2014-03-10 Sasa Stankovic <Sasa.Stankovic@imgtec.com>
gold/
* output.cc (Output_data_dynamic::Dynamic_entry::write):
Get the value of DYNAMIC_CUSTOM dynamic entry.
* output.h (Output_data_dynamic::add_custom): New function.
(Dynamic_entry::Dynamic_entry): New constructor for DYNAMIC_CUSTOM
dynamic entry.
(enum Dynamic_entry::Classification): Add DYNAMIC_CUSTOM.
* target.h (Target::dynamic_tag_custom_value): New function.
(Target::do_dynamic_tag_custom_value): New function.
2014-03-10 Sasa Stankovic <Sasa.Stankovic@imgtec.com>
gold/
* symtab.cc (Symbol_table::set_dynsym_indexes): Allow a target to set
dynsym indexes.
* target.h (Target::has_custom_set_dynsym_indexes): New function.
(Target::do_has_custom_set_dynsym_indexes): New function.
(Target::set_dynsym_indexes): New function.
(Target::do_set_dynsym_indexes): New function.
When evaluating an expression, if it is of a tagged type, GDB reads
the tag in memory and deduces the full view. At parsing time, however,
this operation is done only in the case of OP_VAR_VALUE. ptype does
not go through a full evaluation of expressions so it may return some
odd results:
(gdb) print c.menu_name
$1 = 0x0
(gdb) ptype $
type = system.strings.string_access
(gdb) ptype c.menu_name
type = <void>
This change removes this peculiarity by extending the tag resolution
to UNOP_IND and STRUCTOP_STRUCT. As in the case of OP_VAR_VALUE, this
implies switching from EVAL_AVOID_SIDE_EFFECTS to EVAL_NORMAL when a
tagged type is dereferenced.
gdb/
* ada-lang.c (ada_evaluate_subexp): Resolve tagged types to
full view in the case of UNOP_IND and STRUCTOP_STRUCT.
gdb/testsuite/
* gdb.ada/tagged_access: New testcase.
This function is for simple breakpoint. So I post a patch to remove "hardware".
Thanks,
Hui
2014-03-10 Hui Zhu <hui@codesourcery.com>
* target.h (target_insert_breakpoint): Remove "hardware" from its
comments.
Similar to the powerpc64 patch, this improves overflow checking in
elf32-ppc.c. Many reloc "howto" entries needed fixes, some just
cosmetic.
The patch also fixes the R_PPC_VLE_SDA21 reloc application code, which
was horribly broken. In fact, it may still be broken since Power ISA
2.07 says e_li behaves as
RT <- EXTS(li20 1:4 || li20 5:8 || li20 0 || li20 9:19)
where li20 is a field taken from bits 17..20, 11..15, 21..31 of the
instruction. Freescale VLEPEM says differently, and I assume
correctly, that
RT <- EXTS(li20 0:3 || li20 4:8 || li20 9:19)
The VLE_SDA21 relocation description matches this too.
Now the VLE_SDA21 relocation specifies in the case where e_addi16 is
converted to e_li for symbols in .PPC.EMB.sdata0 or .PPC.EMB.sbss0
(no base register), that the field is restricted to 16 bits, with the
sign bit being propagated to the top 4 bits. I don't see the sense in
restricting the value like this, so have allowed the full 20 bit
signed value. This of course is compatible with the reloc description
in that values in the 16 bit signed range will result in exactly the
same insn field as when the reloc description is followed to the
letter.
* elf32-ppc.c (ppc_elf_howto_raw): Correct overflow check for
many relocations. Correct bitsize and rightshift too for a number
of VLE relocs. Describe R_PPC_VLE_SDA21 and R_PPC_VLE_SDA21_LO.
Correct dst_mask on R_PPC_VLE_SDA21_LO.
(ppc_elf_vle_split16): Tidy, delete unnecessary prototype.
(ppc_elf_relocate_section): Modify overflow test for 16-bit
fields in instructions to signed/unsigned according to whether
the field takes a signed or unsigned value. Tidy vle split16 code.
Correct R_PPC_VLE_SDA21 and R_PPC_VLE_SDA21_LO handling.
