the EXT and INS ones.
* gas/mips/micromips-insn32.d, gas/mips/micromips-noinsn32.d,
gas/mips/micromips-trap.d, gas/mips/micromips.d,
gas/mips/micromips@mips64r2.d, gas/mips/mips64r2.d: Expect
"dext" and "dins" instead of "dextm", "dextu", "dinsm" and "dinsu".
2013-08-04 Jürgen Urban <JuergenUrban@gmx.de>
Richard Sandiford <rdsandiford@googlemail.com>
* mips.h: Document new VU0 operand characters.
(OP_VU0_SUFFIX, OP_VU0_MATCH_SUFFIX): New mips_operand_types.
(OP_REG_VF, OP_REG_VI, OP_REG_R5900_I, OP_REG_R5900_Q, OP_REG_R5900_R)
(OP_REG_R5900_ACC): New mips_reg_operand_types.
(INSN2_VU0_CHANNEL_SUFFIX): New macro.
(mips_vu0_channel_mask): Declare.
opcodes/
2013-08-04 Jürgen Urban <JuergenUrban@gmx.de>
Richard Sandiford <rdsandiford@googlemail.com>
* mips-dis.c (print_reg): Handle OP_REG_VI, OP_REG_VF, OP_REG_R5900_I,
OP_REG_R5900_Q, OP_REG_R5900_R and OP_REG_R5900_ACC.
(print_vu0_channel): New function.
(print_insn_arg): Handle OP_VU0_SUFFIX and OP_VU0_MATCH_SUFFIX.
(print_insn_args): Handle '#'.
(print_insn_mips): Handle INSN2_VU0_CHANNEL_SUFFIX.
* mips-opc.c (mips_vu0_channel_mask): New constant.
(decode_mips_operand): Handle new VU0 operand types.
(VU0, VU0CH): New macros.
(mips_builtin_opcodes): Add VU0 opcodes. Use "+7" rather than "E"
for LQC2 and SQC2. Use "+9" rather than "G" for EE CFC2 and CTC2.
Use "+6" rather than "G" for QMFC2 and QMTC2.
gas/
2013-08-04 Jürgen Urban <JuergenUrban@gmx.de>
Richard Sandiford <rdsandiford@googlemail.com>
* config/tc-mips.c (MAX_OPERANDS): Bump to 6.
(RWARN): Bump to 0x8000000.
(RTYPE_VI, RTYPE_VF, RTYPE_R5900_I, RTYPE_R5900_Q, RTYPE_R5900_R)
(RTYPE_R5900_ACC): New register types.
(RTYPE_MASK): Include them.
(R5900_I_NAMES, R5900_Q_NAMES, R5900_R_NAMES, R5900_ACC_NAMES): New
macros.
(reg_names): Include them.
(mips_parse_register_1): New function, split out from...
(mips_parse_register): ...here. Add a channels_ptr parameter.
Look for VU0 channel suffixes when nonnull.
(reg_lookup): Update the call to mips_parse_register.
(mips_parse_vu0_channels): New function.
(OT_CHANNELS, OT_DOUBLE_CHAR): New mips_operand_token_types.
(mips_operand_token): Add a "channels" field to the union.
Extend the comment above "ch" to OT_DOUBLE_CHAR.
(mips_parse_base_start): Match -- and ++. Handle channel suffixes.
(mips_parse_argument_token): Handle channel suffixes here too.
(validate_mips_insn): Handle INSN2_VU0_CHANNEL_SUFFIX.
Ignore OP_VU0_MATCH_SUFFIX when calculating the used bits.
Handle '#' formats.
(md_begin): Register $vfN and $vfI registers.
(operand_reg_mask): Handle OP_VU0_SUFFIX and OP_VU0_MATCH_SUFFIX.
(convert_reg_type): Handle OP_REG_VI, OP_REG_VF, OP_REG_R5900_I,
OP_REG_R5900_Q, OP_REG_R5900_R and OP_REG_R5900_ACC.
(match_vu0_suffix_operand): New function.
(match_operand): Handle OP_VU0_SUFFIX and OP_VU0_MATCH_SUFFIX.
(macro): Use "+7" rather than "E" for LDQ2 and STQ2.
(mips_lookup_insn): New function.
