bfd/
2016-04-05 Cupertino Miranda <cmiranda@synopsys.com>
* elf32-arc.c (name_for_global_symbol): Added assert to check for
symbol index.
(elf_arc_relocate_section): Added and changed asserts, validating
the synamic symbol index.
(elf_arc_finish_dynamic_symbol): Do not fill the dynamic
relocation if symbol has dynindx set to -1.
Always turn hidden and internal symbols which have a dynamic index into
local ones. This is required by the the ELF gABI[1]:
"A hidden symbol contained in a relocatable object must be either
removed or converted to STB_LOCAL binding by the link-editor when the
relocatable object is included in an executable file or shared object."
"An internal symbol contained in a relocatable object must be either
removed or converted to STB_LOCAL binding by the link-editor when the
relocatable object is included in an executable file or shared object."
The ELF linker usually respects this requirement, however in the case
where a dynamic symbol has been preallocated due to a reference of the
default export class aka visibility from the object being linked, and
then merged with a hidden or internal symbol definition from within the
same object, then the original export class is carried over to the
output dynamic symbol table, because while merging the generic ELF
linker only converts affected dynamic symbols to local when they are
defined or referenced by the object being linked and a dynamic object
involved in the link both at a time.
The dynamic symbol produced confuses then the dynamic loader at the run
time -- the hidden or internal export class is ignored and the symbol
follows preemption rules as with the default export class.
In the MIPS target it happens when `mips_elf_record_global_got_symbol'
creates a dynamic symbol when a call relocation is encountered.
Additionally if the undefined symbol referred by such a relocation does
specify the intended export class, then a local dynamic symbol is
created instead, which is harmless and allowed, but useless. Normally
no local dynamic symbols are created, except for a single dummy one at
the beginning.
Correct the problem by removing the extra check for a dynamic symbol
being defined or referenced by the object being linked and a dynamic
object involved in the link both at a time. The test cases included
cover the internal and hidden symbol cases, as well as a protected
symbol for a reference, the handling of which is unchanged by this fix.
Both cases described above are covered, that is where an internal or
hidden dynamic symbol is produced and where a local one is.
NB this change affects CRIS results where some symbols in the static
table produced in a final link are now converted from STV_HIDDEN to
STB_LOCAL. This happens whenever the `elf_backend_hide_symbol' handler
is called, so the affected symbols must have been chosen for entering
into the dynamic symbol table, except in these test cases no such symbol
table is produced. In fully linked binaries the static symbol table is
only used for debugging though, so such a change is fine.
References:
[1] "System V Application Binary Interface - DRAFT - 24 April 2001",
The Santa Cruz Operation, Inc., "Symbol Table",
<http://www.sco.com/developers/gabi/2001-04-24/ch4.symtab.html>
bfd/
PR ld/19908
* elflink.c (elf_link_add_object_symbols): Always turn hidden
and internal symbols which have a dynamic index into local
ones.
ld/
PR ld/19908
* testsuite/ld-cris/tls-e-20.d: Adjust for hidden symbol
handling fix.
* testsuite/ld-cris/tls-e-20a.d: Likewise.
* testsuite/ld-cris/tls-e-21.d: Likewise.
* testsuite/ld-cris/tls-e-23.d: Likewise.
* testsuite/ld-cris/tls-e-80.d: Likewise.
* testsuite/ld-cris/tls-gd-3h.d: Likewise.
* testsuite/ld-cris/tls-leie-19.d: Likewise.
* testsuite/ld-mips-elf/export-class-ref-lib.sd: New test.
* testsuite/ld-mips-elf/export-hidden-ref.sd: New test.
* testsuite/ld-mips-elf/export-internal-ref.sd: New test.
* testsuite/ld-mips-elf/export-protected-ref.sd: New test.
* testsuite/ld-mips-elf/export-class-ref-f0.s: New test source.
* testsuite/ld-mips-elf/export-class-ref-f1.s: New test source.
* testsuite/ld-mips-elf/export-class-ref-f2.s: New test source.
* testsuite/ld-mips-elf/mips-elf.exp: Run the new tests.
The libraries are never downloaded to the target for the first test
(test_insert_delete_modify), so the executable can't run properly.
I also added some with_test_prefix to help differentiate between the
different test case phases.
gdb/testsuite/ChangeLog:
* gdb.mi/mi-breakpoint-changed.exp: Add some with_test_prefix.
(test_insert_delete_modify): Call mi_load_shlibs before trying to
run.
