* Makefile.in (SFILES): Add common/mips-linux-watch.c.
(mips-linux-watch.o): New rule.
(mips_linux_watch_h): New variable.
* configure.srv <mips*-*-linux*>: Add mips-linux-watch.o to
srv_tgtobj.
* linux-mips-low.c: Include mips-linux-watch.h.
(struct arch_process_info, struct arch_lwp_info): New.
(update_watch_registers_callback): New function.
(mips_linux_new_process, mips_linux_new_thread) New functions.
(mips_linux_prepare_to_resume, mips_insert_point): New
functions.
(mips_remove_point, mips_stopped_by_watchpoint): New
functions.
(rsp_bp_type_to_target_hw_bp_type): New function.
(mips_stopped_data_address): New function.
(the_low_target): Add watchpoint support functions.
gdb/
* NEWS: Mention that GDBserver now supports hardware
watchpoints on the MIPS GNU/Linux target.
* mips-linux-nat.c (get_irw_mask): Rename to ...
(mips_linux_watch_get_irw_mask): ... this. Rename parameter
'set' to 'n'. Update function comment. All callers changed.
(get_reg_mask): Rename parameter 'set' to 'n'. Update
function comment. All callers changed.
(get_num_valid): Rename to ...
(mips_linux_watch_get_num_valid): ... this. Rename parameter
'set' to 'n'. Update function comment. All callers changed.
(get_watchlo): Rename to ...
(mips_linux_watch_get_watchlo): ... this. Rename parameter
'set' to 'n'. Update function comment. All callers changed.
(set_watchlo): Rename to ...
(mips_linux_watch_set_watchlo): ... this. Rename parameter
'set' to 'n'. Update function comment. All callers changed.
(get_watchhi): Rename to ...
(mips_linux_watch_get_watchhi): ... this. Update function
comment. All callers changed.
(set_watchhi): Rename to ...
(mips_linux_watch_set_watchhi): ... this. Update function
comment. All callers changed.
(mips_linux_read_watch_registers): Update function comment.
Add new parameters 'lwpid', 'watch_readback', and
'watch_readback_valid'. Update.
(type_to_irw): Rename to ...
(mips_linux_watch_type_to_irw): ... this. Update function
comment. All callers changed.
(fill_mask): Update function comment.
(try_one_watch): Rename to ...
(mips_linux_watch_try_one_watch): ... this. Change the type
of parameter 'irw' from 'unsigned' to 'uint32_t'.
(populate_regs_from_watches): Rename to ...
(mips_linux_watch_populate_regs): ... this. Add parameter
'current_watches'. All callers changed.
of f77.
Allow for compiler variations of integer types.
Use mi_create_varobj.
Use mi_list_varobj_children for the immediate children of `array'.
Add "has_more" attribute for grandchildren test.
When GDB is run with IO redirected to a pipe, the 'interrupt' command
causes it to kill its own process group instead of the inferior's.
The problem manifests itself in async mode, native debugging:
$ cat | gdb <file>
(gdb) set target-async on
(gdb) run &
(gdb) interrupt
A debugging session is active.
Inferior 1 [process 20584] will be killed.
Quit anyway? (y or n) [answered Y; input not from terminal]
In this case, GDB tells that its stdin isn't a tty and doesn't save
the inferior's process group in
inflow.c:terminal_init_inferior_with_pgrp. The 'interrupt' command
tries to 'kill' the inferior's process group in
`inf-ptrace.c:inf_ptrace_stop`, but since that wasn't saved in the
first place, GDB kills process group 0, meaning, its own process
group.
When GDB is used from a frontend, that means killing its own process
group including the frontend and possibly the X session. This was
originally seen with SublimeGDB:
https://github.com/quarnster/SublimeGDB/issues/29.
The patch makes GDB save the inferior pgid regardless of having a
terminal, as pgid is used not only to reset foreground process group,
but also to interrupt the inferior process. It also adds a regression
test. Luckily, we can emulate not having a terminal with "set
interactive-mode off", avoiding the need of special magic to spawn gdb
with a pipe.
Tested on x86_64 Fedora 17.
gdb/
2013-07-26 Cyril Nikolaev <cyril@nichtverstehen.de>
* inflow.c (terminal_init_inferior_with_pgrp): Save inferior
process group regardless of having tty on stdin.
gdb/testsuite/
2013-07-26 Pedro Alves <palves@redhat.com>
* gdb.base/interrupt-noterm.c, gdb.base/interrupt-noterm.exp: New
files.
This patch fixes the target double-close problem (PR remote/15266),
and in the process removes pop_target entire (PR remote/15256).
The first issue is that pop_target calls target_close. However, it
then calls unpush_target, which also calls target_close. This means
targets must be able to be closed twice. Not only is this strange,
but it also directly contradicts the contract of to_xclose targets.
(We currently have just a single such target, and it is never pushed;
but I plan to add more, and so this latent bug is triggered.)
The second issue is that it seems to me that calling pop_target is
often unsafe. This is what cropped up in 15256, where the remote
target assumed that it could pop_target -- but there was another
target higher on the stack, leading to confusion.
But, it is always just as easy to call unpush_target as it is to call
pop_target; and it is also safer. So, removing pop_target seemed like
an improvement.
Finally, this adds an assertion to target_close to ensure that no
currently-pushed target can be closed.
Built and regtested on x86-64 Fedora 18; both natively and using the
native-gdbserver board file.
PR remote/15256, PR remote/15266:
* bfd-target.c (target_bfd_reopen): Initialize to_magic.
* monitor.c (monitor_detach): Use unpush_target.
* remote-m32r-sdi.c (m32r_detach): Use unpush_target.