(mips_ip): Use it. Allow "+K" operands to be elided at the end
of an instruction. Handle '#' sequences.
gas/testsuite/
2013-08-04 Jürgen Urban <JuergenUrban@gmx.de>
* gas/mips/r5900-vu0.d: Expect $vfN and $viN instead of numeric
coprocessor registers.
* gas/mips/r5900-all-vu0.s, gas/mips/r5900-all-vu0.d,
gas/mips/r5900-full-vu0.s, gas/mips/r5900-full-vu0.d,
gas/mips/r5900-error-vu0.s, gas/mips/r5900-error-vu0.l: New tests.
* gas/mips/mips.exp: Run them.
* mips.h (mips_pcrel_operand): Inherit from mips_int_operand.
(mips_int_operand_min, mips_int_operand_max): New functions.
(mips_decode_pcrel_operand): Use mips_decode_int_operand.
opcodes/
* mips-formats.h (PCREL): Reorder parameters and update the definition
to match new mips_pcrel_operand layout.
(JUMP, JALX, BRANCH): Update accordingly.
* mips16-opc.c (decode_mips16_operand): Likewise.
gas/
* config/tc-mips.c (match_int_operand): Use mips_int_operand_min
and mips_int_operand_max.
(mips16_immed_operand, mips16_immed_operands, MIPS16_NUM_IMMED):
Delete.
(mips16_immed_operand, mips16_immed_in_range_p): New functions.
(mips16_immed, mips16_extended_frag): Use them. Use mips_int_operand
instead of mips16_immed_operand.
* mips.h (MIPS16_INSN_WRITE_SP, MIPS16_INSN_READ_31)
(MIPS16_INSN_READ_PC, MIPS16_INSN_UNCOND_BRANCH)
(MIPS16_INSN_COND_BRANCH): Delete.
opcodes/
* mips16-opc.c (UBR, CBR, RD_31, RD_PC): Redefine as INSN2_* flags.
(WR_SP): Replace with...
(MOD_SP): ...this.
(mips16_opcodes): Update accordingly.
* mips-dis.c (print_insn_mips16): Likewise.
gas/
* config/tc-mips.c (compact_branch_p, uncond_branch_p): Use the same
flags for MIPS16 and non-MIPS16 instructions.
(gpr_mod_mask): Move the INSN2_MOD_SP case outside the micromips block.
(gpr_read_mask): Use INSN2_READ_GPR_31 for MIPS16 instructions too.
(gpr_write_mask): Remove MIPS16_INSN_WRITE_SP handling.
(can_swap_branch_p, get_append_method): Use the same flags for MIPS16
and non-MIPS16 instructions. Fix formatting.
* mips.h (mips_operand_type, mips_reg_operand_type): New enums.
(mips_operand, mips_int_operand, mips_mapped_int_operand)
(mips_msb_operand, mips_reg_operand, mips_reg_pair_operand)
(mips_pcrel_operand): New structures.
(mips_insert_operand, mips_extract_operand, mips_signed_operand)
(mips_decode_int_operand, mips_decode_pcrel_operand): New functions.
(decode_mips_operand, decode_micromips_operand): Declare.
opcodes/
* mips-formats.h: New file.
* mips-opc.c: Include mips-formats.h.
(reg_0_map): New static array.
(decode_mips_operand): New function.
* micromips-opc.c: Remove <stdio.h> include. Include mips-formats.h.
(reg_0_map, reg_28_map, reg_29_map, reg_31_map, reg_m16_map)
(reg_mn_map, reg_q_map, reg_h_map1, reg_h_map2, int_b_map)
(int_c_map): New static arrays.
(decode_micromips_operand): New function.
* mips-dis.c (micromips_to_32_reg_b_map, micromips_to_32_reg_c_map)
(micromips_to_32_reg_d_map, micromips_to_32_reg_e_map)
(micromips_to_32_reg_f_map, micromips_to_32_reg_g_map)
(micromips_to_32_reg_h_map1, micromips_to_32_reg_h_map2)
(micromips_to_32_reg_l_map, micromips_to_32_reg_m_map)
(micromips_to_32_reg_n_map, micromips_to_32_reg_q_map)
(micromips_imm_b_map, micromips_imm_c_map): Delete.
(print_reg): New function.
(mips_print_arg_state): New structure.
(init_print_arg_state, print_insn_arg): New functions.
(print_insn_args): Change interface and use mips_operand structures.
