gdb/ChangeLog:
* gnu-v3-abi.c (gnuv3_pass_by_reference): Call TYPE_TARGET_TYPE
on the arg type of a constructor only if it is of reference type.
gdb/testsuite/ChangeLog:
* gdb.cp/non-trivial-retval.cc: Add a test case.
* gdb.cp/non-trivial-retval.exp: Add a test.
2014-10-22 Tejas Belagod <tejas.belagod@arm.com>
bfd/
* bfd-in.h (bfd_elf64_aarch64_set_options): Add a parameter.
* bfd-in2.h (bfd_elf64_aarch64_set_options): Likewise.
* elfnn-aarch64.c (aarch64_erratum_835769_stub): New.
(elf_aarch64_stub_type): Add new type
aarch64_stub_erratum_835769_veneer.
(elf_aarch64_stub_hash_entry): New fields for erratum 835769.
(aarch64_erratum_835769_fix): New data struct to record erratum
835769.
(elf_aarch64_link_hash_table: Global flags for 835769.
(aarch64_build_one_stub): Add case for 835769.
(aarch64_size_one_stub): Likewise.
(aarch64_mem_op_p, aarch64_mlxl_p,
aarch64_erratum_sequence,erratum_835769_scan):
New. Decode and scan functions for erratum 835769.
(elf_aarch64_create_or_find_stub_sec): New.
(elfNN_aarch64_size_stubs): Look for erratum 835769 and record
them.
(bfd_elfNN_aarch64_set_options: Set global flag for 835769.
(erratum_835769_branch_to_stub_data,
make_branch_to_erratum_835769_stub):New. Connect up all the
erratum stubs to occurances by branches.
(elfNN_aarch64_write_section): New hook.
(aarch64_map_one_stub): Output erratum stub symbol.
(elfNN_aarch64_size_dynamic_sections): Init mapping symbol
information for erratum 835769.
(elf_backend_write_section): Define.
ld/
* emultempl/aarch64elf.em: Add command-line option for erratum
835769.
ld/testsuite/
* ld-aarch64/aarch64-elf.exp (aarch64elftests): Drive erratum
835769 tests.
* ld-aarch64/erratum835769.d: New.
* ld-aarch64/erratum835769.s: New.
elf32_arm_plt0_size and elf32_arm_plt_size read instructions
to determine what is size of PLT entry. However it does not
read instruction correctly in case of ARM big endian V7 case.
In this case instructions are still kept in little endian
order (BE8).
* elf32-arm.c (read_code32): New function to read 32 bit
arm instruction.
(read_code16): New function to read 16 bit thumb instrution.
(elf32_arm_plt0_size, elf32_arm_plt_size): Use read_code32
and read_code16 to read instructions.
bfd/
* elfxx-mips.c (print_mips_ases): Print unknown ASEs.
(print_mips_isa_ext): Print the value of an unknown extension.
binutils/
* readelf.c (print_mips_ases): Print unknown ASEs.
(print_mips_isa_ext): Print the value of an unknown extension.
include/
* elf/mips.h (AFL_ASE_MASK): Define.
This makes sure `HAVE_CODE_COMPRESSION' evaluates correctly when the
`.insn' directive is used at the beginning of a source file before any
instructions have been produced and that ELF file header's MIPS16 and
microMIPS ASE flags are set correctly in the case where no instructions
have been produced other than with the said directive.
gas/
* config/tc-mips.c (s_insn): Set file options.
gas/testsuite/
* gas/mips/insn-opts.d: New test.
* gas/mips/insn-opts.s: New test source.
* gas/mips/mips.exp: Run the new test.
This patch adds -mcpu=thunderx support to gas.
OK? Tested with no regressions.
ChangeLog:
* config/tc-aarch64.c (aarch64_cpus):
Add thunderx.
* doc/c-aarch64.texi: Document that thunderx
is a valid processor name.
The code in ppc64_elf_tls_optimize looking at the .toc is only
interested in .toc entries that are addresses. .toc can contain more
than just an array of addresses, so if we have items that aren't
8-byte aligned, ignore them.
* elf64-ppc.c (ppc64_elf_tls_optimize): Ignore relocs against toc
entries that aren't a multiple of 8 rather than failing assertion.
The construct being added to the cond.s test case otherwise triggered
both the "missing closing ..." and the "stray ..." (twice) warnings in
_find_end_of_line(). As that code fragments suggests, this is needed to
support (include) files that can be used for both assembler .include
and compiler #include directives.
Asserting "idx" to be non-negative when subsequent code handles this
case is bogus. In fact the assertion triggers e.g. when mistakenly
using the arm32 comment character @ following an instruction.
While doing this I also noticed that despite there being local
variables "detail" and "idx", not all places where they could be used
did actually make use of them, so this is being adjusted at once.
