for loading addresses using CALL relocations.
Don't emit CALL relocations when a base register is used.
* gas/mips/lca-svr4pic.d: New test for the "lca" macro.
* gas/mips/lca-xgot.d: Likewise.
* gas/mips/lca.s: Source for the new tests.
* gas/mips/mips.exp: Run the new tests.
* opcode/mips.h: Define new enum members, M_LCA_AB and M_DLCA_AB.
* mips-opc.c (mips_builtin_opcodes): Handle new macros: "lca" and
"dlca".
2003-09-30 Chris Demetriou <cgd@broadcom.com>
* config/tc-mips.c (mips_ip): Capitalize first word of
existing condition code warning, and add condition code
warnings for .ps instructions, and for bc1any[24][tf].
[ gas/testsuite/ChangeLog ]
2003-09-30 Chris Demetriou <cgd@broadcom.com>
* lib/gas-defs.exp (run_dump_test): If stderr file is specified
and there was no stderr output, compare anyway (i.e., cause a
test failure).
* gas/mips/mips64-mips3d.s: Add some new instructions to test warnings.
* gas/mips/mips64-mips3d.l: New file.
* gas/mips/mips64-mips3d.d: Use mips64-mips3d.l, and update for
changes to mips64-mips3d.s.
* gas/mips/mips64-mips3d-incl.d: Likewise.
* gas/mips/set-arch.l: New file.
* gas/mips/set-arch.d: Specify set-arch.l as stderr output to check.
* gas/mips/mips5.l: Make error messages match source.
* mips.h (CPU_RM7000): New macro.
(OPCODE_IS_MEMBER): Match CPU_RM7000 against 4650 insns.
bfd/
* archures.c (bfd_mach_mips7000): New.
* bfd-in2.h: Regenerated.
* cpu-mips.c (arch_info_struct): Add an entry for mips:7000.
* elfxx-mips.c (mips_set_isa_flags): Handle bfd_mach_mips7000.
(mips_mach_extensions): Add an entry for it.
opcodes/
* mips-dis.c (mips_arch_choices): Add rm7000 and rm9000 entries.
gas/
* config/tc-mips.c (hilo_interlocks): True for CPU_RM7000.
(mips_cpu_info_table): Add rm7000 and rm9000 entries.
gas/testsuite/
* gas/mips/rm7000.[sd]: New test.
* gas/mips/mips.exp: Run it.
2003-07-08 Chris Demetriou <cgd@broadcom.com>
* config/tc-mips.c (mips_validate_fix): Do not warn about branch
target being a global symbol if not compiling SVR4 PIC code.
[ gas/testsuite/ChangeLog ]
2003-07-08 Chris Demetriou <cgd@broadcom.com>
* gas/testsuite/gas/mips/mips.exp: Make sure that branch-misc-2 is
run to compile non-PIC code, and add branch-misc-2pic.
* gas/mips/branch-misc-2.l: Adjust for change in non-PIC warnings.
* gas/mips/branch-misc-2pic.l: New file.
* gas/mips/branch-misc-2pic.s: New file.
special handling for n32 ABI.
(macro): Likewise.
* gas/mips/elf-rel-got-n32.d: Remove special handling for n32 ABI.
* gas/mips/elf-rel-xgot-n32.d: Likewise.
* gas/mips/jal-newabi.d: Likewise.
* ld-mips-elf/elf-rel-got-n32.d: Remove special handling for n32 ABI.
* ld-mips-elf/elf-rel-xgot-n32.d: Likewise.
(elf_mips_howto_table_rel): Use it.
(gprel32_with_gp): Move prototype.
(mips_elf_hi16_reloc): Check for ! BSF_LOCAL instead of zero addend.
Use mips_elf_generic_reloc.
(mips_elf_got16_reloc): Check for ! BSF_LOCAL instead of zero addend.
Code cleanup.
(_bfd_mips_elf32_gprel16_reloc): Check for ! BSF_LOCAL instead of
zero addend.
(mips_elf_gprel32_reloc): Likewise. Use the same GP assignment logic
as in the other *_gprel*_reloc functions.
(gprel32_with_gp): Handle partial_inplace properly.