Delete GET_OP_S. Move GET_OP definition to...
(print_insn_mips): ...here. Update the call to print_insn_args.
(print_insn_micromips): Use print_insn_args.
gas/
* config/tc-mips.c (validate_mips_insn): Move further up file.
Add insn_bits and decode_operand arguments. Use the mips_operand
fields to work out which bits an operand occupies. Detect double
definitions.
(validate_micromips_insn): Move further up file. Call into
validate_mips_insn.
* mips.h (M_ACLR_OB, M_ASET_OB, M_CACHE_OB, M_CACHEE_OB, M_L_DOB)
(M_LB_A, M_LBE_OB, M_LBU_A, M_LBUE_OB, M_LD_A, M_LD_OB, M_LDC2_OB)
(M_LDL_OB, M_LDM_OB, M_LDP_OB, M_LDR_OB, M_LH_A, M_LHE_OB, M_LHU_A)
(M_LHUE_OB, M_LL_OB, M_LLD_OB, M_LLE_OB, M_LS_A, M_LW_A, M_LWE_OB)
(M_LWC0_A, M_LWC1_A, M_LWC2_A, M_LWC2_OB, M_LWC3_A, M_LWL_A, M_LWL_OB)
(M_LWLE_OB, M_LWM_OB, M_LWP_OB, M_LWR_A, M_LWR_OB, M_LWRE_OB, M_LWU_OB)
(M_PREF_OB, M_PREFE_OB, M_S_DOB, M_SAA_OB, M_SAAD_OB, M_SC_OB)
(M_SCD_OB, M_SCE_OB, M_SD_A, M_SD_OB, M_SDC2_OB, M_SDL_OB, M_SDM_OB)
(M_SDP_OB, M_SDR_OB, M_SB_A, M_SBE_OB, M_SH_A, M_SHE_OB, M_SW_A)
(M_SWE_OB, M_SWC0_A, M_SWC1_A, M_SWC2_A, M_SWC2_OB, M_SWC3_A, M_SWL_A)
(M_SWL_OB, M_SWLE_OB, M_SWM_OB, M_SWP_OB, M_SWR_A, M_SWR_OB, M_SWRE_OB)
(M_ULD, M_ULH, M_ULHU, M_ULW, M_USH, M_USW, M_USD): Delete.
(M_ULD_A, M_ULH_A, M_ULHU_A, M_ULW_A, M_USH_A, M_USW_A, M_USD_A):
Rename to...
(M_ULD_AB, M_ULH_AB, M_ULHU_AB, M_ULW_AB, M_USH_AB, M_USW_AB)
(M_USD_AB): ...these.
opcodes/
* mips-opc.c (mips_builtin_opcodes): Remove o(b) macros. Move LD
and SD A(B) macros up.
* micromips-opc.c (micromips_opcodes): Likewise.
gas/
* config/tc-mips.c (gprel16_reloc_p): New function.
(macro_read_relocs): Assume BFD_RELOC_LO16 if all relocs are
BFD_RELOC_UNUSED.
(offset_high_part, small_offset_p): New functions.
(nacro): Use them. Remove *_OB and *_DOB cases. For single-
register load and store macros, handle the 16-bit offset case first.
If a 16-bit offset is not suitable for the instruction we're
generating, load it into the temporary register using
ADDRESS_ADDI_INSN. Make the M_LI_DD code fall through into the
M_L_DAB code once the address has been constructed. For double load
and store macros, again handle the 16-bit offset case first.
If the second register cannot be accessed from the same high
part as the first, load it into AT using ADDRESS_ADDI_INSN.
Fix the handling of LD in cases where the first register is the
same as the base. Also handle the case where the offset is
not 16 bits and the second register cannot be accessed from the
same high part as the first. For unaligned loads and stores,
fuse the offbits == 12 and old "ab" handling. Apply this handling
whenever the second offset needs a different high part from the first.
Construct the offset using ADDRESS_ADDI_INSN where possible,
for offbits == 16 as well as offbits == 12. Use offset_reloc
when constructing the individual loads and stores.
(mips_ip): Set up imm_expr, imm2_expr, offset_expr, imm_reloc
and offset_reloc before matching against a particular opcode.
Handle elided 'A' constants. Allow 'A' constants to use
relocation operators.
gas/testsuite/
* gas/mips/ldstla-32.d: Avoid "lui at,0x0" sequences for
truncated constants.