Finally, for the code to be slightly more robust, also change
comparisons against -1 to such checking for a (non-)negative value.
powerpc64 ld builds plt call stubs with a read barrier to provide
thread safety on lazy plt updates, necessary on multi-threaded apps
with power7 or later weakly ordered memory. gcc-4.9 libgomp
introduced more functions that could call pthread_create, which means
we have more functions that if referenced in an executable should
cause a default of --plt-thread-safe.
* elf64-ppc.c (ppc64_elf_size_stubs): Add gcc-4.9 libgomp functions
to thread_starter.
First:
"Breakpoint.delete" is missing parenthesis.
Second:
Someone on IRC asked, how come there is no disable() method in the
Breakpoint object. It turns out you have to do "bp.enabled = False".
Since every normal person would probably search for "disable" in that page
if their intent is to disable a python breakpoint, I thought it would be
useful if the description contained "disable" so it would be easy to find.
The result might seem a bit silly and redundant, so I am open to
suggestions.
gdb/doc/ChangeLog:
* python.texi (Breakpoints In Python): Add parenthesis after
Breakpoint.delete. Clarify Breakpoint.enabled description so
that it contains "disable".
Patch <https://sourceware.org/ml/gdb-patches/2011-07/msg00225.html> was
to fix the problem that py-objfile-script-gdb.py is removed after an
in-tree build and test. As a result of the previous patch (we don't
remove files copied to host any more), this patch is no longer needed.
This patch is to revert it logically.
gdb/testsuite:
2014-10-20 Yao Qi <yao@codesourcery.com>
* gdb.python/py-objfile-script-gdb.py.in: Rename it to ...
* gdb.python/py-objfile-script-gdb.py: New file.
* gdb.python/py-objfile-script.exp: Update reference to
py-objfile-script-gdb.py.in. Use gdb_remote_donwload instead
of remote_download. Remove the dest file.
Nowadays, if we do in-tree build and run tests sequentially, some source
files are removed, due to the following pattern:
set pi_txt [gdb_remote_download host ${srcdir}/${subdir}/pi.txt]
remote_exec host "rm -f $pi_txt"
If testing is run sequentially, file ${srcdir}/${subdir}/pi.txt is
copied to ${objdir}/${subdir}/pi.txt. However, ${objdir} is ${srcdir}
in the in-tree build/test, so the file is coped to itself, as a nop.
As a result, the file in source is removed at the end of test.
This patch fixes this problem by not removing files copied to host in
each test. This patch also addresses the question we've had that why
don't we keep files copied to host because they are needed to reproduce
certain fails.
gdb/testsuite:
2014-10-20 Yao Qi <yao@codesourcery.com>
* gdb.base/checkpoint.exp: Don't remove file copied on host.
* gdb.base/step-line.exp: Likewise.
* gdb.dwarf2/dw2-anonymous-func.exp: Likewise.
* gdb.dwarf2/dw2-basic.exp: Likewise.
* gdb.dwarf2/dw2-compressed.exp: Likewise.
* gdb.dwarf2/dw2-filename.exp: Likewise.
* gdb.dwarf2/dw2-intercu.exp: Likewise.
* gdb.dwarf2/dw2-intermix.exp: Likewise.
* gdb.dwarf2/dw2-producer.exp: Likewise.
* gdb.dwarf2/mac-fileno.exp: Likewise.
* gdb.python/py-frame-args.exp: Likewise.
* gdb.python/py-framefilter.exp: Likewise.
* gdb.python/py-mi.exp: Likewise.
* gdb.python/py-objfile-script.exp: Likewise
* gdb.python/py-pp-integral.exp: Likewise.
* gdb.python/py-pp-re-notag.exp: Likewise.
* gdb.python/py-prettyprint.exp: Likewise.
* gdb.python/py-section-script.exp: Likewise.
* gdb.python/py-typeprint.exp: Likewise.
* gdb.python/py-xmethods.exp: Likewise.
* gdb.stabs/weird.exp: Likewise.
* gdb.xml/tdesc-regs.exp: Likewise.
This patch fixes the failures that occur with the
gdb.dwarf2/dw2-dir-file-name.exp test on 64-bit MIPS and compressed
MIPS ISAs (i.e. MIPS16 and microMIPS).
The failures on 64-bit occur because the generated DWARF address
information is always 32-bit, which causes the upper 32-bits of
addresses to be truncated and causes breakpoints to be set on the
wrong address if any of the upper 32-bits are non-zero. I suspect
that other 64-bit architectures get away with it because they
place all their instructions at a VMA lower than 2^32 by default.
This patch causes 64-bit addresses to be generated if a 64-bit
target is detected.
The failures on MIPS16 and microMIPS occur because the breakpoint
address needs to have the LSB set to 1 (used to indicate that the
code is compressed). However, the function name is interpreted as
a data label, causing GDB to set breakpoints at even addresses.