R_PPC64_ADDR16 is used in three contexts:
- .short data relocation
- 16-bit signed insn fields, eg. addi
- 16-bit unsigned insn fields, eg. ori
In the first case we want to allow both signed and unsigned 16-bit
values, the latter two ought to error if the field exceeds the range
of values allowed for 16-bit signed and unsigned integers
respectively. These conflicting requirements meant that ld had to
choose the least restrictive overflow checks, and thus it is possible
to construct testcases where an addi field overflows but is not
reported by ld. Many relocations dealing with 16-bit insn fields have
this problem. What's more, some relocations that are only ever used
for signed fields of instructions woodenly copied the lax overflow
checking of R_PPC64_ADDR16.
bfd/
* elf64-ppc.c (ppc64_elf_howto_raw): Use complain_overflow_signed
for R_PPC64_ADDR14, R_PPC64_ADDR14_BRTAKEN, R_PPC64_ADDR14_BRNTAKEN,
R_PPC64_SECTOFF, R_PPC64_ADDR16_DS, R_PPC64_SECTOFF_DS,
R_PPC64_REL16 entries. Use complain_overflow_dont for R_PPC64_TOC.
(ppc64_elf_relocate_section): Modify overflow test for 16-bit
fields in instructions to signed/unsigned according to whether
the field takes a signed or unsigned value.
gold/
* powerpc.cc (Powerpc_relocate_functions::Overflow_check): Add
CHECK_UNSIGNED, CHECK_LOW_INSN, CHECK_HIGH_INSN.
(Powerpc_relocate_functions::has_overflow_unsigned): New function.
(Powerpc_relocate_functions::has_overflow_bitfield,
overflowed): Use the above.
(Target_powerpc::Relocate::relocate): Correct overflow checking
for a number of relocations. Modify overflow test for 16-bit
fields in instructions to signed/unsigned according to whether
the field takes a signed or unsigned value.
* dwarf2read.c (read_cutu_die_from_dwo): Fix function comment.
Remove unused local comp_dir_attr. Assert exactly one of
stub_comp_unit_die, stub_comp_dir is non-NULL.
Expand a bit the comments to answer some questions I had when looking
at why a target of mine would not have some default methods set.
gdb/ChangeLog:
* target.h (complete_target_initialization, add_target):
Add comment.
So that all native targets inherit a single "superclass".
Target methods that are set to or do the same as inf-child.c's are
removed.
Tested by cross building on Fedora 17.
gdb/
2014-03-07 Pedro Alves <palves@redhat.com>
* go32-nat.c: Include inf-child.h.
(go32_ops): Delete global.
(go32_close, go32_detach, go32_prepare_to_store, go32_can_run):
Delete methods.
(go32_create_inferior): Push the passed in target pointer instead
of referencing go32_ops.
(init_go32_ops): Delete function. Moved parts to _initialize_go32_nat.
(go32_target): New function, based on init_go32_ops, but inherit
inf_child_target.
(_initialize_go32_nat): Use go32_target. Move parts of
init_go32_ops here.
I noticed GDB was failing to enable threading support for 32-bit AIX
cores. I traced it to failure to read variables from libpthreads.a.
The issue is that data for that library is loaded at a high address,
and bfd is sign extending the section addresses:
(gdb) info files
Symbols from "/home/palves/crash".
Local core dump file:
`/home/palves/core', file type aixcoff-rs6000.
0x2ff22000 - 0x2ff23000 is .stack
0x20000000 - 0x200316e0 is .data
0x20000e90 - 0x200016c0 is .data
0xfffffffff0254000 - 0xfffffffff0297920 is .data
0xfffffffff07b46a8 - 0xfffffffff07b47c8 is .data
0xfffffffff0298000 - 0xfffffffff029bfcc is .data
0xfffffffff06dafe0 - 0xfffffffff07b3838 is .data
Local exec file:
`/home/palves/crash', file type aixcoff-rs6000.