* gas/mips/ldstla-32-shared.d: Likewise.
* gas/mips/mcu.d: Use ADDIU in preference to LI+ADDU when adding
16-bit constants to the base.
* gas/mips/micromips@mcu.d: Likewise.
* gas/mips/micromips@cache.d: Likewise.
* gas/mips/micromips@pref.d: Likewise.
* gas/mips/micromips.d, gas/mips/micromips-insn32.d,
gas/mips/micromips-noinsn32.d, gas/mips/micromips-trap.d: Likewise.
Allow the full 16-bit offset range to be used for SB, LB and LBU in
USH and ULH sequences. Fix the expected output for LD and SD when
the two LW and SW offsets need different high parts.
* gas/mips/eva.s: Test PREFE with relocation operators.
* gas/mips/eva.d: Use ADDIU in preference to LI+ADDU for 16-bit
constants. Update after eva.s change.
* gas/mips/micromips@eva.d: Likewise.
* gas/mips/ld-reloc.s, gas/mips/ld-reloc.d, gas/mips/l_d-reloc.s,
gas/mips/l_d-reloc.d, gas/mips/ulw-reloc.s, gas/mips/ulw-reloc.d,
gas/mips/micromips@ulw-reloc.d, gas/mips/ulh-reloc.s,
gas/mips/ulh-reloc.d: New tests.
* gas/mips/mips.exp: Run them.
* mips.h: Remove documentation of "[" and "]". Update documentation
of "k" and the MDMX formats.
opcodes/
* mips-opc.c (mips_builtin_opcodes): Use "Q" for the INSN_5400
MDMX-like instructions.
* mips-dis.c (print_insn_arg): Use "$f" rather than "$v" when
printing "Q" operands for INSN_5400 instructions.
gas/
* config/tc-mips.c (validate_mips_insn): Remove "[" and "]" handling.
(mips_ip): Likewise. Do not set is_mdmx for INSN_5400 instructions.
Check constraints on the VR5400 RZU.OB, SLL.OB and SRL.OB instructions.
gas/testsuite/
* gas/mips/vr5400-ill.s, gas/mips/vr5400-ill.l: New test.
* gas/mips/mips.exp: Run it.
* mips.h: Update documentation of "+s" and "+S".
opcodes/
* mips-opc.c (mips_builtin_opcodes): Use "+s" for "cins32" and
"+S" for "cins".
* mips-dis.c (print_mips_arg): Update "+s" and "+S" comments.
Combine cases.
gas/
* config/tc-mips.c (mips_ip): Preserve the real bit number for "+p".
Require the msb to be <= 31 for "+s". Check that the size is <= 31
for both "+s" and "+S".
* mips.h: Document "+i".
opcodes/
* mips-opc.c (mips_builtin_opcodes): Use "+i" rather than "a" for
"jalx".
* mips16-opc.c (mips16_opcodes): Likewise.
* micromips-opc.c (micromips_opcodes): Likewise.
* mips-dis.c (print_insn_args, print_mips16_insn_arg)
(print_insn_mips16): Handle "+i".
(print_insn_micromips): Likewise. Conditionally preserve the
ISA bit for "a" but not for "+i".
gas/
* config/tc-mips.c (validate_mips_insn, validate_micromips_insn):
(mips_ip, mips16_ip): Handle "+i".
* mips.h: Remove documentation of "+D" and "+T".
opcodes/
* mips-opc.c (mips_builtin_opcodes): Remove "+D" and "+T" entries.
* micromips-opc.c (micromips_opcodes): Likewise.
* mips-dis.c (print_insn_args, print_insn_micromips): Remove "+D"
and "+T" handling. Check for a "0" suffix when deciding whether to
use coprocessor 0 names. In that case, also check for ",H" selectors.
gas/
* config/tc-mips.c (validate_mips_insn, validate_micromips_insn)
(mips_ip): Remove "+D" and "+T" handling.
gas/testsuite/
* gas/mips/lb.d, gas/mips/sb.d: Use coprocessor register names
for LWC0 and SWC0.
* mips.h: Fix comment for "1": it is now STYPE rather than SHAMT.
Use "source" rather than "destination" for microMIPS "G".
gas/
* config/tc-mips.c (validate_mips_insn): Use STYPE rather than SHAMT.