This is fixed by explicitly adding a '.insn' directive (see
https://sourceware.org/binutils/docs/as/MIPS-insn.html) after the
label on MIPS only.
gdb/testsuite/
2014-10-18 Kwok Cheung Yeung <kcy@codesourcery.com>
* gdb.dwarf2/dw2-dir-file-name.exp (addr_len): New.
(out_cu): Use addr_len for the size of addresses.
(out_line): Likewise. Size DW_LNE_set_address instruction
according to addr_len.
* gdb.dwarf2/dw2-dir-file-name.c (START_INSNS): New.
(FUNC): Add START_INSNS to definition.
I see the following two fails on arm-none-eabi target, because argv[0]
isn't available.
print argv[0]^M
$1 = 0x1f78 "/dev/null"^M
(gdb) FAIL: gdb.base/argv0-symlink.exp: kept file symbolic link name
print argv[0]^M
$1 = 0x1f78 "/dev/null"^M
(gdb) FAIL: gdb.base/argv0-symlink.exp: kept directory symbolic link name
My first thought is to check [target_info exists noargs], and skip the
test if it returns true. However, noargs is set in gdbserver board
files, so argv0-symlink.exp will be skipped on gdbserver board file.
The change is too aggressive.
When the program is running with gdbserver, argv[1] to argv[N] aren't
available, but argv[0] is. Fortunately, argv0-symlink.exp only
requires argv[0]. argv0-symlink.exp can be run with gdbserver board
file, as what we do now.
What we need to check is whether argv[0] is available, so I add a new
proc gdb_has_argv0 to do so by starting a program, and check
argc/argv[0] to see whether argv[0] is available.
Dan fixed the similar problem by checking noargs, which is too strong.
https://sourceware.org/ml/gdb-patches/2010-02/msg00398.html as a
result, the test is skipped on gdbserver. This patch fixed it too.
gdb/testsuite:
2014-10-18 Yao Qi <yao@codesourcery.com>
* gdb.base/argv0-symlink.exp: Check argv[0] value if
gdb_has_argv0 return true.
* gdb.guile/scm-value.exp (test_value_in_inferior): Don't
check [target_info exists noargs], check [gdb_has_argv0]
instead.
* gdb.python/py-value.exp (test_value_in_inferior): Likewise.
* lib/gdb.exp (gdb_has_argv0, gdb_has_argv0_1): New
procedures.
When functions are emitted in comdat groups, global symbols defined in
duplicates of the group are treated as if they were undefined. That
prevents the symbols in the discarded sections from affecting the
linker's global symbol hash table or causing duplicate symbol errors.
Annoyingly, when gcc emits a function to a comdat group, it does not
put *all* of a function's code and data in the comdat group.
Typically, constant tables, exception handling info, and debug info
are emitted to normal sections outside of the group, which is a
perennial source of linker problems due to the special handling needed
to deal with the extra-group pieces that ought to be discarded. In
the case of powerpc64-gcc, the OPD entry for a function is not put in
the group. Since the function symbol is defined on the OPD entry this
means we need to handle symbols in .opd specially.
To see how this affects LTO in particular, consider the linker
testcase PR ld/12942 (1). This testcase links an LTO object file
pr12942a.o with a normal (non-LTO) object pr12942b.o. Both objects
contain a definition for _Z4testv in a comdat group. On loading
pr12942a.o, the linker sees a comdat group (actually linkonce section)
for _Z4testv and a weak _Z4testv defined in the IR. On loading
pr12942b.o, the linker sees the same comdat group, and thus discards
it. However, _Z4testv is a weak symbol defined in .opd, not part of
the group, so this weak symbol overrides the weak IR symbol. On
(re)loading the LTO version of pr12942a.o, the linker sees another
weak _Z4testv, but this one does not override the value we have from
pr12942b.o. The result is a linker complaint about "`_Z4testv'
... defined in discarded section `.group' of tmpdir/pr12942b.o".
* elf64-ppc.c (ppc64_elf_add_symbol_hook): If function code
section for function symbols defined in .opd is discarded, let
the symbol appear to be undefined.
(opd_entry_value): Ensure the result section is that for the
function code section in the same object as the OPD entry.
The write.c change is to make gas report an error if reg_section
symbols should leak in future. The tc-i386.c change is the real fix.
Note that the error isn't the most helpful, "redefined symbol cannot
be used on reloc", but I'm not inclined to improve what is really an
internal gas error. reg_section symbols shouldn't leak..
gas/
PR 17493
* write.c (adjust_reloc_syms): Don't allow symbols in reg_section
to be reduced to reg_section section symbol.
* gas/config/tc-i386.c (i386_finalize_immediate): Reject all
reg_section immediates.
gas/testsuite/
* gas/i386/inval-equ-2.l: Adjust.
