New statics.
(OPTION_ELF_BASE): Make room for new option macros.
(OPTION_SOFT_FLOAT, OPTION_HARD_FLOAT, OPTION_SINGLE_FLOAT,
OPTION_DOUBLE_FLOAT): New option macros.
(md_longopts): Add msoft-float, mhard-float, msingle-float and
mdouble-float.
(md_parse_option): Handle OPTION_SINGLE_FLOAT,
OPTION_DOUBLE_FLOAT, OPTION_SOFT_FLOAT and OPTION_HARD_FLOAT.
(md_show_usage): Add -msoft-float, -mhard-float, -msingle-float
and -mdouble-float.
(struct mips_set_options): New fields soft_float and single_float.
(mips_opts): Initialized them. Add comment for each field
initializer.
(mips_after_parse_args): Set them based on file_mips_soft_float
and file_mips_single_float.
(s_mipsset): Add support for `.set softfloat', `.set hardfloat',
`.set singlefloat' and `.set doublefloat'.
(is_opcode_valid): New function to invoke OPCODE_IS_MEMBER.
Handle single-float and soft-float instructions here.
(macro_build, mips_ip): Use it instead of OPCODE_IS_MEMBER.
(is_opcode_valid_16): New function.
(mips16_ip): Use it instead of OPCODE_IS_MEMBER.
(macro) <M_LDC1_AB, M_SDC1_AB, M_L_DOB, M_L_DAB, M_S_DAB,
M_S_DOB>: Remove special-casing of r4650.
* doc/c-mips.texi (-march=): Add Octeon.
(MIPS Opts): Document -msoft-float and -mhard-float. Document
-msingle-float and -mdouble-float.
(MIPS floating-point): New section. Document `.set softfloat' and
`.set hardfloat'. Document `.set singlefloat' and `.set
doublefloat'.
* config/tc-mips.h (mips_nop_opcode): Declare.
(NOP_OPCODE): Define.
(mips_segment_info): New structure.
(TC_SEGMENT_INFO_TYPE): Use it instead of insn_label_list.
* config/tc-mips.c (label_list): Adjust for new TC_SEGMENT_INFO_TYPE.
(mips_record_mips16_mode): New function.
(install_insn): Call it.
(mips_align): Likewise. Turn the fill argument into an "int *".
Use frag_align_code for code segments if no fill data is given.
(s_align): Adjust call accordingly.
(mips_nop_opcode): New function.
(mips_handle_align): Use the first variable byte to decide which
nop sequence is needed. Use md_number_to_chars and mips16_nop_insn.
gas/testsuite/
* gas/mips/align2.s, gas/mips/align2.d, gas/mips/align2-el.d: New
tests.
* gas/mips/mips.exp: Run them.
* config/tc-mips.c (AT): Rename to...
(ATREG): ... this.
(AT): New definition.
(mips_set_options): Rename "noat" to "at"; change the type.
(mips_opts): Update accordingly.
(append_insn): Likewise.
(macro_build_ldst_constoffset): Likewise.
(load_address): Likewise.
(macro, macro2): Likewise.
(s_mipsset): Handle ".set at=REG". Update handling of ".set at"
and ".set noat".
gas/testsuite/:
* gas/mips/at-1.d, gas/mips/at-2.l: New tests to check the ".set
at=REG" directive.
* gas/mips/at-1.s, gas/mips/at-2.s: Sources for the new tests.
* gas/mips/mips.exp: Run the new tests.
2007-09-24 Carlos O'Donell <carlos@codesourcery.com>
* config/tc-mips.c (s_align): Set max_alignment to 28.
gas/testsuite/
2007-09-24 Carlos O'Donell <carlos@codesourcery.com>
* gas/mips/align.s, gas/mips/align.d: New test.
* gas/mips/mips.exp: Run it.
* config/tc-mips.c (mips_cpu_info_table): Add new entries for
{24k,24ke,34k,74k}f{2_1,1_1,x}. Also add an entry for 74kf3_2.
Deprecate *x and *fx.
* doc/c-mips.texi: Document the new CPU arguments. Deprecate
*x and *fx.