2013-06-08 Catherine Moore <clm@codesourcery.com>
* config/tc-mips.c (is_opcode_valid): Build ASE mask.
(is_opcode_valid_16): Pass ase value to opcode_is_member.
(append_insn): Change INSN_xxxx to ASE_xxxx.
include/
2013-06-08 Catherine Moore <clm@codesourcery.com>
* opcode/mips.h (mips_opcode): Add ase field.
(INSN_ASE_MASK): Delete.
(INSN_DSP): Rename to ASE_DSP. Provide new value.
(INSN_DSPR2): Rename to ASE_DSPR2. Provide new value.
(INSN_MCU): Rename to ASE_MCU. Provide new value.
(INSN_MDMX): Rename to ASE_MDMX. Provide new value.
(INSN_MIPS3d): Rename to ASE_MIPS3D. Provide new value.
(INSN_MT): Rename to ASE_MT. Provide new value.
(INSN_SMARTMIPS): Rename to ASE_SMARTMIPS. Provide new value.
(INSN_VIRT): Rename to ASE_VIRT. Provide new value.
(INSN_VIRT64): Rename to ASE_VIRT64. Provide new value.
(opcode_is_member): Add ase argument. Check ase.
opcodes/
2013-06-08 Catherine Moore <clm@codesourcery.com>
Richard Sandiford <rdsandiford@googlemail.com>
* micromips-opc.c (D32, D33, MC): Update definitions.
(micromips_opcodes): Initialize ase field.
* mips-dis.c (mips_arch_choice): Add ase field.
(mips_arch_choices): Initialize ase field.
(set_default_mips_dis_options): Declare and setup mips_ase.
* mips-opc.c (M3D, SMT, MX, IVIRT, IVIRT64, D32, D33, D64,
MT32, MC): Update definitions.
(mips_builtin_opcodes): Initialize ase field.
* doc/binutils.texi: Document -Mvirt disassembler option.
gas/ChangeLog:
* config/tc-mips.c (struct mips_set_options): New ase_virt field.
(mips_opts): Update for the new field.
(file_ase_virt): New variable.
(ISA_SUPPORTS_VIRT_ASE): New macro.
(ISA_SUPPORTS_VIRT64_ASE): New macro.
(MIPS_CPU_ASE_VIRT): New define.
(is_opcode_valid): Handle ase_virt.
(macro_build): Handle "+J".
(validate_mips_insn): Likewise.
(mips_ip): Likewise.
(enum options): Add OPTION_VIRT and OPTION_NO_VIRT.
(md_longopts): Add mvirt and mnovirt
(md_parse_option): Handle OPTION_VIRT and OPTION_NO_VIRT.
(mips_after_parse_args): Handle ase_virt field.
(s_mipsset): Handle "virt" and "novirt".
(mips_elf_final_processing): Add a comment about virt ASE might need a new flag.
(md_show_usage): Print out the usage of -mvirt and mno-virt options.
* doc/c-mips.texi: Document -mvirt and -mno-virt.
Document ".set virt" and ".set novirt".
gas/testsuite/ChangeLog:
* gas/mips/mips.exp: Run virt and virt64 testcases.
* gas/mips/virt.d: New file.
* gas/mips/virt.s: New file.
* gas/mips/virt64.d: New file.
* gas/mips/virt64.s: New file.
include/opcode/ChangeLog:
* mips.h (OP_MASK_CODE10): Correct definition.
(OP_SH_CODE10): Likewise.
Add a comment that "+J" is used now for OP_*CODE10.
(INSN_ASE_MASK): Update.
(INSN_VIRT): New macro.
(INSN_VIRT64): New macro
opcodes/ChangeLog:
* mips-dis.c (mips_arch_choices): Add INSN_VIRT to mips32r2 .
Add INSN_VIRT and INSN_VIRT64 to mips64r2.
(parse_mips_dis_option): Handle the virt option.
(print_insn_args): Handle "+J".
(print_mips_disassembler_options): Print out message about virt64.
* mips-opc.c (IVIRT): New define.
(IVIRT64): New define.
(mips_builtin_opcodes): Add dmfgc0, dmtgc0, hypcall, mfgc0, mtgc0,
tlbgr, tlbgwi, tlbginv, tlbginvf, tlbgwr, tlbgp VIRT instructions.
Move rfe to the bottom as it conflicts with tlbgp.