PR 19803
* emultempl/pe.em (change_undef): New function. Encapsulates
duplicated code in pe_fixup_stdcalls and adds the newly defined
sym to the gc root list.
(pe_fixup_stdcall): Use the new function.
* pe-dll.c (process_def_file_and_drectve); Add alias of exported
symbol to gc root list.
PR 19872
bfd * dwarf2.c (parse_comp_unit): Skip warning about unrecognised
version number if the version is zero.
bin * dwarf.c (display_debug_aranges): Skip warning about unrecognised
version number if the version is zero.
In tc-arc.h we redefine constants that are also defined in the
include/opcode/arc.h header file. The problem is that changing one
without changing the other resulting in strange crashes.
We could comment both locations to stress the importance of remembering
to update the other location too, or we could just include the
opcode/arc.h header file into the assembler.
Given that other targets include their opcode/ARCH.h header file, and
only having a single definition, where possible, is usually the safest
solution, that's what I switch too with this commit.
gas/ChangeLog:
* config/tc-arc.h: Include 'opcode/arc.h'.
(MAX_INSN_ARGS): Delete.
(MAX_INSN_FLGS): Delete.
Providing declarations in tc.h points out that alpha wasn't properly marking
FLT_CHARS as const. We can also get rid of the confusing redefinition of
X_CHARS to mmix_x_chars. Finally we can get rid of some now redundant
declarations of these constants.
gas/ChangeLog:
2016-04-03 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
* config/tc-alpha.c: Const qualify FLT_CHARS.
* config/atof-ieee.c: Remove declarations of FLT_CHARS and EXP_CHARS.
* config/tc-cris.h: Likewise.
* expr.c: Likewise.
* config/tc-mmix.c (md_atof): Adjust comment.
* config/tc-mmix.h: Stop defining FLT_CHARS and EXP_CHARS as macros.
* tc.h: Declare FLT_CHARS and EXP_CHARS.
It needs a few more things to be const now.
gas/ChangeLog:
2016-04-03 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
* config/tc-score.c (s3_gen_reloc): Add const qualifiers.
* config/tc-score7.c (s7_gen_reloc): Likewise.
It is only ever assigned values in the enum, and it is passed to functions that
expect the argument's type to be the enum.
gas/ChangeLog:
2016-04-03 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
* config/tc-arm.c (do_t_branch): Change the type of reloc to
bfd_reloc_code_real_type.
Its not used for anything outside of md_assemble () so it doesn't need to be
extern. While we are there we can replace free () and xmalloc () with
XRESIZEVEC which should be faster.
gas/ChangeLog:
2016-04-03 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
* config/bfin-parse.y (current_inputline): Remove definition.
* config/tc-bfin.c (md_assemble): Simplify use of current_inputline.
Instead of canonicalizing the argument we can just use a case insensitive
compare.
gas/ChangeLog:
2016-04-03 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
* config/tc-avr.c (md_parse_option): Use strcasecmp () to compare
strings.
These files need AT_PHDR, which is defined in elf.h. If HAVE_GETAUXVAL
is set, it's implicitely included by sys/auxv.h. Include it manually
for the opposite case.
gdb/gdbserver/ChangeLog:
* linux-aarch64-ipa.c: Add <elf.h> include.
* linux-ppc-ipa.c: Add <elf.h> include.
* linux-s390-ipa.c: Add <elf.h> include.
This patch adds support for TYPE_CODE_ENUM values to be supplied
as right-hand side operand of the BINOP_REPEAT (@) operator. The
following should now work:
enum {
sz = 17
};
int
main ()
{
int arr[sz + 1] = { 0 };
return 0; /* line 9 here */
}
(gdb) b 9
(gdb) r
(gdb) p arr@sz
$1 = {0 <repeats 17 times>}
(gdb)
A couple of tests is also included in this patch to demonstrate that it is
working as intended.
gdb/Changelog:
2016-04-01 Artemiy Volkov <artemiyv@acm.org>
PR gdb/19820
* eval.c (evaluate_subexp_standard): Allow TYPE_CODE_ENUM to be
the type of BINOP_REPEAT's second operand.
gdb/testsuite/Changelog:
2016-04-01 Artemiy Volkov <artemiyv@acm.org>
PR gdb/19820
* gdb.base/printcmds.exp: Add artificial arrays tests.
Small spelling mistake in a #define, fixed in this commit.
gas/ChangeLog:
* config/tc-arc.h (MAX_FLAG_NAME_LENGHT): Rename to...
(MAX_FLAG_NAME_LENGTH): ...this.