(mips32_64bit_reloc): Use mips_elf_generic_reloc.
(mips16_gprel_reloc): Check for ! BSF_LOCAL instead of zero addend.
Do addend handling directly instead of calling
_bfd_mips_elf_gprel16_with_gp. Handle partial_inplace properly.
* elf64-mips.c (mips_elf64_hi16_reloc): Check for ! BSF_LOCAL instead
of zero addend. Handle partial_inplace properly.
(mips_elf64_got16_reloc): Check for ! BSF_LOCAL instead of zero
addend.
(mips_elf64_gprel16_reloc): Likewise.
(mips_elf64_literal_reloc): Likewise.
(mips_elf64_gprel32_reloc): Likewise. Use the same GP assignment
logic as in the other *_gprel*_reloc functions. Handle
partial_inplace properly.
(mips_elf64_shift6_reloc): Check for ! BSF_LOCAL instead of zero
addend. Handle partial_inplace properly.
(mips16_gprel_reloc): Likewise. Do addend handling directly instead
of calling _bfd_mips_elf_gprel16_with_gp.
* elfn32-mips.c (mips_elf_got16_reloc): Check for BSF_LOCAL.
(mips_elf_gprel32_reloc): Check for ! BSF_LOCAL instead
of zero addend.
(mips_elf_shift6_reloc): Handle partial_inplace properly.
(mips16_gprel_reloc): Likewise. Do addend handling directly instead
of calling _bfd_mips_elf_gprel16_with_gp.
* elfxx-mips.c (_bfd_mips_elf_gprel16_with_gp): Handle
partial_inplace properly. Fix wrong addend handling. Fix overflow
check.
(_bfd_mips_elf_sign_extend): Renamed from mips_elf_sign_extend and
exported.
(mips_elf_calculate_relocation): Use _bfd_mips_elf_sign_extend.
(_bfd_mips_elf_relocate_section): Likewise.
(mips_elf_create_dynamic_relocation): Update sec_info_type access.
* elfxx-mips.h (_bfd_mips_relax_section): Fix prototype declaration.
(_bfd_mips_elf_sign_extend): New prototype.
* config/tc-mips.c (md_pcrel_from): Return actual pcrel address.
(md_apply_fix3): Ignore non-special relocations. Remove superfluous
exceptions from size assert. Remove most of the addend fixup
specialcasing. Remove value, use valP directly. simplify fx_addnumber
handling. Remove zero addend specialcases.
(tc_gen_reloc): Use appropriate value for reloc2 addend. Remove
the addend fixup specialcase.
* config/tc-mips.h (MD_APPLY_SYM_VALUE): Define as 0.
fixp's. Don't relax overflow checking for partial_inplace relocations.
Use the actual relocation type in combined relocs, not just the type
of the first one.
(macro_build_jalr): Use actual relocation size for new fix.
(s_cpsetup, s_gpdword): Likewise.
Alexandre Oliva <aoliva@redhat.com>
* elfxx-mips.c (_bfd_mips_elf_merge_private_bfd_data): Adjust
pic tests, change to warning.
(_bfd_mips_elf_final_link): Remove EF_MIPS_CPIC flag setting.
2003-05-07 Eric Christopher <echristo@redhat.com>
* config/tc-mips.c (mips_abicalls): New variable.
(md_parse_option): Use.
(s_option): Ditto.
(s_abicalls): Ditto.
(mips_elf_final_processing): Set EF_MIPS_PIC and
EF_MIPS_CPIC dependent on above.
* config/tc-mips.c: Use signed add for n32 address arithmetic.
(append_insn): When filling delay slots with instructions
that have fixups that tc_gen_reloc might consider modifyable
in variant frags, start a new frag.
(load_address): Generate GOT_DISP with of without offset
depending on whether symbol is local. For -xgot, use
GOT_PAGE/GOT_OFST or GOT_HI16/GOT_LO16.
(macro) <M_DLA_AB, M_LA_AB>: Likewise.
<M_JAL_A>: In NewABI, use CALL16 or GOT_DISP for small got,
CALL_HI16/CALL_LO16 or GOT_PAGE/GOT_OFST for big got.