Entry point: 0x20001394
0x10000150 - 0x10000e90 is .text
0x20000e90 - 0x2000149c is .data
0x2000149c - 0x200016c0 is .bss
0xd053b124 - 0xd053e15f is .text in /usr/lib/libpthreads.a(shr_comm.o)
0xf0254000 - 0xf0297920 is .data in /usr/lib/libpthreads.a(shr_comm.o)
0xf0254450 - 0xf0297920 is .bss in /usr/lib/libpthreads.a(shr_comm.o)
0xd053a280 - 0xd053aabe is .text in /usr/lib/libcrypt.a(shr.o)
0xf07b46a8 - 0xf07b47c8 is .data in /usr/lib/libcrypt.a(shr.o)
0xf07b47c8 - 0xf07b47c8 is .bss in /usr/lib/libcrypt.a(shr.o)
0xd04fb180 - 0xd053917e is .text in /usr/lib/libpthreads.a(shr_xpg5.o)
0xf0298000 - 0xf029bfcc is .data in /usr/lib/libpthreads.a(shr_xpg5.o)
0xf029bf64 - 0xf029bfcc is .bss in /usr/lib/libpthreads.a(shr_xpg5.o)
0xd0100900 - 0xd04fa39c is .text in /usr/lib/libc.a(shr.o)
0xf06dafe0 - 0xf07b3838 is .data in /usr/lib/libc.a(shr.o)
0xf0751e94 - 0xf07b3838 is .bss in /usr/lib/libc.a(shr.o)
Notice:
...
0xfffffffff0298000 - 0xfffffffff029bfcc is .data
...
Those are the bfd section start/end addresses. It't not visible here:
...
0xf0298000 - 0xf029bfcc is .data in /usr/lib/libpthreads.a(shr_xpg5.o)
...
... just because GDB trims that number to 32-bit when printing.
GDB then fails to find the memory for libpthreads.a variables in the
core, and falls back to reading it directly from the executable (which
yields the values as originally initialized in the code).
E.g.:
(gdb) p &__n_pthreads
$2 = (<data variable, no debug info> *) 0xf074fda8 <__n_pthreads>
(gdb) p __n_pthreads
$1 = -1
That should have returned 2 instead of -1.
bfd/
2014-03-07 Pedro Alves <palves@redhat.com>
* rs6000-core.c (rs6000coff_core_p): Cast pointers to bfd_vma
through ptr_to_uint instead of through long.
ld/testsuite/
* ld-arm/gc-hidden-1.d: Remove target, add not-target to match
other ELF-only tests in this directory. Loosen regexps so they
don't care what the exact addresses are.
Some updates where needed after the minimal symbol handling got changed
a little. This patch makes those changes.
gdb/ChangeLog:
* sol-thread.c: #include "symtab.h", "minsym.h" and "objfiles.h".
(ps_pglobal_lookup): Use BMSYMBOL_VALUE_ADDRESS instead of
SYMBOL_VALUE_ADDRESS.
(info_cb): MSYMBOL_PRINT_NAME instead of SYMBOL_PRINT_NAME.
This patch is to remove parameter optional_p as it is always true,
in order to simplify get_tracepoint_by_number.
'optional_p' was added by this change,
1999-11-18 Tom Tromey <tromey@cygnus.com>
* tracepoint.h (get_tracepoint_by_number): Updated
declaration.
* tracepoint.c (trace_pass_command): Better error message.
Fixed logic when `all' not specified.
(get_tracepoint_by_number): Added `optional_p' argument. Fixed
all callers.
but after this patch,
FYI: remove `static's from cli-utils.c
https://sourceware.org/ml/gdb-patches/2011-03/msg00636.html
'optional_p' passed to get_tracepoint_by_number become always true.
gdb:
2014-03-06 Yao Qi <yao@codesourcery.com>
* breakpoint.c (get_tracepoint_by_number): Remove argument
optional_p. All callers updated. Adjust comments. Update
output message.
* breakpoint.h (get_tracepoint_by_number): Update declaration.
In GDB mainline, the error message for goto-bookmark
isn't perfect.
(gdb) goto-bookmark 1.1
goto-bookmark: no bookmark found for ''.
This patch tweaks the error message by checking the return value of
get_number. With patch applied, it becomes:
(gdb) goto-bookmark 1.1
goto-bookmark: invalid bookmark number '1.1'.
gdb:
2014-03-06 Yao Qi <yao@codesourcery.com>
* reverse.c (goto_bookmark_command): Add local 'p'. Emit error
early if get_number returns zero. Use 'p' instead of 'args'.