* elfxx-mips.c (mips_elf_calculate_relocation): Allow local stubs
to be used for calls from MIPS16 code.
gas/
* config/tc-mips.h (TC_SYMFIELD_TYPE): New.
* config/tc-mips.c (append_insn): Record which symbols have
R_MIPS16_26 relocations against them.
(mips_fix_adjustable): Don't reduce relocations against such symbols.
ld/testsuite/
* ld-mips-elf/mips16-local-stubs-1.s,
* ld-mips-elf/mips16-local-stubs-1.d: New tests.
* ld-mips-elf/mips-elf.exp: Run them.
* doc/as.texinfo: Add -mvxworks-pic to the list of MIPS options.
* doc/c-mips.texi (-KPIC, -mvxworks-pic): Document.
* config/tc-mips.c (md_show_usage): Mention -mvxworks-pic.
* config/tc-mips.c (mips_set_options, mips_opts, file_ase_dspr2,
ISA_SUPPORTS_DSPR2_ASE, MIPS_CPU_ASE_DSPR2): Add DSP R2 ASE support.
(macro_build): Add case '2'.
(macro): Expand M_BALIGN to nop, packrl.ph or balign.
(validate_mips_insn): Add support for balign instruction.
(mips_ip): Handle DSP R2 instructions. Support balign instruction.
(OPTION_DSPR2, OPTION_NO_DSPR2, OPTION_COMPAT_ARCH_BASE,
md_parse_option, mips_after_parse_args): Add -mdspr2 and -mno-dspr2
command line options.
(s_mipsset): Add support for .set dspr2 and .set nodspr2 directives.
(md_show_usage): Add -mdspr2 and -mno-dspr2 help output.
* doc/c-mips.texi, doc/as.texinfo: Document -mdspr2, -mno-dspr2,
.set dspr2, .set nodspr2.
[ gas/testsuite/ChangeLog ]
* gas/mips/mips32-dspr2.s, gas/mips/mips32-dspr2.d: New test for
DSP R2.
* gas/mips/mips.exp: Run new test.
[ include/opcode/Changelog ]
* mips.h (OP_SH_BP, OP_MASK_BP): Add support for balign instruction.
(INSN_DSPR2): Add flag for DSP R2 instructions.
(M_BALIGN): New macro.
[ opcodes/ChangeLog ]
* mips-dis.c (mips_arch_choices): Add DSP R2 support.
(print_insn_args): Add support for balign instruction.
* mips-opc.c (D33): New shortcut for DSP R2 instructions.
(mips_builtin_opcodes): Add DSP R2 instructions.
[ sim/mips/ChangeLog ]
* Makefile.in (IGEN_INCLUDE): Add dsp2.igen.
* configure.ac (mips*-sde-elf*, mipsisa32r2*-*-*, mipsisa64r2*-*-*):
Add dsp2 to sim_igen_machine.
* configure: Regenerate.
* dsp.igen (do_ph_op): Add MUL support when op = 2.
(do_ph_mulq): New function to support mulq_rs.ph and mulq_s.ph.
(mulq_rs.ph): Use do_ph_mulq.
(MFHI, MFLO, MTHI, MTLO): Move these instructions to mips.igen.
* mips.igen: Add dsp2 model and include dsp2.igen.
(MFHI, MFLO, MTHI, MTLO): Extend these instructions for
for *mips32r2, *mips64r2, *dsp.
(MADD, MADDU, MSUB, MSUBU, MULT, MULTU): Extend these instructions
for *mips32r2, *mips64r2, *dsp2.
* dsp2.igen: New file for MIPS DSP REV 2 ASE.
[ sim/testsuite/sim/mips/ChangeLog ]
* basic.exp: Run the dsp2 test.
* utils-dsp.inc (dspckacc_astio, dspck_tsimm): New macro.
* mips32-dsp2.s: New test.
* config/tc-mips.c (pic_need_relax): Return true for section symbols.
gas/testsuite:
* gas/mips/elf-rel26.s: New test.
* gas/mips/elf-rel26.d: Ditto.
* gas/mips/mips.exp: Run it.