(struct arc_flags): Update to use MAX_FLAG_NAME_LENGTH.
* config/tc-arc.c (tokenize_flags): Likewise.
This isn't perfect in checking whether libraries will be loaded since
elf_link_add_object_symbols doesn't recurse down DT_NEEDED links.
(That happens later in ld/emultempl/elf32.em after_open.) So in
effect this recursive check really only looks one level down the
DT_NEEDED tree. Which is enough for the most common case, and
libc.so/ld.so in particular.
PR 19886
* elflink.c (on_needed_list): Recursively check needed status.
(elf_link_add_object_symbols): Adjust.
These were introduced by 1cda151268
and a13c46966d . One is a simple
missing cast, the other is const usage on global function pointers
exported from IPA: in C++, consts are static, and thus won't be
exported from the DSO (the build error was because of non-applicable
visibility("default")).
gdb/gdbserver/ChangeLog:
* tracepoint.c (gdb_collect_ptr): Remove const qualifier.
(get_raw_reg_ptr): Likewise.
(get_trace_state_variable_value_ptr): Likewise.
(set_trace_state_variable_value_ptr): Likewise.
(initialize_tracepoint): Cast alloc_jump_pad_buffer result to
char *.
This test would fail without the previous gdb/jit.c fix:
(gdb) attach 23031
Attaching to program: .../build/gdb/testsuite/outputs/gdb.base/jit/jit-main, process 23031
[...]
207 WAIT_FOR_GDB; i = 0; /* gdb break here 1 */
(gdb) PASS: gdb.base/jit.exp: attach: one_jit_test-2: attach
set var wait_for_gdb = 0
(gdb) PASS: gdb.base/jit.exp: attach: one_jit_test-2: set var wait_for_gdb = 0
info function ^jit_function
All functions matching regular expression "^jit_function":
(gdb) FAIL: gdb.base/jit.exp: attach: one_jit_test-2: info function ^jit_function
gdb/testsuite/ChangeLog:
2016-03-31 Pedro Alves <palves@redhat.com>
PR gdb/19858
* gdb.base/jit-main.c: Include unistd.h.
(ATTACH): Define to 0 if not already defined.
(wait_for_gdb, mypid): New globals.
(WAIT_FOR_GDB): New macro.
(MAIN): Set an alarm. Store the process's pid. Wait for GDB at
some breakpoint locations.
* gdb.base/jit.exp (clean_reattach, continue_to_test_location):
New procedures.
(one_jit_test): Add REATTACH parameter, and handle it. Use
continue_to_test_location.
(top level): Test attach, and adjusts calls to one_jit_test.
This testcase compiles the same program and library differently
multiple times using the same file names. Make them unique, to make
it easier to debug test problems.
gdb/testsuite/ChangeLog:
2016-03-31 Pedro Alves <palves@redhat.com>
PR gdb/19858
* gdb.base/jit.exp (compile_jit_test): Add intro comment. Add
BINSUFFIX parameter, and handle it.
(top level): Adjust calls compile_jit_test.
Ref: https://sourceware.org/ml/gdb/2016-03/msg00023.html
GDB currently fails to fetch the list of already-registered JIT
modules on attach.
Nothing is calling jit_inferior_init, which is what is responsible for
walking the JIT object list at init time.
Despite the misleading naming, jit_inferior_created_hook ->
jit_inferior_init is only called when the inferior execs.
This regressed with the fix for PR gdb/13431 (03bef283c2):
https://sourceware.org/ml/gdb-patches/2012-02/msg00023.html which
removed the inferior_created (jit_inferior_created_observer)
observer.
Adding an inferior_created observer back fixes the issue.
In turn, this exposes a bug in jit_breakpoint_re_set_internal as well,
which is returning the wrong result when we already have the
breakpoint at the right address.
gdb/ChangeLog:
2016-03-31 Yichao Yu <yyc1992@gmail.com>
PR gdb/19858
* jit.c (jit_breakpoint_re_set_internal): Return 0 if we already
got the breakpoint at the right address.
(jit_inferior_created): New function.
(_initialize_jit): Install jit_inferior_created as
inferior_created observer.
Signed-off-by: Pedro Alves <palves@redhat.com>
gdb/gdbserver/ChangeLog:
2016-03-31 Wei-cheng Wang <cole945@gmail.com>
Marcin Kościelnicki <koriakin@0x04.net>
PR/17221
* linux-ppc-low.c (emit_insns): New function.
(__EMIT_ASM, _EMIT_ASM, EMIT_ASM): New macros.
