* config/tc-mips.c (macro2): Implement rotates by zero using shifts
by zero.
[gas/testsuite]
* gas/mips/rol.s: Add rotate by zero tests.
* gas/mips/rol.d: Update accordingly.
* gas/mips/rol64.d: Expect rotates by zero to use dsrl.
* gas/d30v/guard-debug.d: Use -gstabs rather than -g.
* gas/elf/ehopt0.s: Don't use "$" in labels.
* gas/ieee-fp/x930509a.exp: Don't test c30.
* gas/m68hc11/malis.d: Adjust -I so that test runs when not building
in source dir.
* gas/mri/mri.exp: Don't run on "m68hc*".
* gas/sh/basic.exp (do_fp): Match LE too.
(pcrel-coff): Run this version for "sh*-pe*" and rename "sh*-hms" to
"sh*-rtems".
* gas/sh/pcrel-coff.d: Add -EB to objdump flags.
* gas/vtable/vtable.exp: Don't run on linuxecoff. setup_xfail in
preference to not running on ELF targets that might one day pass.
Add more xfails. Add more targets to the REL list.
* gas/m68hc11/insns12.s: New file to test specific 68HC12 insns.
* gas/m68hc11/insns12.d: New file.
* gas/m68hc11/branchs12.s: New test.
* gas/m68hc11/branchs12.d: New test.
* gas/m68hc11/all_insns.d: Dump the relocs to verify that they
are against symbols and not sections (for linker relaxation).
* gas/m68hc11/insns-dwarf2.d: Likewise.
* gas/m68hc11/insns.d: Likewise.
* gas/m68hc11/lbranch.d: Likewise.
* gas/m68hc11/lbranch-dwarf2.d: Likewise.
* gas/m68hc11/opers12.d: Likewise.
* gas/m68hc11/opers12-dwarf2.d: Likewise.
* config/tc-mips.c (mips_ip): Don't work out the value of
constant %hi()s here.
[gas/testsuite/]
* gas/mips/elf-consthilo.[sd]: New test.
* gas/mips/mips.exp: Run it.
immediate offset in "dla" and "la" expansions.
* gas/mips/empic.d: Treat "addiu" and "daddiu" as equivalent when
$0 is source.
* mips-opc.c (mips_builtin_opcodes): Remove "dla" and "la" as
aliases to "daddiu" and "addiu".
* config/tc-mips.c (tc_gen_reloc): Extend GP-relative addend
handling to BFD_RELOC_MIPS16_GPREL.
[gas/testsuite/]
* gas/mips/elf-rel6.[sd]: New test.
* gas/mips/mips.exp: Run it.
2002-07-26 Chris Demetriou <cgd@broadcom.com>
* gas/mips/elf_ase_mips16.d: New file to test ELF MIPS16 ASE marking.
* gas/mips/elf_ase_mips16.s: Likewise.
* gas/mips/mips.exp: Run the new test.
[ ld/testsuite/ChangeLog ]
2002-07-26 Chris Demetriou <cgd@broadcom.com>
* ld-mips-elf/mips16-1.d: Check that ASE flag is actually set.
* doc/c-mips.texi: Remove -mcpu. Document -mabi.
* configure.in (MIPS_CPU_STRING_DEFAULT): New configuration macro.
(USE_E_MIPS_ABI_O32, MIPS_DEFAULT_64BIT): New configuration macros.
* configure, config.in: Regenerate.
* config/tc-mips.c (file_mips_abi): Rename to mips_abi.
(mips_set_options): Remove "abi" field.
(mips_opts): Update accordingly. Replace all uses of mips_opts.abi
with mips_abi.
(mips_cpu): Remove.
(mips_arch_string, mips_arch_info): New vars.
(mips_tune_string, mips_tune_info): New vars.
(ABI_NEEDS_32BIT_REGS, ABI_NEEDS_64BIT_REGS): New macros.
(HAVE_32BIT_GPRS, HAVE_32BIT_FPRS): Don't check the ABI.
(mips_isa_to_str, mips_cpu_to_str): Remove.
(mips_ip): If the selected architecture is a generic ISA rather
than a processor, only mention the ISA level in error messages.
(OPTION_MCPU): Remove.
(OPTION_FP64): New.
(md_longopts): Add -mfp64, remove -mcpu.
(mips_set_option_string): New fn.
(md_parse_option): Make -mipsN update file_mips_isa rather than
mips_opts.isa. Use mips_set_option_string to set -march or -mtune.
Don't let -mgp32 and -mfp32 change the ABI.
(show): Move to end of file. Constify string argument.
(md_show_usage): Move to the end of the file. Read available
architectures from mips_cpu_info_table.
(mips_set_architecture): New fn.
(mips_after_parse_args): Rework. Remove -mcpu handling. -mipsN
is an alias for -march=mipsN. Don't change the ABI based on other
flags. Infer the register size from the ABI as well as the
architecture. Complain about more conflicting arguments.