This patch annotates the following SPARC instructions as VIS3B
instructions: ldx *, %efsr, fpadd64, fpsub64, fpcmpule8, fpcmpune8,
fpcmpugt8, fpcmpueq8. It also improves the documentation of the VIS3B
capability in several headers.
Tested in sparc64-unknown-linux-gnu and sparc-unknown-linux-gnu.
No visible regressions.
opcodes/ChangeLog:
2014-10-17 Jose E. Marchesi <jose.marchesi@oracle.com>
* sparc-opc.c (sparc-opcodes): Annotate several instructions with
the HWCAP2_VIS3B hwcap.
include/opcodes/ChangeLog:
2014-10-17 Jose E. Marchesi <jose.marchesi@oracle.com>
* sparc.h (HWCAP2_VIS3B): Documentation improved.
include/elf/ChangeLog:
2014-10-17 Jose E. Marchesi <jose.marchesi@oracle.com>
* sparc.h (ELF_SPARC_HWCAP2_VIS3B): Documentation improved.
This patch fixes the hwcap entries in `sparc-opcodes' (which were
incorrectly located in the flags field) for the following
instructions:
wr r,r,%sys_tick
wr r,i,%sys_tick
wr r,r,%sys_tick_cmpr
wr r,i,%sys_tick_cmpr
edge8n edge8ln edge16n edge16ln edge32n edge32ln
bmask bshuffle siam
Tested in sparc-unknown-linux-gnu and sparc64-unknown-linux-gnu.
No visible regressions.
opcodes/ChangeLog:
2014-10-17 Jose E. Marchesi <jose.marchesi@oracle.com>
* sparc-opc.c (sparc-opcodes): Fix several misplaced hwcap
entries.
If one is watching new_objfile events in python, it helps to know
when the list of objfiles is cleared. This patch adds a new
clear_objfiles event to support this.
This patch is all just cut-n-paste-n-tweak derived from
the new_objfiles event.
gdb/ChangeLog:
* NEWS: Mention new event gdb.clear_objfiles.
* python/py-event.h (emit_clear_objfiles_event): Clear
* python/py-events.h (events_object): New member clear_objfiles.
* python/py-evts.c (gdbpy_initialize_py_events): Add clear_objfiles
event.
* python/py-inferior.c (python_new_objfile): If objfile is NULL,
emit clear_objfiles event.
* python/py-newobjfileevent.c (create_clear_objfiles_event_object): New
function.
(emit_clear_objfiles_event): New function.
(clear_objfiles): New event.
* python/python-internal.h (gdbpy_initialize_clear_objfiles_event):
Declare.
* python/python.c (_initialize_python): Call
gdbpy_initialize_clear_objfiles_event.
gdb/doc/ChangeLog:
* python.texi (Events In Python): Document clear_objfiles event.
gdb/testsuite/ChangeLog:
* gdb.python/py-events.exp: Update expected output for clear_objfiles
event.
* gdb.python/py-events.py: Add clear_objfiles event.
gdb/ChangeLog:
* NEWS: Mention new gdb.Objfile.progspace attribute.
* python/py-objfile.c (objfpy_get_progspace): New function.
(objfile_getset): New entry for "progspace".
gdb/doc/ChangeLog:
* python.texi (Objfiles In Python): Document new progspace attribute.
gdb/testsuite/ChangeLog:
* gdb.python/py-objfile.exp: Test progspace attribute.
Some testcases, mostly gdb.reverse ones, assume the presence of a
'/' directory separator before the source file name. This is
incorrect for mingw32 hosts, generating false failures for those
tests.
I attempted to catch most of the occurrences of the pattern
".*/$srcfile" and replaced them with ".*$srcfile". The latter
is used elsewhere in the testsuite. The resulting patch is attached.
I also see other occurrences of the same assumption throughout the
testsuite, but usually they are arguments for function calls and i
seem to recall either the test harness or GDB deals with those
paths properly.
gdb/testsuite:
2014-10-17 Luis Machado <lgustavo@codesourcery.com>
* gdb.guile/scm-breakpoint.exp: Do not assume any
directory separators when matching source file paths.
* gdb.python/py-breakpoint.exp: Likewise.
* gdb.reverse/break-precsave.exp: Likewise.
* gdb.reverse/break-reverse.exp: Likewise.
* gdb.reverse/consecutive-precsave.exp: Likewise.
* gdb.reverse/finish-precsave.exp: Likewise.
* gdb.reverse/finish-reverse-bkpt.exp: Likewise.
* gdb.reverse/finish-reverse.exp: Likewise.
* gdb.reverse/i386-precsave.exp: Likewise.
* gdb.reverse/i387-env-reverse.exp: Likewise.