(ppc_emit_prologue): New function.
(ppc_emit_epilogue): New function.
(ppc_emit_add): New function.
(ppc_emit_sub): New function.
(ppc_emit_mul): New function.
(ppc_emit_lsh): New function.
(ppc_emit_rsh_signed): New function.
(ppc_emit_rsh_unsigned): New function.
(ppc_emit_ext): New function.
(ppc_emit_zero_ext): New function.
(ppc_emit_log_not): New function.
(ppc_emit_bit_and): New function.
(ppc_emit_bit_or): New function.
(ppc_emit_bit_xor): New function.
(ppc_emit_bit_not): New function.
(ppc_emit_equal): New function.
(ppc_emit_less_signed): New function.
(ppc_emit_less_unsigned): New function.
(ppc_emit_ref): New function.
(ppc_emit_const): New function.
(ppc_emit_reg): New function.
(ppc_emit_pop): New function.
(ppc_emit_stack_flush): New function.
(ppc_emit_swap): New function.
(ppc_emit_stack_adjust): New function.
(ppc_emit_call): New function.
(ppc_emit_int_call_1): New function.
(ppc_emit_void_call_2): New function.
(ppc_emit_if_goto): New function.
(ppc_emit_goto): New function.
(ppc_emit_eq_goto): New function.
(ppc_emit_ne_goto): New function.
(ppc_emit_lt_goto): New function.
(ppc_emit_le_goto): New function.
(ppc_emit_gt_goto): New function.
(ppc_emit_ge_goto): New function.
(ppc_write_goto_address): New function.
(ppc_emit_ops_impl): New static variable.
(ppc64v1_emit_prologue): New function.
(ppc64v2_emit_prologue): New function.
(ppc64_emit_epilogue): New function.
(ppc64_emit_add): New function.
(ppc64_emit_sub): New function.
(ppc64_emit_mul): New function.
(ppc64_emit_lsh): New function.
(ppc64_emit_rsh_signed): New function.
(ppc64_emit_rsh_unsigned): New function.
(ppc64_emit_ext): New function.
(ppc64_emit_zero_ext): New function.
(ppc64_emit_log_not): New function.
(ppc64_emit_bit_and): New function.
(ppc64_emit_bit_or): New function.
(ppc64_emit_bit_xor): New function.
(ppc64_emit_bit_not): New function.
(ppc64_emit_equal): New function.
(ppc64_emit_less_signed): New function.
(ppc64_emit_less_unsigned): New function.
(ppc64_emit_ref): New function.
(ppc64_emit_const): New function.
(ppc64v1_emit_reg): New function.
(ppc64v2_emit_reg): New function.
(ppc64_emit_pop): New function.
(ppc64_emit_stack_flush): New function.
(ppc64_emit_swap): New function.
(ppc64v1_emit_call): New function.
(ppc64v2_emit_call): New function.
(ppc64v1_emit_int_call_1): New function.
(ppc64v2_emit_int_call_1): New function.
(ppc64v1_emit_void_call_2): New function.
(ppc64v2_emit_void_call_2): New function.
(ppc64_emit_if_goto): New function.
(ppc64_emit_eq_goto): New function.
(ppc64_emit_ne_goto): New function.
(ppc64_emit_lt_goto): New function.
(ppc64_emit_le_goto): New function.
(ppc64_emit_gt_goto): New function.
(ppc64_emit_ge_goto): New function.
(ppc64v1_emit_ops_impl): New static variable.
(ppc64v2_emit_ops_impl): New static variable.
(ppc_emit_ops): New function.
(linux_low_target): Wire in ppc_emit_ops.
gdb/gdbserver/ChangeLog:
2016-03-31 Wei-cheng Wang <cole945@gmail.com>
Marcin Kościelnicki <koriakin@0x04.net>
PR/17221
* Makefile.in: Add powerpc-*-ipa.o
* configure.srv: Add ipa_obj for powerpc*-linux.
* linux-ppc-ipa.c: New file.
* linux-ppc-low.c: Added linux-ppc-tdesc.h, ax.h, tracepoint.h
includes.
(PPC_FIELD): New macro.
(PPC_SEXT): New macro.
(PPC_OP6): New macro.
(PPC_BO): New macro.
(PPC_LI): New macro.
(PPC_BD): New macro.
(init_registers_*): Move prototype to linux-ppc-tdesc.h.
(tdesc_*): Move declaration to linux-ppc-tdesc.h.
(ppc_get_hwcap): Rename to ppc_get_auxv and add type parameter.