Hi,
GDB prints two warnings in one single line, as below:
(gdb) p 1.2
$1 = 1.2
(gdb) enable $1.2
History value must have integer type.Bad breakpoint number '$1'
This patch adds '\n' at the end of message.
gdb:
2014-03-06 Yao Qi <yao@codesourcery.com>
* cli/cli-utils.c (get_number_trailer): Add '\n' at the end of
message.
This patch fixes PR16508, which is about MI "-trace-find frame-number 0"
behaves differently from CLI "tfind 0". In CLI, we check both
status->running and status->filename, but in MI, we only check
status->running, which looks wrong to me. This patch moves the code
of checking to a new function check_trace_running, and use it in
both CLI and MI.
This patch also adds a test case pr16508.exp, which fails without this
fix, and passes with the fix applied.
FAIL: gdb.trace/pr16508.exp: interpreter-exec mi "-trace-find frame-number 0"
gdb:
2014-03-06 Yao Qi <yao@codesourcery.com>
PR breakpoints/16508
* tracepoint.c (check_trace_running): New function.
(trace_find_command): Move code to check_trace_running and
call check_trace_running.
(trace_find_pc_command): Likewise.
(trace_find_tracepoint_command): Likewise.
(trace_find_line_command): Likewise.
(trace_find_range_command): Likewise.
* tracepoint.h (check_trace_running): Likewise.
* mi/mi-main.c (mi_cmd_trace_find): Call check_trace_running.
gdb/testsuite:
2014-03-06 Yao Qi <yao@codesourcery.com>
* gdb.trace/pr16508.exp: New file.
This patch is to change the default implementation of to_traceframe_info
from 'return NULL' to tcomplain, which is intended. If new target
supports tracepoint, this method should be implemented, otherwise,
an error is thrown.
gdb:
2014-03-06 Yao Qi <yao@codesourcery.com>
* target.h (struct target_ops) <to_traceframe_info>: Use
TARGET_DEFAULT_NORETURN (tcomplain ()).
* target-delegates.c: Regenerated.
In non-stop mode, or rather, breakpoints always-inserted mode, the
code cache can easily end up with stale breakpoint instructions:
All it takes is filling a cache line when breakpoints already exist in
that memory region, and then delete the breakpoint.
Vis. (from the new test):
(gdb) set breakpoint always-inserted on
(gdb) b 23
Breakpoint 2 at 0x400540: file ../../../src/gdb/testsuite/gdb.base/breakpoint-shadow.c, line 23.
(gdb) b 24
Breakpoint 3 at 0x400547: file ../../../src/gdb/testsuite/gdb.base/breakpoint-shadow.c, line 24.
disass main
Dump of assembler code for function main:
0x000000000040053c <+0>: push %rbp
0x000000000040053d <+1>: mov %rsp,%rbp
=> 0x0000000000400540 <+4>: movl $0x1,-0x4(%rbp)
0x0000000000400547 <+11>: movl $0x2,-0x4(%rbp)
0x000000000040054e <+18>: mov $0x0,%eax
0x0000000000400553 <+23>: pop %rbp
0x0000000000400554 <+24>: retq
End of assembler dump.
So far so good. Now flush the code cache:
(gdb) set code-cache off
(gdb) set code-cache on
Requesting a disassembly works as expected, breakpoint shadowing is
applied:
(gdb) disass main
Dump of assembler code for function main:
0x000000000040053c <+0>: push %rbp
0x000000000040053d <+1>: mov %rsp,%rbp
=> 0x0000000000400540 <+4>: movl $0x1,-0x4(%rbp)
0x0000000000400547 <+11>: movl $0x2,-0x4(%rbp)
0x000000000040054e <+18>: mov $0x0,%eax
0x0000000000400553 <+23>: pop %rbp
0x0000000000400554 <+24>: retq
End of assembler dump.
However, now delete the breakpoints:
(gdb) delete
Delete all breakpoints? (y or n) y
And disassembly shows the old breakpoint instructions:
(gdb) disass main
Dump of assembler code for function main:
0x000000000040053c <+0>: push %rbp
0x000000000040053d <+1>: mov %rsp,%rbp
=> 0x0000000000400540 <+4>: int3
0x0000000000400541 <+5>: rex.RB cld
0x0000000000400543 <+7>: add %eax,(%rax)
0x0000000000400545 <+9>: add %al,(%rax)
0x0000000000400547 <+11>: int3
0x0000000000400548 <+12>: rex.RB cld
0x000000000040054a <+14>: add (%rax),%al
0x000000000040054c <+16>: add %al,(%rax)
0x000000000040054e <+18>: mov $0x0,%eax
0x0000000000400553 <+23>: pop %rbp
0x0000000000400554 <+24>: retq
End of assembler dump.