* gdb.reverse/i387-stack-reverse.exp: Likewise.
* gdb.reverse/machinestate-precsave.exp: Likewise.
* gdb.reverse/machinestate.exp: Likewise.
* gdb.reverse/sigall-precsave.exp: Likewise.
* gdb.reverse/solib-precsave.exp: Likewise.
* gdb.reverse/step-precsave.exp: Likewise.
* gdb.reverse/until-precsave.exp: Likewise.
* gdb.reverse/watch-precsave.exp: Likewise.
* gdb.reverse/watch-reverse.exp: Likewise.
When I run test with board file local-remote-host-native.exp, I see
the following warning,
$ make check RUNTESTFLAGS="--host_board=local-remote-host-native
--target_board=local-remote-host-native tdesc-arch.exp
HOST_DIR=/tmp/foo/"
(gdb) set tdesc filename ../../../../git/gdb/testsuite/gdb.xml/trivial.xml^M
warning: Could not open "../../../../git/gdb/testsuite/gdb.xml/trivial.xml"
(gdb) quit^
because "${srcdir}/gdb.xml/trivial.xml" doesn't exist on host. This
patch is to copy trivial.xml to host and the warning goes away.
(gdb) set tdesc filename /tmp/foo/trivial.xml^M
(gdb) quit^
tdesc-regs.exp has the similar problem that single-reg.xml may not
exist on host at all, and it should be copied to host too.
gdb/testsuite:
2014-10-17 Yao Qi <yao@codesourcery.com>
* lib/gdb.exp (gdb_skip_xml_test): Copy trivial.xml to host.
* gdb.xml/tdesc-regs.exp: Copy single-reg.xml to host.
When we repeat a command, by just pressing <ret>, the input from the
previous command is reused for the new command invocation.
When an execution command strips the "&" out of its incoming argument
string, to detect background execution, we poke a '\0' directly to the
incoming argument string.
Combine both, and a repeat of a background command loses the "&".
This is actually only visible if args other than "&" are specified
(e.g., "c 1&" or "next 2&" or "c -a&"), as in the special case of "&"
alone (e.g. "c&") doesn't actually clobber the incoming string.
Fix this by making strip_bg_char return a new string instead of poking
a hole in the input string.
New test included.
Tested on x86_64 Fedora 20, native and gdbserver.
gdb/
2014-10-17 Pedro Alves <palves@redhat.com>
PR gdb/17471
* infcmd.c (strip_bg_char): Change prototype and rewrite. Now
returns a copy of the input.
(run_command_1, continue_command, step_1, jump_command)
(signal_command, until_command, advance_command, finish_command)
(attach_command): Adjust and install a cleanup to free the
stripped args.
gdb/testsuite/
2014-10-17 Pedro Alves <palves@redhat.com>
PR gdb/17471
* gdb.base/bg-execution-repeat.c: New file.
* gdb.base/bg-execution-repeat.exp: New file.
If all threads in the target were already running when the user does
"c -a", nothing puts the inferior's terminal settings in effect and
removes stdin from the event loop, which we must when running a
foreground command. The result is that user input afterwards crashes
readline/gdb:
(gdb) start
Temporary breakpoint 1 at 0x4005d4: file continue-all-already-running.c, line 23.
Starting program: continue-all-already-running
Temporary breakpoint 1, main () at continue-all-already-running.c:23
23 sleep (10);
(gdb) c -a&
Continuing.
(gdb) c -a
Continuing.
p 1
readline: readline_callback_read_char() called with no handler!
Aborted (core dumped)
$
Backtrace:
Program received signal SIGABRT, Aborted.
0x0000003b36a35877 in __GI_raise (sig=sig@entry=6) at ../nptl/sysdeps/unix/sysv/linux/raise.c:56
56 return INLINE_SYSCALL (tgkill, 3, pid, selftid, sig);
(top-gdb) p 1
$1 = 1
(top-gdb) bt
#0 0x0000003b36a35877 in __GI_raise (sig=sig@entry=6) at ../nptl/sysdeps/unix/sysv/linux/raise.c:56
#1 0x0000003b36a36f68 in __GI_abort () at abort.c:89
#2 0x0000000000784aa9 in rl_callback_read_char () at readline/callback.c:116
#3 0x0000000000619181 in rl_callback_read_char_wrapper (client_data=0x0) at gdb/event-top.c:167
#4 0x0000000000619557 in stdin_event_handler (error=0, client_data=0x0) at gdb/event-top.c:373
#5 0x000000000061814a in handle_file_event (data=...) at gdb/event-loop.c:763
#6 0x0000000000617631 in process_event () at gdb/event-loop.c:340
#7 0x00000000006176f8 in gdb_do_one_event () at gdb/event-loop.c:404
#8 0x0000000000617748 in start_event_loop () at gdb/event-loop.c:429
#9 0x00000000006191b3 in cli_command_loop (data=0x0) at gdb/event-top.c:182
#10 0x000000000060f538 in current_interp_command_loop () at gdb/interps.c:318
#11 0x0000000000610701 in captured_command_loop (data=0x0) at gdb/main.c:323
#12 0x000000000060c3f5 in catch_errors (func=0x6106e6 <captured_command_loop>, func_args=0x0, errstring=0x9002c1 "", mask=RETURN_MASK_ALL)
at gdb/exceptions.c:237
#13 0x0000000000611bff in captured_main (data=0x7fffffffd780) at gdb/main.c:1151
#14 0x000000000060c3f5 in catch_errors (func=0x610afe <captured_main>, func_args=0x7fffffffd780, errstring=0x9002c1 "", mask=RETURN_MASK_ALL)
at gdb/exceptions.c:237
#15 0x0000000000611c28 in gdb_main (args=0x7fffffffd780) at gdb/main.c:1159
#16 0x000000000045ef97 in main (argc=5, argv=0x7fffffffd888) at gdb/gdb.c:32
(top-gdb)
Tested on x86_64 Fedora 20, native and gdbserver.