* config/tc-mips.c (macro_build): Use INSERT_OPERAND wherew
appropriate.
(mips16_macro_build): Use MIPS16_INSERT_OPERAND where appropriate.
(mips_ip): Make overflowed/underflowed constant arguments in DSP
and MT instructions a fatal error. Use INSERT_OPERAND where
appropriate. Improve warnings for break and wait code overflows.
Use symbolic constant of OP_MASK_COPZ.
(mips16_ip): Use MIPS16_INSERT_OPERAND where appropriate.
[ gas/testsuite/ChangeLog ]
* gas/mips/mips32-dsp.d, gas/mips/mips32-dsp.s, gas/mips/mips32-mt.d,
gas/mips/mips32-mt.s: Remove instructions with invalid arguments.
* gas/mips/mips32-dsp.l, gas/mips/mips32-mt.l: Delete file.
[ include/opcode/ChangeLog ]
* mips.h: Improve description of MT flags.
* config/tc-mips.c (ISA_SUPPORTS_SMARTMIPS): Rename.
(ISA_SUPPORTS_DSP_ASE, ISA_SUPPORTS_MT_ASE, ISA_HAS_64BIT_FPRS,
ISA_HAS_MXHC1): New macros.
(HAVE_32BIT_FPRS): Use ISA_HAS_64BIT_FPRS instead of
ISA_HAS_64BIT_REGS. Formatting fixes. Improved comments.
(mips_cpu_info): Change to use combined ASE/IS_ISA flag.
(MIPS_CPU_IS_ISA, MIPS_CPU_ASE_SMARTMIPS, MIPS_CPU_ASE_DSP,
MIPS_CPU_ASE_MT, MIPS_CPU_ASE_MIPS3D, MIPS_CPU_ASE_MDMX): New defines.
(mips_after_parse_args): Change default handling of float register
size to account for 32bit code with 64bit FP. Better sanity checking
of ISA/ASE/ABI option combinations.
(s_mipsset): Support switching of GPR and FPR sizes via
.set {g,f}p={32,64,default}. Better sanity checking for .set ASE
options.
(mips_elf_final_processing): We should record the use of 64bit FP
registers in 32bit code but we don't, because ELF header flags are
a scarce ressource.
(mips_cpu_info_table): Add ASE flags for CPUs with mandatory ASE
extensions. Add 4ksc, 4kec, 4kem, 4kep, 4ksd, m4kp, 24kec, 24kef,
24kex, 34kc, 34kf, 34kx, 25kf CPU definitions.
(mips_cpu_info_from_isa): Use MIPS_CPU_IS_ISA.
* doc/c-mips.texi: Document .set {g,f}p={32,64,default}. Document
missing -march options. Document .set arch=CPU. Move .set smartmips
to ASE page. Use @code for .set FOO examples.
[ gas/testsuite/Changelog ]
* gas/mips/mips-gp32-fp64-pic.d, mips/mips-gp32-fp64.d,
gas/mips/mips-gp64-fp32-pic.d, gas/mips/mips-gp64-fp32.l,
gas/mips/mips-gp64-fp64.d: Adjust test cases to the changes assembler
output.
* gas/mips/mips-gp32-fp64.l, gas/mips/mips-gp64-fp32-pic.l: New files,
catch assembler warnings.
* config/tc-mips.c (macro_build): Test for currently active
mips16 option.
(mips16_ip): Reject invalid opcodes.
[ opcodes/ChangeLog ]
* mips16-opc.c (I1, I32, I64): New shortcut defines.
(mips16_opcodes): Change membership of instructions to their
lowest baseline ISA.
[ gas/testsuite/ChangeLog ]
* gas/mips/mips.exp: Run new tests.
* gas/mips/mips16e.s, gas/mips/mips16e.d, gas/mips/mips16e-64.s,
gas/mips/mips16e-64.d, gas/mips/mips16e-64.l: New tests.
* config/tc-mips.c (append_insn): Don't check the range of j or
jal addresses.
[ gas/testsuite/ChangeLog ]
* gas/mips/jal-range.l: Don't check the range of j or jal
addresses.