* remote-mips.c (mips_detach): Use unpush_target. Don't
call mips_close.
* remote-sim.c (gdbsim_detach): Use unpush_target.
* target.c (pop_target): Remove.
(pop_all_targets_above): Don't call target_close.
(target_close): Assert that the target is unpushed.
* target.h (pop_target): Don't declare.
* tracepoint.c (tfile_open): Use unpush_target.
Right now, "help target" will include this line:
target multi-thread -- Threads and pthreads support
However, it doesn't make sense to invoke "target multi-thread".
This patch fixes the problem by not registering the multi-thread
target. add_target does some needed initialization of the target_ops,
so I broke this out into a new function.
It isn't clear to me whether this patch requires a test case or not.
I'm not sure whether there are other unregistered targets; but if
there are, it seems unlikely that we test for their absence from the
help.
Built and regtested on x86-64 Fedora 18.
* linux-thread-db.c (init_thread_db_ops): Call
complete_target_initialization.
(_initialize_thread_db): Don't call add_target.
* target.c (complete_target_initialization): New function.
(add_target_with_completer): Call it.
* target.h (complete_target_initialization): Declare.
* hppa-tdep.h (enum hppa_regnum): Add members for all space registers.
* hppaobsd-tdep.c (HPPAOBSD_SIZEOF_GREGS): Add comment.
(HPPANBSD_SIZEOF_GREGS): New define.
(hppaobsd_supply_gregset): Handle additional registers.
* hppabsd-nat.c (hppabsd_gregset_supplies_p): Adjust to indicate
we provide more registers now.
(hppabsd_supply_gregset): Supply additional registers.
(hppabsd_collect_gregset): Collect additional registers.
http://sourceware.org/ml/gdb-patches/2013-07/msg00236.html
gdb/ChangeLog
* mi/mi-main.c (output_register): Make MI 'r' format use standard
'z' format code. Remove error for optimized out values, standard
code will handle these fine.
gdb/testsuite/ChangeLog
* gdb.mi/mi-reg-undefined.exp: New file.
* gdb.mi/mi-reg-undefined.c: Likewise.
* gdb.mi/mi-reg-undefined.S: Likewise.
http://sourceware.org/ml/gdb-patches/2013-07/msg00235.html
gdb/ChangeLog
* NEWS: Mention new 'z' formatter.
* printcmd.c (print_scalar_formatted): Add new 'z' formatter.
(_initialize_printcmd): Mention 'z' formatter in help text of the
'x' command.
gdb/doc/ChangeLog
* gdb.texinfo (Output Formats): Mention the new 'z' formatter.
gdb/testsuite/ChangeLog
* gdb.base/printcmds.exp (test_print_int_arrays): Add tests for x,
z, o, and t output formats.
* gdb.base/display.exp: Use 'k' as an undefined format now that
'z' is defined.
* breakpoint.c (create_longjmp_master_breakpoint): Check if probe
interface can evaluate arguments. Fallback to the old mode if it
cannot.
(create_exception_master_breakpoint): Likewise.
* elfread.c (elf_can_evaluate_probe_arguments): New function.
(struct sym_probe_fns elf_probe_fns): Export function above to the
probe interface.
* probe.c (can_evaluate_probe_arguments): New function.
* probe.h (struct probe_ops) <can_evaluate_probe_arguments>: New
function pointer.
(can_evaluate_probe_arguments): New function prototype.
* solib-svr4.c (svr4_create_solib_event_breakpoints): Check if
probe interface can evaluate arguments. Fallback to the old mode
if it cannot.
* stap-probe.c (stap_get_probe_argument_count): Check if probe
interface can evaluate arguments. Warning the user if it cannot.
(stap_can_evaluate_probe_arguments): New function.
(struct probe_ops stap_probe_ops): Export function above to the
probe interface.
* symfile.h (struct sym_probe_fns) <can_evaluate_probe_arguments>:
New function pointer.
PR ld/15762
* ld-elf/shared.exp (build_tests): Check .gnu.warning section
in the libbarw.so library.
* ld-elf/libbarw.rd: New.
* lib/ld-lib.exp (run_cc_link_tests): Support checking on
output with warning message.
* gdb.mi/mi-var-cmd.exp: If host is remote, use ${testfile} on
host.
* gdb.mi/mi-basics.exp (test_exec_and_symbol_mi_operatons):
Likewise. If host is remote, copy ${binfile} to host.
init_cutu_and_read_dies creates an outer cleanup and uses its
immediately nested inner cleanup conditionally. This seems overly
complicated to me; simpler is to just deal with the outer cleanup and
drop the inner one. That is what this patch implements.
* dwarf2read.c (init_cutu_and_read_dies): Remove 'free_cu_cleanup'.
Simplify cleanup handling.
dwarf_decode_line_header has one return that is missing a call to
do_cleanups. This patch adds it.
This was found using the cleanup checker.
* dwarf2read.c (dwarf_decode_line_header): Call do_cleanups
on all return paths.
Without this patch, the DATE marker in gdb/version.in does not get
replaced by the source packaging date, causing the name of the
tarball being created to: have the DATE marker in the tarball
name and the name of the directory the sources unpack to (Eg:
gdb-7.6.50-DATE-cvs.tar instead of gdb-7.6.50-20130710-cvs.tar).
ChangeLog:
* src-release (VER): Use $(TOOL)/common/create-version.sh
if it exists.
* ppc-linux-nat.c (PPC_DEBUG_FEATURE_DATA_BP_DAWR): New define.
(ppc_linux_region_ok_for_hw_watchpoint): Add checking to use the new
DAWR interface for longer ranges hardware watchpoint (up to 512 bytes).