(ppc_get_thread_area): New function.
(is_elfv2_inferior): New function.
(gen_ds_form): New function.
(GEN_STD): New macro.
(GEN_STDU): New macro.
(GEN_LD): New macro.
(GEN_LDU): New macro.
(gen_d_form): New function.
(GEN_ADDI): New macro.
(GEN_ADDIS): New macro.
(GEN_LI): New macro.
(GEN_LIS): New macro.
(GEN_ORI): New macro.
(GEN_ORIS): New macro.
(GEN_LWZ): New macro.
(GEN_STW): New macro.
(GEN_STWU): New macro.
(gen_xfx_form): New function.
(GEN_MFSPR): New macro.
(GEN_MTSPR): New macro.
(GEN_MFCR): New macro.
(GEN_MTCR): New macro.
(GEN_SYNC): New macro.
(GEN_LWSYNC): New macro.
(gen_x_form): New function.
(GEN_OR): New macro.
(GEN_MR): New macro.
(GEN_LWARX): New macro.
(GEN_STWCX): New macro.
(GEN_CMPW): New macro.
(gen_md_form): New function.
(GEN_RLDICL): New macro.
(GEN_RLDICR): New macro.
(gen_i_form): New function.
(GEN_B): New macro.
(GEN_BL): New macro.
(gen_b_form): New function.
(GEN_BNE): New macro.
(GEN_LOAD): New macro.
(GEN_STORE): New macro.
(gen_limm): New function.
(gen_atomic_xchg): New function.
(gen_call): New function.
(ppc_relocate_instruction): New function.
(ppc_install_fast_tracepoint_jump_pad): New function.
(ppc_get_min_fast_tracepoint_insn_len): New function.
(ppc_get_ipa_tdesc_idx): New function.
(the_low_target): Wire in the new functions.
(initialize_low_arch) [!__powerpc64__]: Don'it initialize 64-bit
tdescs.
* linux-ppc-tdesc.h: New file.
Targets may have various requirements on the required location of the jump
pad area. Currently IPA allocates it at the lowest possible address,
so that it is reachable by branches from the executable. However, this
fails on powerpc, which has executable link address (0x10000000) much
larger than branch reach (+/- 32MiB).
This makes jump pad buffer allocation a target hook instead. The current
implementations are as follows:
- i386 and s390: Branches can reach anywhere, so just mmap it. This
avoids the linear search dance.
- x86_64: Branches have +/-2GiB of reach, and executable is loaded low,
so just call mmap with MAP_32BIT. Likewise avoids the linear search.
- aarch64: Branches have +-128MiB of reach, executable loaded at 4MiB.
Do a linear search from 4MiB-size downwards to page_size.
- s390x: Branches have +-4GiB of reach, executable loaded at 2GiB.
Do like on aarch64.
gdb/gdbserver/ChangeLog:
* linux-aarch64-ipa.c: Add <sys/mman.h> and <sys/auxv.h> includes.
(alloc_jump_pad_buffer): New function.
* linux-amd64-ipa.c: Add <sys/mman.h> include.
(alloc_jump_pad_buffer): New function.
* linux-i386-ipa.c (alloc_jump_pad_buffer): New function.
* linux-s390-ipa.c: Add <sys/mman.h> and <sys/auxv.h> includes.
(alloc_jump_pad_buffer): New function.
* tracepoint.c (getauxval) [!HAVE_GETAUXVAL]: New function.
(initialize_tracepoint): Delegate to alloc_jump_pad_buffer.
* tracepoint.h (alloc_jump_pad_buffer): New prototype.
(getauxval) [!HAVE_GETAUXVAL]: New prototype.
Some operands accidentally had the ARC_OPERAND_NCHK flag (due to copy &
paste mistake), meaning the operand value was skipping the overflow
check before being inserted. This commit removes the unwanted flags.
opcodes/ChangeLog:
* arc-opc.c (arc_operands): Fix operand flags for NPS_R_DST, and
NPS_R_SRC1.
When gdb is started in MI mode, the output of gdb.execute
command is in MI-format in case when it is executed from python stop
handler while for all other cases the output is in console-format.
To assure consistent output format, this is fixed by using the console
format for all python gdb command executions.
PR python/19743
gdb/ChangeLog:
2016-03-31 Catalin Udma <catalin.udma@freescale.com>
PR python/19743
* python/python.c (execute_gdb_command): Use console uiout
when executing gdb command.
* utils.c (restore_ui_out_closure): New structure.
(do_restore_ui_out): New function.