gdb/
2014-10-17 Pedro Alves <palves@redhat.com>
PR gdb/17300
* infcmd.c (continue_1): If continuing all threads in the
foreground, make sure the inferior's terminal settings are put in
effect.
gdb/testsuite/
2014-10-17 Pedro Alves <palves@redhat.com>
PR gdb/17300
* gdb.base/continue-all-already-running.c: New file.
* gdb.base/continue-all-already-running.exp: New file.
Jan caught an intermittent GDB crash with the annota1.exp test:
Starting program: .../gdb/testsuite/gdb.base/annota1 ^M
[...]
FAIL: gdb.base/annota1.exp: run until main breakpoint (timeout)
[...]
readline: readline_callback_read_char() called with no handler!^M
ERROR: Process no longer exists
All we need to is to continue the inferior in the foreground, and type
a command while the inferior is running. E.g.:
(gdb) set annotate 2
▒▒pre-prompt
(gdb)
▒▒prompt
c
▒▒post-prompt
Continuing.
▒▒starting
▒▒frames-invalid
*inferior is running now*
p 1<ret>
readline: readline_callback_read_char() called with no handler!
Aborted (core dumped)
$
When we run a foreground execution command we call
target_terminal_inferior to stop GDB from processing input, and to put
the inferior's terminal settings in effect. Then we tell readline to
hide the prompt with display_gdb_prompt, which clears readline's input
callback too. When the target stops, we call target_terminal_ours,
which re-installs stdin in the event loop, and then we redisplay the
prompt, reinstalling the readline callbacks.
However, when annotations are in effect, the "frames-invalid"
annotation code calls target_terminal_ours after 'resume' had already
called target_terminal_inferior:
(top-gdb) bt
#0 0x000000000056b82f in annotate_frames_invalid () at gdb/annotate.c:219
#1 0x000000000072e6cc in reinit_frame_cache () at gdb/frame.c:1705
#2 0x0000000000594bb9 in registers_changed_ptid (ptid=...) at gdb/regcache.c:612
#3 0x000000000064cca1 in target_resume (ptid=..., step=1, signal=GDB_SIGNAL_0) at gdb/target.c:2136
#4 0x00000000005f57af in resume (step=1, sig=GDB_SIGNAL_0) at gdb/infrun.c:2263
#5 0x00000000005f6051 in proceed (addr=18446744073709551615, siggnal=GDB_SIGNAL_DEFAULT, step=1) at gdb/infrun.c:2613
And then once we hide the prompt and remove readline's input handler
callback, we're in a bad state. We end up with the target running
supposedly in the foreground, but with stdin still installed on the
event loop. Any input then calls into readline, which aborts because
no rl_linefunc callback handler is installed:
Program received signal SIGABRT, Aborted.
0x0000003b36a35877 in __GI_raise (sig=sig@entry=6) at ../nptl/sysdeps/unix/sysv/linux/raise.c:56
56 return INLINE_SYSCALL (tgkill, 3, pid, selftid, sig);
(top-gdb) bt
#0 0x0000003b36a35877 in __GI_raise (sig=sig@entry=6) at ../nptl/sysdeps/unix/sysv/linux/raise.c:56
#1 0x0000003b36a36f68 in __GI_abort () at abort.c:89
During symbol reading, debug info gives source 9 included from file at zero line 0.
During symbol reading, debug info gives command-line macro definition with non-zero line 19: _STDC_PREDEF_H 1.