Those breakpoint instructions are no longer installed in target memory
they're stale in the code cache. Easily confirmed by just disabling
the code cache:
(gdb) set code-cache off
(gdb) disass main
Dump of assembler code for function main:
0x000000000040053c <+0>: push %rbp
0x000000000040053d <+1>: mov %rsp,%rbp
=> 0x0000000000400540 <+4>: movl $0x1,-0x4(%rbp)
0x0000000000400547 <+11>: movl $0x2,-0x4(%rbp)
0x000000000040054e <+18>: mov $0x0,%eax
0x0000000000400553 <+23>: pop %rbp
0x0000000000400554 <+24>: retq
End of assembler dump.
I stumbled upon this when writing a patch to infrun.c, that made
handle_inferior_event & co fill in the cache before breakpoints were
removed from the target. Recall that wait_for_inferior flushes the
dcache for every event. So in that case, always-inserted mode was not
necessary to trigger this. It's just a convenient way to expose the
issue.
The dcache works at the raw memory level. We need to update it
whenever memory is written, no matter what kind of target memory
object was originally passed down by the caller. The issue is that
the dcache update code isn't reached when a caller explicitly writes
raw memory. Breakpoint insertion/removal is one such case --
mem-break.c uses target_write_read_memory/target_write_raw_memory.
The fix is to move the dcache update code from memory_xfer_partial_1
to raw_memory_xfer_partial so that it's always reachable.
When we do that, we can actually simplify a series of things.
memory_xfer_partial_1 no longer needs to handle writes for any kind of
memory object, and therefore dcache_xfer_memory no longer needs to
handle writes either. So the latter (dcache_xfer_memory) and its
callees can be simplified to only care about reads. While we're
touching dcache_xfer_memory's prototype, might as well rename it to
reflect that fact that it only handles reads, and make it follow the
new target_xfer_status/xfered_len style. This made me notice that
dcache_xfer_memory loses the real error status if a memory read fails:
we could have failed to read due to TARGET_XFER_E_UNAVAILABLE, for
instance, but we always return TARGET_XFER_E_IO, hence the FIXME note.
I felt that fixing that fell out of the scope of this patch.
Currently dcache_xfer_memory handles the case of a write failing. The
whole cache line is invalidated when that happens. However,
dcache_update, the sole mechanism for handling writes that will remain
after the patch, does not presently handle that scenario. That's a
bug. The patch makes it handle that, by passing down the
target_xfer_status status from the caller, so that it can better
decide what to do itself. While I was changing the function's
prototype, I constified the myaddr parameter, getting rid of the need
for the cast as seen in its existing caller.
Tested on x86_64 Fedora 17, native and gdbserver.
gdb/
2014-03-05 Pedro Alves <palves@redhat.com>
PR gdb/16575
* dcache.c (dcache_poke_byte): Constify ptr parameter. Return
void. Update comment.
(dcache_xfer_memory): Delete.
(dcache_read_memory_partial): New, based on the read bits of
dcache_xfer_memory.
(dcache_update): Add status parameter. Use ULONGEST for len, and
adjust. Discard cache lines if the reason for the update was
error.
* dcache.h (dcache_xfer_memory): Delete declaration.
(dcache_read_memory_partial): New declaration.
(dcache_update): Update prototype.
* target.c (raw_memory_xfer_partial): Update the dcache here.
(memory_xfer_partial_1): Don't handle dcache writes here.
gdb/testsuite/
2014-03-05 Pedro Alves <palves@redhat.com>
PR gdb/16575
* gdb.base/breakpoint-shadow.exp (compare_disassembly): New
procedure.
(top level): Adjust to use it. Add tests that exercise breakpoint
interaction with the code-cache.
This adds support for "func@localentry", an expression that returns the
ELFv2 local entry point address of function "func". I've excluded
dynamic relocation support because that obviously would require glibc
changes.
include/elf/
* ppc64.h (R_PPC64_REL24_NOTOC, R_PPC64_ADDR64_LOCAL): Define.
bfd/
* elf64-ppc.c (ppc64_elf_howto_raw): Add R_PPC64_ADDR64_LOCAL entry.