<ld_st>: In NewABI with small got, always use
GOT_PAGE/GOT_OFST, with the latter in the load/store
instruction. With big got, use GOT_HI16/GOT_LO16 or
GOT_PAGE/GOT_OFST.
(tc_gen_reloc): Adjust variant frags with GOT_DISP in NewABI.
Add tc_frag_data.tc_fr_offset to addends. Decay CALL16,
GOT_OFST and GOT_DISP to GOT_DISP in NewABI.
(md_convert_frag): Use memmove for safe copying of overlapping
regions.
constant address that Alexandre took out by accident. Reject
64-bit addresses that are not sign extensions of 32 bits only if
we don't support 64-bit address constants.
2003-04-02 Chris Demetriou <cgd@broadcom.com>
* config/tc-mips.c (macro2): Adjust implementation of
M_ULH, M_ULHU, M_ULW, and M_ULD so that they work properly
in the case where the source and destination registers
are the same.
[ gas/testsuite/ChangeLog ]
2003-04-02 Chris Demetriou <cgd@broadcom.com>
* gas/mips/ulh.d: Adjust for ulh and ulhu macro assembly changes.
* gas/mips/mips.exp: Define new "gpr_ilocks" architecture
property, and add it to mips2 (and later) chips and r3900.
* gas/mips/uld2.s: New test source file.
* gas/mips/ulh2.s: Likewise.
* gas/mips/ulw2.s: Likewise.
* gas/mips/uld2.l: New test stderr listing.
* gas/mips/ulh2.l: Likewise.
* gas/mips/ulw2.l: Likewise.
* gas/mips/uld2-eb.d: New test.
* gas/mips/uld2-el.d: Likewise.
* gas/mips/ulh2-eb.d: Likewise.
* gas/mips/ulh2-el.d: Likewise.
* gas/mips/ulw2-eb-ilocks.d: Likewise.
* gas/mips/ulw2-eb.d: Likewise.
* gas/mips/ulw2-el-ilocks.d: Likewise.
* gas/mips/ulw2-el.d: Likewise.
* gas/mips/mips.exp: Run new tests for appropriate architectures.
* config/tc-mips.c (reloc_needs_lo_p): New function.
(fixup_has_matching_lo_p): New function.
(append_insn): Use reloc_needs_lo_p to check whether a relocation
might need a matching %lo(). Reuse the head of mips_hi_fixup_list
if that fixup already has a matching %lo(). Don't call frag_wane here.
(macro): Call frag_wane here if the last unmatched hi was in the
current frag.
(pic_need_relax): New function, split out from...
(md_estimate_size_before_relax): ...here.
(mips_frob_file): Use reloc_needs_lo_p. Use pic_need_relax to test
whether BFD_RELOC_MIPS_GOT16 fixups refer to global symbols.
gas/testsuite/
* gas/mips/rel12.[sd], gas/mips/rel13.[sd]: New tests.
* gas/mips/mips.exp: Run them.
* config/tc-mips.c (enum small_ex_type): Remove.
(imm_unmatched_hi): Remove.
(md_assemble): Remove use of imm_unmatched_hi. Remove the last
argument from calls to append_insn.
(append_insn): Remove unmatched_hi parameter; check reloc_type[0]
instead.
(macro_build): Update append_insn calls.
(mips16_macro_build, macro_build_lui): Likewise.
(mips_ip): Rework handling of small expressions. Move explicit
relocation handling into my_getSmallExpression. Assume that the
value of 'o' operands is zero if there is only one bracketed
expression left.
(percent_op): Make constant. Record the BFD relocation code
associated with each operator.
(my_getSmallParser, my_getPercentOp): Remove.
(parse_relocation): New function.
(my_getSamllExpression): Rework. Fill in relocations here
rather than in mips_ip.
gas/testsuite
* gas/mips/elf-rel8.[sd], gas/mips/elf-rel9.[sd],
gas/mips/elf-rel10.[sd], gas/mips/elf-rel11.[sd]: New tests.
* gas/mips/mips.exp: Run elf-rel8 and elf-rel9 for all elf
targets. Run elf-rel10 and elf-rel11 for NewABI targets.