#2 0x0000000000784a25 in rl_callback_read_char () at src/readline/callback.c:116
#3 0x0000000000619111 in rl_callback_read_char_wrapper (client_data=0x0) at src/gdb/event-top.c:167
#4 0x00000000006194e7 in stdin_event_handler (error=0, client_data=0x0) at src/gdb/event-top.c:373
#5 0x00000000006180da in handle_file_event (data=...) at src/gdb/event-loop.c:763
#6 0x00000000006175c1 in process_event () at src/gdb/event-loop.c:340
#7 0x0000000000617688 in gdb_do_one_event () at src/gdb/event-loop.c:404
#8 0x00000000006176d8 in start_event_loop () at src/gdb/event-loop.c:429
#9 0x0000000000619143 in cli_command_loop (data=0x0) at src/gdb/event-top.c:182
#10 0x000000000060f4c8 in current_interp_command_loop () at src/gdb/interps.c:318
#11 0x0000000000610691 in captured_command_loop (data=0x0) at src/gdb/main.c:323
#12 0x000000000060c385 in catch_errors (func=0x610676 <captured_command_loop>, func_args=0x0, errstring=0x900241 "", mask=RETURN_MASK_ALL)
at src/gdb/exceptions.c:237
#13 0x0000000000611b8f in captured_main (data=0x7fffffffd7b0) at src/gdb/main.c:1151
#14 0x000000000060c385 in catch_errors (func=0x610a8e <captured_main>, func_args=0x7fffffffd7b0, errstring=0x900241 "", mask=RETURN_MASK_ALL)
at src/gdb/exceptions.c:237
#15 0x0000000000611bb8 in gdb_main (args=0x7fffffffd7b0) at src/gdb/main.c:1159
#16 0x000000000045ef57 in main (argc=3, argv=0x7fffffffd8b8) at src/gdb/gdb.c:32
The fix is to make the annotation code call target_terminal_inferior
again after printing, if the inferior's settings were in effect.
While at it, when we're doing output only, instead of
target_terminal_ours, we should call target_terminal_ours_for_output.
The latter doesn't actually remove stdin from the event loop, and also
leaves SIGINT forwarded to the target.
New test included.
Tested on x86_64 Fedora 20, native and gdbserver.
gdb/
2014-10-17 Pedro Alves <palves@redhat.com>
PR gdb/17472
* annotate.c (annotate_breakpoints_invalid): Use
target_terminal_our_for_output instead of target_terminal_ours.
Give back the terminal to the target.
(annotate_frames_invalid): Likewise.
gdb/testsuite/
2014-10-17 Pedro Alves <palves@redhat.com>
PR gdb/17472
* gdb.base/annota-input-while-running.c: New file.
* gdb.base/annota-input-while-running.exp: New file.
I found a place that should be giving back the terminal to the target,
but only if the target was already owning it. So I need to add a
getter for who owns the terminal.
The trouble is that several places/target have their own globals to
track this state:
- inflow.c:terminal_is_ours
- remote.c:remote_async_terminal_ours_p
- linux-nat.c:async_terminal_is_ours
- go32-nat.c:terminal_is_ours
While one might think of adding a new target_ops method to query this,
conceptually, this state isn't really part of a particular target_ops.
Considering multi-target, the core shouldn't have to ask all targets
to know whether it's GDB that owns the terminal. There's only one GDB
(or rather, only one top level interpreter).
So what this comment does is add a new global that is tracked by the
core instead. A subsequent pass may later remove the other globals.
Tested on x86_64 Fedora 20, native and gdbserver.
gdb/
2014-10-17 Pedro Alves <palves@redhat.com>
* target.c (enum terminal_state): New enum.
(terminal_state): New global.
(target_terminal_init): New function.
(target_terminal_inferior): Skip if inferior already owns the
terminal.
(target_terminal_ours, target_terminal_ours_for_output): New
functions.
* target.h (target_terminal_init): Convert to function prototype.
(target_terminal_ours_for_output): Convert to function prototype
and tweak comment.
(target_terminal_ours): Convert to function prototype and tweak
comment.
* windows-nat.c (do_initial_windows_stuff): Call
target_terminal_init instead of child_terminal_init_with_pgrp.
* ld-scripts/sysroot-prefix.exp: Log $ld_sysroot. Handle sysroot
== "/" as a separate sysroot-configuration with separable
test-types.
(sysroot_prefix_tests): Include all existing sysroot tests in
sysroot == "/" tests except exclude those where a --sysroot option
is not specified.
* lib/ld-lib.exp (check_sysroot_available): Rewrite to use
--print-sysroot instead of relying on error code from using
--sysroot=... Also, set $ld_sysroot.
The reason we exclude not just the failing "full-path =-prefixed
without" but also the passing "plain =-prefixed without but -Lpath"
for sysroot == "/" is that for the latter to succeed, we have to make
assumptions about the system not having a /sysroot directory or
assumptions about its contents etc.