(ppc64_elf_reloc_type_lookup): Support R_PPC64_ADDR64_LOCAL.
(ppc64_elf_check_relocs): Likewise.
(ppc64_elf_relocate_section): Likewise.
* Add BFD_RELOC_PPC64_ADDR64_LOCAL.
* bfd-in2.h: Regenerate.
* libbfd.h: Regenerate.
gas/
* config/tc-ppc.c (ppc_elf_suffix): Support @localentry.
(md_apply_fix): Support R_PPC64_ADDR64_LOCAL.
ld/testsuite/
* ld-powerpc/elfv2-2a.s, ld-powerpc/elfv2-2b.s: New files.
* ld-powerpc/elfv2-2exe.d, ld-powerpc/elfv2-2so.d: New files.
* ld-powerpc/powerpc.exp: Run new test.
elfcpp/
* powerpc.h (R_PPC64_REL24_NOTOC, R_PPC64_ADDR64_LOCAL): Define.
gold/
* powerpc.cc (Target_powerpc::Scan::local, global): Support
R_PPC64_ADDR64_LOCAL.
(Target_powerpc::Relocate::relocate): Likewise.
This patch allows gas to assemble a testcase like
li 3,ext_sym
which oddly was not accepted while the following is OK:
li 3,ext_sym@l
* config/tc-ppc.c (md_assemble): Move code adjusting reloc types
later. Merge absolute and relative branch reloc selection.
Generate 16-bit relocs for most 16-bit insn fields given a
non-constant expression.
The XCOFF assembler does some wierd things with instructions like
`lwz 9,sym(30'. See the comment in md_apply_fix. From an ELF
perspective, it's weird even to magically select a TOC16 reloc
when a symbol is in the TOC/GOT. ELF assemblers generally use
modifiers like @toc to select relocs, so remove this "feature"
for ELF. I believe this was to support gcc -m32 -mcall-aixdesc
but that combination of gcc options has been broken for a long
time.
* config/tc-ppc.c (ppc_is_toc_sym): Remove OBJ_ELF support.
(md_assemble): Don't call ppc_is_toc_sym for ELF.
2014-02-04 Heiher <r@hev.cc>
* elfxx-mips.c (mips_set_isa_flags): Use E_MIPS_ARCH_64R2 for
Loongson-3A.
(mips_mach_extensions): Make bfd_mach_mips_loongson_3a an
extension of bfd_mach_mipsisa64r2.
opcodes/
2014-02-04 Heiher <r@hev.cc>
* mips-dis.c (mips_arch_choices): Usee ISA_MIPS64R2 for Loongson-3A.
gas/
2014-02-04 Heiher <r@hev.cc>
* config/tc-mips.c (mips_cpu_info_table): Use ISA_MIPS64R2 for
Loongson-3A.
built when constructing a toolchain configued from all targets.
* Makefile.am (ALL_EMUL_EXTRA_BINARIES): Remove default-manifest.
* Makefile.in: Regenerate.
using Thumb2 instructions for those cores which do not support the ARM ISA.
* elf32-arm.c (elf32_thumb2_plt0_entry): New array.
(elf32_thumb2_plt_entry): New array.
(elf32_arm_create_dynamic_sections): Set PLT entry sizes when
using thumb2 based PLT.
(elf32_arm_populate_plt_entry): Handle generating Thumb2 based PLT
entries.
(elf32_arm_final_link_relocate): Do not bias jumps to Thumb based
PLT entries.
(elf32_arm_finish_dynamic_sections): Handle creation of Thumb2
based PLT 0-entry.
(elf32_arm_output_plt_map_1): Handle creation of local symbols for
Thumb2 based PLT 0-entry.
(elf32_arm_output_arch_local_syms): Handle creation of local
symbols for Thumb2 based PLT entries.
This patch moves the probe data from the objfile to the per-BFD
object. This lets the probes be shared between different inferiors
(and different objfiles when dlmopen is in use, should gdb ever handle
that).
2014-03-03 Tom Tromey <tromey@redhat.com>
* elfread.c (probe_key): Change to bfd_data.
(elf_get_probes, probe_key_free, _initialize_elfread): Probes are
now per-BFD, not per-objfile.