Unify logic with GCC.
(s_mipsset): Don't change the ABI.
(mips_elf_final_processing): Check USE_E_MIPS_ABI_O32.
(mips_cpu_info_table): Remove Generic-MIPS* entries, keeping just
"mipsN"-type entries. Remove entries that vary only in the
manufacturer's prefix, or that have "000" replaced by "k".
Remove TARGET_CPU entries. Make r2000 entry use CPU_R3000.
(mips_strict_matching_cpu_name_p, mips_matching_cpu_name_p): New fns.
(mips_parse_cpu): New fn.
(mips_cpu_info_from_name, mips_cpu_info_from_cpu): Remove.
(mips_cpu_info_from_isa): Minor formatting tweak.
[gas/testsuite]
* gas/mips/mips-gp32-fp64.d,
* gas/mips/mips-gp32-fp64-pic.d: Add -mfp64.
2002-05-31 Chris G. Demetriou <cgd@broadcom.com>
Ed Satterthwaite <ehs@broadcom.com>
* mips-opc.c: Add support for SB-1 MDMX subset and extensions.
[ gas/testsuite/ChangeLog ]
2002-05-31 Chris G. Demetriou <cgd@broadcom.com>
* gas/mips/sb1-ext-mdmx.s: New file.
* gas/mips/sb1-ext-mdmx.d: Likewise.
* gas/mips/mips.exp: Run new "sb1-ext-mdmx" test.
2002-05-30 Chris G. Demetriou <cgd@broadcom.com>
Ed Satterthwaite <ehs@broadcom.com>
* config/tc-mips.c (mips_set_options): New "ase_mdmx" member.
(mips_opts): Initialize "ase_mdmx" member.
(file_ase_mdmx): New variable.
(CPU_HAS_MDMX): New macro.
(md_begin): Initialize mips_opts.ase_mdmx and file_ase_mdmx
based on command line options and configuration defaults.
(macro_build): Note in comment that use of MDMX in macros is
not currently allowed.
(validate_mips_insn): Add support for the "O", "Q", "X", "Y", and
"Z" MDMX operand types.
(mips_ip): Accept MDMX instructions if mips_opts.ase_mdmx is set,
and add support for the "O", "Q", "X", "Y", and "Z" MDMX operand
types.
(OPTION_MDMX, OPTION_NO_MDMX, md_longopts, md_parse_option):
Add support for "-mdmx" and "-no-mdmx" options.
(OPTION_ELF_BASE): Move to accomodate new options.
(s_mipsset): Support ".set mdmx" and ".set nomdmx".
(mips_elf_final_processing): Set MDMX ASE ELF header flag if
file_ase_mdmx was set.
* doc/as.texinfo: Document -mdmx and -no-mdmx options.
* doc/c-mips.texi: Likewise, and document ".set mdmx" and ".set
nomdmx" directives.
[ gas/testsuite/ChangeLog ]
2002-05-30 Chris G. Demetriou <cgd@broadcom.com>
* gas/mips/mips64-mdmx.s: New file.
* gas/mips/mips64-mdmx.d: Likewise.
* gas/mips/mips.exp: Run new "mips64-mdmx" test.
[ include/opcode/ChangeLog ]
2002-05-30 Chris G. Demetriou <cgd@broadcom.com>
* mips.h (OP_SH_ALN, OP_MASK_ALN, OP_SH_VSEL, OP_MASK_VSEL)
(MDMX_FMTSEL_IMM_QH, MDMX_FMTSEL_IMM_OB, MDMX_FMTSEL_VEC_QH)
(MDMX_FMTSEL_VEC_OB, INSN_READ_MDMX_ACC, INSN_WRITE_MDMX_ACC)
(INSN_MDMX): New constants, for MDMX support.
(opcode character list): Add "O", "Q", "X", "Y", and "Z" for MDMX.
[ opcodes/ChangeLog ]
2002-05-30 Chris G. Demetriou <cgd@broadcom.com>
Ed Satterthwaite <ehs@broadcom.com>
* mips-dis.c (print_insn_arg): Add support for 'O', 'Q', 'X', 'Y',
and 'Z' formats, for MDMX.
(mips_isa_type): Add MDMX instructions to the ISA
bit mask for bfd_mach_mipsisa64.
* mips-opc.c: Add support for MDMX instructions.
(MX): New definition.
* mips-dis.c: Update copyright years to include 2002.
* gas/mips/mips-gp64-fp32.l: New file.
* gas/mips/mips-gp64-fp32.d: Use mips-gp64-fp32.l to check stderr
output.
* gas/mips/mips-gp64-fp64.l: New file.
* gas/mips/mips-gp64-fp64.d: Use mips-gp64-fp64.l to check stderr
output.