When passing --enable-targets=all --enable-64-bit-bfd (the
latter not required for a "64-bit-host" of course) the ld --help
output got too much to handle for poor tcl (or maybe dejagnu is
to blame) and remote_exec exited with an error, so the
configuration being tested was mishandled as being a
sysroot-less configuration. Using --version instead of --help
would work too, but the new --print-sysroot option calls for
nominal coverage, so why not use that instead.
This commit does most of the mechanical removal. IOW, the easy part.
procfs.c isn't touched beyond removing a couple obvious bits that are
guarded by a couple macros defined in config/alpha/nm-osf3.h. Going
beyond that for procfs.c & co would be a harder excision that
potentially affects Solaris.
Some comments in the generic alpha code ABIs that may still be
relevant and I wouldn't know what to do with them. That can always be
done on a separate pass, preferably by someone who can test on alpha.
A couple other spots have references to OSF/Tru64 and related files
being removed, but it felt like removing them would make things worse,
not better. We can revisit those when we next need to touch that
code.
I didn't remove a reference to osf in testsuite/lib/future.exp, as I
believe that code is imported from DejaGNU.
Built and tested on x86_64 Fedora 20, with --enable-targets=all.
Tested that building for --target=alpha-osf3 on x86_64 Fedora 20
fails with:
checking for default auto-load directory... $debugdir:$datadir/auto-load
checking for default auto-load safe-path... $debugdir:$datadir/auto-load
*** Configuration alpha-unknown-osf3 is obsolete.
*** Support has been REMOVED.
make[1]: *** [configure-gdb] Error 1
make[1]: Leaving directory `build-osf'
make: *** [all] Error 2
gdb/
2014-10-17 Pedro Alves <palves@redhat.com>
* Makefile.in (ALL_64_TARGET_OBS): Remove alpha-osf1-tdep.o.
(HFILES_NO_SRCDIR): Remove config/alpha/nm-osf3.h.
(ALLDEPFILES): Remove alpha-nat.c, alpha-osf1-tdep.c and
solib-osf.c.
* NEWS: Mention that support for alpha*-*-osf* has been removed.
* ada-lang.h [__alpha__ && __osf__]
(ADA_KNOWN_RUNTIME_FILE_NAME_PATTERNS): Delete.
* alpha-nat.c, alpha-osf1-tdep.c: Delete files.
* alpha-tdep.c (alpha_gdbarch_init): Remove reference to
GDB_OSABI_OSF1.
* config/alpha/alpha-osf3.mh, config/alpha/nm-osf3.h: Delete
files.
* config/djgpp/fnchange.lst (config/alpha/alpha-osf1.mh)
(config/alpha/alpha-osf2.mh, config/alpha/alpha-osf3.mh): Delete.
* configure: Regenerate.
* configure.ac: Remove references to osf.
* configure.host: Handle alpha*-*-osf* in the obsolete hosts
section. Remove all other references to osf.
* configure.tgt: Add alpha*-*-osf* to the obsolete targets section.
Remove all other references to osf.
* dec-thread.c: Delete file.
* defs.h (GDB_OSABI_OSF1): Delete.
* inferior.h (START_INFERIOR_TRAPS_EXPECTED): New unconditionally
defined.
* osabi.c (gdb_osabi_names): Delete "OSF/1".
* procfs.c (procfs_debug_inferior) [PROCFS_DONT_TRACE_FAULTS]:
Delete code.
(unconditionally_kill_inferior)
[PROCFS_NEED_CLEAR_CURSIG_FOR_KILL]: Delete code.
* solib-osf.c: Delete file.
gdb/testsuite/
2014-10-17 Pedro Alves <palves@redhat.com>
* gdb.base/callfuncs.exp: emove references to osf.
* gdb.base/sigall.exp: Likewise.
* gdb.gdb/selftest.exp: Likewise.
* gdb.hp/gdb.base-hp/callfwmall.exp: Likewise.
* gdb.mi/non-stop.c: Likewise.
* gdb.mi/pthreads.c: Likewise.
* gdb.reverse/sigall-precsave.exp: Likewise.
* gdb.reverse/sigall-reverse.exp: Likewise.
* gdb.threads/pthreads.c: Likewise.
* gdb.threads/pthreads.exp: Likewise.
gdb/doc/
2014-10-17 Pedro Alves <palves@redhat.com>
* gdb.texinfo (Ada Tasks and Core Files): Delete mention of Tru64.
(SVR4 Process Information): Delete mention of OSF/1.
clear_threads_listing_context is used for thread listing methods other
than the xml based, but it's only defined when HAVE_LIBEXPAT is defined.
gdb/
2014-10-17 Pedro Alves <palves@redhat.com>
* remote.c (clear_threads_listing_context): Move higher up, out of
the HAVE_LIBEXPAT guard.