* stap-probe.c (stap_probe_destroy): Update comment.
(handle_stap_probe): Allocate on the per-BFD obstack.
This changes the probes to be independent of the program space.
After this, when a probe's address is needed, it is determined by
applying offsets at the point of use.
This introduces a bound_probe object, similar to bound minimal
symbols. Objects of this type are used when it's necessary to pass a
probe and its corresponding objfile.
This removes the backlink from probe to objfile, which was primarily
used to fetch the architecture to use.
This adds a get_probe_address function which calls a probe method to
compute the probe's relocated address. Similarly, it adds an objfile
parameter to the semaphore methods so they can do the relocation
properly as well.
2014-03-03 Tom Tromey <tromey@redhat.com>
* break-catch-throw.c (fetch_probe_arguments): Use bound probes.
* breakpoint.c (create_longjmp_master_breakpoint): Use
get_probe_address.
(add_location_to_breakpoint, bkpt_probe_insert_location)
(bkpt_probe_remove_location): Update.
* breakpoint.h (struct bp_location) <probe>: Now a bound_probe.
* elfread.c (elf_symfile_relocate_probe): Remove.
(elf_probe_fns): Update.
(insert_exception_resume_breakpoint): Change type of "probe"
parameter to bound_probe.
(check_exception_resume): Update.
* objfiles.c (objfile_relocate1): Don't relocate probes.
* probe.c (bound_probe_s): New typedef.
(parse_probes): Use get_probe_address. Set sal's objfile.
(find_probe_by_pc): Return a bound_probe.
(collect_probes): Return a VEC(bound_probe_s).
(compare_probes): Update.
(gen_ui_out_table_header_info): Change type of "probes"
parameter. Update.
(info_probes_for_ops): Update.
(get_probe_address): New function.
(probe_safe_evaluate_at_pc): Update.
* probe.h (struct probe_ops) <get_probe_address>: New field.
<set_semaphore, clear_semaphore>: Add objfile parameter.
(struct probe) <objfile>: Remove field.
<arch>: New field.
<address>: Update comment.
(struct bound_probe): New.
(find_probe_by_pc): Return a bound_probe.
(get_probe_address): Declare.
* solib-svr4.c (struct probe_and_action) <address>: New field.
(hash_probe_and_action, equal_probe_and_action): Update.
(register_solib_event_probe): Add address parameter.
(solib_event_probe_at): Update.
(svr4_create_probe_breakpoints): Add objfile parameter. Use
get_probe_address.
* stap-probe.c (struct stap_probe) <sem_addr>: Update comment.
(stap_get_probe_address): New function.
(stap_can_evaluate_probe_arguments, compute_probe_arg)
(compile_probe_arg): Update.
(stap_set_semaphore, stap_clear_semaphore): Compute semaphore's
address.
(handle_stap_probe): Don't relocate the probe.
(stap_relocate): Remove.
(stap_gen_info_probes_table_values): Update.
(stap_probe_ops): Remove stap_relocate.
* symfile-debug.c (debug_sym_relocate_probe): Remove.
(debug_sym_probe_fns): Update.
* symfile.h (struct sym_probe_fns) <sym_relocate_probe>: Remove.
* symtab.c (init_sal): Use memset.
* symtab.h (struct symtab_and_line) <objfile>: New field.
* tracepoint.c (start_tracing, stop_tracing): Update.
This fixes up a few mildly erroneous comments in probe.h.
2014-03-03 Tom Tromey <tromey@redhat.com>
* probe.h (parse_probes, find_probe_by_pc)
(find_probes_in_objfile): Fix comments.
generate warning messages about an instruction that changes the interrupt
state not being followed by a NOP instruction.
* config/msp430/msp430.c: Replace known mcu array with known
msp430 ISA mcu name array.
Accept any name for -mmcu option.
Add -mz option to warn about missing NOP following an interrupt
status change.
(check_for_nop): New.
(msp430_operands): Emit a warning, if requested, when an interrupt
changing instruction is not followed by a NOP.
* doc/c-msp430.c: Document -mz option.
* gas/msp430/bad.d: Add -mz option.
* gas/msp430/bad.s: Add more cases where warnings should be
generated.
* gas/msp430/bad.l: Add expected warning messages.