(make_cleanup_restore_ui_out): Likewise.
* utils.h (make_cleanup_restore_ui_out): Declare.
gdb/testsuite/ChangeLog:
2016-03-31 Catalin Udma <catalin.udma@freescale.com>
PR python/19743
* gdb.python/py-mi-events-gdb.py: New file.
* gdb.python/py-mi-events.c: New file.
* gdb.python/py-mi-events.exp: New file.
Signed-off-by: Catalin Udma <catalin.udma@freescale.com>
This removes support for:
| target | source |
|-------------------+-----------------------|
| target m32rsdi | gdb/remote-m32r-sdi.c |
| target mips | gdb/remote-mips.c |
| target pmon | gdb/remote-mips.c |
| target ddb | gdb/remote-mips.c |
| target rockhopper | gdb/remote-mips.c |
| target lsi | gdb/remote-mips.c |
That is:
- Remote M32R debugging over SDI.
- Debugging boards using the MIPS remote debugging protocol
over a serial line, PMON, and a few variants.
These are the last non-"target remote" remote targets in the tree, if
you don't count "target sim".
Refs:
https://sourceware.org/ml/gdb/2016-03/msg00004.htmlhttps://sourceware.org/ml/gdb-patches/2016-03/msg00580.html
gdb/ChangeLog:
2016-03-31 Pedro Alves <palves@redhat.com>
* NEWS: Mention that support for "target m32rsdi", "target mips",
"target pmon", "target ddb", "target rockhopper", and "target lsi"
was removed.
* Makefile.in (ALL_TARGET_OBS): Remove remote-m32r-sdi.o and
remote-mips.o.
(ALLDEPFILES): Remove remote-m32r-sdi.c and remote-mips.c.
* configure.tgt: Remove all references to remote-m32r-sdi.o and
remote-mips.o.
* mips-tdep.c (deprecated_mips_set_processor_regs_hack): Delete
function.
* mips-tdep.h (deprecated_mips_set_processor_regs_hack): Delete
declaration.
* remote-m32r-sdi.c, remote-mips.c: Delete files.
* symfile.c (generic_load, generic_load): Remove comments.
gdb/doc/ChangeLog:
2016-03-31 Pedro Alves <palves@redhat.com>
* gdb.texinfo (M32R/SDI): Delete node.
(MIPS Embedded): Remove references to the MIPS remote debugging
protocol, PMON and variants, and the associated commands.
Xtensa uses it in several macros passing it a literal string, so its convenient
for the argument type to be const char *. However some of the code in
symbols.c seems to assume tc_canonicalize_symbol_name () will return a non
const pointer, and some other target's implementations even modify the
argument, so it seems best to return a char * which means casting away const on
the argument when we return it instead of another string.
gas/ChangeLog:
2016-03-31 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
* config/tc-xtensa.c (struct rename_section_struct): Make old_name
const.
(xtensa_section_rename): Make argument type const char *.
* config/tc-xtensa.h (xtensa_section_rename): Adjust.
parse_ldconst () takes a char ** as a in / out argument, and sometimes points
args[0] to a constant string. Then in some cases after parse_ldconst ()
returns md_assemble () twiddles the contents of arg[0]. So it seems like
it would take some work to avoid these casts, and its not really clear
that work is worth it.
gas/ChangeLog:
2016-03-31 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
* config/tc-i960.c (parse_ldconst): Cast to char * when assigning to
args[0].
For these targets its not clear how md_assemble can usefully be split up so
that part can take const char *. There is also a fair number of targets that
need md_assemble () to take a char *, so we can't easily make the argument
const. So since there isn't many callers it seems easiest to just add a couple
of casts.
gas/ChangeLog:
2016-03-31 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
* config/tc-m32c.c (m32c_md_end): cast the argument to md_assemble to
char *.
(m32c_indirect_operand): Likewise.
* config/tc-nds32.c (do_pseudo_b): Likewise.
(do_pseudo_bal): Likewise.
(do_pseudo_ls_bhw): Likewise.
get_symbol_name () returns a char * in a out arg, which means we need to cast
to assign a literal to the variable passed to get_symbol_name (). It seems
like better APIs than get_symbol_name () could be provided, but that seems like
a fair amount of work so just casting seems to be the betterthing to do for
now.
gas/ChangeLog:
2016-03-31 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
* config/tc-ia64.c (md_assemble): Add temporary variable to pass to
get_symbol_name ().
* config/tc-sparc.c (s_register): Cast a literal to char * in
assignment.
